Company Information
E-mail		[email protected]
Mobile		+8615980777398
Whatsapp		+8615980777398
WeChat		15980777398

PowerFlex 755 AC Packaged Drive – 20G11JC1K4AN0NNNNN

The 20G11JC1K4AN0NNNNN is a high-power industrial AC variable-frequency drive designed for large three-phase motor applications. It belongs to the PowerFlex 755 family and is intended for demanding applications where high output current, substantial motor power, controlled acceleration and deceleration, industrial networking, and cabinet-level installation are required.

The model is a 400 VAC, three-phase, 1,465 A, Frame 9 air-cooled packaged drive. Its rated power capability reaches 850 kW for Light Duty, 800 kW for Normal Duty, and 630 kW for Heavy Duty.

This makes it a substantially larger drive than the common machine-level VFDs used for small pumps, fans and conveyors. It is intended for major industrial equipment such as large pumps, fans, blowers, conveyors, process machinery, mining equipment, material-handling systems and other high-power rotating machinery.

---

1. Basic Product Information

---

2. Brand and Product Series

The product hierarchy can be described simply as:

Allen-Bradley → PowerFlex → PowerFlex 755 → 20G11JC1K4AN0NNNNN

The PowerFlex 755 series is designed for applications where a standard small or medium-sized inverter is not sufficient.

It provides a much broader range of motor-control functions, feedback options, communication possibilities and high-power configurations.

---

3. Product Introduction

The 20G11JC1K4AN0NNNNN is a large-frame industrial AC drive designed to regulate the speed and torque of high-power three-phase motors.

Its 1,465 A output-current rating places it firmly in the high-capacity industrial-drive category.

The drive accepts a three-phase 400 VAC supply and converts the incoming electrical power into controlled variable-frequency output power for the motor.

Instead of operating a motor continuously at one fixed speed, the drive allows motor speed and operating characteristics to be adjusted according to the actual process requirement.

This is particularly useful in large industrial systems where motor speed has a direct effect on flow, pressure, production rate, material movement or process stability.

For example, a large pump may not need to operate at maximum speed throughout the entire production cycle.

Likewise, a large fan may require different airflow during different production stages.

A conveyor may require gradual acceleration to prevent excessive mechanical shock.

The drive provides the control platform needed for these types of applications.

---

4. Main Electrical Specifications

---

5. 1,465 A Output Current

One of the defining characteristics of this model is its 1,465 A continuous output-current class.

This is a very substantial current rating.

It is intended for large industrial motors rather than small machine motors.

At this power level, motor selection should be based on the actual motor nameplate information rather than simply matching the motor horsepower or kW value.

Important information includes:

• Motor rated voltage.
• Motor full-load current.
• Motor power.
• Motor speed.
• Motor frequency.
• Motor service factor.
• Required overload.
• Starting torque.
• Continuous torque.
• Acceleration requirements.
• Deceleration requirements.
• Load inertia.
• Environmental conditions.

The motor’s rated current is particularly important when determining whether the drive is appropriately sized.

---

6. Power Ratings

The model provides three important duty classifications.

These ratings should not be treated as interchangeable.

Different machines produce different torque requirements.

A centrifugal fan normally has a different operating characteristic from a heavy conveyor.

A large pump has different requirements from a high-inertia mechanical system.

Therefore, the correct drive rating should be selected according to the actual load profile.

---

7. Light-Duty Rating – 850 kW

The Light-Duty rating is:

850 kW

This rating is suitable for applications where the load does not normally demand the higher overload capability associated with heavy-duty machinery.

Typical examples include:

• Large centrifugal fans.
• Large ventilation systems.
• Cooling fans.
• Large pumps.
• Circulation systems.
• Process blowers.
• Air-handling systems.

For applications with relatively smooth load characteristics, this rating can provide a high level of motor-control capacity.

---

8. Normal-Duty Rating – 800 kW

The Normal-Duty rating is:

800 kW

Normal-Duty operation is appropriate where the application has a more substantial load requirement than a typical light-duty fan or pump.

The motor current, acceleration profile and expected operating cycle should be checked before final selection.

---

9. Heavy-Duty Rating – 630 kW

The Heavy-Duty rating is:

630 kW

This is the appropriate rating category to consider when the application involves higher mechanical loading or more demanding overload conditions.

Typical examples may include:

• Heavy conveyors.
• Material-handling machinery.
• High-inertia equipment.
• Large process machines.
• Mining equipment.
• Mechanical processing systems.

When selecting Heavy Duty, the actual overload profile should be evaluated carefully.

---

10. Input Power

The drive is configured for:

400 VAC, three-phase input.

The 400 VAC class is commonly associated with industrial three-phase power systems.

The actual site power system should always be checked before installation.

---

11. AC Input with Precharge

The drive uses an AC input with precharge arrangement.

Precharge is particularly important in a high-power drive because the internal DC bus contains substantial energy-storage components.

At startup, the precharge circuit controls the initial charging process.

This helps prevent an uncontrolled initial charging current from being applied directly to the DC bus capacitors.

For a drive in the 1,465 A class, proper power-system design and protection are especially important.

---

12. Air-Cooled Design

The product uses:

Forced-Air Cooling

At this power level, heat management becomes an important part of the installation.

The cooling system needs sufficient airflow to remove heat generated by the power electronics.

The installation should therefore provide appropriate:

• Airflow.
• Ventilation.
• Ambient temperature.
• Cabinet clearance.
• Cooling-fan access.
• Maintenance space.
• Dust management.

If the airflow path becomes blocked, the drive may operate at elevated temperatures or generate thermal alarms and faults.

---

13. Type 12 / IP54 Enclosure

The specified enclosure is:

Type 12 / IP54

This configuration is intended for many indoor industrial environments.

The enclosure provides protection against the types of dust and incidental moisture commonly encountered in industrial electrical rooms.

However, the enclosure rating should not be interpreted as permission to install the equipment in any outdoor or highly corrosive environment.

Environmental conditions should be evaluated before installation.

---

14. MCC-Style Cabinet

The model uses an:

MCC-Style Cabinet

This is a large cabinet construction intended for high-power industrial installations.

Compared with a compact wall-mounted drive, the cabinet arrangement provides space for:

• High-current power connections.
• Power electronics.
• Cooling equipment.
• Control components.
• Communication equipment.
• Internal wiring.
• Protective components.
• Service access.

The MCC-style design is therefore well suited to centralized electrical rooms.

---

15. Cabinet Depth

The specified cabinet depth is:

800 mm

This is an important mechanical planning dimension.

The equipment should not be treated as a compact inverter.

The installation area should allow adequate room for:

• Cabinet doors.
• Power cables.
• Control cables.
• Maintenance.
• Cooling airflow.
• Inspection.
• Component replacement.
• Electrical safety clearance.

---

16. Dimensions

The model is a Frame 9 packaged drive, so its physical dimensions are substantially larger than those of compact drives.

The specified cabinet depth is:

800 mm

The exact cabinet height and width should be treated as configuration-dependent.

For procurement and installation, the final mechanical drawing should be used rather than estimating the cabinet dimensions from the catalog number alone.

---

17. Weight

Because this is a large packaged Frame 9 drive, the exact weight can vary depending on the complete cabinet configuration.

Factors that can affect the final weight include:

• Cabinet arrangement.
• Internal power components.
• Installed options.
• Operator interface configuration.
• Power connections.
• Packaging configuration.
• Shipping configuration.

Therefore, the most appropriate engineering value is:

Weight: Configuration-dependent

A precise weight should be obtained from the final equipment mechanical/shipping documentation before transportation or lifting.

---

18. Filtering

This configuration includes an:

EMC Filter

Filtering is useful in industrial installations where electromagnetic compatibility and electrical noise need to be considered.

This is especially relevant when the drive is installed near:

• PLC equipment.
• Sensors.
• Measurement instruments.
• Communication equipment.
• Industrial computers.
• Other drives.
• Process-control equipment.

The filter is only one part of the overall EMC design.

Proper grounding, cable selection and cable routing are also important.

---

19. CM Jumper Removed

This configuration specifies:

CM Jumper Removed

The common-mode configuration should be considered together with the site’s grounding arrangement and motor-cable installation.

Relevant factors include:

• Grounding system.
• Motor cable length.
• Motor insulation.
• Cable shielding.
• Electrical noise.
• Common-mode current.
• Installation topology.

This is particularly important for large drives because the electrical energy involved is considerably higher than that of small motor drives.

---

20. Dynamic Braking

The configuration specifies:

Dynamic Braking: None

This means the catalog configuration does not include the specified dynamic-braking arrangement.

This is important when the driven machine has significant stored rotational energy.

Applications that may require closer braking analysis include:

• Large fans.
• High-inertia conveyors.
• Centrifuges.
• Large rotating machinery.
• Heavy material-handling equipment.
• Machinery requiring very short stopping times.

The required deceleration method should therefore be evaluated during system design.

---

21. No Local HIM Configuration

This model configuration is specified with:

Blank / No HIM

This means a door-mounted Human Interface Module is not included in the specified configuration.

The drive can still be integrated into a control system and commissioned through the appropriate control and communication architecture.

For applications requiring frequent local operator interaction, the project designer may want to consider an appropriate operator-interface configuration.

---

22. Embedded EtherNet/IP

The product configuration includes:

Embedded EtherNet/IP

This provides an industrial communication path for integrating the drive with a larger automation system.

Typical information that can be exchanged includes:

• Start command.
• Stop command.
• Speed reference.
• Frequency feedback.
• Current feedback.
• Drive status.
• Fault information.
• Warning information.
• Operating parameters.
• Diagnostic information.

This can reduce the need for extensive hardwired control signals.

---

23. Product Applications

Large Pumping Systems

The drive is particularly suitable for large pumping applications.

Examples include:

• Water-transfer pumps.
• Cooling-water pumps.
• Process-water pumps.
• Industrial circulation pumps.
• Wastewater pumps.
• Mining pumps.
• Utility pumps.

Variable-speed operation can allow the pump to respond to actual flow and pressure requirements.

---

24. Large Fan Systems

Large industrial fans are another important application.

Potential applications include:

• Furnace ventilation.
• Exhaust systems.
• Mine ventilation.
• Dust collection.
• Process ventilation.
• Cooling systems.
• Industrial air handling.

Fan speed can be adjusted according to airflow requirements.

This can be more flexible than operating the motor continuously at a fixed speed.

---

25. Large Blowers

The drive can also be used with large blowers.

Typical applications include:

• Wastewater aeration.
• Process air.
• Combustion air.
• Industrial gas circulation.
• Pneumatic conveying.
• Large ventilation systems.

---

26. Conveyor Systems

Large conveyor systems can benefit from controlled acceleration.

A conveyor carrying heavy material may experience substantial mechanical stress if full torque is applied abruptly.

Variable-frequency control can provide a controlled acceleration profile.

This can help reduce stress on:

• Conveyor belts.
• Gearboxes.
• Couplings.
• Shafts.
• Bearings.
• Mechanical supports.

---

27. Mining Applications

The high-current capacity makes this drive appropriate for many large mining applications.

Potential applications include:

• Ore conveyors.
• Mine ventilation.
• Large dewatering pumps.
• Material-handling systems.
• Processing equipment.
• Crushers and associated machinery.
• Auxiliary rotating equipment.

Mining applications often involve long operating periods and substantial mechanical loads.

Drive reliability, cooling and maintenance therefore become important considerations.

---

28. Cement and Heavy Processing

Potential applications include:

• Large process fans.
• Material conveyors.
• Dust-extraction systems.
• Large pumps.
• Blowers.
• Material-handling equipment.
• Process machinery.

The drive can provide controlled speed operation for large motors used throughout a processing plant.

---

29. Water and Wastewater

The drive can also be used in large water-management systems.

Potential applications include:

• Intake pumps.
• Water-transfer pumps.
• Distribution pumps.
• Wastewater pumps.
• Aeration blowers.
• Process-water systems.

Variable-speed operation can be useful when demand changes throughout the production cycle.

---

30. Main Product Advantages

---

31. Advantage: High Motor Capacity

The 1,465 A current rating is the most obvious advantage of this particular configuration.

It allows the drive to serve applications that would be far beyond the capacity of compact variable-frequency drives.

This makes the product suitable for large industrial motors used in infrastructure, processing and heavy manufacturing.

---

32. Advantage: Multiple Duty Ratings

Having separate Light-Duty, Normal-Duty and Heavy-Duty ratings makes the drive more flexible.

The engineer can select the appropriate rating according to the machine’s actual operating characteristics.

This is preferable to selecting a drive solely according to a motor’s nominal kW.

---

33. Advantage: Controlled Acceleration

Large motors can generate substantial mechanical shock if they are started abruptly.

Variable-frequency control provides a controlled acceleration profile.

This can reduce stress on mechanical components and make machine operation smoother.

---

34. Advantage: Variable-Speed Process Control

The drive can adjust motor speed according to process demand.

This is especially useful for:

• Pumps.
• Fans.
• Blowers.
• Conveyors.
• Processing machinery.

Variable-speed control can improve process flexibility and may also reduce energy consumption in suitable variable-torque applications.

---

35. Advantage: Industrial Network Integration

Embedded EtherNet/IP allows the drive to communicate with a plant control system.

This makes it easier to coordinate the motor with:

• PLC systems.
• Operator stations.
• Supervisory systems.
• Other drives.
• Process-control equipment.

---

36. Advantage: Large Cabinet Design

The MCC-style cabinet provides a practical solution for very high-power applications.

It offers a more structured installation arrangement than attempting to mount a very large power section directly on a machine.

This is particularly useful for centralized electrical rooms.

---

37. Advantage: EMC Filtering

The integrated filtering arrangement is useful in installations where electromagnetic compatibility needs to be considered.

This can help when large drives are installed close to sensitive electrical equipment.

However, correct grounding and installation practices remain essential.

---

38. Detailed Application Table

---

39. Five Same-Series or Closely Related Models

The following models are suitable comparison candidates within the same PowerFlex 755 high-power family.

The precise suffix configuration should always be checked because different catalog-number characters can represent differences in filtering, cabinet options, braking, interface configuration and other features.

---

40. Same-Series Model Comparison

---

41. Five Popular Models Across the Same Brand

For applications that do not require a 1,465 A drive, smaller models from the same brand can be more practical.

---

42. PowerFlex 525 – 25B-D6P0N104

The 25B-D6P0N104 is intended for a completely different motor-size range.

It is a compact industrial drive that is more appropriate for smaller machinery.

Typical applications include:

• Small conveyors.
• Pumps.
• Fans.
• Machine tools.
• Small production machinery.

---

43. PowerFlex 525 – 25B-D017N104

The 25B-D017N104 provides a higher current level within the compact-drive category.

It is useful where a large cabinet-mounted PowerFlex 755 would be unnecessarily large.

---

44. PowerFlex 525 – 25B-D024N114

The 25B-D024N114 is another compact-drive option for medium-sized machine applications.

---

45. PowerFlex 753 – 20F11ND034AA0NNNNN

The 20F11ND034AA0NNNNN is a more industrially oriented drive than the compact PowerFlex 525.

It is suitable for medium and larger machinery where additional control flexibility is required.

Typical applications include:

• Pumps.
• Fans.
• Conveyors.
• Process machinery.
• Material-handling systems.

---

46. Why Choose the 20G11JC1K4AN0NNNNN Instead of a Smaller Drive?

The answer is primarily motor size and application scale.

---

47. Installation Considerations

A drive of this size requires considerably more installation planning than a small VFD.

The electrical room should provide sufficient space for the complete cabinet.

Important considerations include:

• Floor strength.
• Cabinet access.
• Cable entry.
• Power cable bending radius.
• Motor cable routing.
• Grounding.
• Cooling airflow.
• Service clearance.
• Door movement.
• Maintenance access.
• Transportation route.
• Lifting equipment.

---

48. Mechanical Installation

Because the drive is a large cabinet assembly, transportation and installation should be planned before the equipment reaches the site.

---

49. Maintenance Recommendations

Large industrial drives benefit from preventive maintenance.

Cooling System

Check cooling fans and airflow paths.

Dust accumulation should be controlled because restricted airflow can increase internal temperatures.

Electrical Connections

Inspect high-current connections for signs of overheating, looseness or discoloration.

Motor Cables

Check motor cable insulation, grounding and termination.

Cabinet

Keep the cabinet clean and maintain appropriate ventilation.

Communication

Check network connections and communication status.

Fault History

Repeated drive faults should be investigated rather than repeatedly reset.

---

50. Selection Checklist

Before selecting this model for a project, the following information should be available.

---

51. Overall Technical Summary

---

52. Final Product Assessment

The 20G11JC1K4AN0NNNNN is best understood as a very high-power industrial variable-frequency drive rather than a general-purpose compact inverter.

Its 1,465 A output capacity and 850 kW Light-Duty rating make it appropriate for large motor systems where a conventional small-frame VFD would not have sufficient current capacity.

The PowerFlex 755 platform also makes the drive suitable for applications that require integration with a larger automation system, particularly where industrial Ethernet communication, diagnostics, variable-speed control and centralized drive management are important.

The 400 VAC three-phase input, Frame 9 construction, forced-air cooling, Type 12/IP54 enclosure, 800 mm cabinet depth, MCC-style cabinet, EMC filtering and embedded EtherNet/IP form a configuration intended for substantial industrial installations.

Its strongest application areas include large pumps, industrial fans, blowers, conveyors, mining equipment, water-treatment systems, cement-processing equipment, material-handling systems and other large rotating machines.

The main selection issue is the distinction between the three duty ratings. The drive is rated at 850 kW Light Duty, 800 kW Normal Duty and 630 kW Heavy Duty, so the correct rating depends on the actual load characteristics rather than simply the motor’s nominal power.

For mechanical planning, the known cabinet depth is 800 mm. Because this is a large Frame 9 packaged configuration, the final overall dimensions and weight in kg can vary according to the complete cabinet arrangement. For lifting, transportation and floor-loading calculations, the actual equipment documentation should be used rather than an estimated value.

The closely related PowerFlex 755 models listed above provide useful alternatives when a project requires a different current or power level. Smaller PowerFlex models are more appropriate when the motor is significantly smaller, while the larger Frame 10 configurations become more suitable as motor current and power requirements increase.

Overall, the 20G11JC1K4AN0NNNNN is a strong choice for high-capacity industrial motor control where large electrical capacity, cabinet-level construction, variable-speed operation and plant automation integration are required.