ProductPRODUCT
Featured products
Contact Us
- GE
- IC697VAL314
- Analog Output Module
- USA
- 200 × 40 × 150 mm
- 1.36 kg
- Xiamen, China
- New & In Stock
- T/T, PayPal, Western Union
- 1 Year
- 1-3 Working Days
- DHL, UPS, TNT, FedEx and EMS.
- 24-Hour Service
- COO
- 5
Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |
Product Overview
The GE IC697VAL314 Analog Output Module is an industrial analog output module developed for the GE Fanuc Series 90-70 PLC platform. It serves as the interface between the PLC controller and field devices requiring continuously variable analog control signals, enabling precise regulation of industrial processes and equipment.
Unlike digital output modules that provide simple ON/OFF switching, the IC697VAL314 converts digital control data generated by the PLC into proportional analog output signals. These signals are used to control compatible industrial devices such as proportional control valves, valve positioners, variable frequency drives (VFDs), process controllers, dosing systems, servo controllers, and other equipment requiring continuously adjustable inputs.
Installed directly into the Series 90-70 PLC rack, the module communicates with the CPU through the high-speed backplane. The PLC application continuously calculates the required output value based on process measurements, operator commands, production recipes, or PID control algorithms. The IC697VAL314 then delivers the corresponding analog signal to the connected field device.
The module is widely used in manufacturing automation, chemical processing, oil and gas, power generation, water treatment, HVAC, pharmaceutical production, food and beverage processing, mining, and other industrial automation systems requiring stable and accurate analog process control.
With dimensions of 200 × 40 × 150 mm and an approximate weight of 1.36 kg, the IC697VAL314 is designed for compact rack-mounted installation inside industrial control cabinets while providing dependable long-term performance.
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | GE Fanuc |
| Model | IC697VAL314 |
| Product Family | Series 90-70 |
| Product Type | Analog Output Module |
| Primary Function | Analog Signal Output |
| Installation Method | Rack Mounted |
| PLC Platform | GE Fanuc Series 90-70 |
| Communication | High-Speed PLC Backplane |
| Application | Industrial Process Control |
| Mounting Location | Series 90-70 PLC Rack |
| Dimensions | 200 × 40 × 150 mm |
| Weight | Approximately 1.36 kg |
| Installation Environment | Industrial Control Cabinet |
Engineering Note: Output channel quantity, supported signal types, electrical ratings, isolation characteristics, resolution, accuracy, load capacity, and wiring specifications should always be verified using the applicable IC697VAL314 hardware documentation before installation or replacement.
Function and Working Principle
The GE IC697VAL314 converts digital control values from the PLC into continuously variable analog output signals that regulate compatible industrial equipment.
Typical control architecture:
Industrial Process
↓
Field Sensors
↓
Analog Input Module
↓
Series 90-70 PLC CPU
↓
PLC Control Logic
↓
GE IC697VAL314 Analog Output Module
↓
Analog Output Signal
↓
Valve / Drive / Actuator
↓
Industrial Equipment
The PLC evaluates process feedback, compares actual values with programmed setpoints, and calculates the appropriate output signal. The IC697VAL314 generates the required analog output, enabling smooth and proportional equipment control.
Primary functions include:
- Continuous analog signal generation
- Closed-loop process control
- Proportional valve control
- Variable speed reference output
- Process regulation
- Equipment automation
- PLC-based output control
- Stable analog transmission
- Industrial process optimization
- Automatic system adjustment
Role in Industrial Control Systems
Within a GE Fanuc Series 90-70 PLC system, the IC697VAL314 serves as the final analog control interface between the PLC CPU and field equipment.
Typical automation architecture:
Industrial Sensors
↓
Analog Input Modules
↓
Series 90-70 CPU
↓
PLC Control Program
↓
IC697VAL314 Analog Output Module
↓
Control Valves / VFDs / Actuators
↓
Industrial Process
The module enables the PLC to convert software-generated control calculations into real-world electrical output signals, ensuring accurate regulation of industrial processes.
Industrial Applications
Manufacturing Automation
Typical applications include:
- Conveyor speed regulation
- Packaging machinery
- Assembly lines
- Robotic production systems
- Automated manufacturing equipment
Water and Wastewater Treatment
Common applications include:
- Pump control
- Chemical dosing
- Flow regulation
- Valve positioning
- Water distribution systems
Chemical Processing
Suitable for controlling:
- Flow control valves
- Pressure regulation
- Reactor systems
- Mixing equipment
- Chemical dosing systems
Oil and Gas Industry
Widely used for:
- Pipeline valve control
- Compressor regulation
- Pump automation
- Process control systems
- Production equipment
Power Generation
Frequently applied to:
- Cooling water control
- Boiler auxiliary systems
- Turbine support equipment
- Process valve automation
- Utility process regulation
HVAC Systems
Ideal for:
- Fan speed control
- Damper positioning
- Chiller control
- Heating regulation
- Building automation
Food and Beverage Processing
Typical applications include:
- Filling equipment
- Mixing systems
- Temperature regulation
- Process flow control
- Packaging automation
Installation and System Integration
Proper installation is essential for accurate analog signal output and reliable long-term operation.
Before installation, engineers should verify:
- Series 90-70 rack compatibility
- Module slot assignment
- PLC hardware configuration
- Output signal requirements
- Field device compatibility
- Wiring integrity
- Grounding
- Cable shielding
- Environmental conditions
- Cabinet ventilation
- Power supply capacity
Recommended Installation Procedure
- Shut down the PLC system.
- Disconnect electrical power.
- Verify rack configuration.
- Inspect the rack connector.
- Install the IC697VAL314 module.
- Secure the module in position.
- Connect analog output wiring.
- Verify terminal assignments.
- Confirm wiring continuity.
- Check shielding and grounding.
- Restore system power.
- Verify PLC module recognition.
- Configure output addresses.
- Test output channels.
- Verify field equipment response.
- Confirm automatic process control.
- Complete commissioning.
Analog Output Signal Integrity
Stable analog output depends on proper electrical installation.
Recommended practices include:
Proper Cable Routing
Keep analog cables separated from high-voltage and high-current wiring.
Shielded Instrumentation Cable
Use shielded signal cable where appropriate to reduce electromagnetic interference.
Effective Grounding
Ground the control system according to industrial electrical standards.
Output Verification
Measure output values during commissioning to confirm correct operation.
Secure Terminal Connections
Inspect terminals periodically for looseness or corrosion.
Compatible Field Equipment
Verify that connected devices are compatible with the module’s output characteristics.
PLC Programming and Process Control
The Series 90-70 PLC continuously updates analog output values according to process requirements.
Typical programming functions include:
- Output scaling
- Engineering unit conversion
- PID control
- Automatic regulation
- Manual control
- Alarm management
- Sequence control
- Setpoint calculation
- Equipment interlocking
- Process optimization
Typical control sequence:
Process Variable
↓
Analog Input
↓
PLC Processing
↓
Control Algorithm
↓
IC697VAL314
↓
Analog Output
↓
Industrial Equipment
↓
Process Adjustment
Maintenance and Troubleshooting
Routine maintenance helps ensure long-term reliability.
Common Symptoms
Possible issues include:
- No analog output
- Incorrect output value
- Unstable signal
- Field equipment not responding
- Communication faults
- PLC diagnostics
- Wiring faults
- Intermittent output
Recommended Troubleshooting Procedure
1. Verify PLC Operation
Confirm the CPU is functioning correctly.
2. Check Module Recognition
Verify the PLC detects the IC697VAL314.
3. Inspect Output Wiring
Check cable continuity, shielding, polarity, and grounding.
4. Verify Output Configuration
Confirm correct addressing and scaling parameters.
5. Test Field Equipment
Verify connected valves, drives, or actuators operate correctly.
6. Measure Output Signal
Use suitable test equipment to confirm analog output values.
7. Review PLC Diagnostics
Check for module or system fault information.
8. Inspect Rack Connections
Ensure the module is fully seated.
9. Replace the Module if Necessary
Replace the module only after confirming an internal hardware fault.
Compatible System Components
| Component | Function |
|---|---|
| GE Series 90-70 CPU | PLC processing |
| IC697VAL314 | Analog output control |
| Series 90-70 Rack | Module installation |
| Series 90-70 Power Supply | PLC system power |
| Analog Input Modules | Process feedback |
| Digital Input Modules | Signal acquisition |
| Digital Output Modules | Discrete equipment control |
| Variable Frequency Drives | Motor speed regulation |
| Control Valves | Flow and pressure control |
| Valve Positioners | Proportional positioning |
| HMI | Operator interface |
| SCADA System | Supervisory control |
| Industrial Sensors | Process monitoring |
Recommended Alternative Models
| Model | Product Type | Typical Application |
|---|---|---|
| IC697VAL314 | Analog Output Module | High-precision analog control |
| IC697VAL308 | Analog Output Module | Industrial process regulation |
| IC697VAL304 | Analog Output Module | General analog control |
| Series 90-70 Analog Input Modules | Analog Input Module | Process measurement |
| Series 90-70 Digital Output Modules | Digital Output Module | ON/OFF equipment control |
| Series 90-70 Communication Modules | Communication Module | PLC networking |
| Series 90-70 CPU Modules | CPU Module | Central automation control |
When selecting a replacement module, engineers should verify electrical specifications, output signal characteristics, channel configuration, wiring requirements, PLC hardware configuration, and compatibility with connected field equipment.
Key Advantages
- Designed for GE Fanuc Series 90-70 PLC systems
- Reliable analog signal output
- Supports proportional industrial process control
- Suitable for closed-loop automation
- High-speed PLC backplane communication
- Stable analog signal transmission
- Supports compatible valves, drives, and actuators
- Easy rack-mounted installation
- Compact industrial construction
- Suitable for continuous industrial operation
- Dimensions 200 × 40 × 150 mm
- Approximate weight 1.36 kg
Technical FAQs
What is the GE IC697VAL314?
The GE IC697VAL314 is an Analog Output Module for the GE Fanuc Series 90-70 PLC platform that converts PLC control data into analog output signals.
What is its primary function?
Its primary function is to provide continuously variable analog output signals for controlling compatible industrial equipment.
What types of equipment can it control?
It can provide analog reference signals for compatible variable frequency drives, proportional control valves, valve positioners, dosing systems, actuators, and similar analog-controlled devices.
What are the module dimensions?
The module measures 200 × 40 × 150 mm.
What is the approximate weight?
The approximate weight is 1.36 kg.
Which PLC platform supports this module?
The IC697VAL314 is designed for the GE Fanuc Series 90-70 PLC platform.
Can it be used in closed-loop control systems?
Yes. Combined with analog input modules and PLC control algorithms, it supports closed-loop regulation of industrial processes.
How can output problems be diagnosed?
Check PLC operation, module recognition, output configuration, wiring, grounding, field-device operation, measured output values, rack connections, and available diagnostic information.
What should be verified before replacing the module?
Engineers should verify electrical ratings, signal characteristics, channel configuration, wiring, PLC addressing, rack compatibility, and field-device requirements before installing a replacement module.
Conclusion
The GE IC697VAL314 Analog Output Module provides dependable analog signal generation for GE Fanuc Series 90-70 PLC systems. It converts PLC-generated control values into continuously variable electrical outputs, enabling accurate regulation of industrial equipment such as control valves, variable frequency drives, actuators, and process control devices.
With dimensions of 200 × 40 × 150 mm and an approximate weight of 1.36 kg, the IC697VAL314 is suitable for compact rack-mounted installation in industrial control cabinets. When integrated with compatible Series 90-70 CPUs, analog input modules, power supplies, HMIs, SCADA systems, and field devices, the GE IC697VAL314 delivers reliable analog process control, improved production efficiency, stable equipment regulation, and long-term automation performance across a wide range of industrial applications.