Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |

The Epro PR6480/031-212 Eddy Current Sensor is an industrial non-contact sensing component designed for displacement and vibration monitoring in rotating machinery. It belongs to the Epro PR6480 product family and is intended for applications where mechanical movement needs to be monitored without direct physical contact between the sensor and the measured target.
Eddy-current sensing is widely used in machinery condition monitoring because it can measure the distance between a probe and an electrically conductive metallic surface. This makes the technology suitable for observing shaft movement, relative vibration, and changes in mechanical position in equipment such as turbines, compressors, pumps, and motors.
Unlike contact-based measurement devices, an eddy-current probe does not need to touch the rotating shaft. The sensing process relies on an electromagnetic field generated near the target surface. Changes in the distance between the probe and the conductive material affect the sensor’s electrical characteristics. A compatible signal-conditioning device processes these changes into measurement information for a monitoring or protection system.
The PR6480/031-212 is identified as an eddy-current sensor with an optional sensor head diameter. The final probe configuration should be selected according to the available mounting space, target geometry, required measurement range, and compatibility with the associated signal converter.
For industrial buyers, it is important to distinguish the probe itself from the complete measurement channel. A working measurement arrangement may include the sensor probe, extension cable, signal converter, monitoring input, mounting accessories, and calibration data. These components must be matched as a system to achieve reliable measurement results.
| Parameter | Specification |
|---|---|
| Brand | Epro |
| Product Model | PR6480/031-212 |
| Product Series | PR6480 |
| Product Type | Eddy Current Sensor |
| Measurement Principle | Eddy-current electromagnetic induction |
| Main Function | Non-contact displacement and vibration measurement |
| Sensor Head Diameter | Optional |
| Measuring Target | Electrically conductive metallic surface |
| Typical Measurement Applications | Shaft displacement, vibration, and position monitoring |
| Signal Processing | Requires a compatible signal-conditioning device |
| System Integration | Compatible Epro machinery monitoring arrangements, subject to configuration verification |
| Installation Type | Probe mounting with a suitable holder or bracket |
| Dimensions | Dependent on the selected sensor-head configuration |
| Shipping Weight | 3 kg |
| Typical Equipment | Turbines, compressors, pumps, motors, and rotating machinery |
Note: Detailed measurement range, sensitivity, linearity, frequency response, operating temperature, and cable configuration should be confirmed from the exact probe specification and its matched signal converter. These values should not be assumed from another PR6480 variant.
The PR6480/031-212 uses the eddy-current measurement principle to detect changes in the distance between a sensor probe and a conductive metal target. This approach is particularly useful for machinery monitoring because it allows continuous measurement without mechanical contact.
An eddy-current probe contains a sensing coil that generates an alternating electromagnetic field near its tip. When the probe is positioned close to a conductive metallic target, the field induces small circulating electrical currents in the target material.
These currents are known as eddy currents. Their interaction with the probe’s electromagnetic field changes the electrical characteristics of the sensing circuit.
The electrical response of the probe changes as the distance between the sensor and the metallic surface changes.
When a rotating shaft moves closer to or farther from the probe, the sensor’s response changes accordingly. A compatible signal converter interprets this response and produces a usable measurement signal.
The relationship between probe response and physical distance depends on the probe design, target material, cable arrangement, and calibration characteristics.
In rotating machinery, shaft displacement can provide important information about mechanical condition. Changes in shaft position may be associated with bearing wear, alignment problems, thermal expansion, mechanical loading, or other operating conditions.
An eddy-current sensor can provide continuous displacement information to a monitoring system. Engineers can use this information to identify abnormal movement and investigate possible mechanical problems.
When installed in an appropriate arrangement, the sensor can monitor the relative movement of a rotating shaft. Changes in the measured gap over time can be processed to evaluate vibration behavior.
This information can support machinery condition monitoring, trend analysis, and maintenance planning. The measurement quality depends on correct probe positioning, system calibration, and the performance of the complete measurement channel.
The raw electrical response from an eddy-current probe is not necessarily suitable for direct connection to a standard PLC or DCS analog input.
A compatible signal converter or monitoring interface is normally required to condition the probe signal. The converter must match the probe and extension-cable configuration.
For this reason, replacing a probe without checking its associated converter and cable can result in incorrect measurements or unstable system operation.
The PR6480/031-212 can serve as a sensing element within a broader machinery monitoring and protection arrangement. Its function is to provide information about mechanical movement so that monitoring equipment can evaluate machine condition.
Shaft position measurements help engineers understand the relative position of rotating components during operation. Changes may indicate mechanical movement, bearing-related issues, or changes in operating conditions.
In turbines and compressors, this information can be particularly important because shaft movement may affect clearances and machine reliability.
Eddy-current probes are commonly installed near rotating shafts to monitor relative vibration. Depending on the monitoring configuration, multiple probes may be positioned in different directions to observe shaft movement across more than one axis.
The monitoring system can process the sensor signals to identify changes in vibration trends and operating behavior.
A complete measurement channel may connect the probe to a compatible signal converter and then to a machinery monitoring system.
The monitoring equipment can display measurements, generate alarms, record trends, and provide signals to higher-level control systems. The exact integration method depends on the selected converter and monitoring platform.
Continuous measurement data can help maintenance teams identify developing mechanical problems before they result in serious equipment damage.
Historical trends can be compared with normal operating conditions to support inspection planning and maintenance decisions. Sensor data should always be interpreted alongside operating conditions and other diagnostic information.
The Epro PR6480/031-212 is intended for non-contact measurement applications involving conductive metallic targets. Its potential application areas include rotating equipment where displacement and vibration information is required.
Steam turbines contain high-speed rotating assemblies that require continuous condition monitoring. Shaft displacement and vibration measurements can help engineers evaluate rotor behavior and identify abnormal mechanical movement.
An appropriately configured eddy-current measurement channel can provide information for turbine monitoring and protection systems.
Gas turbines operate under demanding thermal and mechanical conditions. Monitoring rotating components is important for identifying changes in shaft movement and machine behavior.
Eddy-current sensing can be used as part of a broader monitoring arrangement when the probe, converter, and installation conditions meet the equipment requirements.
Large compressors are commonly used in petrochemical facilities, gas processing plants, and other continuous-production environments.
Shaft vibration and displacement information can help maintenance teams evaluate bearing conditions, rotor stability, and changes in mechanical performance.
Pumps used in critical process applications may operate continuously under varying load and flow conditions. Monitoring shaft movement can help identify abnormal mechanical behavior.
The sensor can be considered for suitable pump monitoring arrangements where the shaft material, probe installation, and measurement system are compatible.
Large motors and generators contain rotating assemblies that may require vibration and displacement monitoring.
Eddy-current probes can provide non-contact measurement of shaft movement in appropriately designed monitoring systems. The selected probe configuration must match the machine’s geometry and measurement requirements.
Other potential applications include fans, blowers, gear-driven equipment, and industrial test machinery. In each case, the sensor must be installed with the correct target material, mounting arrangement, and signal-conditioning equipment.
Correct installation is essential for measurement accuracy and long-term reliability. An eddy-current probe is part of a measurement system, so the sensor, cable, converter, and monitoring equipment must be considered together.
Before installation, verify the complete PR6480/031-212 designation and the physical probe configuration.
Check the sensor-head diameter, mounting arrangement, cable or connector type, and associated signal-conditioning equipment. Do not assume that all PR6480 probes share identical electrical characteristics.
The probe should be installed at a position that allows it to measure the intended metallic target without mechanical interference.
The mounting bracket or holder must provide adequate rigidity. Movement of the probe assembly itself can affect measurement accuracy and may produce misleading readings.
For rotating shafts, the installation position should be selected according to the machine manufacturer’s recommendations and the monitoring-system design.
The distance between the probe tip and the target surface is a critical installation parameter.
The correct gap must be established according to the probe’s calibration characteristics and the compatible converter documentation. An incorrect gap may reduce measurement range, affect linearity, or prevent the monitoring channel from operating correctly.
Do not use a generic gap value from another sensor model as a substitute for the exact configuration instructions.
The probe and its extension cable form part of the electrical measurement system. Their characteristics must match the signal converter.
Cable length, connector condition, shielding, and grounding can influence measurement performance. Avoid substituting cables or changing the system arrangement without confirming compatibility.
The sensor cable should be routed and grounded according to the system manufacturer’s recommendations.
Where possible, separate sensitive measurement cables from high-current power conductors and sources of electrical interference. Check connector security and cable condition during commissioning and maintenance.
After installation, check the probe response and signal-conditioning equipment before placing the measurement channel into service.
Confirm that the output is stable under stationary conditions and responds appropriately to controlled mechanical movement. Verify alarm settings and monitoring-channel scaling according to the equipment documentation.
The PR6480/031-212 should be evaluated as part of a complete measurement channel rather than as an isolated component.
| Component | Function | Compatibility Considerations |
|---|---|---|
| Eddy-current probe | Detects changes in distance to a conductive target | Verify exact probe model and calibration |
| Extension cable | Connects the probe to the signal converter | Match electrical characteristics and specified cable length |
| Signal converter | Conditions the probe’s electrical response | Must be compatible with the probe and cable combination |
| Machinery monitoring module | Receives and evaluates measurement signals | Confirm input type, scaling, and channel configuration |
| Probe mounting bracket | Holds the sensor in its operating position | Ensure rigidity and correct installation geometry |
| Target shaft | Provides the conductive measurement surface | Material and surface condition affect calibration |
| Monitoring software | Displays trends and alarm information | Configure according to the monitoring-system architecture |
| Control system | Receives relevant monitoring or alarm information | Confirm signal interface and protection philosophy |
The components listed above are typical parts of an eddy-current measurement arrangement. They are not necessarily included with the sensor.
The PR6480 series includes multiple sensor configurations. However, a model from the same series should not automatically be treated as a direct replacement.
| Alternative or Related Option | Replacement Considerations |
|---|---|
| Epro PR6480 series probe | Verify the complete suffix, probe geometry, electrical characteristics, and calibration |
| Epro PR6423 series probe | Compare measurement range, sensitivity, cable configuration, and converter compatibility |
| Epro PR6424 series probe | Check the probe diameter, target requirements, cable arrangement, and monitoring-system compatibility |
| Compatible Epro signal converter | Confirm that the converter supports the selected probe and cable combination |
| Complete replacement measurement channel | Consider replacing the probe, cable, and converter together when the original configuration cannot be verified |
Before selecting an alternative, compare:
A probe with a similar appearance may have different electrical characteristics. Substituting an unverified model can cause measurement errors and compromise machinery monitoring.
The sensor measures the distance to a conductive target without requiring physical contact. This is useful for monitoring rotating shafts and other moving metallic components.
Displacement and vibration information can help engineers assess mechanical behavior and identify changes that may require further inspection.
Eddy-current measurement technology is widely used in turbine, compressor, pump, and motor monitoring arrangements.
When connected to a compatible signal-conditioning and monitoring system, the probe can support continuous measurement and trend recording.
The sensor-head diameter is identified as optional, allowing the required configuration to be selected according to the installation and measurement requirements.
A correctly configured probe and converter can form part of an industrial machinery monitoring and protection channel.
The Epro PR6480/031-212 is an eddy-current sensor designed for non-contact measurement applications involving conductive metallic targets. It can be used for shaft displacement, vibration, and position monitoring when installed with compatible signal-conditioning equipment.
Its main function is to measure changes in the distance between the probe and a conductive metal surface. In rotating machinery, this information can be used to monitor shaft movement and vibration.
A compatible signal-conditioning device is normally required to process the probe’s electrical response into a usable measurement signal. The correct converter must be selected according to the complete sensor and cable configuration.
The product information identifies the sensor-head diameter as optional. The required configuration should be confirmed before ordering to ensure that the probe fits the intended mounting arrangement.
Potential applications include steam turbines, gas turbines, compressors, industrial pumps, motors, generators, and other rotating machinery requiring non-contact displacement or vibration measurement.
Yes, eddy-current probes can be used to measure relative shaft movement. The resulting signal can be processed by compatible monitoring equipment to evaluate vibration behavior.
Yes. Eddy-current sensors operate by interacting with electrically conductive materials. Target material, surface condition, geometry, and calibration characteristics can influence the measurement response.
Confirm the exact model, probe-head diameter, mounting arrangement, target material, installation gap, cable configuration, and signal-converter compatibility. Follow the applicable installation and calibration instructions.
Possible causes include loose connectors, damaged cables, incorrect installation gap, electrical interference, poor grounding, unsuitable target material, or an incompatible signal converter. The complete measurement channel should be inspected during troubleshooting.
Verify the complete model designation, probe configuration, cable arrangement, signal converter, calibration requirements, and monitoring-system input. After replacement, confirm the measurement response and channel scaling before returning the equipment to service.
When purchasing the Epro PR6480/031-212, confirm the complete product designation and the required sensor-head diameter. The probe configuration should match the original equipment and the intended monitoring application.
The listed shipping weight is 3 kg. This is a shipping specification and should not be interpreted as the weight of the sensor probe alone. Actual package contents and shipping details should be confirmed with the supplier.
For replacement projects, request clear photographs of the product label, probe head, cable, and connectors. If the sensor is supplied as part of a larger measurement assembly, confirm exactly which components are included.
During maintenance, inspect the probe mounting, cable condition, connector security, and signal stability. Avoid mechanical impacts to the probe tip and prevent contamination from interfering with the mounting arrangement.
After replacing a probe, verify the correct measurement gap and calibration. Compare the new signal response with the expected operating values before relying on the channel for machinery protection or maintenance decisions.
The Epro PR6480/031-212 Eddy Current Sensor is a non-contact measurement component intended for industrial machinery displacement and vibration monitoring. Its eddy-current operating principle allows it to detect changes in the distance between a probe and a conductive metallic target without direct physical contact.
The sensor-head diameter is an optional configuration, while the listed shipping weight is 3 kg. For reliable operation, the probe must be matched with the correct extension cable, signal converter, mounting arrangement, and monitoring input.
Accurate model identification and system compatibility checks are especially important when replacing an existing sensor in turbine, compressor, pump, or other rotating-equipment monitoring installations.