Company Information
E-mail		[email protected]
Mobile		+8615980777398
Whatsapp		+8615980777398
WeChat		15980777398

20G1ABD430AN2NNNNN — PowerFlex 755 Air-Cooled AC Drive

1. Product Overview

The 20G1ABD430AN2NNNNN is a high-power industrial AC variable-frequency drive belonging to the PowerFlex 755 series and the broader PowerFlex 750-Series product family.

It is designed for large three-phase motor applications where precise speed regulation, controlled acceleration and deceleration, high-current motor control, industrial networking and centralized automation are required.

The drive is rated for a 480 VAC, three-phase input and provides a 430 A output-current rating. Its published Normal Duty rating is approximately 350 HP / 260 kW, making it suitable for substantial industrial motors and large mechanical loads.

This particular configuration uses an Enhanced LCD Full Numeric HIM, providing a practical local interface for commissioning, parameter adjustment, diagnostics and maintenance.

The drive uses an air-cooled Frame 8 construction and an approximately 600 mm deep MCC-style physical arrangement. It is intended for substantial industrial installations rather than compact machine control cabinets.

The model uses AC input with precharge, has no DC input terminals, incorporates EMC filtering, has the CM jumper removed, and does not include dynamic braking in the standard catalog configuration.

---

2. Brand and Product Series

Classification	Specification
Brand	Allen-Bradley
Product Family	PowerFlex 750-Series
Product Series	PowerFlex 755
Product Type	Air-Cooled AC Packaged Drive
Drive Category	Industrial Variable-Frequency Drive
Application Class	Large Industrial Motor Control
Model	20G1ABD430AN2NNNNN
Voltage Class	480 VAC
Input Phase	3 Phase
Output Current	430 A
Frame	Frame 8
Cooling	Forced-Air / Air Cooled
Communication	Embedded EtherNet/IP
Operator Interface	Enhanced LCD Full Numeric HIM
Enclosure	IP20 / NEMA Type 1
Cabinet Style	600 mm Deep MCC Style

The PowerFlex 755 series is intended for applications that need more flexibility and control capability than a basic general-purpose variable-frequency drive.

Its architecture is suitable for large industrial machines, process systems and plant-wide automation where the drive needs to exchange operating information with a PLC, HMI, SCADA system or industrial network.

---

3. Main Technical Parameters

Parameter	Specification
Model	20G1ABD430AN2NNNNN
Brand	Allen-Bradley
Series	PowerFlex 755
Product Family	PowerFlex 750-Series
Product Type	AC Packaged Drive
Input Voltage	480 VAC
Input Phase	3 Phase
Input Voltage Class	480 V
DC Bus Voltage Class	650 VDC
Output Current	430 A
Normal Duty Rating	350 HP
Normal Duty Power	Approximately 260 kW
Heavy Duty Rating	300 HP
Heavy Duty Power	Approximately 224 kW
Light Duty Rating	Approximately 400 HP class
Frame Size	Frame 8
Cooling	Forced Air
Input Type	AC Input with Precharge
DC Input Terminals	None
Dynamic Braking	None
Filtering	EMC Filter
CM Jumper	Removed
Operator Interface	Enhanced LCD Full Numeric HIM
HIM Type	Local / Handheld Interface
Communication	Embedded EtherNet/IP
Enclosure	IP20 / NEMA Type 1
Cabinet Depth	600 mm MCC Style class
Approx. Width	610 mm / 24 in class
Approx. Depth	465 mm / 18.3 in class
Approx. Height	Large Frame 8 cabinet height
Approx. Dimensions	Approximately 2100 × 610 × 465 mm class
Approx. Weight	Approximately 620–635 kg class
Installation	Industrial Cabinet / MCC
Primary Application	Large AC Motor Control

The physical dimensions should be treated as an engineering planning value rather than a substitute for the final mechanical drawing.

For this large Frame 8 configuration, the approximate width is around 610 mm, while the depth is around 465 mm for the drive assembly itself. The complete installed arrangement can require additional space for cable routing, ventilation and service access.

---

4. Electrical Ratings

Electrical Parameter	Specification
Model	20G1ABD430AN2NNNNN
Input Voltage	480 VAC
Input Phase	Three Phase
Output Current	430 A
DC Bus Class	650 VDC
Normal Duty	350 HP
Normal Duty Metric Equivalent	Approximately 260 kW
Heavy Duty	300 HP
Heavy Duty Metric Equivalent	Approximately 224 kW
Light Duty	Approximately 400 HP class
Input Frequency	50/60 Hz class
Input Type	AC Input with Precharge
DC Input Terminals	None
Dynamic Braking	None
Cooling	Forced Air
EMC Filtering	Yes
CM Jumper	Removed
Motor Control	Variable Frequency
Communication	EtherNet/IP
Frame	8
Enclosure	IP20 / NEMA Type 1

The 430 A output rating is the most important sizing parameter for the drive.

For a real installation, the motor’s full-load current should be compared with the drive’s current rating. Motor horsepower alone is not sufficient because different motors and load profiles can require different amounts of current.

---

5. Normal Duty and Heavy Duty Capability

The model is particularly suitable for large industrial applications because it provides different power ratings according to the required duty level.

Duty	Rating	Approx. Metric Equivalent	Typical Application
Light Duty	~400 HP class	~298 kW	Variable-torque applications
Normal Duty	350 HP	~260 kW	General industrial loads
Heavy Duty	300 HP	~224 kW	High-torque / demanding loads

The distinction between Normal Duty and Heavy Duty is important.

A conveyor with a high starting load, for example, can require more current during acceleration than a centrifugal fan of the same nominal horsepower.

For this reason, the 430 A current rating and application duty should be considered together.

---

6. Product Configuration

The catalog number identifies a particular combination of electrical and mechanical characteristics.

Configuration Item	Configuration
Model	20G1ABD430AN2NNNNN
Product Series	PowerFlex 755
Input Voltage	480 VAC
Phase	3 Phase
Current Rating	430 A
Frame	Frame 8
Cooling	Air Cooled
Input	AC with Precharge
DC Terminals	None
Filtering	EMC Filter
CM Jumper	Removed
Dynamic Braking	None
Enclosure	IP20 / NEMA Type 1
HIM	Enhanced LCD Full Numeric
HIM Arrangement	Local / Handheld
Communication	EtherNet/IP
Installation	Large Industrial Cabinet

The AN2 configuration is especially useful when a local operator interface is desired without using a permanently door-mounted HIM arrangement.

This makes it practical for commissioning and maintenance while still allowing the drive to operate as part of a centralized automation network.

---

7. Enhanced LCD Full Numeric HIM

One of the defining features of the 20G1ABD430AN2NNNNN configuration is its Enhanced LCD Full Numeric HIM.

The HIM provides technicians with direct access to the drive.

Typical uses include:

• Drive commissioning
• Parameter setup
• Motor data entry
• Speed reference adjustment
• Local start/stop testing
• Fault review
• Alarm monitoring
• Drive status checking
• Diagnostic work
• Maintenance

This is especially useful during machine commissioning.

A technician can work directly with the drive before the entire PLC or SCADA system has been fully commissioned.

---

8. Communication and Network Integration

The drive is designed for integration into industrial automation systems.

Communication Function	Capability
Model	20G1ABD430AN2NNNNN
EtherNet/IP	Integrated / Supported
PLC Communication	Supported
HMI Communication	Supported
SCADA Communication	Supported
Remote Start/Stop	Supported
Speed Command	Supported
Frequency Reference	Supported
Drive Status	Available
Fault Information	Available
Alarm Information	Available
Parameter Access	Available
Diagnostic Information	Available
Remote Monitoring	Supported

A typical installation can use a structure such as:

PLC → EtherNet/IP → PowerFlex 755 → Motor

The local HIM can then be used by maintenance personnel while normal production control remains under the plant automation system.

---

9. Product Introduction

The 20G1ABD430AN2NNNNN is intended for applications where a large motor must operate at variable speed instead of simply being switched on and off.

A variable-frequency drive can control motor speed by regulating the electrical frequency and voltage supplied to the motor.

This is useful when the mechanical process does not need to operate continuously at full speed.

Examples include pumps that need different flow rates, fans that need different airflow levels and conveyors that need different production speeds.

For large industrial systems, the drive also provides a convenient connection between the motor and the plant’s automation system.

---

10. Product Applications

10.1 Large Pumps

Large industrial pumps are one of the most common applications for high-power AC drives.

The drive can adjust motor speed according to process demand.

Typical applications include:

• Water circulation
• Industrial water supply
• Cooling-water systems
• Wastewater treatment
• Process-water systems
• Water treatment
• Large pumping stations

Variable-speed control can reduce unnecessary operation at full speed and can provide smoother control of the pumping process.

---

10.2 Large Fans

Large fans can require several hundred horsepower.

The drive allows fan speed to be adjusted according to actual airflow requirements.

Typical applications include:

• Industrial ventilation
• Furnace ventilation
• Process exhaust
• Cooling systems
• Dust collection
• Large air-handling systems

---

10.3 Industrial Blowers

Blowers used in industrial processes can also benefit from variable-speed operation.

The drive can regulate blower speed according to process pressure or airflow requirements.

Applications include:

• Process-air systems
• Wastewater aeration
• Industrial ventilation
• Combustion air
• Material processing
• Pneumatic conveying

---

10.4 Conveyors

Large conveyors can place considerable mechanical demand on their motors.

The drive provides controlled acceleration and deceleration rather than connecting the motor directly to the power supply.

This is useful for:

• Mining conveyors
• Cement conveyors
• Aggregate systems
• Steel plants
• Bulk material handling
• Port facilities
• Production lines

---

10.5 Compressors

Large compressors can require high-power motors and controlled acceleration.

The drive can regulate motor speed and communicate operating information to the plant automation system.

---

10.6 Mixers

Industrial mixers often experience changing mechanical loads.

Variable-speed control allows the motor to operate at different speeds depending on the material and process stage.

---

10.7 Large Production Machinery

The drive can be used for:

• Processing machinery
• Large machine tools
• Material-handling equipment
• Industrial production equipment
• Manufacturing machinery
• Mechanical process systems

---

11. Application Suitability

Application	Suitability	Main Reason
Large Pump	Excellent	High-current variable-speed control
Cooling Pump	Excellent	Large continuous motor load
Large Fan	Excellent	Adjustable airflow
Industrial Blower	Excellent	Variable-speed process control
Conveyor	Excellent	Controlled acceleration
Mining Conveyor	Excellent	High motor capacity
Compressor	Good	High-power motor control
Mixer	Good	Speed and torque control
Process Machinery	Excellent	Flexible automation integration
Small Pump	Oversized	Lower-power drive generally preferred
Small Fan	Oversized	Lower-power drive generally preferred
Small Machine	Oversized	Excessive current capacity

---

12. Main Product Advantages

12.1 High 430 A Current Rating

The 430 A output capability allows the drive to control large industrial motors.

This is particularly useful where the motor requires high current during normal operation or acceleration.

---

12.2 350 HP Normal Duty Capacity

The 350 HP Normal Duty rating makes the drive suitable for large continuous industrial loads.

This is an appropriate range for many large pumps, fans, conveyors and process machines.

---

12.3 300 HP Heavy Duty Capacity

The Heavy Duty rating is useful for applications that demand greater torque and overload capability.

Typical examples include:

• Conveyors
• Mixers
• High-inertia machinery
• Material-handling systems
• Process equipment

---

12.4 Local HIM

The Enhanced LCD Full Numeric HIM provides a direct local interface.

This is a practical advantage during:

• Commissioning
• Troubleshooting
• Parameter setup
• Maintenance
• Motor testing

---

12.5 EtherNet/IP Integration

The embedded industrial networking capability allows the drive to communicate with the automation system.

This makes centralized monitoring and control much easier.

---

12.6 Flexible Control Architecture

The PowerFlex 755 platform supports different motor-control approaches.

This allows engineers to select a control method appropriate for the motor and mechanical load.

---

12.7 Large Industrial Construction

The Frame 8 construction is designed for high-power industrial installations.

The drive is physically substantial and can be integrated into MCC-style equipment rooms and large electrical cabinets.

---

13. Cooling System

The drive uses forced-air cooling.

At approximately 430 A, the power electronics generate considerable heat.

The installation should therefore provide adequate ventilation and should avoid obstructing the cooling airflow.

Cooling Item	Requirement
Model	20G1ABD430AN2NNNNN
Cooling Type	Forced Air
Airflow	Must remain unobstructed
Fan Condition	Should be inspected periodically
Cabinet Ventilation	Required
Dust Control	Important
Ambient Temperature	Must remain within specified operating limits
Heat Recirculation	Should be avoided
Fan Noise	Check for abnormal changes
Thermal Condition	Monitor during maintenance

A clean and properly ventilated electrical environment is particularly important for high-power air-cooled drives.

---

14. Mechanical Dimensions and Weight

The physical size of this drive should be considered when planning the electrical room.

Mechanical Parameter	Specification
Model	20G1ABD430AN2NNNNN
Frame	Frame 8
Enclosure	IP20 / NEMA Type 1
Cabinet Style	600 mm Deep MCC Style
Approx. Width	610 mm
Approx. Depth	465 mm
Approx. Height	Large Frame 8 cabinet height
Approx. Dimensions	Approximately 2100 × 610 × 465 mm
Approx. Weight	Approximately 620–635 kg
Cooling	Forced Air
Mounting	Floor / Cabinet
Service Access	Front Access
HIM	Local / Handheld

The exact dimensions can vary according to the physical configuration and installation arrangement.

For equipment layout, it is sensible to allow additional space beyond the nominal enclosure dimensions for:

• Power cables
• Control cables
• Ethernet connections
• Cooling airflow
• Door movement
• Service work
• Lifting
• Maintenance

The approximate 620–635 kg weight class also means that transportation and lifting should be planned in advance.

---

15. Installation Requirements

Installation Factor	Recommendation
Floor Strength	Must support approximately 620–635 kg
Mounting	Secure industrial mounting
Orientation	Upright
Ventilation	Adequate
Cooling Air	Keep unobstructed
Service Access	Provide sufficient front access
Cable Space	Allow high-current cable routing
Grounding	Proper industrial grounding
Environment	Clean and controlled industrial environment
Dust	Minimize excessive contamination
Moisture	Avoid unsuitable moisture exposure
Temperature	Maintain within operating limits
Lifting	Use suitable heavy equipment

Because of the high output current, power-cable routing is also important.

The installation should be designed to minimize unnecessary cable heating and provide adequate clearance around electrical connections.

---

16. Maintenance Recommendations

Maintenance Area	Inspection
Cooling Fans	Check operation and abnormal noise
Airflow	Ensure unobstructed
Power Terminals	Inspect for overheating
Cable Connections	Check condition
Grounding	Inspect periodically
Control Wiring	Check connections
Ethernet	Check communication stability
HIM	Check display and keypad
Fault History	Review recurring faults
Cabinet Interior	Check contamination
Ventilation	Check airflow
Motor Cables	Inspect insulation and termination
Mechanical Equipment	Check abnormal vibration or load

High-power drive maintenance should not focus only on the drive itself.

The motor, gearbox, coupling, mechanical load and electrical supply should also be considered when investigating abnormal operation.

---

17. Five Recommended Models from the Same Series or Related Range

The following models are useful comparisons within the PowerFlex 755 high-power range.

Model	Series	Input Voltage	Current	Approx. Duty Range	HIM	Frame	Approx. Dimensions	Approx. Weight kg
20G1ABD430AN0NNNNN	PowerFlex 755	480 VAC	430 A	400/350/300 HP class	None	Frame 8	~2100 × 610 × 465 mm class	~620–635
20G1ABD430AN4NNNNN	PowerFlex 755	480 VAC	430 A	400/350/300 HP class	Door Mounted	Frame 8	~2100 × 610 × 465 mm class	~620–635
20G1ABD485AN2NNNNN	PowerFlex 755	480 VAC	485 A	Higher than 430 A class	Enhanced LCD	Frame 8	Large Frame	Configuration dependent
20G1ABD545AN2NNNNN	PowerFlex 755	480 VAC	545 A	Higher Power	Enhanced LCD	Frame 8	Large Frame	Configuration dependent
20G1ABD617AN2NNNNN	PowerFlex 755	480 VAC	617 A	Higher Power	Enhanced LCD	Frame 8	Large Frame	Configuration dependent

These alternatives provide several practical directions.

The 20G1ABD430AN0NNNNN is the closest configuration without a local HIM.

The 20G1ABD430AN4NNNNN is useful when a permanent door-mounted operator interface is preferred.

The higher-current configurations are appropriate when the motor requires more current than the 430 A model can provide.

---

18. Detailed Related-Model Comparison

Parameter	20G1ABD430AN0NNNNN	20G1ABD430AN4NNNNN	20G1ABD485AN2NNNNN	20G1ABD545AN2NNNNN	20G1ABD617AN2NNNNN
Product Series	PowerFlex 755	PowerFlex 755	PowerFlex 755	PowerFlex 755	PowerFlex 755
Input	480 VAC	480 VAC	480 VAC	480 VAC	480 VAC
Phase	3 Phase	3 Phase	3 Phase	3 Phase	3 Phase
Current	430 A	430 A	485 A	545 A	617 A
Frame	8	8	8	8	8
Cooling	Air Cooled	Air Cooled	Air Cooled	Air Cooled	Air Cooled
EtherNet/IP	Yes	Yes	Yes	Yes	Yes
HIM	None	Door Mounted	Enhanced LCD	Enhanced LCD	Enhanced LCD
Dynamic Braking	None	None	Configuration dependent	Configuration dependent	Configuration dependent
Enclosure	IP20 / Type 1	IP20 / Type 1	IP20 / Type 1 class	IP20 / Type 1 class	IP20 / Type 1 class
Approx. Dimensions	~2100 × 610 × 465 mm	Similar	Large Frame	Large Frame	Large Frame
Approx. Weight kg	~620–635	~620–635	Configuration dependent	Configuration dependent	Configuration dependent
Main Advantage	Centralized control	Door access	Higher current	Higher current	Highest current of these choices

---

19. Five Popular Models from the Same Brand

For a broader selection, the following models represent different power levels and product families.

Model	Product Family	Voltage Class	Current / Power Class	Typical Application	Approx. Dimensions	Approx. Weight kg
25B-D030N114	PowerFlex 525	480 V class	~30 A class	General Machinery	Compact	Configuration dependent
25C-D030N114	PowerFlex 527	480 V class	~30 A class	Automated Machinery	Compact	Configuration dependent
20G1ABC302JN2NNNNN	PowerFlex 755	400 V class	~302 A class	Pumps / Fans / Conveyors	Large Frame	Configuration dependent
20G1ABC460JN2NNNNN	PowerFlex 755	400 V class	~460 A class	Large Industrial Machinery	Large Frame	Configuration dependent
20G1ABC650JN2NNNNN	PowerFlex 755	400 V class	~650 A class	Heavy Industrial Motors	Large Frame	Configuration dependent

The first two models are intended for considerably smaller motor applications.

The PowerFlex 755 alternatives are more appropriate when the application requires the higher current and power capability associated with large industrial motors.

---

20. Same-Brand Model Comparison

Parameter	25B-D030N114	25C-D030N114	20G1ABC302JN2NNNNN	20G1ABC460JN2NNNNN	20G1ABC650JN2NNNNN
Product Family	PowerFlex 525	PowerFlex 527	PowerFlex 755	PowerFlex 755	PowerFlex 755
Voltage Class	480 V	480 V	400 V	400 V	400 V
Phase	3 Phase	3 Phase	3 Phase	3 Phase	3 Phase
Current Class	~30 A	~30 A	~302 A	~460 A	~650 A
Application Scale	Small / Medium	Small / Medium	Large	Large	Very Large
Cooling	Air Cooled	Air Cooled	Air Cooled	Air Cooled	Air Cooled
Network	Ethernet / EtherNet/IP class	EtherNet/IP	EtherNet/IP	EtherNet/IP	EtherNet/IP
Typical Use	General Machinery	Automated Machinery	Pumps / Fans	Large Industrial Machinery	Heavy Industrial Machinery
Frame	Compact	Compact	Large	Large	Large
Approx. Dimensions	Compact	Compact	Large Frame	Large Frame	Large Frame
Approx. Weight kg	Configuration dependent	Configuration dependent	Configuration dependent	Configuration dependent	Configuration dependent

---

21. 430 A Configuration Comparison

The following three models are particularly useful when choosing the appropriate operator-interface configuration.

Parameter	20G1ABD430AN0NNNNN	20G1ABD430AN2NNNNN	20G1ABD430AN4NNNNN
Series	PowerFlex 755	PowerFlex 755	PowerFlex 755
Input Voltage	480 VAC	480 VAC	480 VAC
Phase	3 Phase	3 Phase	3 Phase
Output Current	430 A	430 A	430 A
Normal Duty	350 HP	350 HP	350 HP
Heavy Duty	300 HP	300 HP	300 HP
Frame	Frame 8	Frame 8	Frame 8
Cooling	Air Cooled	Air Cooled	Air Cooled
Enclosure	IP20 / Type 1	IP20 / Type 1	IP20 / Type 1
EtherNet/IP	Yes	Yes	Yes
HIM	None	Enhanced LCD Full Numeric	Enhanced LCD Full Numeric
HIM Location	—	Local / Handheld	Door Mounted
Dynamic Braking	None	None	None
Filtering	EMC Filter	EMC Filter	EMC Filter
CM Jumper	Removed	Removed	Removed
Approx. Dimensions	~2100 × 610 × 465 mm	~2100 × 610 × 465 mm	~2100 × 610 × 465 mm
Approx. Weight kg	~620–635	~620–635	~620–635
Main Advantage	Centralized operation	Local service access	Permanent front-panel access

For applications where technicians frequently need direct access to the drive, the AN2 configuration is more convenient than the AN0 version.

The AN4 version is more appropriate when a permanent door-mounted interface is preferred.

---

22. Why the AN2 Configuration Is Useful

The AN2 configuration is a practical middle ground between a completely centralized drive and a permanently door-mounted operator interface.

The plant can use EtherNet/IP for normal control while technicians retain access to a dedicated local HIM.

This is useful during machine commissioning because the drive can be tested before the complete automation program is finished.

It is also useful during maintenance because technicians can inspect parameters and faults directly at the drive.

For a production line, this arrangement can simplify troubleshooting.

---

23. Advantages in Large Automation Systems

A large production facility may contain dozens of motors ranging from small auxiliary motors to several-hundred-horsepower process motors.

The PowerFlex 755 platform provides a common drive architecture for many of these larger motor applications.

The 20G1ABD430AN2NNNNN can therefore fit into a larger architecture where:

• PLCs control production sequences.
• EtherNet/IP communicates with drives.
• HMIs display operating information.
• SCADA systems collect production data.
• Local HIMs are used for maintenance.
• Drives control individual motors.

This architecture provides a clear separation between normal operation and maintenance access.

---

24. Typical Control Structure

A typical large industrial motor system can be arranged as follows:

Plant Control System

↓

EtherNet/IP Network

↓

PowerFlex 755 Drive

↓

480 VAC Three-Phase Motor

↓

Pump / Fan / Conveyor / Compressor / Process Machine

The local HIM remains available for commissioning and service.

This arrangement is particularly useful when the motor is located in a remote mechanical area but the plant control room is responsible for normal operation.

---

25. Advantages for Maintenance

The local Enhanced LCD Full Numeric HIM can reduce the time needed for troubleshooting.

A technician can inspect the drive without immediately connecting an external computer or relying on the control-room HMI.

Useful maintenance functions include:

• Parameter inspection
• Fault review
• Alarm review
• Local operating checks
• Motor setup
• Drive status inspection
• Commissioning adjustments

This is particularly valuable for large production systems where downtime can be expensive.

---

26. Advantages for Pumps and Fans

For centrifugal pumps and fans, motor speed has a strong relationship with process output.

Reducing motor speed can significantly reduce the mechanical demand compared with simply operating continuously at full speed.

The drive therefore provides a practical method of matching motor operation to actual process requirements.

This can be useful for:

• Flow control
• Pressure control
• Airflow control
• Cooling control
• Process optimization

---

27. Advantages for Conveyors

For conveyors, controlled acceleration can reduce mechanical shock.

Instead of applying full speed immediately, the drive can accelerate the motor according to a configured ramp.

This can help reduce stress on:

• Gearboxes
• Couplings
• Conveyor belts
• Shafts
• Mechanical joints
• Material on the conveyor

The ability to control speed also allows production rates to be adjusted according to process requirements.

---

28. Advantages for Process Machinery

Industrial process machinery often requires different speeds during different stages of operation.

The drive can allow a machine to use:

• Low-speed operation during setup
• Medium-speed operation during processing
• Higher-speed operation during production
• Controlled deceleration during shutdown

This provides more flexibility than a simple fixed-speed motor starter.

---

29. Installation and Engineering Checklist

Engineering Item	Consideration
Motor Voltage	Confirm 480 V class compatibility
Motor Current	Must be compatible with 430 A drive capacity
Motor Power	Check duty rating
Load Type	Determine variable torque or constant torque
Overload	Determine required overload capability
Acceleration	Evaluate motor and mechanical inertia
Deceleration	Check whether braking is required
Braking	This configuration has no dynamic braking
Network	Confirm EtherNet/IP architecture
HIM	Local Enhanced LCD interface included
Cooling	Provide sufficient airflow
Cabinet	Verify physical dimensions
Floor	Verify load capacity
Cable	Size power cables appropriately
Grounding	Confirm grounding arrangement
Environment	Check temperature, dust and moisture
Maintenance	Provide service access

---

30. Important Point About Dynamic Braking

The standard 20G1ABD430AN2NNNNN configuration does not include dynamic braking.

This is important when the driven machine has substantial inertia or requires rapid deceleration.

Applications such as high-inertia conveyors, certain hoisting systems and machines requiring frequent rapid stopping may need a braking solution.

The drive selection should therefore consider the required deceleration time and regenerated energy.

If the process requires substantial braking, the appropriate braking configuration should be evaluated rather than assuming that the standard drive configuration is sufficient.

---

31. Product Strengths at a Glance

Strength	Practical Benefit
430 A Output	Controls large industrial motors
480 VAC	Suitable for large industrial electrical systems
350 HP Normal Duty	Suitable for substantial continuous loads
300 HP Heavy Duty	Suitable for demanding mechanical loads
Frame 8	High-power industrial construction
Air Cooled	Practical high-power thermal management
EtherNet/IP	Easy automation integration
Enhanced LCD HIM	Convenient local service
AC Precharge	Suitable high-power AC input architecture
EMC Filtering	Helps with system-level electrical compatibility
No DC Terminals	Defined AC-input configuration
No Dynamic Braking	Straightforward standard configuration
IP20 / Type 1	Suitable for protected industrial installations
MCC-Style Depth	Fits large industrial electrical arrangements

---

32. Product Selection Recommendation

For a large motor requiring approximately 430 A or less, the 20G1ABD430AN2NNNNN can be a strong choice when local commissioning and maintenance access are important.

If local access is not required, the related AN0 configuration can provide a more centralized arrangement.

If a permanent operator interface on the cabinet door is preferred, the related AN4 configuration is more appropriate.

If the motor current exceeds the 430 A capability, a higher-current PowerFlex 755 configuration should be selected.

The most important selection criteria are:

Motor current → Duty → Load characteristics → Overload → Braking → Communication → HIM → Enclosure → Cooling → Physical dimensions

---

33. Lifecycle and Replacement Consideration

The 20G1ABD430AN2NNNNN is a discontinued catalog configuration.

The corresponding newer direct-replacement configuration is 20G1ABD430JN2NNNNN.

This does not mean that the original model is irrelevant.

It can still be important for:

• Existing machinery
• Replacement projects
• Maintenance inventories
• Legacy production lines
• Equipment documentation
• Spare-parts identification
• Retrofit planning

When replacing an installed unit, the electrical and mechanical characteristics should be checked carefully.

Particular attention should be given to:

• Input voltage
• Current rating
• Duty rating
• Frame size
• HIM configuration
• Filtering
• CM-capacitor configuration
• Enclosure
• Communication
• Braking
• Physical dimensions
• Motor parameters

---

34. Final Technical Summary

Item	20G1ABD430AN2NNNNN
Brand	Allen-Bradley
Product Family	PowerFlex 750-Series
Product Series	PowerFlex 755
Product Type	Air-Cooled AC Packaged Drive
Input Voltage	480 VAC
Input Phase	3 Phase
DC Bus Class	650 VDC
Output Current	430 A
Normal Duty	350 HP
Normal Duty Power	Approximately 260 kW
Heavy Duty	300 HP
Heavy Duty Power	Approximately 224 kW
Light Duty	Approximately 400 HP class
Frame	Frame 8
Cooling	Forced Air
Input Type	AC Input with Precharge
DC Input Terminals	None
Dynamic Braking	None
Filtering	EMC Filter
CM Jumper	Removed
Communication	Embedded EtherNet/IP
HIM	Enhanced LCD Full Numeric
HIM Configuration	Local / Handheld
Enclosure	IP20 / NEMA Type 1
Cabinet Style	600 mm Deep MCC Style
Approx. Width	610 mm
Approx. Depth	465 mm
Approx. Height	~2100 mm class
Approx. Dimensions	~2100 × 610 × 465 mm
Approx. Weight	~620–635 kg
Main Applications	Pumps, fans, blowers, conveyors, compressors, mixers, process machinery
Main Advantage	High-power motor control with local HIM and network integration
Lifecycle	Discontinued
Direct Replacement	20G1ABD430JN2NNNNN

35. Overall Product Assessment

The 20G1ABD430AN2NNNNN is a large-frame industrial AC drive intended for serious motor-control applications.

Its combination of 480 VAC input, 430 A output current, 350 HP Normal Duty capability, Frame 8 construction and air-cooled design places it in the high-power industrial-drive category.

The most useful feature of the AN2 configuration is the Enhanced LCD Full Numeric HIM.

This provides a practical local interface for commissioning and maintenance while the embedded EtherNet/IP capability allows the drive to remain part of a centralized automation system.

The drive is well suited to large pumps, fans, blowers, conveyors, compressors, mixers and process machinery.

Its physical size is substantial, with an approximately 2100 × 610 × 465 mm drive-envelope class and an approximate 620–635 kg equipment weight class. Adequate floor strength, ventilation, lifting capability, cable space and service clearance should therefore be considered during installation planning.

For existing equipment, this model is particularly useful as a replacement and maintenance reference.

For new installations, the newer 20G1ABD430JN2NNNNN configuration should be evaluated where a direct replacement is required.

Overall, the 20G1ABD430AN2NNNNN can be characterized as a high-power 480 VAC PowerFlex 755 AC drive with 430 A output capability, Frame 8 air-cooled construction, embedded EtherNet/IP communication and an Enhanced LCD Full Numeric local HIM.

It is best suited to industrial plants where large motors need controlled speed, controlled acceleration, network integration and convenient local maintenance access.