• Epro PR6424/118-000 16 mm Eddy Current Sensor
  • Epro PR6424/118-000 16 mm Eddy Current Sensor
  • Epro PR6424/118-000 16 mm Eddy Current Sensor
  • Epro PR6424/118-000 16 mm Eddy Current Sensor
  Product Overview The Epro PR6424/118-000 16 mm Eddy Current Sensor is a non-contact displacement measurement probe designed for monitoring the condition and operating behavior of rotating machine……
Epro PR6424/118-000 16 mm Eddy Current Sensor
  • Epro
  • PR6424/118-000
  • 16 mm Eddy Current Sensor
  • Germany
  • 16 mm
  • 0.2 kg
  • Xiamen, China
  • New & In Stock
  • T/T, PayPal, Western Union
  • 1 Year
  • 1-3 Working Days
  • DHL, UPS, TNT, FedEx and EMS.
  • 24-Hour Service
  • COO
  • 13

Our advantage

Epro PR6424/118-000 16 mm Eddy Current Sensor

Global Logistics

We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.

Epro PR6424/118-000 16 mm Eddy Current Sensor

Brand new and original

Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.

Epro PR6424/118-000 16 mm Eddy Current Sensor

24-hour service

We provide 7*24 hours service to our customers. We will be there whenever you need us.

Epro PR6424/118-000 16 mm Eddy Current Sensor

Price advantage

All our products are priced very favorably because we have our own warehouse and supply.


Company Information
E-mail [email protected]
Mobile +8615980777398
Whatsapp +8615980777398
WeChat 15980777398

 

Product Overview

The Epro PR6424/118-000 16 mm Eddy Current Sensor is a non-contact displacement measurement probe designed for monitoring the condition and operating behavior of rotating machinery. It belongs to the PR6424 sensor family developed for critical industrial equipment, including steam turbines, gas turbines, compressors, pumps, and fans.

Manufactured under the EPRO product line associated with Emerson, the PR6424 series uses electromagnetic eddy current technology to measure the distance between the probe tip and a conductive target. In rotating machinery, the target is commonly a ferromagnetic steel shaft. As the distance between the sensor and the shaft changes, the electrical characteristics of the probe change accordingly. A compatible signal converter processes this response and produces an output representing shaft displacement.

Unlike contact-based measurement devices, the PR6424 probe does not need to touch the rotating shaft. This is particularly important in machinery operating at high speed, where physical contact would cause rapid wear and could interfere with machine operation.

The PR6424 series is designed to measure several important mechanical conditions, including radial shaft displacement, axial position, shaft vibration, eccentricity, and rotational speed or keyphasor-related signals when used in an appropriate measurement arrangement.

The PR6424/118-000 has a specified sensor head diameter of 16 mm and a supplied weight of approximately 0.2 kg. Its compact sensing head and threaded mounting arrangement allow it to be installed near a suitable measurement target while maintaining the required clearance.

For reliable operation, the probe should be treated as part of a complete measurement chain. The sensor, extension cable, signal converter, and machinery monitoring equipment must be compatible with one another. The exact cable and connector configuration should be checked against the product label and ordering documentation for the /118-000 variant.

Technical Specifications

Parameter Specification
Brand Epro / EPRO
Manufacturer Emerson
Model PR6424/118-000
Product Series PR6424
Product Type 16 mm Eddy Current Sensor
Measurement Principle Non-contact eddy current
Sensor Head Diameter 16 mm
Typical Series Sensitivity 4 V/mm
Sensitivity Linearity ≤ ±1.5%
Static Measurement Range ±2.0 mm
Dynamic Measurement Range 0–1,000 μm
Nominal Center Air Gap Approximately 2.7 mm
Long-Term Drift Less than 0.3%
Reference Target Material Ferromagnetic steel
Standard Reference Steel 42CrMo4
Reference Minimum Shaft Diameter 80 mm or greater
Probe Sleeve Material Stainless steel
Cable Insulation Material PTFE
Series Operating Temperature Refer to the exact variant specification
Sensor Head Pressure Resistance 10,000 hPa reference value
Shock and Vibration Reference 5 g at 60 Hz and 25°C
Sensor Head Diameter 16 mm
Weight Provided 0.2 kg
Typical Applications Turbines, compressors, pumps, fans, and rotating machinery

Note: Electrical performance figures are PR6424 series reference specifications. Confirm the exact PR6424/118-000 cable length, connector, mounting details, and environmental limits against its product documentation before installation.

Function and Working Principle

The PR6424/118-000 operates using the eddy current measurement principle. It produces a high-frequency electromagnetic field at the sensing tip. When a conductive target enters this field, electrical currents known as eddy currents are induced in the target material.

These currents affect the impedance of the sensor coil. The resulting electrical change depends on the distance between the probe tip and the target surface.

A compatible signal converter interprets this change and converts it into an electrical output that can be used by a machinery monitoring or protection system.

1. Non-Contact Displacement Measurement

The sensor measures the gap between its sensing tip and a conductive target without making physical contact.

In a rotating machine, the probe is mounted close to the shaft. As the shaft moves relative to the probe, the distance changes. The sensor detects this movement and provides a signal corresponding to the displacement.

This arrangement is suitable for machinery where continuous measurement is required but physical contact with the rotating component is not practical.

2. Radial Shaft Vibration Monitoring

Radial shaft vibration refers to movement of the shaft perpendicular to its rotational axis.

A PR6424 probe installed near the shaft can detect changes in the radial gap as the shaft rotates. The resulting signal can be processed to evaluate shaft vibration and identify changes in machine behavior.

When two probes are installed in suitable orientations, the monitoring system can evaluate shaft movement in different radial directions.

3. Axial Position Measurement

Axial displacement describes movement along the shaft’s rotational axis.

A probe positioned toward an appropriate shaft target or thrust collar can measure changes in axial clearance. This information can help operators and maintenance engineers monitor thrust-bearing behavior and detect abnormal shaft movement.

The mounting arrangement and target geometry must be designed for the intended axial measurement.

4. Eccentricity and Shaft Position

Eccentricity describes the difference between the geometric center of a shaft and its rotational center. Excessive eccentricity may result from shaft deformation, installation problems, or mechanical wear.

The PR6424 series can be used to measure static shaft position and dynamic movement. These measurements can help identify changes in alignment or shaft condition when interpreted alongside other machinery data.

5. Speed and Keyphasor-Related Measurement

With an appropriate target arrangement and monitoring-system configuration, an eddy current probe can also provide rotational reference information.

A suitable shaft feature or keyway passing the probe produces a detectable change in the sensor signal. This information can be used as a reference for rotational speed and phase-related measurements.

The exact function depends on the target geometry, probe position, signal converter, and monitoring equipment.

Role in Industrial Machinery Monitoring Systems

The PR6424/118-000 is a sensing component rather than a standalone machinery protection system. Its measurement signal must be processed by compatible electronic equipment before it can be used for monitoring, alarms, or machine shutdown decisions.

Signal Converter Integration

A compatible signal converter provides the electrical interface between the probe and the monitoring system. It supplies the required excitation and converts the probe response into a usable output signal.

The converter must match the sensor family and electrical configuration. The extension cable, connector type, and total cable arrangement also affect compatibility.

Machinery Protection Systems

The conditioned signal can be supplied to a machinery monitoring system for continuous evaluation. Depending on the installed monitoring architecture, the system may display shaft vibration, position, or other configured measurement values.

Alarm and trip thresholds are established according to the machine design, operating requirements, and applicable protection philosophy.

DCS and PLC Integration

A distributed control system or programmable logic controller may receive measurement information through compatible monitoring equipment or signal interfaces.

The monitoring system can use this information to support operator displays, alarm handling, maintenance planning, and coordination with other plant systems.

The sensor itself should not be assumed to provide a direct PLC or DCS communication interface. Signal conditioning and appropriate input hardware are required.

Industrial Applications

The PR6424 series is intended for non-contact measurement on critical rotating machinery. Its application depends on shaft geometry, target material, probe mounting, and the complete measurement system.

1. Steam Turbines

Steam turbines operate at high rotational speeds and require reliable monitoring of shaft movement and vibration.

A properly installed PR6424 probe can measure radial shaft displacement or axial position, depending on its mounting arrangement. These measurements help operators monitor mechanical behavior and identify abnormal changes during operation.

2. Gas Turbines

Gas turbines are used in power generation and industrial process facilities. Their rotating assemblies operate under demanding mechanical and thermal conditions.

Non-contact shaft measurement helps provide information about vibration and shaft position. The sensor’s exact temperature limits and installation suitability must be confirmed for the selected probe configuration.

3. Industrial Compressors

Centrifugal and other high-speed compressors require close monitoring of rotating components. Shaft vibration and displacement measurements can help identify changes associated with imbalance, misalignment, bearing deterioration, or other mechanical conditions.

The PR6424 series can form part of a continuous machinery monitoring arrangement when installed with a compatible converter and monitoring system.

4. Pumps

Large industrial pumps are used in water treatment, chemical processing, oil and gas facilities, and power plants.

A suitable eddy current probe arrangement can monitor shaft movement and provide information about the mechanical condition of the rotating assembly.

5. Industrial Fans

Large fans and blowers may experience vibration changes caused by imbalance, bearing wear, or mechanical looseness.

Non-contact shaft measurement can supplement other vibration monitoring methods and help maintenance teams assess operating conditions.

6. Power Generation Equipment

Power plants rely on rotating machinery that must operate continuously and safely. Turbine-generator monitoring systems use displacement and vibration measurements to help detect changes in mechanical behavior.

The PR6424 series can be incorporated into an appropriate monitoring architecture for these applications.

Installation and System Integration

Correct probe installation is essential for measurement accuracy and long-term reliability. The probe position, target material, air gap, cable arrangement, and signal converter configuration must all be considered.

1. Verify the Target Material

The PR6424 series is designed for use with conductive ferromagnetic targets. Its reference target material is 42CrMo4 steel.

Different target materials can affect sensor sensitivity and calibration. If the actual shaft material differs from the reference material, verify the measurement characteristics and calibration requirements before commissioning.

2. Maintain the Correct Air Gap

The nominal center air gap for the PR6424 series is approximately 2.7 mm.

The installation gap must be established according to the applicable product instructions and measurement range. Incorrect spacing can reduce the usable measurement range or cause the output to operate outside its intended linear region.

The probe should be mechanically secured so that vibration of the mounting structure does not introduce unwanted measurement errors.

3. Confirm Mechanical Mounting

The PR6424 family uses a threaded probe mounting arrangement, with M18 × 1.5 identified in series documentation. Verify the exact mechanical configuration of the /118-000 variant before preparing the mounting hole or bracket.

Provide sufficient clearance around the sensing tip. Nearby metallic structures can influence the electromagnetic field and affect measurement performance.

4. Check Cable Routing

The sensor cable should be routed away from sources of electrical interference where possible. Avoid sharp bends, excessive pulling force, crushing, or unnecessary mechanical stress.

The cable insulation material specified for the series is PTFE. The exact cable length, connector arrangement, and whether the assembly is armored should be confirmed for the ordered variant.

5. Match the Signal Converter

The sensor must be connected to a compatible signal converter. Verify the converter model, supply voltage, signal range, connector, and cable arrangement.

A mismatch between the probe, extension cable, and converter can result in inaccurate measurements or unstable output.

6. Perform Calibration and Commissioning

After installation, establish the correct initial gap and verify the output response across the required measurement range.

Check the signal at the monitoring-system input and confirm that the displayed measurement corresponds to the actual mechanical position. Record the final installation gap and calibration information for future maintenance.

Compatible System Components

The PR6424/118-000 should be integrated with components designed for the PR6424 measurement system. The following table identifies typical component categories used in a complete installation.

Component Function Compatibility Considerations
PR6424 sensor probe Detects shaft displacement through eddy current measurement Confirm exact probe variant and target material
Compatible extension cable Connects the probe to the signal converter Verify cable type, length, connector, and electrical characteristics
CON011 signal converter Provides signal conditioning for compatible eddy current probes Confirm compatibility with the exact probe and cable configuration
Other compatible PR6424 converters Process probe signals for monitoring applications Verify model-specific electrical and output requirements
Machinery monitoring system Displays and evaluates measurement signals Confirm input type, scaling, and monitoring configuration
PLC Coordinates plant or machine-control functions Requires an appropriate signal interface or monitoring-system output
DCS Provides centralized process monitoring and alarm management Verify the available signal and communication interfaces
Probe mounting hardware Secures the probe in the required position Confirm thread, clearance, and mechanical arrangement

These are system-level component categories and examples. They should not be interpreted as a statement that all listed components are included with the sensor.

Alternative Models and Replacement Considerations

The PR6424 is part of a wider EPRO eddy current sensor portfolio. Other variants may share the 16 mm sensing-head design but differ in cable length, connector arrangement, mounting configuration, or other ordering details.

Alternative or Related Model Considerations
EPRO PR6424/000 series variants Check exact cable and mechanical configuration before substitution
EPRO PR6424/010 variants Confirm connector, cable length, and installation details
EPRO PR6424/014 variants Verify the complete suffix and electrical compatibility
EPRO PR6424/016 variants Compare the full ordering code and mechanical arrangement
EPRO PR6425 series A related sensor family with different application and temperature characteristics; not an automatic substitute

Before replacing the PR6424/118-000, check:

  • Complete sensor model and suffix.
  • Sensor head diameter.
  • Thread and mounting dimensions.
  • Cable length and connector type.
  • Armored or non-armored cable arrangement.
  • Target material and shaft dimensions.
  • Sensitivity and measurement range.
  • Signal converter compatibility.
  • Operating temperature and environmental requirements.
  • Monitoring-system input configuration.

A replacement probe should not be selected solely because it has a 16 mm sensing head. The complete measurement chain must be compatible.

Key Advantages

Non-Contact Measurement

The probe measures shaft movement without physical contact, avoiding direct mechanical wear between the sensor and the rotating target.

Suitable for Critical Rotating Machinery

The PR6424 family is designed for applications involving turbines, compressors, pumps, and fans where shaft displacement monitoring is important.

Static and Dynamic Measurement

The series supports both static position measurement and dynamic displacement measurement, allowing it to contribute to different machinery monitoring functions.

Compact 16 mm Sensor Head

The 16 mm sensing head supports installation in appropriately designed probe mounting locations.

High Measurement Sensitivity

The published series sensitivity is 4 V/mm, with linearity of up to ±1.5% under the specified reference conditions.

Industrial Environmental Capability

The PR6424 series documentation specifies a stainless-steel sleeve and PTFE cable material. Exact environmental limits should be confirmed for the selected variant.

Integration with Machinery Monitoring Systems

When paired with a compatible converter and monitoring equipment, the sensor can provide measurement data for condition monitoring and machinery protection applications.

Technical FAQs

1. What is the Epro PR6424/118-000?

It is a 16 mm non-contact eddy current sensor from the EPRO PR6424 series. It is designed to measure shaft displacement and vibration in rotating machinery.

2. What is the sensor head diameter?

The specified sensor head diameter is 16 mm.

3. How does the PR6424 sensor work?

It generates an electromagnetic field at the probe tip. When a conductive target approaches the tip, eddy currents are induced in the target, changing the electrical characteristics of the probe. A compatible converter processes this change into a measurement signal.

4. What is the typical sensitivity of the PR6424 series?

The published series sensitivity is 4 V/mm, with linearity of up to ±1.5% under the specified reference conditions.

5. What is its measurement range?

The PR6424 series has a static measurement range of ±2.0 mm and a dynamic measurement range of 0–1,000 μm.

6. What material should the sensor target be made of?

The published reference target is ferromagnetic steel, with 42CrMo4 used as the standard reference material. Different target materials may affect measurement performance.

7. Does the sensor need to touch the shaft?

No. It uses non-contact eddy current technology and measures the gap between the probe tip and the target surface.

8. Can the PR6424/118-000 connect directly to a PLC?

It should normally be used with a compatible signal converter and monitoring or signal-interface equipment. Direct PLC connection should not be assumed without checking the complete system design.

9. What is the weight of the sensor?

The supplied product weight is 0.2 kg. The PR6424 series specification sheet lists approximately 200 g for the sensor with a 1 m cable and without armor.

10. Can another PR6424 variant replace the /118-000?

Possibly, but the full model suffix, cable length, connector, mounting arrangement, and converter compatibility must be checked. Similar sensor-head dimensions do not guarantee interchangeability.

Procurement and Maintenance Recommendations

When purchasing the Epro PR6424/118-000, verify the complete model number on the product label. The suffix is important because different PR6424 variants may have different cable, connector, or mounting arrangements.

For replacement projects, compare the existing probe with the proposed unit before installation. Check the sensor head diameter, thread, cable length, connector, target material, and signal converter compatibility. If the sensor is part of a machinery protection system, verify that the replacement produces the required measurement characteristics.

For used or surplus equipment, request clear photographs of the sensor head, cable, connector, identification label, and any visible mechanical damage. Confirm whether the cable is armored and whether the quoted weight includes the complete cable assembly.

During maintenance, inspect the sensing tip for damage or contamination, check the mounting arrangement, and examine the cable for cuts, crushing, or excessive bending. Confirm the initial air gap and review the monitoring-system signal if the measured value becomes unstable.

Keep records of probe position, calibration information, converter configuration, and replacement history. These records help maintenance teams identify changes in measurement behavior and reduce the risk of incorrect replacement.

Conclusion

The Epro PR6424/118-000 16 mm Eddy Current Sensor is designed for non-contact shaft displacement and vibration measurement in critical rotating machinery. Its PR6424 series technology supports static position measurement and dynamic displacement monitoring for applications involving turbines, compressors, pumps, and fans.

With a 16 mm sensor head and a supplied weight of approximately 0.2 kg, the probe can be incorporated into appropriately designed machinery monitoring installations. Reliable performance depends on correct mounting, suitable target material, proper air-gap adjustment, and compatibility with the extension cable, signal converter, and monitoring equipment.

For industrial maintenance and replacement applications, verifying the complete /118-000 configuration is essential to ensure that the replacement sensor matches the existing measurement system.



Related Products

Get the latest price? We will reply as soon as possible (within 12 hours)

No:77501