ProductPRODUCT
Featured products
Contact Us
- Bently Nevada
- 2789-144
- 3300 Series Standard Extension Cable
- USA
- 12 feet
- 3 kg
- Xiamen, China
- New & In Stock
- T/T, PayPal, Western Union
- 1 Year
- 1-3 Working Days
- DHL, UPS, TNT, FedEx and EMS.
- 24-Hour Service
- COO
- 11
Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |
Product Overview
The Bently Nevada 2789-144 is a standard extension cable used in compatible Bently Nevada 3300 Series proximity transducer systems. It connects a proximity probe to the corresponding Proximitor Sensor, carrying the measurement signal between these components as part of a non-contact vibration and position monitoring arrangement.
In rotating machinery, shaft vibration and relative shaft position are important indicators of mechanical condition. A proximity probe detects changes in the distance between its sensing tip and a conductive target, typically a rotating shaft. The extension cable connects the probe to the signal-conditioning electronics, allowing the complete transducer system to provide measurements for machinery monitoring.
The 2789-144 has a cable length of 12 feet. Its standard cable configuration is intended for compatible installations where the probe, extension cable, and Proximitor Sensor must work together as a matched measurement system. Cable length is an important selection factor because the electrical characteristics of the complete transducer system depend on the combined probe and extension cable lengths.
A typical installation places the probe near a machine shaft, routes the extension cable through the machine or instrumentation wiring area, and connects it to the Proximitor Sensor. The sensor then supplies a conditioned output to a compatible machinery monitoring system. This arrangement is commonly used to monitor vibration and shaft position in rotating equipment.
For example, a compressor monitoring installation may use a proximity probe to measure shaft movement relative to the bearing housing. The 2789-144 extension cable connects the probe to the associated sensor, allowing the measurement to reach the monitoring electronics. Changes in the resulting signal can help maintenance personnel identify developing mechanical problems when interpreted alongside operating conditions and other measurements.
The cable is relevant to machinery such as compressors, pumps, turbines, and other fluid-film bearing machines where proximity measurements are used. It can also form part of a system used for rotational speed or Keyphasor reference measurements when the complete configuration supports that function.
The distinction between an extension cable and a complete transducer system is important. The 2789-144 is a cable component, not a standalone vibration sensor or monitor. It does not independently measure shaft movement, process the signal, or generate machinery alarms. Those functions depend on the connected probe, Proximitor Sensor, and monitoring equipment.
When replacing an existing cable, electrical compatibility matters as much as physical connection. The probe length, extension cable length, and Proximitor Sensor configuration must be compatible with the intended transducer system. An incorrectly configured cable assembly can affect measurement accuracy or prevent the system from operating within its specified performance limits.
The 2789-144 is therefore most useful when maintaining or restoring a compatible 3300 Series proximity measurement installation that requires a standard 12-foot extension cable.
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | Bently Nevada |
| Model | 2789-144 |
| Product Series | 3300 Series |
| Product Type | Standard Extension Cable |
| Product Category | Proximity Transducer System Component |
| Cable Length | 12 feet (3.65 m) |
| Cable Configuration | Standard Cable |
| Connector Protector Option | Not required in the listed configuration |
| Agency Approval Option | Not required in the listed configuration |
| Primary Function | Connects a compatible proximity probe to a Proximitor Sensor |
| Measurement Applications | Shaft vibration, relative shaft position, and compatible speed/reference measurements |
| Shipping Weight | 3 kg |
Product Features
- 12-foot cable length: Supports installations requiring the specified extension between the proximity probe and Proximitor Sensor.
- Standard cable configuration: Suits compatible systems that do not require the listed armored-cable option.
- Proximity measurement connectivity: Carries the probe signal to the associated signal-conditioning electronics.
- Rotating machinery monitoring: Supports compatible vibration and shaft-position measurement systems.
- System-level compatibility: Works as part of a correctly configured probe, extension cable, and Proximitor Sensor combination.
- Maintenance replacement component: Can be used when servicing compatible installations with a matching cable requirement.
- Multiple monitoring applications: Supports suitable proximity measurement arrangements used for machinery condition monitoring and reference measurements.
Working Principle
The 2789-144 extension cable forms the electrical connection between a compatible proximity probe and its Proximitor Sensor. Its role is to carry the probe’s electrical signal while preserving the cable characteristics required by the complete transducer system.
Proximity Probe → 2789-144 Extension Cable → Proximitor Sensor → Machinery Monitoring System
The proximity probe operates without physical contact with the monitored shaft. As the distance between the probe tip and the conductive target changes, the probe’s electrical characteristics change accordingly. The associated Proximitor Sensor converts the probe response into a usable output for the monitoring system.
The extension cable is part of the electrical measurement circuit rather than a general-purpose wire connection. Its electrical properties contribute to the response of the complete transducer system. For this reason, the probe and extension cable must be selected as compatible components, and their combined length must suit the connected sensor configuration.
During operation, shaft movement changes the probe-to-target gap. The probe responds to that change, and the resulting signal travels through the extension cable to the Proximitor Sensor. The sensor processes the signal and provides an output that can be used by compatible monitoring equipment to assess shaft vibration or relative position.
In a compressor installation, for example, the probe may monitor shaft movement near a bearing. The extension cable routes the signal to a sensor mounted in a nearby instrumentation panel. The monitoring system can then evaluate the sensor output against configured operating limits and other machinery measurements.
The cable does not independently determine whether a machine is operating normally. Interpretation depends on the connected measurement equipment, correct probe installation, calibration characteristics, and the operating conditions of the monitored machine.
An incorrect cable length or incompatible cable configuration can alter the electrical behavior of the transducer system. Consequently, replacing a cable with one that merely has a physically compatible connector is not sufficient. The complete probe, extension cable, and sensor arrangement must be suitable for the intended measurement.
Role in the Machinery Monitoring Architecture
The Bently Nevada 2789-144 occupies the signal connection between the proximity probe and the Proximitor Sensor. It supports the transmission of the probe signal within a compatible machinery protection or condition-monitoring installation.
Monitored Shaft → Proximity Probe → 2789-144 Extension Cable → Proximitor Sensor → Monitoring System
| System Component | Function |
|---|---|
| Bently Nevada 2789-144 | Connects the compatible proximity probe to the Proximitor Sensor |
| Proximity Probe | Detects changes in the distance between the probe tip and the conductive target |
| Proximitor Sensor | Processes the probe response and supplies a conditioned output |
| Machinery Monitoring System | Receives measurement signals for display, analysis, and configured alarm functions |
| Machine Shaft | Provides the moving target for proximity measurement |
| Bearing Assembly | Supports the shaft and establishes the surrounding mechanical reference |
| Instrumentation Wiring | Connects the sensor output to the monitoring equipment |
| Monitoring Controller | Processes available machinery measurements and configured operating limits |
The extension cable supports the measurement chain but does not replace the probe, sensor, or monitoring equipment. Correct operation depends on the electrical compatibility of the complete transducer assembly.
Industrial Applications
| Application | Typical Use |
|---|---|
| Centrifugal Compressors | Connecting proximity probes to sensors for shaft vibration and relative position measurements |
| Industrial Pumps | Supporting shaft-monitoring installations on compatible rotating equipment |
| Steam Turbines | Carrying proximity probe signals within machinery monitoring arrangements |
| Gas Turbines | Connecting compatible proximity probes to associated signal-conditioning electronics |
| Fluid-Film Bearing Machines | Supporting measurements of shaft movement relative to the bearing structure |
| Power Generation Equipment | Forming part of proximity transducer installations used for rotating machinery monitoring |
| Process Machinery | Maintaining probe-to-sensor signal connections in industrial monitoring systems |
| Rotating Equipment Maintenance | Replacing a damaged or unsuitable extension cable in a compatible installation |
| Shaft Position Monitoring | Carrying signals used to determine relative shaft position |
| Speed and Reference Measurements | Supporting compatible transducer configurations used for rotational reference measurements |
Installation and Maintenance
- Verify the cable reference: Confirm that the replacement is Bently Nevada 2789-144 and matches the intended standard extension cable configuration.
- Check the transducer arrangement: Identify the connected proximity probe and Proximitor Sensor and confirm that the complete system uses a compatible configuration.
- Isolate the relevant equipment: Follow the site’s maintenance and machinery safety procedures before working around rotating equipment or instrumentation wiring.
- Document the existing routing: Record the original cable route and connection points before removing the installed cable.
- Inspect the connectors: Check the probe-side and sensor-side connectors for contamination, corrosion, or mechanical damage.
- Route the cable correctly: Avoid sharp bends, crushing, abrasion, and unnecessary tension that could damage the cable or its connectors.
- Keep the signal path organized: Separate the cable from sources of electrical interference where required by the installation design.
- Connect the cable securely: Follow the applicable connection instructions and avoid applying excessive force to the connectors.
- Check the cable length configuration: Ensure that the probe and extension cable combination is suitable for the connected Proximitor Sensor.
- Inspect the completed installation: Check the connector engagement, cable support, routing, and clearance from moving or hot machine components.
- Verify the measurement signal: After the system is returned to service, check that the connected sensor and monitoring equipment produce the expected signal behavior.
- Record the replacement details: Document the cable reference, connected transducer components, installation observations, and post-maintenance test results.
If the monitoring signal remains abnormal after cable replacement, inspect the probe, connector interfaces, Proximitor Sensor, and monitoring-system configuration. A cable replacement alone will not correct faults originating in other parts of the measurement chain.
Related Components
| Component | Function |
|---|---|
| Bently Nevada 2789-144 | Standard extension cable for a compatible 3300 Series proximity measurement installation |
| Bently Nevada Proximity Probe | Detects shaft movement relative to a conductive target |
| Bently Nevada Proximitor Sensor | Processes the probe signal and provides a conditioned measurement output |
| Bently Nevada 3300 Series Monitoring Equipment | Receives and evaluates compatible machinery measurement signals |
| Probe Connector | Provides the electrical interface between the probe and extension cable |
| Sensor Connector | Connects the extension cable to the Proximitor Sensor |
| Machinery Monitoring Rack | Houses compatible monitoring modules and associated signal-processing equipment |
| Instrumentation Wiring | Carries sensor outputs to the monitoring system |
Recommended Related Models
| Model / Product Family | Product Type | Typical Application |
|---|---|---|
| Bently Nevada 2789-144 | 3300 Series Standard Extension Cable | Compatible 12-foot probe-to-sensor connection |
| Bently Nevada 3300 Series Proximity Probes | Proximity Probe Family | Non-contact shaft vibration and position measurement |
| Bently Nevada 3300 XL 8 mm Proximity Transducer System | Proximity Transducer System | Compatible rotating machinery vibration and position monitoring |
| Bently Nevada 3300 Series Proximitor Sensors | Proximity Signal-Conditioning Components | Processing compatible probe signals |
| Bently Nevada 3300 Series Monitoring Modules | Machinery Monitoring Components | Receiving and evaluating compatible transducer outputs |
Key Advantages
- Provides a 12-foot connection between a compatible proximity probe and Proximitor Sensor.
- Supports shaft vibration and relative position measurement applications.
- Forms part of a compatible Bently Nevada 3300 Series transducer system.
- Supports maintenance and replacement of standard extension cable installations.
- Can be used in suitable compressor, turbine, pump, and other rotating machinery monitoring systems.
Technical FAQs
What does the Bently Nevada 2789-144 connect?
The 2789-144 connects a compatible proximity probe to its Proximitor Sensor. It carries the probe signal as part of the transducer system used for shaft vibration, relative position, or other supported proximity measurements.
Why does extension cable length matter in a proximity transducer system?
The extension cable contributes to the electrical characteristics of the complete measurement circuit. The probe length, extension cable length, and Proximitor Sensor configuration must work together to maintain the intended system response.
Can the 2789-144 be used as a standalone vibration sensor?
No. It is a passive cable component and does not independently detect vibration or process measurement signals. A compatible proximity probe, Proximitor Sensor, and monitoring equipment are required for a functioning measurement system.
What should be checked when a proximity monitoring signal becomes unstable after cable replacement?
Check the connector engagement, cable routing, probe condition, sensor compatibility, and the configuration of the complete transducer system. Incorrect cable selection or a fault elsewhere in the measurement chain can cause abnormal readings even when the cable is physically connected.