Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |

The Siemens 6AG1277-1AA10-4AA0 SIPLUS NET CSM 1277 is a compact industrial Ethernet switch designed to expand network connectivity in SIMATIC S7-1200 automation systems. It provides a practical way to connect a PLC and additional Ethernet devices within a small industrial network, supporting communication between controllers, programming devices, operator interfaces, and other network nodes.
This model belongs to the Siemens SIPLUS product range and is based on the standard CSM 1277 switch, order number 6GK7277-1AA10-0AA0. The SIPLUS version incorporates conformal coating to provide additional protection for electronic components under specified environmental conditions.
The module supports 10 Mbps and 100 Mbps Ethernet communication and provides four RJ45 ports. It is designed to connect a SIMATIC S7-1200 controller and up to three additional Industrial Ethernet nodes. Its unmanaged switching architecture allows connected devices to exchange Ethernet data without requiring complex network configuration.
The 6AG1277-1AA10-4AA0 is particularly useful in compact automation installations where a controller needs additional Ethernet connections but a larger managed switch would be unnecessary. Its compact construction and mounting compatibility with the S7-1200 system help simplify installation in control cabinets.
Unlike a standard office network switch, this device is designed for integration into an industrial automation environment. It supports the communication requirements of PLC-based systems while providing a straightforward method of expanding local Ethernet connectivity.
| Parameter | Specification |
|---|---|
| Brand | Siemens |
| Product Model | 6AG1277-1AA10-4AA0 |
| Product Family | SIPLUS NET |
| Product Type | Industrial Ethernet Compact Switch |
| Product Designation | SIPLUS NET CSM 1277 |
| Standard Base Model | 6GK7277-1AA10-0AA0 |
| Switch Type | Unmanaged Ethernet Switch |
| Ethernet Transfer Rates | 10 Mbps / 100 Mbps |
| Ethernet Ports | 4 × RJ45 |
| Network Connection | SIMATIC S7-1200 and up to 3 additional nodes |
| Power Supply | External 24 V DC |
| Conformal Coating | Included |
| Operating Temperature | 0 to +60°C |
| Mounting | SIMATIC S7-1200 mounting rail |
| Network Topology | Line, tree, or star, subject to network design |
| Diagnostics | LED status indicators |
| Dimensions Provided | 75 × 100 × 45 mm |
| Weight Provided | 0.2 kg |
| Product Application | Industrial Ethernet network expansion |
Note: The dimensions and weight above follow the supplied product listing information. Manufacturer product data lists a net weight of approximately 0.23 kg.
The primary function of the SIPLUS NET CSM 1277 is to expand Ethernet connectivity for industrial automation equipment. It receives Ethernet frames from connected devices and forwards them through the appropriate network ports.
As an unmanaged switch, it operates without requiring users to configure VLANs, routing tables, or advanced network-management functions. This makes it suitable for relatively small automation networks where straightforward device connectivity is the main requirement.
A SIMATIC S7-1200 controller may need to communicate with several devices, including an engineering workstation, HMI panel, and other Ethernet-enabled equipment.
The CSM 1277 provides additional Ethernet connection points. It allows the controller and up to three further nodes to participate in the same local Industrial Ethernet network.
This arrangement can reduce the need for separate network expansion equipment in compact installations.
The switch receives Ethernet data through one port and forwards it toward the appropriate connected destination.
This process allows connected devices to exchange information through a common network infrastructure. For example, a programming computer can communicate with a PLC while an HMI exchanges process information with the same controller.
The module supports 10 Mbps and 100 Mbps Ethernet transfer rates. Actual communication performance depends on the connected devices, network traffic, cable quality, and overall network design.
The CSM 1277 is an unmanaged switch. It is designed to operate without user-defined network-management settings.
This simplifies installation because engineers do not need to configure advanced switching features for ordinary local connectivity. Once the power supply and Ethernet cables are correctly connected, the module can provide network communication between compatible devices.
However, unmanaged operation also means that advanced functions such as VLAN configuration, managed traffic prioritization, and centralized switch monitoring should not be assumed.
The CSM 1277 includes an autocrossover function. This allows the switch to recognize the required Ethernet signal arrangement and supports the use of uncrossed Ethernet cables.
This feature simplifies network wiring and reduces the need to select different cable types for different connection arrangements.
LED indicators provide basic visual information about device operation and Ethernet connections.
Maintenance personnel can use these indicators during commissioning and troubleshooting to check whether the module is powered and whether connected network ports are showing communication activity.
LED indication is a useful first diagnostic step, although it does not replace detailed network testing when communication problems occur.
The 6AG1277-1AA10-4AA0 is designed to support communication between automation devices within an Industrial Ethernet network. It is commonly positioned near the controller and connected equipment inside an electrical control cabinet.
The module is designed to connect a SIMATIC S7-1200 controller to Industrial Ethernet and provide additional connections for other network nodes.
This arrangement can support communication between the PLC, engineering workstation, HMI, and other compatible Ethernet devices.
The switch provides network connectivity; it does not replace the PLC’s control-processing functions or execute automation logic.
An HMI panel can communicate with a SIMATIC S7-1200 controller through the Industrial Ethernet network.
Operators can use the HMI to monitor process variables, view alarms, change authorized settings, and interact with the machine-control system. The CSM 1277 provides the physical network connection needed for this communication.
An engineering workstation can connect to the network to support PLC programming, diagnostics, configuration, and maintenance.
By providing an additional Ethernet port, the CSM 1277 makes it easier to connect a programming device without changing the basic controller network arrangement.
Some automation systems contain several Ethernet devices within a limited physical area. The CSM 1277 can provide additional connection points for these devices, helping establish a compact local network.
The number and type of connected devices must remain within the supported network arrangement and the requirements of the connected automation equipment.
The CSM 1277 is specifically designed for network expansion around SIMATIC S7-1200 controllers.
It can connect the PLC and additional Ethernet nodes, providing communication infrastructure for compact machine-control systems.
Typical connected equipment may include:
Packaging machines frequently contain PLCs, operator panels, and engineering interfaces that require Ethernet communication.
The CSM 1277 can provide additional network connections for these devices, supporting communication within the machine-control cabinet.
It can be used in equipment involving filling, labeling, wrapping, sorting, and product handling.
Industrial manufacturing systems use Ethernet networks to exchange information between controllers, operator interfaces, and engineering stations.
The CSM 1277 can help expand connectivity in compact production machines where a small unmanaged switch is sufficient.
Conveyors, sorting machines, and automated handling equipment may use Ethernet-connected control devices.
The switch can provide local network connections for the PLC and additional devices, supporting communication within the equipment.
Small process-control installations may use Ethernet communication for PLC programming, operator monitoring, and equipment integration.
The CSM 1277 can provide a compact network expansion solution where the required communication architecture is compatible with an unmanaged switch.
Machine manufacturers often need a repeatable network arrangement for PLCs, HMIs, and service computers.
The CSM 1277 provides a compact solution that can be incorporated into control panels for standardized machine designs.
Correct installation is important for reliable Ethernet communication and long-term operation.
The CSM 1277 is designed for installation with the SIMATIC S7-1200 system. Its compact form allows it to be mounted on the appropriate system rail inside an electrical control cabinet.
Before installation, check the available mounting space and ensure that the module can be accessed for wiring and maintenance.
The supplied dimensions are 75 × 100 × 45 mm. Confirm the actual mechanical drawing when preparing a control-panel layout.
The module requires an external 24 V DC power supply.
Verify the supply voltage and polarity before energizing the device. The power source should be suitable for industrial control applications and provide adequate capacity for the connected equipment.
Incorrect power wiring may prevent the switch from starting or cause equipment damage.
Use suitable industrial Ethernet cables with RJ45 connectors to connect the PLC and additional network devices.
The module provides four Ethernet ports and supports 10/100 Mbps communication. Check that the connected equipment and network cables support the required communication speed.
Cable routing should be planned to minimize unnecessary exposure to electrical interference from high-power equipment.
The CSM 1277 supports compact network arrangements such as line, tree, and star topologies, depending on the overall system design.
Engineers should plan the connection arrangement before wiring the control cabinet. Avoid creating unintended network loops, and ensure that the network structure is consistent with the capabilities of the connected devices.
The 6AG1277-1AA10-4AA0 is specified for an operating ambient temperature range of 0 to +60°C in the horizontal mounting position.
Its conformal coating provides additional protection for electronic assemblies under the conditions defined for the SIPLUS product.
The coating does not mean that the module is waterproof or suitable for unrestricted exposure to corrosive liquids, heavy contamination, or condensation. The control cabinet should provide an appropriate installation environment.
After completing the wiring, energize the module and inspect the LED indicators.
Check that the connected PLC and other Ethernet devices can communicate as expected. Verify PLC programming access, HMI communication, and any required data exchange.
If communication is unavailable, inspect the power supply, Ethernet connectors, cable condition, device network settings, and LED status before replacing the switch.
The SIPLUS NET CSM 1277 is intended for use with compatible Industrial Ethernet equipment.
| Component | Function | Integration Considerations |
|---|---|---|
| Siemens SIMATIC S7-1200 PLC | Main automation controller | Primary controller connection supported by the CSM 1277 |
| Siemens HMI Panel | Operator monitoring and machine control | Connect through a compatible Ethernet port |
| Engineering Workstation | PLC programming and diagnostics | Requires compatible Ethernet configuration and software |
| Industrial Ethernet Cable | Network data transmission | Use suitable RJ45 cables |
| 24 V DC Power Supply | Supplies electrical power to the switch | Verify voltage, polarity, and current capacity |
| Ethernet-Enabled Automation Device | Exchanges data with the PLC network | Confirm Ethernet speed and communication compatibility |
| Control Cabinet | Houses automation and network equipment | Provide suitable temperature and environmental conditions |
The listed components are examples of equipment that may be integrated into a complete automation system. They are not necessarily included with the switch.
When replacing the 6AG1277-1AA10-4AA0, engineers should distinguish between the SIPLUS version and its standard CSM 1277 base model.
| Model | Description | Replacement Considerations |
|---|---|---|
| 6GK7277-1AA10-0AA0 | Standard CSM 1277 Compact Switch Module | Base model for the SIPLUS version; environmental specifications differ |
| 6AG1277-1AA10-2AA0 | SIPLUS NET CSM 1277 extended-temperature version | Offers a different specified operating temperature range |
| 6AG1277-1AA10-4AA0 | SIPLUS NET CSM 1277 | Original model covered in this article |
| Siemens SCALANCE Industrial Ethernet Switches | Industrial network switching product family | Consider when additional network functions or different port configurations are required |
Before selecting an alternative, compare:
The standard 6GK7277-1AA10-0AA0 and SIPLUS 6AG1277-1AA10-4AA0 share the CSM 1277 platform, but their environmental specifications are not identical. A replacement should be selected according to the actual operating conditions.
The module provides four Ethernet ports in a compact housing, making it suitable for control cabinets with limited installation space.
It allows a SIMATIC S7-1200 controller and up to three additional nodes to connect to Industrial Ethernet.
Support for both 10 Mbps and 100 Mbps transfer rates provides compatibility with suitable Ethernet devices used in industrial automation.
The absence of complex network configuration simplifies installation in small local automation networks.
The SIPLUS configuration includes conformal coating to provide additional protection for electronic components under specified environmental conditions.
The CSM 1277 supports line, tree, and star network arrangements when properly designed for the connected equipment.
Visual status indicators help technicians check power and network-port activity during commissioning and maintenance.
Its design and mounting arrangement support integration into SIMATIC S7-1200 automation installations.
It is a SIPLUS NET CSM 1277 compact industrial Ethernet switch designed to connect a SIMATIC S7-1200 controller and up to three additional Ethernet nodes.
The CSM 1277 provides four RJ45 Ethernet ports.
It supports Ethernet transfer rates of 10 Mbps and 100 Mbps.
No. It is an unmanaged Ethernet switch designed for straightforward network expansion without advanced switch configuration.
The 6AG1277-1AA10-4AA0 is the SIPLUS version based on the standard 6GK7277-1AA10-0AA0. The SIPLUS version includes conformal coating and has its own specified environmental operating range.
It uses an external 24 V DC supply. Verify the power connection and electrical requirements before installation.
The specified operating temperature range is 0 to +60°C in the horizontal mounting position.
Yes, it can provide Ethernet connections for compatible devices such as HMI panels and engineering computers, within the supported network arrangement.
It uses RJ45 Ethernet connections and includes an autocrossover function that supports the use of uncrossed Ethernet cables. Suitable industrial Ethernet cables should be selected according to the installation environment.
Verify the complete order number, number of ports, transfer rates, power supply, mounting arrangement, operating temperature, and conformal-coating requirements. A standard CSM 1277 should not automatically be considered equivalent to the SIPLUS version in every environment.
When purchasing the Siemens 6AG1277-1AA10-4AA0, verify the complete order number and confirm that the product is the SIPLUS NET CSM 1277 version rather than the standard CSM 1277 module.
For replacement projects, check the required Ethernet port count, connected device types, power supply, mounting arrangement, and operating temperature. These details help ensure that the replacement can operate within the existing automation network.
For used or surplus equipment, inspect the housing, RJ45 ports, power terminals, mounting clips, and visible condition of the electronic assembly. Request clear product photographs and confirm the unit’s condition before installation.
During routine maintenance, check the stability of the 24 V DC supply, inspect Ethernet cables and connectors, and monitor the LED indicators. Keep the module installed in a suitable control-cabinet environment and avoid unnecessary cable movement or mechanical stress on the connectors.
For communication problems, check the power supply first, followed by the Ethernet cables, connected-device settings, and port indicators. A systematic inspection can help identify whether the problem originates from the switch, cable, PLC, or another network device.
The Siemens 6AG1277-1AA10-4AA0 SIPLUS NET CSM 1277 is a compact unmanaged Industrial Ethernet switch designed for SIMATIC S7-1200 network expansion. With four RJ45 ports and 10/100 Mbps communication, it connects a controller and up to three additional Ethernet nodes within a local automation network.
Its conformal coating, 24 V DC power supply, compact mounting arrangement, and LED diagnostics make it suitable for compatible industrial control installations. When selecting or replacing this module, engineers should verify the exact SIPLUS order number and environmental requirements to maintain reliable network communication.