Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |

The Epro PR6426/010-110+CON021/916-120 32 mm Eddy Current Sensor is a non-contact displacement measurement assembly designed for monitoring the movement and position of rotating machinery components. It combines a PR6426/010-110 eddy current sensor with a CON021/916-120 signal converter to provide a measurement chain for industrial machinery protection and condition monitoring systems.
The assembly is intended for demanding rotating-equipment applications, including steam turbines, gas turbines, hydro turbines, compressors, pumps, and large industrial fans. These machines require continuous monitoring because changes in shaft position, eccentricity, and vibration can indicate developing mechanical problems.
The PR6426 sensor operates according to the eddy current measurement principle. It generates an electromagnetic field near a conductive target, such as a rotating steel shaft. Changes in the distance between the sensor tip and the target affect the electrical characteristics of the sensing circuit. The resulting measurement can be processed by the signal converter and supplied to a compatible monitoring or protection system.
The sensor has a nominal 32 mm head diameter and is designed for large-shaft measurement applications. Its non-contact operating principle avoids mechanical contact with the rotating surface, making it suitable for continuous monitoring of machinery operating at high speeds or under demanding environmental conditions.
The CON021/916-120 converter is configured for the PR6426 extended-range measurement arrangement. This is important because the converter configuration determines the measurement range and the characteristics of the complete sensor chain. The probe and converter should therefore be treated as a matched measurement system rather than interchangeable independent components.
For industrial maintenance teams, the PR6426/010-110+CON021/916-120 provides a measurement solution for monitoring shaft displacement and related mechanical conditions. Its measurements can support machinery diagnostics, operating-condition assessment, and protective shutdown strategies when integrated with an appropriate monitoring system.
| Parameter | Specification |
|---|---|
| Brand | Epro |
| Product Series | PR6426 |
| Sensor Model | PR6426/010-110 |
| Signal Converter | CON021/916-120 |
| Complete Model | PR6426/010-110+CON021/916-120 |
| Product Type | Eddy Current Sensor and Signal Converter Assembly |
| Sensor Principle | Non-contact eddy current measurement |
| Sensor Head Diameter | 32 mm |
| Sensor Mounting | 80 × 40 mm mounting plate configuration |
| Sensor Sleeve Material | Stainless steel |
| Sensor Cable Material | PTFE |
| Standard Sensor Sensitivity | 2 V/mm (50.8 mV/mil), ±1.5% maximum |
| Standard PR6426 Static Range | ±4.0 mm |
| Converter Configuration | 12.0 mm extended-range configuration |
| Frequency Range | Up to 20 kHz (-3 dB), according to the compatible measurement-chain specification |
| Nominal Center Air Gap | Approximately 5.5 mm for the standard PR6426 configuration |
| Target Material | Ferromagnetic steel |
| Typical Target Reference | 42CrMo4 standard steel |
| Sensor Operating Temperature | Approximately -35 to +175°C, subject to the applicable sensor specification |
| Short-Term Temperature Excursion | Up to 200°C for less than 4 hours, subject to specification limits |
| Sensor Head Pressure Resistance | Approximately 6,500 hPa |
| Shock and Vibration | 5 g at 60 Hz and 25°C |
| Sensor Weight Reference | Approximately 0.8 kg for sensor with 1 m unarmored cable |
| Supplied Listing Weight | 0.92 kg |
| Typical Applications | Turbines, compressors, pumps, fans, and rotating machinery |
Important specification note: The ±4.0 mm value refers to the standard PR6426 sensor measurement range. The CON021/916-120 is an extended-range converter configuration identified for a 12.0 mm range. The actual measurement-chain range, output scaling, initial gap, and calibration must be confirmed from the matched sensor and converter documentation.
The PR6426/010-110 uses eddy current technology to measure the distance between the sensor head and a conductive target. Unlike contact-based displacement devices, it does not need to touch the rotating shaft.
The sensor and converter work together to transform changes in shaft position into an electrical measurement that can be interpreted by a machinery monitoring system.
The sensor contains an electromagnetic coil that generates a high-frequency field around its sensing tip. When a conductive metallic target enters this field, eddy currents are induced in the target surface.
The strength and characteristics of these currents depend on the distance between the sensor and the target, as well as the target material and geometry.
As the shaft moves closer to or farther away from the sensor, the electromagnetic interaction changes. The sensing electronics detect this change and use it to determine the relative distance between the sensor and the target.
This allows the system to monitor shaft movement without physical contact. The measurement can be used to identify changes in radial position, axial position, and other mechanical conditions supported by the installation.
The PR6426 sensor operates with a compatible CON021 signal converter. The converter processes the sensor signal and provides a standardized electrical output for a connected monitoring system.
The CON021/916-120 designation identifies an extended-range configuration for the PR6426 sensor family. Its range and scaling characteristics must be matched to the installed sensor and monitoring equipment.
In addition to static shaft position, the measurement chain can support dynamic monitoring of shaft movement. Periodic changes in the sensor-to-shaft gap can be analyzed to evaluate shaft vibration and mechanical behavior.
The measurement system’s usable frequency response depends on the complete sensor-converter arrangement and the receiving monitoring equipment.
Because the sensor does not physically contact the rotating shaft, it avoids the mechanical wear associated with contact probes. This makes it suitable for continuous measurement on rotating machinery where direct mechanical contact would be impractical.
The sensor must still be mounted securely and aligned correctly. Mechanical stability and suitable target surface conditions are essential for reliable readings.
The PR6426/010-110+CON021/916-120 is typically used as part of a machinery condition monitoring arrangement. It supplies displacement-related information that can help operators and maintenance engineers assess the operating condition of critical rotating equipment.
Shaft position is an important parameter in turbines, compressors, and other large rotating machines. Changes in shaft position may result from bearing wear, thermal expansion, mechanical displacement, or changes in operating conditions.
The sensor provides a non-contact measurement of the distance between its sensing tip and the shaft surface. When installed at suitable measurement locations, it can support monitoring of radial or axial shaft movement.
Rotating shafts may experience vibration caused by imbalance, misalignment, looseness, bearing deterioration, or other mechanical conditions.
A suitable eddy current measurement arrangement can detect dynamic changes in shaft position. Monitoring equipment can then process the signal to evaluate vibration characteristics and identify abnormal trends.
For critical equipment, measurement signals may be connected to a machinery protection system. Configured alarm and trip limits can help identify operating conditions that require operator attention or protective action.
The sensor itself does not perform the complete protection function. Reliable protection depends on the entire measurement chain, monitoring hardware, configured limits, logic, and shutdown interfaces.
Continuous shaft monitoring provides historical information that can help maintenance teams identify changes before a major failure occurs.
By reviewing displacement and vibration trends, engineers can investigate developing mechanical problems and schedule inspections or maintenance according to equipment condition.
The PR6426 32 mm eddy current sensor is intended for large rotating machinery where shaft displacement measurement is important for operating reliability.
Steam turbines operate under high rotational speeds and changing thermal conditions. Shaft displacement monitoring helps maintenance personnel evaluate rotor movement and identify unusual mechanical behavior.
The PR6426 sensor can be installed at appropriate measurement points to monitor shaft position and dynamic movement. Its readings can contribute to the machinery monitoring strategy used by the turbine control and protection system.
Gas turbines are critical assets in power generation and industrial energy systems. Their rotating assemblies require reliable monitoring to identify mechanical changes during operation.
Eddy current sensors can be used to monitor shaft movement without physical contact. Measurement data can help engineers assess operating stability and investigate changes in vibration or shaft position.
Hydro turbines operate in power-generation environments where long-term machinery condition monitoring is important. Shaft movement can be influenced by hydraulic forces, bearing conditions, and mechanical alignment.
A suitable displacement measurement arrangement can help monitor the relative position of rotating components and support maintenance decisions.
Large compressors are widely used in petrochemical plants, refineries, gas processing facilities, and industrial production systems.
Shaft displacement monitoring can help identify changes associated with rotor imbalance, bearing wear, or mechanical misalignment. Continuous measurement is particularly valuable where an unexpected compressor shutdown could interrupt production.
Large pumps used in power plants, water facilities, and process industries may require shaft-position and vibration monitoring.
A non-contact sensor can provide measurement information without interfering with the rotating assembly. The final installation should account for shaft dimensions, target material, operating speed, and mounting geometry.
Large fans and ventilation systems may operate continuously in demanding industrial environments. Monitoring shaft movement can help identify mechanical changes that could affect equipment reliability.
The sensor can form part of a broader condition monitoring arrangement when the measurement range and installation conditions are suitable.
Correct installation is essential for measurement accuracy and long-term operating stability. The sensor, converter, mounting arrangement, cables, and monitoring equipment must be treated as a complete measurement chain.
Before installation, verify that the PR6426/010-110 sensor is compatible with the CON021/916-120 converter configuration.
The converter suffix is important because different CON021 variants may provide different extended measurement ranges. A converter intended for another sensor model or range should not be substituted without checking the manufacturer’s compatibility information.
The sensor should be installed at a location that provides a stable measurement of the target shaft surface.
The mounting plate must be secured firmly to prevent unwanted movement. Vibration or looseness at the mounting point can introduce measurement errors and affect the interpretation of shaft movement.
For the PR6426/010-110 configuration, follow the specified mounting arrangement and clearance requirements.
The sensor is designed for use with suitable ferromagnetic steel targets. Target material, shaft diameter, surface condition, and geometry can affect measurement performance.
The sensor should be positioned according to the required initial gap and measurement range. Avoid installing it where the sensing field may be affected by nearby ferrous structures or unsuitable metallic components.
Use the specified sensor cable and connector arrangement. Protect the cable from excessive bending, abrasion, heat, and mechanical damage.
Keep the measurement cable away from high-current power conductors where required by the installation guidelines. Proper cable routing can help reduce electrical interference and improve signal stability.
The CON021 signal converter should be mounted in an appropriate electrical enclosure or control panel. Its operating environment must remain within the specified temperature and protection limits.
The converter requires a compatible DC supply and correct signal connections. Follow the wiring diagram for the exact converter version rather than assuming terminal assignments are identical across all variants.
After installation, configure the receiving monitoring equipment according to the sensor-converter measurement range and output scaling.
Confirm the measurement units, alarm limits, channel settings, and signal polarity. Incorrect scaling can cause displayed shaft displacement to differ from the actual mechanical movement.
Before placing the machinery into normal operation, verify the sensor mounting, cable condition, converter supply, initial gap, and signal output.
Compare the displayed measurement with the expected mechanical position where practical. Check that the signal responds consistently to changes in shaft position and that alarm functions operate according to the configured limits.
The PR6426/010-110+CON021/916-120 operates as part of a wider machinery monitoring installation. The following components may be used depending on the application and monitoring architecture.
| Component | Function | Integration Considerations |
|---|---|---|
| PR6426/010-110 Sensor | Detects shaft displacement through eddy current measurement | Confirm probe mounting, target material, and sensor condition |
| CON021/916-120 Converter | Processes the sensor signal and provides a measurement output | Verify extended-range configuration and sensor compatibility |
| Machinery Monitoring Module | Receives and evaluates measurement signals | Confirm input type, signal range, and scaling |
| Vibration Monitoring System | Evaluates shaft movement and vibration trends | Configure measurement channels and alarm limits correctly |
| PLC or DCS | Uses monitoring information for plant supervision and process coordination | Confirm signal interface and system architecture |
| Industrial DC Power Supply | Provides the required supply for compatible converter electronics | Follow the converter’s specified voltage and polarity |
| Sensor Cable | Transfers the sensor signal to the converter | Use the correct cable and connector arrangement |
| Mounting Plate and Hardware | Secures the sensor at the measurement point | Maintain mechanical rigidity and correct alignment |
| Control Cabinet | Houses signal converters and monitoring equipment | Provide suitable temperature and environmental conditions |
The listed components describe a typical monitoring arrangement. They are not necessarily included with the sensor assembly.
The PR6426 family includes different sensor and converter configurations. Replacement selection should focus on the complete measurement chain rather than the sensor diameter alone.
| Alternative or Related Model | Application Considerations |
|---|---|
| PR6426 with standard-range CON021 | Suitable where the standard PR6426 measurement range meets the application |
| PR6426 with CON021/916-160 | Extended-range configuration identified for a 16.0 mm measurement range |
| PR6426 with CON021/916-200 | Extended-range configuration identified for a 20.0 mm measurement range |
| PR6426 with CON021/916-240 | Extended-range configuration identified for a 24.0 mm measurement range |
| PR6424 sensor system | A different sensor family configuration; probe dimensions and measurement range must be checked |
| PR6423 sensor system | A smaller sensor family intended for different shaft measurement requirements |
Before replacing the PR6426/010-110+CON021/916-120 assembly, compare:
A sensor with the same nominal diameter may not provide the same measurement range or output characteristics. Always verify the complete part number and the corresponding technical documentation.
The eddy current principle allows shaft displacement to be measured without physical contact. This reduces mechanical wear at the sensing point and supports continuous monitoring of rotating equipment.
The 32 mm sensing head is designed for large-shaft measurement applications. It is intended for machinery where a larger measurement range and suitable mounting arrangement are required.
The CON021/916-120 provides a specified extended-range configuration for the PR6426 sensor family. This makes the complete assembly suitable for applications where the standard measurement range is insufficient, subject to the manufacturer’s measurement-chain specifications.
The sensor-converter arrangement can support monitoring of shaft movement and dynamic displacement. This information is useful for evaluating rotating-machine behavior.
The PR6426 family is designed for critical rotating machinery such as turbines, compressors, pumps, and fans. It can be incorporated into condition monitoring and machinery protection installations.
The sensor sleeve uses stainless steel, while the specified cable material is PTFE. These construction materials are intended for demanding industrial measurement environments within the applicable operating limits.
Continuous measurement data can help maintenance teams identify changes in shaft behavior and investigate developing mechanical problems before they result in major equipment downtime.
It is a 32 mm eddy current sensor assembly consisting of a PR6426/010-110 sensor and a CON021/916-120 signal converter. It is designed for non-contact shaft displacement measurement in large rotating machinery.
The PR6426/010-110 has a nominal sensor head diameter of 32 mm. Its mounting arrangement and required clearance should be checked before installation.
The CON021/916-120 processes the sensor signal and provides a corresponding measurement output. Its suffix identifies an extended-range configuration for the PR6426 sensor family.
The CON021/916-120 is identified as a 12.0 mm extended-range configuration. The PR6426 sensor’s standard static measurement range is ±4.0 mm. The actual operating range and output scaling must be confirmed from the complete matched measurement-chain documentation.
The standard PR6426 specification lists a sensitivity of 2 V/mm (50.8 mV/mil), with a maximum deviation of ±1.5%. For an extended-range arrangement, use the converter-specific scaling information rather than assuming the standard sensitivity applies unchanged.
Typical applications include steam turbines, gas turbines, hydro turbines, compressors, pumps, and industrial fans. It is intended for suitable large rotating machinery where non-contact shaft displacement monitoring is required.
No. The PR6426 uses eddy current technology to measure the distance to a conductive target without physical contact. Correct installation and initial-gap adjustment are still necessary.
The PR6426 specification identifies ferromagnetic steel as the target material, with 42CrMo4 used as a standard reference material. Other materials should be evaluated against the manufacturer’s calibration and compatibility requirements.
Verify the complete sensor and converter part numbers, head diameter, mounting arrangement, cable length, converter range, output scaling, and monitoring-system compatibility. A replacement with a similar appearance may have different measurement characteristics.
The supplied listing weight is 0.92 kg. A published sensor specification gives approximately 0.8 kg for the sensor with 1 meter of unarmored cable. The figures may refer to different assembly contents or cable configurations. Confirm whether the supplied weight includes the converter, mounting hardware, connectors, and additional cable.
When purchasing the Epro PR6426/010-110+CON021/916-120, verify that both the sensor and signal converter are included and that their part numbers match the required measurement configuration.
The converter suffix is particularly important. Different CON021 variants can provide different extended measurement ranges, and using an incorrect converter may result in unsuitable measurement scaling or an incompatible measurement chain.
For replacement and maintenance projects, inspect the sensor head, mounting plate, cable jacket, connector, and converter terminals. Check for mechanical damage, contamination, loose connections, and signs of excessive heat exposure.
Before installation, compare the new assembly with the existing equipment. Confirm the sensor mounting dimensions, cable routing, converter wiring, supply requirements, and monitoring-system input settings.
During operation, review shaft displacement and vibration trends rather than relying only on individual readings. Sudden changes, persistent drift, or unstable signals may indicate a mechanical problem, installation issue, cable fault, or measurement-chain configuration error.
Keep the original calibration and configuration information available for future maintenance. Record the installed sensor and converter model numbers, measurement range, initial gap, output scaling, and alarm settings. This documentation helps reduce commissioning time during future replacement work.
The Epro PR6426/010-110+CON021/916-120 is a 32 mm non-contact eddy current measurement assembly designed for shaft displacement monitoring in large rotating machinery. Combining the PR6426 sensor with the CON021/916-120 extended-range converter provides a measurement chain for applications involving turbines, compressors, pumps, and industrial fans.
Its non-contact operating principle, industrial sensor construction, and extended-range converter configuration make it relevant to machinery condition monitoring and protection systems. For reliable performance, the sensor and converter must be correctly matched, mounted, calibrated, and integrated with compatible monitoring equipment.
When sourcing this assembly, verify the complete part number, included components, cable configuration, measurement range, and actual supplied weight to ensure it meets the requirements of the intended installation.