Company Information
E-mail		[email protected]
Mobile		+8615980777398
Whatsapp		+8615980777398
WeChat		15980777398

Allen-Bradley 20G1G3D710LNDNNNNN PowerFlex 755 AC Drive

1. Product Overview

The Allen-Bradley 20G1G3D710LNDNNNNN is a high-power industrial AC variable frequency drive belonging to the PowerFlex 755 series.

It is designed for large three-phase AC motors used in demanding industrial environments where conventional low-power variable frequency drives are not sufficient.

With a 480 VAC-class input and a 710 A-class power rating, this model is positioned in the high-power Frame 8 range of the PowerFlex 755 family.

Its approximately 600 hp Normal Duty rating makes it suitable for large pumps, fans, blowers, conveyors, compressors, mixers, material-handling systems, and other heavy industrial machinery.

The drive is designed not only to control motor speed, but also to become an important part of a complete industrial automation system.

Depending on the selected configuration, the PowerFlex 755 platform can provide advanced motor-control functions, feedback capability, communication, diagnostics, adjustable acceleration and deceleration, and other application-oriented functions.

The 20G1G3D710LNDNNNNN is therefore best regarded as a high-capacity industrial motor-control platform rather than simply a large inverter.

---

2. Brand and Product Series

Item	Description
Brand	Allen-Bradley
Product Family	PowerFlex
Series	PowerFlex 755
Product Type	High-Power AC Variable Frequency Drive
Catalog Number	20G1G3D710LNDNNNNN
Voltage Class	480 VAC
Input	Three-phase AC
Power Class	710 A
Frame	Frame 8
Cooling	Forced-air cooled
Installation	Floor-mounted / industrial cabinet
Main Function	Variable-speed AC motor control
Typical Application Level	Large industrial machinery

The PowerFlex 755 series is intended for industrial applications where the drive needs to provide considerably more functionality than a basic compact inverter.

It is particularly useful when the motor is large, the load changes during operation, controlled acceleration is important, or the drive must exchange operating information with a larger automation system.

---

3. Model Identification

The catalog number 20G1G3D710LNDNNNNN contains configuration information defining the drive family, input arrangement, voltage class, power rating, and other options.

For practical product identification, the most important section is D710.

The D designation corresponds to the 480 VAC / 650 VDC class, while 710 identifies the high-current drive rating.

This places the product in the upper section of the 480 VAC PowerFlex 755 Frame 8 range.

Parameter	Specification
Model	20G1G3D710LNDNNNNN
Drive Family	PowerFlex 755
Voltage Code	D
Voltage Class	480 VAC
Input	3-phase AC
Current Rating Class	710 A
Light-Duty Rating	Approx. 650 hp
Normal-Duty Rating	Approx. 600 hp
Heavy-Duty Rating	Approx. 450 hp
Frame	Frame 8
Cooling	Forced air
Drive Type	AC adjustable-frequency drive
Installation	Industrial floor/cabinet installation
Typical Motor Application	Large industrial AC motors

The duty rating is an important part of selecting this model.

A large motor driving a relatively smooth centrifugal fan load may have very different drive requirements from a conveyor that starts under a heavy load or a mixer that experiences sudden increases in torque.

For that reason, the correct selection should always consider motor current and the actual operating profile of the machine.

---

4. Main Technical Parameters

Parameter	Specification
Model	20G1G3D710LNDNNNNN
Brand	Allen-Bradley
Series	PowerFlex 755
Voltage	480 VAC class
Input Voltage Class	480 VAC
Input Phase	3-phase
Input Frequency	50/60 Hz class
Output	3-phase variable-frequency AC
Output Current Class	710 A
Light-Duty Rating	Approx. 650 hp
Normal-Duty Rating	Approx. 600 hp
Heavy-Duty Rating	Approx. 450 hp
Frame Size	Frame 8
Cooling	Forced air
Motor Control	Adjustable-speed AC motor control
Feedback	Configuration dependent
Communication	Configuration dependent
Dynamic Braking	Configuration dependent
EMC / Filtering	Configuration dependent
Enclosure	Configuration dependent
Installation	Floor-mounted / cabinet-mounted
Approx. Height	2453 mm
Approx. Width	600 mm for basic drive section
Approx. Depth	600 or 800 mm depending on cabinet configuration
Approx. Weight	Approximately 623 kg for the basic Frame 8 cabinet configuration
Complete System Weight	Configuration dependent
Typical Application	Large industrial motors and machinery

The physical dimensions above represent the typical Frame 8 cabinet form factor.

The final dimensions and weight can change when additional wiring bays, input protection, disconnect equipment, filters, reactors, or other cabinet options are included.

For engineering planning, the basic Frame 8 cabinet can be considered approximately 2453 mm high × 600 mm wide × 600 or 800 mm deep, with a basic cabinet weight of approximately 623 kg.

A complete installation can be considerably heavier than the basic drive cabinet.

---

5. Electrical Rating

The 20G1G3D710LNDNNNNN is a 710 A-class high-power drive.

Its approximate 480 VAC duty ratings are:

Duty Rating	Approximate Horsepower	Current Class
Light Duty	650 hp	710 A
Normal Duty	600 hp	710 A
Heavy Duty	450 hp	710 A

The approximately 600 hp Normal Duty rating is one of the most important characteristics of this model.

It places the D710 above the D617 class and makes it suitable for large industrial motors requiring a higher current capacity.

The Heavy Duty rating is lower because heavy-duty operation imposes greater thermal and overload demands on the drive.

For applications involving frequent acceleration, high starting torque, high inertia, or repeated overload conditions, the Heavy Duty rating should be evaluated carefully.

---

6. Product Introduction

The PowerFlex 755 is a high-performance industrial AC drive platform developed for applications requiring large motor power and sophisticated control.

The 20G1G3D710LNDNNNNN represents a high-capacity Frame 8 configuration within the 480 VAC range.

Its primary purpose is to provide controlled variable-speed operation for large AC motors.

Instead of operating a motor continuously at a single fixed speed, the drive allows the motor to operate according to the requirements of the machine or process.

This approach is particularly useful in industrial environments where production conditions are constantly changing.

For example, a conveyor may require a slow speed during loading and a higher speed during transportation.

A large pump may require different flow rates at different times.

A ventilation fan may need maximum airflow during one operating condition but substantially less airflow during another.

A mixer may need a controlled startup followed by a stable operating speed.

The drive provides the electrical control platform required to manage these types of applications.

---

7. High-Power Industrial Architecture

The D710 is a large industrial drive and should be considered as part of a complete electrical installation.

Its 710 A-class output capability means that the associated electrical system can involve substantial input and output cabling, protection equipment, grounding requirements, heat dissipation, and mechanical support.

The drive is therefore much larger than compact wall-mounted or machine-mounted VFDs.

The Frame 8 construction is intended for industrial floor-mounted installations.

This type of installation is commonly used for large production systems, utility equipment, process machinery, material-handling systems, and other permanent industrial equipment.

---

8. Major Product Features

8.1 High Current Capacity

The most obvious characteristic of the D710 is its high output-current capability.

A 710 A-class drive is intended for very large motors.

This allows the drive to control motors that would be far beyond the practical range of compact general-purpose VFDs.

High current capacity is especially important when the motor has a large full-load current or when the machine requires substantial torque during operation.

---

8.2 Large Motor Power Capability

The D710 class provides approximately:

• 650 hp Light Duty
• 600 hp Normal Duty
• 450 hp Heavy Duty

This gives the drive a broad operating range for large industrial equipment.

The approximately 600 hp Normal Duty rating is especially useful for continuous industrial applications where the motor operates under a substantial but relatively predictable load.

---

8.3 Adjustable Speed

One of the main benefits of using a variable-frequency drive is the ability to control motor speed.

The motor does not have to operate continuously at its maximum rated speed.

The drive can adjust output frequency according to the process requirement.

This can improve machine flexibility and process control.

---

8.4 Controlled Acceleration

Starting a very large motor can place considerable stress on mechanical equipment.

A variable-frequency drive can provide a programmed acceleration profile.

Instead of immediately applying full-speed operation, the motor can accelerate progressively.

This can reduce sudden mechanical loading on:

• Shafts
• Couplings
• Gearboxes
• Belts
• Chains
• Conveyor structures
• Pump systems
• Fan assemblies

---

8.5 Controlled Deceleration

The drive can also manage motor deceleration.

This can provide smoother stopping behavior and reduce unnecessary mechanical shock.

The exact stopping method depends on the application and the selected braking configuration.

---

8.6 Torque Management

Large industrial machines frequently require controlled torque.

A conveyor may require high torque when starting with a heavy load.

A mixer may experience changing resistance as material characteristics change.

A pump may have different load characteristics depending on operating conditions.

The PowerFlex 755 platform provides motor-control functions suitable for applications where torque performance is important.

---

9. Product Applications

9.1 Large Conveyor Systems

Large conveyors are a strong application for the D710.

A heavy conveyor can have significant inertia and may be carrying substantial material when the motor starts.

Direct starting can create high mechanical stress.

With a properly configured variable-frequency drive, acceleration can be controlled.

The conveyor can gradually increase speed until the desired operating point is reached.

Speed can also be adjusted according to production requirements.

This is useful for:

• Bulk material handling
• Mining-related equipment
• Manufacturing conveyors
• Processing lines
• Large transfer systems
• Heavy-duty production equipment

---

10. Large Pump Systems

The D710 is suitable for large industrial pump applications when the motor current and duty requirements fall within the applicable rating.

Large pumps frequently do not need to operate at maximum speed continuously.

Variable-speed operation can allow the pump to respond to actual process demand.

Potential applications include:

• Industrial water circulation
• Process water systems
• Cooling systems
• Large fluid-transfer systems
• Industrial pumping stations
• Process circulation

Adjusting pump speed can also provide better process control.

For suitable centrifugal pump systems, reducing speed can significantly reduce power consumption compared with continuously operating the motor at full speed and controlling flow using purely mechanical methods.

---

11. Large Fans and Ventilation Systems

Large fans can require hundreds of horsepower.

The D710 is suitable for high-power ventilation and process-air applications where the motor current falls within the drive’s rating.

The drive can regulate fan speed according to the required airflow.

This can be useful in:

• Industrial ventilation
• Exhaust systems
• Cooling systems
• Process-air systems
• Large blower installations
• Manufacturing facilities

When airflow requirements change, adjustable-speed operation can prevent the motor from unnecessarily operating at maximum speed.

---

12. Large Blowers

Industrial blowers can have high continuous power requirements.

The D710 provides the current capacity required for many large blower installations.

Variable speed can be used to adjust air volume according to the process.

Controlled acceleration can also help reduce mechanical shock to the blower assembly.

---

13. Compressor Applications

Large compressors can place demanding requirements on motor-control systems.

The D710 can be considered for large compressor applications when the motor characteristics, compressor design, speed range, and load profile are compatible with the drive.

Typical considerations include:

• Starting torque
• Acceleration time
• Minimum operating speed
• Maximum operating speed
• Compressor load profile
• Motor cooling
• Required overload capability
• Braking requirements

The final drive rating should be selected from the actual motor current and compressor duty rather than horsepower alone.

---

14. Mixers and Agitators

Large mixers and agitators often experience variable loads.

The material inside the vessel can change in viscosity or density.

This can cause the required motor torque to change significantly during the process.

A high-power drive such as the D710 can provide controlled motor operation for large mixers where the current and torque requirements are within the drive’s applicable ratings.

Typical applications include large process mixers, industrial agitators, blending systems, and other rotating process equipment.

---

15. Material-Handling Equipment

The D710 is well suited to large material-handling machinery.

Examples include:

• Heavy conveyors
• Large feeders
• Transfer systems
• Bulk-material handling equipment
• Large lifting-related machinery
• Industrial transport systems

Controlled motor acceleration can help reduce stress on mechanical components.

The ability to regulate speed can also help coordinate several sections of a material-handling system.

---

16. Process Machinery

The PowerFlex 755 platform is particularly useful in industrial process machinery.

A process machine may require the motor to:

• Accelerate at a specific rate
• Operate at several speeds
• Maintain controlled torque
• Respond to changing load conditions
• Communicate status information
• Provide fault information
• Work with feedback equipment

The D710 provides the power capacity required for large machines with these types of requirements.

---

17. Main Advantages

17.1 Very High Power Capacity

The D710 is designed for very large industrial motors.

Its approximately 600 hp Normal Duty rating makes it suitable for applications that are beyond the practical range of many smaller drives.

---

17.2 High Current Output

The 710 A class provides substantial current capacity.

This is particularly useful for large motors with high full-load current.

It also provides a larger power platform for demanding industrial equipment.

---

17.3 Flexible Speed Control

The drive allows the motor to operate at different speeds.

This can improve production flexibility and process control.

Instead of selecting one fixed motor speed for every operating condition, the machine can use different speeds according to the process.

---

17.4 Smooth Starting

Large motors can cause significant electrical and mechanical disturbances when started directly.

Variable-frequency starting can provide a much more controlled acceleration profile.

This can help reduce mechanical shock and improve machine operating behavior.

---

17.5 Improved Process Control

Variable-speed motor operation can be used to directly influence process variables.

For example:

• Pump speed can influence flow.
• Fan speed can influence airflow.
• Conveyor speed can influence material throughput.
• Mixer speed can influence mixing intensity.
• Blower speed can influence air delivery.

This makes the drive an active part of the process-control strategy.

---

17.6 Advanced Industrial Control

The PowerFlex 755 platform provides a broad control architecture suitable for sophisticated industrial systems.

Depending on the exact configuration, functions can include speed control, torque control, feedback, communications, diagnostics, and application-specific control functions.

---

17.7 Integration with Automation

The drive can operate as part of a larger industrial control system.

This allows operating commands and information to be exchanged between the drive and other automation equipment.

Such integration can reduce the amount of separate hardwired monitoring and control equipment required.

---

17.8 Diagnostic Capability

Large industrial equipment benefits from detailed diagnostic information.

Drive faults, warnings, operating status, and other information can assist maintenance personnel in identifying abnormal conditions.

This can help reduce troubleshooting time and improve maintenance planning.

---

18. Dimensions and Weight

The D710 is a Frame 8 industrial drive.

For the typical IP20 / NEMA Type 1 MCC-style cabinet arrangement, the approximate physical dimensions are:

Mechanical Parameter	Approximate Value
Model	20G1G3D710LNDNNNNN
Frame	Frame 8
Height	2453 mm
Width	600 mm
Depth	600 or 800 mm
Basic Cabinet Weight	Approx. 623 kg
Cooling	Forced air
Mounting	Floor mounted
Installation Type	Industrial cabinet
Service Clearance	Additional space required
Complete System Weight	Configuration dependent

The approximately 623 kg value should be understood as an approximate basic cabinet weight.

If additional wiring bays or other cabinet sections are included, the total system weight can increase significantly.

For example, a complete drive-and-option-cabinet arrangement can occupy a much larger footprint than the basic 600 mm-wide drive section.

Therefore, final shipping weight, foundation requirements, lifting requirements, and transportation arrangements should be based on the actual configured assembly.

---

19. Installation Requirements

The 20G1G3D710LNDNNNNN is a large electrical system and requires careful installation planning.

The following areas are particularly important:

Incoming Power

The incoming electrical supply must be compatible with the drive’s voltage class and current requirements.

Appropriate protection equipment must be selected according to the complete installation.

Motor Wiring

Motor cables must be correctly sized for the output current and installation conditions.

Cable routing should also be planned to minimize unnecessary electromagnetic interference.

Grounding

Proper grounding and bonding are essential for safety and reliable operation.

Cooling

The drive produces substantial heat during operation.

Adequate airflow must therefore be maintained.

Cabinet Clearance

The equipment must have sufficient clearance for ventilation and service access.

Floor Loading

The complete installation can weigh hundreds of kilograms.

The supporting floor and mounting structure must therefore be capable of carrying the equipment safely.

---

20. Thermal Management

The D710 uses forced-air cooling.

Because the drive is capable of controlling very large motors, its power electronics can produce significant heat.

Good thermal management is therefore essential.

The installation should consider:

• Ambient temperature
• Airflow
• Cabinet ventilation
• Filter condition
• Fan condition
• Dust accumulation
• Heat generated by other cabinet components

A dirty or restricted airflow path can increase internal temperature.

For this reason, cooling-system inspection should be included in preventive maintenance.

---

21. Motor Selection Considerations

The correct motor-drive combination should be based on actual operating requirements.

Important motor parameters include:

Motor Parameter	Why It Matters
Rated Voltage	Must match the drive output range
Full-Load Current	Primary factor for drive sizing
Rated Frequency	Determines normal operating point
Rated Speed	Important for speed-control range
Power	Helps determine overall drive size
Power Factor	Influences current requirements
Efficiency	Influences input/output power
Starting Torque	Important for heavy-load starting
Overload Requirement	Determines duty selection
Duty Cycle	Determines thermal loading
Cooling Method	Important at low speed
Feedback Requirement	Determines control configuration

A 600 hp motor should not automatically be paired with the D710 simply because the horsepower values appear similar.

The actual motor full-load current and duty profile must also be evaluated.

---

22. Five Related Models in the PowerFlex 755 Family

The following models provide useful comparison points around the D710 power level.

Model	Voltage	Current Class	Light Duty	Normal Duty	Heavy Duty	Frame	Approx. Dimensions	Approx. Weight
20G1G3D430LNDNNNNN	480 VAC	430 A class	400 hp	350 hp	300 hp	8	Approx. 2453 × 600 × 600–800 mm	Approx. 500–600 kg
20G1G3D545LNDNNNNN	480 VAC	545 A class	500 hp	450 hp	350 hp	8	Approx. 2453 × 600 × 600–800 mm	Approx. 600–650 kg
20G1G3D617LNDNNNNN	480 VAC	617 A	600 hp	500 hp	400 hp	8	Approx. 2453 × 600 × 600–800 mm	Approx. 620–680 kg
20G1G3D710LNDNNNNN	480 VAC	710 A	650 hp	600 hp	450 hp	8	Approx. 2453 × 600 × 600–800 mm	Approx. 623–720 kg
20G1G3D740LNDNNNNN	480 VAC	740 A	700 hp	650 hp	500 hp	8	Approx. 2453 × 600 × 600–800 mm	Approx. 650–750 kg

These models form a useful progression for large 480 VAC motor applications.

The D430 is intended for a lower power level.

The D545 provides a step upward.

The D617 increases the available capacity again.

The D710 provides approximately 600 hp Normal Duty capacity.

The D740 moves into an even higher power range.

---

23. Five Additional Related High-Power Models

For very large motor systems, the following models provide additional reference points.

Model	Voltage	Current Class	Light Duty	Normal Duty	Heavy Duty	Frame	Approx. Dimensions	Approx. Weight
20G1G3D740LNDNNNNN	480 VAC	740 A	700 hp	650 hp	500 hp	8	Approx. 2453 × 600 × 600–800 mm	Approx. 650–750 kg
20G1G3D800LNDNNNNN	480 VAC	800 A class	800 hp	700 hp	600 hp	9	Approx. 2453 × 1200 × 600–800 mm	Approx. 1200–1300 kg
20G1G3D960LNDNNNNN	480 VAC	960 A class	900 hp	800 hp	700 hp	9	Approx. 2453 × 1200 × 600–800 mm	Approx. 1200–1400 kg
20G1G3D1K0LNDNNNNN	480 VAC	1000 A class	1000 hp	900 hp	750 hp	9	Approx. 2453 × 1200 × 600–800 mm	Approx. 1300–1500 kg
20G1G3D1K3LNDNNNNN	480 VAC	1300 A class	1250 hp	1100 hp	900 hp	9	Approx. 2453 × 1200 × 600–800 mm	Approx. 1400–1700 kg

The larger models should be considered for applications where the motor current exceeds the D710 range.

As power increases, the physical installation becomes increasingly important.

Large Frame 9 installations can require significantly more cabinet width, greater floor loading, larger cable arrangements, and more substantial lifting and transportation equipment.

---

24. D617 Versus D710

The D617 and D710 are closely related high-power PowerFlex 755 models.

Parameter	20G1G3D617LNDNNNNN	20G1G3D710LNDNNNNN
Voltage	480 VAC	480 VAC
Current	617 A	710 A
Light Duty	600 hp	650 hp
Normal Duty	500 hp	600 hp
Heavy Duty	400 hp	450 hp
Frame	8	8
Cooling	Forced air	Forced air
Typical Application	Large motors	Larger motors
Approx. Weight	620–680 kg	Approx. 623 kg basic cabinet
Power Position	High power	Higher power

The D710 provides additional current and horsepower capacity compared with the D617.

This makes it suitable when the motor current or operating requirements exceed the practical range of the D617.

---

25. D710 Versus D740

The D710 and D740 are also neighboring high-power ratings.

Parameter	20G1G3D710LNDNNNNN	20G1G3D740LNDNNNNN
Voltage	480 VAC	480 VAC
Current	710 A	740 A
Light Duty	650 hp	700 hp
Normal Duty	600 hp	650 hp
Heavy Duty	450 hp	500 hp
Frame	8	8
Cooling	Forced air	Forced air
Application	Large industrial motors	Larger industrial motors
Installation	Floor-mounted	Floor-mounted

The D740 offers a further increase in power capability.

The D710 is therefore useful when approximately 600 hp Normal Duty capacity is required, while the D740 provides additional margin for larger motor applications.

---

26. Five Representative Allen-Bradley Models

The following five models represent other commonly encountered products from the same brand across different power levels and product families.

They are useful as comparison models rather than a formal sales ranking.

Model	Series	Voltage Class	Current Class	Approx. Power Range	Approx. Dimensions	Approx. Weight
25B-D010N114	PowerFlex 525	480 VAC	10 A class	Approx. 4–7.5 kW	Approx. 180 × 100 × 200 mm	Approx. 2–3 kg
25B-D017N114	PowerFlex 525	480 VAC	17 A class	Approx. 7.5–11 kW	Approx. 180 × 100 × 200 mm	Approx. 3 kg
25B-D024N114	PowerFlex 525	480 VAC	24 A class	Approx. 11–15 kW	Approx. 180 × 100 × 200 mm	Approx. 3–4 kg
25A-D017N114	PowerFlex 523	480 VAC	17 A class	Approx. 7.5–11 kW	Approx. 180 × 100 × 200 mm	Approx. 2–3 kg
20F1ANC030JA0NNNNN	PowerFlex 753	480 VAC	30 A class	Approx. 15–22 kW	Approx. 300 × 200 × 250 mm	Approx. 15–20 kg

These models are dramatically smaller than the D710.

The PowerFlex 525 and PowerFlex 523 are better suited to compact machines and smaller motors.

The PowerFlex 753 example occupies a middle range and is more appropriate for industrial machinery requiring greater control capability than a compact drive.

The D710, in contrast, is designed for very large industrial motors and substantial electrical installations.

---

27. Comparison of Product Classes

Product Class	Typical Application	Relative Size	Relative Power
PowerFlex 523	Compact machines	Small	Low
PowerFlex 525	General industrial machines	Small	Low to medium
PowerFlex 753	Industrial machinery	Medium	Medium
PowerFlex 755	Large industrial machinery	Large	High
20G1G3D710LNDNNNNN	Very large industrial machinery	Very large	Very high

This difference is important when choosing equipment.

A compact drive should normally be selected for a compact motor because it reduces cabinet space, installation complexity, and equipment cost.

A high-power Frame 8 drive is justified when the motor and machine requirements actually demand that level of power.

---

28. Energy Management Benefits

The D710 can provide an important advantage in applications where motor speed can be varied according to process demand.

This is particularly relevant to centrifugal pumps and fans.

For example, a large fan does not necessarily need maximum airflow at all times.

Operating the motor at a lower speed can reduce the power required by the machine.

Likewise, a pump can be operated at a speed that more closely matches the required flow.

The actual energy savings depend on the application, operating schedule, system design, pump or fan characteristics, motor efficiency, and other factors.

The drive itself does not automatically guarantee a particular energy saving.

Its value comes from allowing the motor to operate at a speed appropriate to the actual process requirement.

---

29. Reliability and Maintenance

Large industrial drives should be incorporated into a preventive maintenance program.

Important inspection areas include:

• Cooling fans
• Air passages
• Cabinet ventilation
• Electrical connections
• Grounding
• Motor cables
• Control wiring
• Communication connections
• Fault history
• Warning history
• Operating temperature
• Cabinet cleanliness

The cooling system is particularly important.

High-power semiconductor devices generate heat during normal operation.

Maintaining proper airflow can help keep the drive operating within its intended thermal range.

---

30. Troubleshooting Advantages

The PowerFlex 755 architecture provides diagnostic information that can be useful when troubleshooting industrial machinery.

A maintenance technician can investigate conditions such as:

• Drive faults
• Overcurrent conditions
• Overvoltage conditions
• Motor-related problems
• Communication problems
• Thermal issues
• Feedback-related problems
• Control-system interruptions

This can help maintenance personnel distinguish between a problem originating in the drive, motor, mechanical load, or control system.

---

31. Mechanical Installation

The D710 is a large floor-mounted industrial unit.

The installation area should be planned before the equipment arrives.

Important considerations include:

• Floor strength
• Cabinet height
• Cabinet width
• Cabinet depth
• Door access
• Maintenance access
• Cable entry
• Cable exit
• Ventilation
• Lifting equipment
• Transportation route
• Service clearance

At approximately 623 kg for the basic Frame 8 cabinet arrangement, the equipment cannot be treated like a small panel-mounted inverter.

The building structure, floor, lifting equipment, and installation team should all be prepared for the physical size of the equipment.

---

32. Typical System Structure

A large motor system using the 20G1G3D710LNDNNNNN can be represented conceptually as:

Incoming AC Power → Protection Equipment → PowerFlex 755 → Motor → Mechanical Load

The control system may operate in parallel:

Industrial Controller → Drive Communication / Control Interface → PowerFlex 755

Additional feedback devices can be included when the application requires more precise speed or position control.

This arrangement allows the drive to become part of the overall machine-control architecture.

---

33. Application Selection Guide

Requirement	D710 Suitability
Very large motor	Excellent
Approximately 600 hp Normal Duty	Highly suitable
Large pump	Excellent
Large fan	Excellent
Large blower	Excellent
Heavy conveyor	Excellent
Large mixer	Excellent
Large compressor	Suitable, application dependent
Process machinery	Excellent
High-current motor	Excellent
Small motor	Generally oversized
Small machine	Generally oversized
Compact cabinet requirement	Not ideal
High-power industrial system	Excellent

---

34. Important Selection Considerations

Although the D710 is a very high-capacity drive, the largest available drive is not automatically the best choice.

Oversizing can result in unnecessary equipment cost and larger physical requirements.

Undersizing can result in inadequate current capacity, thermal limitations, or insufficient overload capability.

The best approach is to match the drive to the actual application.

The following factors should be evaluated:

1. Motor full-load current.
2. Motor voltage.
3. Required horsepower.
4. Duty cycle.
5. Starting torque.
6. Acceleration time.
7. Deceleration time.
8. Maximum and minimum operating speed.
9. Overload requirements.
10. Ambient temperature.
11. Installation altitude.
12. Motor cable length.
13. Required feedback.
14. Required communications.
15. Braking requirements.
16. Cabinet and enclosure requirements.
17. Environmental conditions.
18. Maintenance access.

This approach provides a much more reliable basis for drive selection than horsepower alone.

---

35. Product Advantages in Practical Industrial Use

The D710 provides several practical advantages when used correctly.

For large conveyors, controlled acceleration can reduce mechanical shock.

For pumps, adjustable speed can provide better flow control.

For fans, speed control can match airflow to process demand.

For mixers, torque control can help accommodate changing material loads.

For process equipment, communication and diagnostic functions can simplify integration with the automation system.

For maintenance teams, drive status and diagnostic information can help identify problems more efficiently.

For large industrial installations, the high current capacity allows a single drive platform to control motors that would otherwise require much larger or more complicated arrangements.

---

36. Key Specification Summary

Specification	20G1G3D710LNDNNNNN
Brand	Allen-Bradley
Product Family	PowerFlex
Series	PowerFlex 755
Product Type	High-Power AC Variable Frequency Drive
Voltage Class	480 VAC
Input	3-phase AC
Current Rating Class	710 A
Light-Duty Rating	Approx. 650 hp
Normal-Duty Rating	Approx. 600 hp
Heavy-Duty Rating	Approx. 450 hp
Frame	8
Cooling	Forced air
Installation	Floor-mounted industrial cabinet
Approx. Height	2453 mm
Approx. Width	600 mm
Approx. Depth	600 or 800 mm
Approx. Basic Weight	623 kg
Complete Assembly Weight	Configuration dependent
Output	Variable-frequency 3-phase AC
Feedback	Configuration dependent
Communication	Configuration dependent
Dynamic Braking	Configuration dependent
Typical Applications	Pumps, fans, conveyors, blowers, compressors, mixers
Application Level	High-power industrial

---

37. Final Product Description

The Allen-Bradley 20G1G3D710LNDNNNNN is a high-power PowerFlex 755 AC variable frequency drive designed for large industrial motor applications.

Its 480 VAC three-phase architecture and 710 A-class current rating place it in the upper portion of the Frame 8 PowerFlex 755 range.

With approximately 650 hp Light Duty, 600 hp Normal Duty, and 450 hp Heavy Duty capability, it can be applied to a wide variety of large industrial machines.

The model is particularly suitable for large pumps, industrial fans, blowers, heavy conveyors, mixers, compressors, material-handling systems, and large process machines.

Its principal advantage is the combination of very high electrical capacity with the flexible control architecture of the PowerFlex 755 platform.

The drive can provide adjustable-speed operation, controlled acceleration and deceleration, torque-oriented control functions, communication capability, feedback options, and diagnostic information depending on the selected configuration.

The D710 is physically much larger than compact variable-frequency drives.

Its approximately 2453 mm height, 600 mm basic width, 600 or 800 mm depth, and approximately 623 kg basic cabinet weight demonstrate the scale of the equipment.

For that reason, mechanical installation, ventilation, lifting, transportation, cable routing, floor loading, and service clearance must all be considered as part of the engineering process.

Within the PowerFlex 755 family, the D710 occupies an important position between the D617 and larger D740 and higher-current configurations.

The D617 can be considered when approximately 500 hp Normal Duty capacity is sufficient, while the D740 and larger models provide additional capacity when the motor current or horsepower requirement increases.

For large industrial applications where a motor needs high-current variable-speed control and the machine requires more than a basic VFD can provide, the 20G1G3D710LNDNNNNN is a high-capacity PowerFlex 755 solution designed for demanding continuous-duty industrial environments.