ProductPRODUCT
Featured products
Contact Us
- Ingersoll Rand
- 47588446001 42837054
- Loctite Sealant
- USA
- 80 × 20 × 50 mm
- 0.1 kg
- Xiamen, China
- New & In Stock
- T/T, PayPal, Western Union
- 1 Year
- 1-3 Working Days
- DHL, UPS, TNT, FedEx and EMS.
- 24-Hour Service
- COO
- 8
Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |
Product Overview
The Ingersoll Rand 47588446001 42837054 Loctite Sealant is identified by the supplied product title as an industrial sealing product associated with Ingersoll Rand equipment maintenance. The 42837054 reference is also associated with LOCTITE 609 retaining compound, a product used to secure suitable cylindrical mating components. These product descriptions are not interchangeable, so the exact material identity should be confirmed before assigning application-specific performance characteristics.
In compressor maintenance, sealing and retaining compounds serve different purposes. A sealant helps prevent leakage through a joint or connection, while a retaining compound secures compatible fitted components against movement between mating surfaces. Selecting the correct material depends on the joint design, the surfaces being assembled, the operating environment, and the service procedure.
For maintenance personnel, the key consideration is to identify the intended application before using the product. A material specified for retaining a fitted component should not automatically be substituted for a pipe-thread sealant, flange sealant, or gasket compound. Incorrect selection can affect assembly integrity and complicate subsequent maintenance.
The product should therefore be identified by its complete part number and confirmed material designation before application. The technical information below focuses on general industrial assembly considerations without assigning unverified chemical properties, curing times, temperature limits, or compressor-specific compatibility to this part number.
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | Ingersoll Rand |
| Part Number | 47588446001 |
| Product Name | Loctite Sealant |
| Associated Part Number | 42837054 |
| Dimensions | 80 × 20 × 50 mm |
| Weight | 0.1 kg |
Product Features
- Industrial maintenance use: Associated with maintenance materials used in mechanical assembly and equipment servicing.
- Application-specific selection: Requires confirmation of the material type and intended joint or component.
- Assembly integrity: Correct material selection helps achieve the specified sealing or component-retention function.
- Procedure-dependent application: Surface preparation and application methods must match the identified product grade.
- Maintenance traceability: The supplied part numbers help distinguish the required material during parts identification and service planning.
Working Principle
The working principle depends on whether the supplied material is a sealant or a retaining compound.
A conventional industrial sealant fills or seals a designated joint interface to restrict the passage of air, liquid, or other process media. Its performance depends on the chemistry, joint geometry, surface condition, and compatibility with the operating fluid.
A retaining compound such as LOCTITE 609 works differently. It is intended for suitable cylindrical mating components, where the compound occupies the clearance between fitted surfaces and helps secure the assembled parts. Its suitability depends on the component materials, fit, clearance, and prescribed assembly procedure.
These functions should not be treated as equivalent. A compound intended for cylindrical component retention should not be assumed suitable for sealing a threaded connection or a compressor housing joint.
Before use, confirm the exact product designation associated with part number 42837054. Follow the applicable technical instructions for surface preparation, application quantity, assembly sequence, and curing requirements. Do not infer these parameters from the generic word “sealant” in a product title.
Role in Industrial Equipment Maintenance
Assembly compounds are used at specific interfaces where sealing or retention is required. The correct product depends on the function of the joint rather than simply the equipment in which it is installed.
| Assembly Area | Function to Verify |
|---|---|
| Cylindrical Fitted Components | Retention of compatible mating parts where a retaining compound is specified |
| Threaded Connections | Sealing of compatible threads where an approved thread sealant is required |
| Flanged Joints | Sealing of the designated interface with a compatible joint compound |
| Mechanical Housings | Sealing or retention according to the assembly design |
| Compressor Assemblies | Use only at locations specified by the applicable service procedure |
| Maintenance Operations | Correct material identification, surface preparation, and application |
Industrial Applications
| Application | Typical Use |
|---|---|
| Compressor Maintenance | Applying the specified assembly compound during authorized repair procedures |
| Mechanical Assembly | Securing or sealing components when the material is approved for the joint |
| Rotating Equipment Service | Using an appropriate compound for compatible fitted components |
| Industrial Machinery Repair | Restoring designated joints during maintenance |
| Component Reassembly | Following the specified material and preparation requirements |
| Preventive Maintenance | Preparing the correct assembly material before scheduled work |
| Corrective Maintenance | Replacing or restoring a joint after identifying the cause of leakage or component movement |
Installation and Maintenance
- Verify the product identity: Confirm the exact material designation associated with part number 42837054 before opening or applying the product.
- Identify the intended joint: Determine whether the application requires a sealant, thread sealant, gasket compound, or retaining compound.
- Review the assembly procedure: Check the specified material, application location, and preparation requirements for the component being serviced.
- Isolate the equipment: Shut down and isolate the equipment according to the applicable maintenance procedure before dismantling the assembly.
- Prepare the mating surfaces: Clean the surfaces using a method compatible with the confirmed product and the materials being joined.
- Inspect the components: Check for damage, wear, corrosion, or excessive clearance that could prevent the assembly from meeting its requirements.
- Confirm material compatibility: Verify suitability for the component materials and the operating media before application.
- Apply the specified quantity: Follow the instructions for the confirmed product grade rather than estimating the required amount.
- Assemble the components: Follow the prescribed assembly sequence, fit requirements, and tightening specifications.
- Observe the required setting or curing conditions: Use the product-specific instructions to determine when the assembly may be handled or returned to service.
- Inspect the completed joint: Check the assembled components for correct positioning and any visible defects relevant to the application.
- Record the maintenance work: Document the product identification, application location, and completed inspection or functional checks.
Compatible System Components
| Component | Compatibility Consideration |
|---|---|
| Metal Mating Components | Confirm that the identified material is suitable for the substrate and joint geometry |
| Cylindrical Fitted Parts | Use a retaining compound only where the fit and application permit it |
| Threaded Fittings | Select a thread sealant specifically approved for the connection and service media |
| Flanged Connections | Use the specified flange-sealing material where required |
| Mechanical Housings | Follow the original assembly specification for sealing and retention |
| Compressor Components | Confirm the exact application in the relevant equipment service procedure |
Recommended Related Models
Related compounds should be selected by their verified material type and intended function rather than by brand name alone.
| Product | Product Type | Selection Consideration |
|---|---|---|
| LOCTITE 609 | Retaining Compound | For suitable cylindrical mating components when specified by the assembly procedure |
| Other LOCTITE Retaining Compounds | Retaining Compounds | Select according to the required fit, substrate, and application |
| LOCTITE Thread Sealants | Thread Sealants | For compatible threaded joints where thread sealing is required |
| LOCTITE Flange Sealants | Flange Sealants | For specified flange interfaces where the product is approved |
Key Advantages
- Supports the use of application-specific assembly materials.
- Helps distinguish sealing requirements from component-retention requirements.
- Encourages correct material selection before maintenance.
- Supports consistent assembly procedures and maintenance records.
Technical FAQs
Is part number 42837054 a sealant or a retaining compound?
The supplied title identifies it as a Loctite sealant, while the 42837054 reference is also associated with LOCTITE 609 retaining compound. These descriptions indicate a product-identification discrepancy that should be resolved before assigning a specific application.
Can a retaining compound be substituted for a thread sealant?
No substitution should be assumed. Retaining compounds and thread sealants serve different purposes and have different application requirements. The material must match the joint type and the equipment’s specified assembly procedure.
What should be checked before applying the compound to compressor components?
Confirm the exact product grade, component materials, joint geometry, operating media, and application instructions. Also check whether the compound is specified for that particular assembly rather than relying on a general compressor-maintenance description.
Can the product’s curing time and temperature limits be determined from the part number alone?
No. Those properties depend on the exact material designation and its technical specifications. They should not be inferred from the Ingersoll Rand part number or the generic product name.