Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |

The Siemens 6AG2136-6RA00-1BF0 SIPLUS ET 200SP F-RQ Safety Relay Output Module is a fail-safe relay output component designed for industrial automation and safety-related control applications. It belongs to the Siemens SIPLUS ET 200SP product family and is based on the standard ET 200SP F-RQ module 6ES7136-6RA00-0BF0.
The module provides one relay output with two normally open contacts. It is designed to switch compatible loads operating at 24 V DC or 24–230 V AC, with a maximum combined output current of 5 A under the specified conditions. This makes it suitable for applications such as controlling solenoid valves, DC contactors, and signal lamps within appropriately engineered industrial safety systems.
Unlike a conventional digital output module, the F-RQ is intended for safety-related switching applications. It can be controlled by a suitable fail-safe digital output module, allowing the overall system to implement safety functions such as controlled shutdown of external equipment.
The SIPLUS version includes conformal coating and enhanced environmental specifications. Its design supports operation in demanding industrial and railway-related environments when installed according to the applicable product documentation.
The 6AG2136-6RA00-1BF0 is a compact module with a 20 mm installation width. It uses a compatible ET 200SP BaseUnit and integrates into distributed I/O architectures managed by Siemens automation controllers.
When selecting this module, it is important to distinguish between the relay module itself and the complete safety system. The required safety performance depends on the F-CPU, F-DQ control module, configuration, wiring, diagnostics, and application design. The module alone does not automatically establish a SIL 3 or PL e safety function.
| Parameter | Specification |
|---|---|
| Brand | Siemens |
| Product Family | SIPLUS ET 200SP |
| Model | 6AG2136-6RA00-1BF0 |
| Product Type | Failsafe Relay Output Module |
| Module Designation | F-RQ 1×24 V DC / 24–230 V AC / 5 A |
| Base Standard Model | 6ES7136-6RA00-0BF0 |
| Output Type | Relay |
| Number of Relay Outputs | 1 |
| Relay Contacts | 2 normally open (NO) contacts |
| Control Voltage | 24 V DC |
| Permitted Control Voltage Range | 20.4–28.8 V DC |
| Load Voltage | 24 V DC and 24–230 V AC |
| Maximum Combined Output Current | 5 A |
| Backplane Bus Power Consumption | 100 mW |
| Typical Power Loss | 1 W |
| Installation Width | 20 mm |
| Compatible BaseUnit | ET 200SP BU Type F0 |
| Environmental Protection | Conformal coating |
| Temperature Specification | SIPLUS enhanced operating range; consult the exact product datasheet |
| Dimensions | 20 × 73 × 58 mm |
| Weight Provided | 0.068 kg |
| Typical Applications | Safety-related relay switching, solenoid valves, contactors, and signal lamps |
Technical values should be checked against the product datasheet and the actual installation conditions. The maximum switching current depends on load type, temperature, and the applicable derating requirements.
The 6AG2136-6RA00-1BF0 converts a safety-related control command into an electrical relay-switching action. It is designed to provide an interface between the fail-safe control system and external equipment that requires a switched load supply.
The module contains one relay output with two normally open contacts. When the relay is energized under the appropriate control conditions, the contacts change state and allow the connected load circuit to operate.
When the relay is de-energized, the normally open contacts return to their open state. This switching arrangement can be used in safety-related control circuits where the external equipment must respond to a defined control state.
The two contacts are associated with the same relay output. They should not be treated as two independently controlled output channels.
The relay coil operates from a 24 V DC control supply. The specified permissible voltage range is 20.4–28.8 V DC.
The control signal is supplied through the ET 200SP system architecture. The module responds to the configured control conditions and operates the relay contacts accordingly.
Correct power supply, BaseUnit selection, wiring, and system configuration are necessary for reliable operation.
The output contacts are designed for compatible 24 V DC and 24–230 V AC loads. This allows the module to interface with different types of industrial equipment.
Typical examples include:
The maximum combined output current is 5 A under specified conditions. Engineers must also consider inductive load characteristics, switching frequency, contact ratings, and external protection.
The F-RQ module is intended to be used in a safety-related automation architecture. It can be controlled by an appropriate fail-safe digital output module, such as a compatible F-DQ module.
The safety controller determines when the output should be energized or de-energized according to the configured safety logic. The relay module provides the physical switching interface for the external load.
The achievable safety level depends on the complete system architecture, including controller configuration, diagnostics, wiring, output control, and validation.
The module supports identification and maintenance data, including I&M information. These functions help engineers identify installed hardware and manage maintenance information within the automation system.
Firmware updates and system diagnostics should follow the applicable Siemens engineering procedures.
The 6AG2136-6RA00-1BF0 is designed to provide relay-based output switching within a distributed safety I/O system. It is typically installed as part of a larger Siemens ET 200SP configuration.
A Siemens fail-safe controller executes the safety program and evaluates signals from safety devices such as emergency-stop switches, protective-door sensors, and other safety-related inputs.
When a defined safety condition occurs, the controller can command the appropriate fail-safe output module. The F-RQ relay module then provides the required switching action for the connected load.
This architecture helps separate safety logic from the physical switching of external equipment.
The module is designed for the ET 200SP distributed I/O platform. It is installed on a compatible BaseUnit and communicates with the automation system through the station’s backplane and interface architecture.
The ET 200SP system allows control and I/O equipment to be distributed close to machinery and process equipment, reducing the need to route every field signal directly to a central control cabinet.
The relay output can switch suitable external devices, including contactors, solenoid valves, and signal lamps.
The connected load must remain within the module’s electrical ratings. For inductive loads, engineers should evaluate switching behavior and any required suppression components to protect the contacts and connected equipment.
The module can be used in a system designed to achieve high functional safety performance. However, the SIL or PL level is determined by the complete safety-related control system and its validated design.
A safety project should include appropriate hardware selection, fail-safe programming, diagnostics, wiring practices, proof testing, and documented validation.
The SIPLUS ET 200SP F-RQ module is suitable for applications where relay-based switching is required within a properly designed safety-related automation system.
Industrial machines may need to stop or isolate selected equipment when an emergency-stop device is activated.
The F-RQ relay output can be used as part of an appropriately engineered shutdown architecture to switch a compatible external control circuit. The complete safety function must be designed and validated according to the machine’s risk assessment.
Solenoid valves are widely used in pneumatic and hydraulic systems. They control the movement of cylinders, actuators, and other fluid-power components.
The module can provide relay switching for compatible solenoid valve circuits. Engineers should verify the valve’s voltage, current, inductive characteristics, and required suppression arrangements.
Industrial contactors are used to switch motors, heaters, and other electrical loads. In a safety-related system, a relay output may be used to control a suitable contactor circuit.
The contactor, feedback monitoring, protective devices, and control logic must be selected to satisfy the required safety function.
Manufacturing machines often use safety switches or interlock devices to monitor access doors and protective guards.
When an access condition is detected, the safety controller can execute the required response. The F-RQ module may provide relay switching for compatible external control equipment within the validated safety architecture.
The SIPLUS RAIL product range is designed for demanding transportation-related environments. This model has railway-related approvals and enhanced environmental characteristics.
It may be considered for suitable railway automation and auxiliary control applications, subject to the relevant railway standards, installation requirements, and system-level approval.
The module can also be used for compatible signal lamps and auxiliary control circuits where relay-based switching is required.
The electrical characteristics of each connected load must be checked before installation.
Correct installation is essential for reliable relay operation and the integrity of the overall safety function.
The 6AG2136-6RA00-1BF0 requires a compatible ET 200SP BaseUnit of type F0.
The BaseUnit provides the mechanical mounting and electrical connection between the module and the distributed I/O station. Confirm the exact BaseUnit catalog number and terminal arrangement before installation.
The relay coil uses a nominal 24 V DC supply, with a permitted range of 20.4–28.8 V DC.
Check the control supply voltage, current capacity, grounding arrangement, and wiring before commissioning. Unstable or incorrect supply conditions may affect relay operation.
Confirm that the connected equipment operates at a supported load voltage:
The total output current must not exceed the specified 5 A limit under the applicable operating conditions.
For inductive loads such as contactors and solenoid valves, evaluate switching frequency and contact protection requirements. Do not assume that the maximum resistive-load rating applies to every inductive application.
The permitted continuous current depends on ambient temperature and installation conditions. The current capability must be reduced where the manufacturer’s derating information requires it.
Adjacent modules carrying high loads can also increase local temperature. Provide adequate cabinet ventilation and follow the installation guidelines for module spacing and thermal management.
The F-RQ module must be integrated into a suitable fail-safe control architecture. Engineers should configure the corresponding F-CPU and F-DQ hardware, safety program, and diagnostic functions using the supported Siemens engineering environment.
The safety design should define the required safe state, output behavior, fault response, and reset conditions.
After installation, verify the module’s identification, BaseUnit compatibility, wiring, control supply, and load circuit.
Test the expected output behavior under normal operating conditions and relevant safety scenarios. Record the results and complete the required validation documentation before placing the machine into service.
The 6AG2136-6RA00-1BF0 is intended to work within a compatible ET 200SP and fail-safe automation environment.
| Component | Function | Integration Considerations |
|---|---|---|
| Siemens ET 200SP BaseUnit BU Type F0 | Provides module mounting and electrical connections | Confirm the exact BaseUnit type and terminal configuration |
| Siemens F-CPU | Executes fail-safe automation logic | Must be compatible with the system architecture and engineering configuration |
| Siemens F-DQ module | Provides fail-safe digital output control | Required for the documented high-level safety application |
| ET 200SP interface module | Connects the distributed I/O station to the controller or network | Select according to the station architecture |
| 24 V DC power supply | Supplies the relay coil and associated control circuits | Maintain the permitted voltage range and sufficient current capacity |
| Solenoid valve | Controls pneumatic or hydraulic flow | Verify voltage, current, and inductive-load requirements |
| DC contactor | Switches an external electrical circuit | Confirm coil characteristics and contactor feedback requirements |
| Safety sensors | Detect emergency stops, guard conditions, and other hazards | Integrate through the appropriate fail-safe input architecture |
| Industrial control cabinet | Houses the automation and safety equipment | Provide suitable temperature control, wiring separation, and protection |
The components listed above are examples of equipment used in a complete installation. They are not necessarily supplied with the relay output module.
The 6AG2136-6RA00-1BF0 is a SIPLUS-specific version of the standard ET 200SP F-RQ module. Replacement selection should account for both functional compatibility and environmental requirements.
| Alternative Model or Product | Description | Replacement Considerations |
|---|---|---|
| 6ES7136-6RA00-0BF0 | Standard ET 200SP F-RQ relay output module | Functional base model; compare environmental specifications and coating requirements |
| 6AG2136-6DB00-1CA0 | SIPLUS ET 200SP fail-safe digital output module | Different output technology and electrical characteristics |
| 6ES7136-6DB00-0CA0 | Standard ET 200SP F-DQ output module | May be part of the safety-control architecture but is not a direct relay-output substitute |
| Other ET 200SP F-RQ configurations | Related fail-safe relay output options | Confirm output count, contact arrangement, voltage, current, and BaseUnit compatibility |
Before replacing the module, verify:
A standard ET 200SP module may not provide the same environmental protection as its SIPLUS counterpart. A replacement should therefore be evaluated against the actual installation environment, not just its electrical function.
The F-RQ module provides relay-based output switching for compatible safety-related control applications.
Its output contacts support compatible 24 V DC and 24–230 V AC load circuits, allowing integration with different types of industrial equipment.
The relay output provides two normally open contacts associated with one relay output. This arrangement supports suitable external switching designs.
With a 20 mm installation width, the module supports compact distributed I/O station layouts.
The SIPLUS version includes conformal coating and enhanced environmental specifications for demanding applications.
When used with appropriate fail-safe control hardware and a validated safety architecture, the module can contribute to applications designed for high functional safety levels.
I&M data and supported firmware functions help engineers identify and maintain the module within the automation system.
It is a SIPLUS ET 200SP F-RQ fail-safe relay output module designed for safety-related industrial automation applications. It provides one relay output with two normally open contacts.
The 6AG2136-6RA00-1BF0 is the SIPLUS version, based on the standard 6ES7136-6RA00-0BF0. The SIPLUS model includes conformal coating and enhanced environmental specifications for demanding conditions.
It has one relay output with two normally open contacts. The two contacts belong to the same relay output and are not independently controlled channels.
The relay contacts support compatible 24 V DC and 24–230 V AC load circuits. The connected load must remain within the electrical ratings specified for the module.
The maximum combined output current is 5 A under the specified conditions. Temperature derating and load characteristics must be considered when selecting the connected equipment.
The module can be used in an architecture designed for up to SIL 3 / Category 4 / PL e when controlled by an appropriate fail-safe digital output module and integrated into a compliant, validated safety system. The complete safety function must meet all applicable design and validation requirements.
The module is designed for ET 200SP BaseUnits of type F0. Confirm the exact BaseUnit catalog number and terminal arrangement before installation.
It can switch a compatible solenoid valve circuit if the valve’s voltage, current, and load characteristics fall within the module’s ratings. Inductive-load protection and safety-system requirements must also be considered.
A standard digital output module is designed for general control signals, while the F-RQ is intended for relay-based switching within a fail-safe architecture. Its safety function depends on the associated controller, output control, wiring, and system validation.
Verify the complete catalog number, environmental specification, relay contact arrangement, control voltage, load ratings, BaseUnit compatibility, and safety-system configuration. Also check the physical condition and availability of the original module.
When purchasing the Siemens 6AG2136-6RA00-1BF0, confirm the full catalog number and ensure that the supplied product is the SIPLUS version rather than the standard ET 200SP F-RQ module. This distinction is important when the installation requires enhanced environmental protection or railway-related approvals.
For replacement projects, compare the module’s output contact arrangement, control voltage, load ratings, and BaseUnit compatibility with the installed equipment. Verify that the associated F-CPU, F-DQ module, and safety program support the intended configuration.
For used or surplus modules, request clear photographs of the product label, front panel, connection area, and packaging. Check for damaged contacts, cracked housings, contamination, and signs of improper storage. For safety-critical installations, confirm the supplier’s testing and traceability arrangements.
During maintenance, inspect the module and surrounding BaseUnit for loose connections, heat discoloration, and environmental contamination. Review diagnostic information and follow the manufacturer’s recommended inspection and proof-testing procedures.
Any change to a safety-related module, wiring arrangement, controller configuration, or safety program should be assessed through the site’s formal safety-management and validation process. Replacing a module with a similar-looking component does not automatically preserve the original safety performance.
The Siemens 6AG2136-6RA00-1BF0 SIPLUS ET 200SP F-RQ Safety Relay Output Module is a compact relay output component designed for fail-safe industrial automation applications. It provides one relay output with two normally open contacts and supports compatible 24 V DC and 24–230 V AC load circuits, with a maximum combined output current of 5 A under specified conditions.
Its SIPLUS construction, conformal coating, compact ET 200SP design, and integration with Siemens fail-safe automation equipment make it suitable for demanding control environments. For reliable operation, engineers should verify BaseUnit compatibility, load characteristics, temperature derating, and the complete safety architecture before installation or replacement.