Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |

The Epro PR6425/005-010+CON021 16 mm Eddy Current Sensor is a non-contact displacement measurement system designed for monitoring the operating condition of rotating machinery. It is used in industrial environments where accurate measurement of shaft vibration, axial and radial displacement, position, and eccentricity is important for equipment protection and condition monitoring.
The system combines a PR6425 eddy current sensor probe with a CON021 signal conditioning unit. The probe detects changes in the distance between its sensing tip and a conductive target, typically a ferromagnetic steel shaft. The CON021 converter processes the sensor signal and provides an electrical output suitable for connection to compatible monitoring and control equipment.
Unlike contact-based measurement devices, the PR6425 sensor does not need to physically touch the rotating shaft. This non-contact operating principle helps avoid mechanical wear at the measurement point and allows continuous monitoring of machinery during operation.
The PR6425 family is designed for demanding rotating equipment applications, including steam turbines, gas turbines, compressors, pumps, and industrial fans. Its high-temperature capability makes it particularly relevant to machinery where conventional proximity probes may not tolerate the operating environment.
With a 16 mm sensor head and a supplied listing weight of 0.62 kg for the configured product, the PR6425/005-010+CON021 can be considered for industrial machinery monitoring installations that require a compatible probe and signal conditioning arrangement.
The complete probe and converter configuration must be verified before installation. Different CON021 variants support different measurement ranges, so the exact converter suffix and probe compatibility are important when replacing an existing measurement system.
| Parameter | Specification |
|---|---|
| Brand | Epro |
| Manufacturer | Emerson |
| Sensor Model | PR6425/005-010 |
| Signal Conditioner | CON021 |
| Complete Model | PR6425/005-010+CON021 |
| Product Type | Eddy Current Sensor System |
| Sensor Technology | Non-contact eddy current measurement |
| Sensor Head Diameter | 16 mm |
| Sensor Body Thread | M18 × 1.5 |
| Measurement Target | Ferromagnetic steel |
| Sensitivity | 4 V/mm (101.6 mV/mil) |
| Sensitivity Tolerance | ±2.0% maximum |
| Static Measurement Range | ±2.0 mm |
| Dynamic Measurement Range | 0–1,000 μm |
| Nominal Center Air Gap | Approximately 2.6 mm |
| Linearity Error | ≤ ±2.0% |
| Long-Term Drift | Less than 0.3% |
| Maximum Surface Speed | 2,500 m/s |
| Minimum Shaft Diameter | 80 mm |
| Probe Operating Temperature | -35°C to +380°C |
| Short-Term Temperature Excursion | Up to 400°C for less than 4 hours |
| Cable Temperature | First meter: up to 380°C; remaining length: up to 200°C |
| Temperature Error | Less than 4% per 100 K |
| Shock and Vibration Resistance | 5 g at 60 Hz and 25°C |
| Probe Sleeve Material | Stainless steel |
| Cable Material | PTFE |
| Sensor Head Material | Ceramic sensing tip |
| Sensor Head Diameter | 16 mm |
| Weight Provided | 0.62 kg |
Important: The specifications above describe the PR6425 sensor family and the supplied product listing. The exact measuring range and output configuration must be confirmed against the complete CON021 converter model. The 0.62 kg value is retained as the supplied listing weight.
The PR6425/005-010+CON021 operates using the eddy current measurement principle. This technology is widely used in rotating machinery monitoring because it can detect small changes in the distance between a sensor and a conductive target without requiring physical contact.
The sensor probe contains an electrical coil that generates an alternating electromagnetic field when energized by the compatible signal conditioning system.
When the probe approaches a conductive metallic target, such as a rotating steel shaft, the electromagnetic field induces eddy currents in the target material.
These currents influence the electromagnetic characteristics of the probe coil. Changes in the distance between the probe and the target therefore produce measurable changes in the electrical response.
The sensor system uses these changes to determine the relative position of the target surface.
As a shaft rotates, its position may change because of vibration, thermal expansion, mechanical loading, bearing movement, or alignment conditions.
The PR6425 probe detects these changes without touching the shaft. This makes it suitable for continuous monitoring of radial and axial displacement in critical rotating machinery.
Non-contact measurement is particularly valuable in applications where mechanical contact would introduce wear, interfere with machine operation, or damage the sensing equipment.
The raw electrical response from the probe requires suitable signal conditioning before it can be used by monitoring equipment.
The CON021 converter processes the probe signal and produces an output corresponding to the measured displacement. The converter must be compatible with the specific PR6425 probe configuration.
Its output can be connected to an appropriate machinery monitoring system, provided that the input characteristics and measurement range are correctly matched.
The exact converter variant determines important measurement characteristics. Therefore, engineers should confirm the complete CON021 part number rather than relying on the general CON021 designation alone.
The system can support two important types of machinery measurement:
These measurements provide information that can help maintenance teams evaluate machinery condition and identify abnormal operating behavior.
When installed at suitable measurement points, the sensor can provide continuous displacement information to a machinery protection or condition-monitoring system.
Changes in the measured signal may indicate developing mechanical problems. However, sensor readings should always be evaluated alongside operating speed, load, temperature, vibration trends, and other available diagnostic information.
The PR6425/005-010+CON021 is intended to function as part of a larger machinery monitoring arrangement rather than as an independent machine protection system.
Its role is to provide displacement-related measurement signals to compatible monitoring equipment.
Steam and gas turbines contain high-speed rotating components that require continuous monitoring. Shaft displacement measurements can help maintenance teams identify changes in rotor behavior and evaluate mechanical stability.
The PR6425’s high-temperature capability makes it suitable for selected measurement locations where elevated temperatures are expected, subject to the probe and cable temperature limits.
Industrial compressors operate under changing pressure, temperature, and mechanical load conditions. Shaft vibration and position measurements help engineers evaluate rotor behavior and identify unusual movement.
The sensor can be installed at suitable radial or axial measurement locations according to the machinery monitoring design.
Changes in shaft position relative to a bearing housing may provide useful information about bearing clearance, shaft movement, and mechanical condition.
The PR6425 sensor can support this type of monitoring when the probe is installed at an appropriate measurement point and the target surface meets the required material and geometric specifications.
The conditioned output from the CON021 can be connected to compatible monitoring equipment or control-system inputs.
Before integration, engineers should verify signal type, measurement range, scaling, grounding, and electrical interface requirements. The sensor should not be connected directly to an arbitrary PLC input without checking the converter’s output specifications.
The Epro PR6425/005-010+CON021 is designed primarily for industrial machinery where non-contact shaft measurement is required.
Steam turbines operate under high mechanical and thermal loads. Monitoring shaft displacement is important for evaluating rotor movement and identifying abnormal operating conditions.
The PR6425 sensor’s high-temperature capability makes it suitable for selected turbine monitoring positions, provided that the installation respects the specified probe and cable temperature limits.
Gas turbines require reliable monitoring because rotor vibration and displacement can affect mechanical performance and equipment availability.
The sensor can provide non-contact shaft measurement signals to a compatible monitoring system, supporting machinery condition evaluation during operation.
Large compressors are commonly used in chemical processing, petrochemical production, gas transportation, and industrial manufacturing.
The PR6425 sensor can monitor shaft movement and vibration at suitable measurement locations. These readings can help maintenance teams evaluate changes in rotor behavior over time.
Large pumps used in power generation, water treatment, and process industries may require continuous shaft monitoring.
The sensor can support displacement measurement in suitable pump installations, particularly where rotating machinery condition monitoring is part of the maintenance strategy.
Large ventilation and process fans may experience imbalance, shaft movement, and changing mechanical loads.
Non-contact displacement measurement can provide additional information about rotating shaft behavior and help identify abnormal trends.
Power stations rely on turbines, generators, compressors, pumps, and auxiliary rotating machinery.
The PR6425 sensor can be incorporated into suitable monitoring systems to provide shaft displacement information for machinery protection and maintenance activities.
Petrochemical facilities operate critical rotating equipment under demanding conditions. Continuous monitoring can help maintenance teams identify abnormal mechanical behavior before it develops into a serious equipment problem.
The PR6425 sensor is suitable for selected high-temperature rotating machinery monitoring applications when its complete measurement configuration is correctly specified.
Correct installation is essential for achieving stable measurement performance. Sensor positioning, target material, cable routing, and converter compatibility all affect the quality of the measurement signal.
Before installation, verify that the PR6425/005-010 probe is compatible with the selected CON021 converter variant.
The CON021 family includes different measurement-range configurations. Using an incorrectly matched converter can produce inaccurate readings or an unsuitable output range.
Check the complete part numbers and the manufacturer’s compatibility documentation before connecting the equipment.
The probe should be mounted at a position that provides a stable view of the intended shaft measurement surface.
The PR6425 installation guidance specifies a minimum shaft diameter of approximately 80 mm for the relevant measurement arrangement. The surrounding metallic geometry must also meet the minimum measuring-area requirements.
Avoid placing the probe too close to nearby conductive objects that could interfere with the electromagnetic field.
The nominal center air gap for the PR6425 sensor is approximately 2.6 mm.
Correct probe positioning is essential for obtaining the intended measurement range. The initial gap should be established according to the manufacturer’s installation instructions and the exact converter configuration.
An incorrect gap may reduce available measurement range or cause the signal to operate outside its intended linear region.
Eddy current sensors depend on the electrical and magnetic properties of the target material.
The PR6425 specifications identify ferromagnetic steel, such as 42CrMo4, as the standard target material.
If the shaft material differs from the specified reference material, engineers should evaluate the effect on measurement sensitivity and calibration.
The PR6425 is designed for high-temperature measurement applications. However, the probe and cable have different temperature limits.
The first meter of cable can operate at temperatures up to 380°C, while the remaining cable length is specified for temperatures up to 200°C.
Cable routing should therefore consider the actual temperature distribution around the machinery. Avoid placing the cable in locations where it may exceed its specified operating limits.
The armored cable should be routed without excessive bending, twisting, or mechanical tension.
Maintain the required minimum bending radius and protect the cable from sharp edges, vibration damage, and contact with hot machine surfaces beyond its rated temperature.
Secure the cable so that it cannot move freely during machine operation.
Install the CON021 converter in a suitable protected location and follow the manufacturer’s wiring instructions.
Check the supply requirements, probe connections, output terminals, grounding arrangement, and receiving equipment interface.
Do not assume that all CON021 variants have identical wiring or output characteristics.
After installation, verify the initial air gap and confirm that the converter output corresponds to the expected displacement.
Where applicable, compare the sensor readings with a known reference or the manufacturer’s calibration procedure.
Check signal stability before placing the machinery monitoring system into normal service.
The PR6425/005-010+CON021 operates as part of a complete measurement and monitoring arrangement.
| Component | Function | Compatibility Considerations |
|---|---|---|
| PR6425 Sensor Probe | Detects shaft displacement through eddy current measurement | Confirm the complete probe model and cable configuration |
| CON021 Signal Conditioner | Processes the probe signal | Match the converter variant and measurement range to the probe |
| Machinery Protection System | Monitors displacement and vibration signals | Verify input characteristics and channel configuration |
| PLC or DCS | Receives suitable measurement information for process monitoring | Confirm signal type, scaling, and electrical interface |
| Monitoring Cabinet | Houses signal conditioning and monitoring equipment | Provide suitable environmental protection and wiring separation |
| Sensor Mounting Bracket | Positions the probe relative to the shaft | Ensure mechanical stability and correct alignment |
| Sensor Extension Cable | Connects the probe to the converter where required | Verify connector type, cable length, and electrical compatibility |
| Grounding and Shielding Components | Help reduce electrical interference | Follow the manufacturer’s grounding and shielding requirements |
The components listed above describe a typical monitoring arrangement. They are not necessarily included with every product listing.
The PR6425 belongs to the Epro PR642x family of eddy current sensors. Related models may have different sensing-head diameters, measurement ranges, and operating characteristics.
| Model | Sensor Type | Main Difference |
|---|---|---|
| PR6423 Series | Eddy current sensor | 8 mm sensor head for different installation requirements |
| PR6424 Series | Eddy current sensor | 16 mm sensor head for general shaft displacement monitoring |
| PR6425 Series | Eddy current sensor | 16 mm sensor head designed for high-temperature applications |
| PR6426 Series | Eddy current sensor | 32 mm sensor head for larger measurement arrangements |
These models should not be considered direct replacements without a technical review.
Before selecting an alternative, compare:
For critical turbine or compressor applications, replacement selection should follow the original machinery monitoring design. A sensor with the same nominal diameter may still have different measurement characteristics or converter compatibility.
The PR6425 detects shaft displacement without physical contact. This helps avoid mechanical wear at the measurement point and allows continuous monitoring during machinery operation.
The probe is designed for demanding temperature conditions, with a specified operating range extending to 380°C. This makes it relevant to selected turbine and other high-temperature rotating machinery applications.
The sensor supports measurement of radial and axial shaft movement, providing useful information for machinery condition monitoring.
The specified sensitivity of 4 V/mm supports the detection of small changes in probe-to-target distance.
The stainless steel sleeve and ceramic sensing tip are designed for industrial measurement environments.
When paired with the appropriate CON021 converter, the sensor provides a conditioned output suitable for compatible machinery monitoring equipment.
Continuous shaft measurement can help maintenance teams identify changes in machinery behavior and evaluate developing mechanical problems.
It is a non-contact eddy current sensor system consisting of a PR6425 probe and a CON021 signal conditioning unit. It is used for measuring shaft displacement and vibration in rotating machinery.
The PR6425 sensor has a nominal 16 mm sensor head diameter, with a specified head dimension of approximately 15.8 mm in the manufacturer’s installation information.
It uses the eddy current principle. An alternating electromagnetic field interacts with a conductive target, and changes in the probe’s electrical response are used to determine the distance between the sensor and the target.
The PR6425 probe is specified for an operating temperature range of -35°C to +380°C. Short-term excursions up to 400°C are specified for periods shorter than four hours, subject to the manufacturer’s conditions.
The specified sensitivity is 4 V/mm, equivalent to approximately 101.6 mV/mil, with a maximum tolerance of ±2.0%.
Yes. The sensor can detect dynamic changes in the distance between the probe and the shaft. These measurements can be used for shaft vibration monitoring when connected to compatible signal conditioning and monitoring equipment.
The standard target material specified for the PR6425 is ferromagnetic steel, with 42CrMo4 identified as the reference material.
The CON021 processes the electrical response from the PR6425 probe and provides a conditioned output for compatible machinery monitoring equipment. Its exact measurement range depends on the complete converter model.
Compatibility must be checked against the complete part numbers. Different CON021 variants support different PR6425 measurement ranges, so a converter should not be substituted solely because it belongs to the same product family.
Verify the complete probe model, converter suffix, sensor head diameter, cable length, target material, operating temperature, measurement range, mounting thread, and monitoring-system interface. These details help prevent incorrect measurements and compatibility problems.
When purchasing the Epro PR6425/005-010+CON021, verify the complete probe and converter configuration. The PR6425 probe and CON021 signal conditioner must be compatible in terms of measurement range and electrical characteristics.
For replacement projects, compare the model numbers on the installed equipment with the proposed replacement. Pay particular attention to the CON021 suffix because different versions may have different measurement ranges.
Before installation, inspect the sensor head, ceramic tip, threaded sleeve, armored cable, connectors, and converter terminals. Physical damage to the sensing surface or cable may affect measurement stability.
During routine maintenance, check the mechanical stability of the probe mounting, cable condition, connector security, and signal consistency. Compare current readings with historical operating trends to identify unexpected changes.
For critical machinery, retain records of the initial air gap, calibration details, converter configuration, and commissioning measurements. These records help maintenance teams diagnose signal problems and perform future replacements accurately.
When purchasing used or surplus equipment, request clear photographs of the probe identification label, converter model, cable connections, and physical condition. Confirm whether the quoted weight refers to the sensor assembly alone or the complete probe-and-converter package.
The Epro PR6425/005-010+CON021 16 mm Eddy Current Sensor is designed for non-contact measurement of shaft displacement and vibration in industrial rotating machinery. Its combination of a PR6425 probe and CON021 signal conditioner supports continuous monitoring in applications such as turbines, compressors, pumps, and other critical rotating equipment.
With a specified sensitivity of 4 V/mm, a nominal 2.6 mm center air gap, and high-temperature capability up to 380°C, the PR6425 is suitable for selected demanding machinery monitoring installations.
For reliable operation, engineers should verify the probe and converter combination, measurement range, target material, initial air gap, and cable temperature limits. Accurate model matching and proper installation are essential when using this sensor for industrial machinery condition monitoring.