Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |

The Siemens 6AG1244-0BB12-2BA1 SIPLUS G120 CU240E-2 USS Control Unit is a specialized drive control unit designed for use with SINAMICS G120 variable frequency drive systems. It manages motor-control functions, processes control signals, and provides communication between the drive system and higher-level automation equipment.
Unlike a complete variable frequency drive, the CU240E-2 USS is the control section of a modular drive architecture. It works with a compatible SINAMICS G120 Power Module, which handles the power conversion required to operate the connected motor. The Control Unit manages the drive’s operating logic, command processing, parameter settings, and communication functions.
This SIPLUS version is based on the standard Siemens 6SL3244-0BB12-1BA1 control unit. It includes conformal coating on its electronic assemblies and is designed for an extended operating temperature range of -20°C to +55°C. These characteristics make it suitable for industrial installations where environmental conditions may be more demanding than those found in conventional control cabinets.
The 6AG1244-0BB12-2BA1 uses an RS-485 interface with the USS communication protocol. Its integrated I/O configuration includes six digital inputs, three digital outputs, two analog inputs, and two analog outputs. It also supports Safety Integrated Safe Torque Off (STO), allowing the drive system to implement an appropriate safety-related torque-removal function when integrated and validated correctly.
The control unit provides a practical interface between a PLC, operator-control equipment, sensors, and the SINAMICS G120 drive system. Its compact design and SIPLUS environmental protection features make it useful in industrial motor-control applications that require reliable communication and coordinated drive operation.
| Parameter | Specification |
|---|---|
| Brand | Siemens |
| Product Family | SIPLUS SINAMICS G120 |
| Model | 6AG1244-0BB12-2BA1 |
| Product Type | Drive Control Unit |
| Control Unit Designation | CU240E-2 USS |
| Based on Standard Model | 6SL3244-0BB12-1BA1 |
| Communication Interface | RS-485 |
| Communication Protocol | USS |
| Digital Inputs | 6 |
| Digital Outputs | 3 |
| Analog Inputs | 2 |
| Analog Outputs | 2 |
| Safety Function | Safety Integrated STO |
| Encoder Interface | PTC/KTY interface configuration |
| Memory and Service Interface | USB and SD/MMC interface |
| Protection Rating | IP20 |
| Conformal Coating | Yes |
| Operating Temperature | -20°C to +55°C |
| Power Module | Not included |
| Width | 73 mm |
| Height | 199 mm |
| Depth | 46 mm |
| Dimensions | 73 × 199 × 46 mm |
| Weight | 0.49 kg |
| Typical Application | SINAMICS G120 motor-control systems |
The control unit is supplied without a Power Module. Confirm the exact compatible drive hardware and firmware requirements before installation.
The CU240E-2 USS acts as the control center of a SINAMICS G120 drive system. It receives operating commands, processes feedback signals, manages motor-control functions, and communicates with external automation equipment.
The control unit receives commands from a PLC, operator interface, or another configured control source. These commands can include start, stop, speed reference, direction, and other operating instructions.
The CU240E-2 USS processes the commands and coordinates the operation of the connected Power Module. This arrangement separates the control functions from the power-conversion hardware, allowing the drive system to be configured for different motor and application requirements.
The control unit manages the selected motor-control strategy according to the configured SINAMICS G120 system.
The drive can support V/f control and sensorless vector-control functions, depending on the selected configuration and application parameters. V/f control is commonly used for applications where a relatively straightforward relationship between motor voltage and frequency is sufficient.
Sensorless vector control can provide improved motor response and torque management in applications that require more demanding speed-control performance.
Actual performance depends on the connected Power Module, motor characteristics, firmware, parameter settings, and load conditions.
The control unit provides six digital inputs and three digital outputs.
Digital inputs can be used to receive external signals such as start commands, stop requests, operating-mode selections, and equipment interlocks. Digital outputs can provide status information or control signals to other equipment, depending on the configured functions.
These I/O points allow the drive to participate in machine-control sequences without requiring every command or status signal to pass through a communication network.
Two analog inputs and two analog outputs are available for compatible process signals.
Analog inputs can receive external reference signals, such as speed commands or process measurements. Analog outputs can be configured to provide selected operating information to other control equipment.
The signal type, electrical range, scaling, and terminal assignment should be checked against the applicable Siemens documentation before wiring.
The 6AG1244-0BB12-2BA1 uses an RS-485 interface with the USS protocol.
USS provides a serial communication method for exchanging drive commands, parameter information, and operating data. A compatible PLC or controller can use this interface to coordinate the drive with other equipment in an automated system.
The communication settings, addressing, baud rate, and network wiring must be configured consistently between the control unit and the connected controller.
The control unit supports Safety Integrated Safe Torque Off.
STO is designed to prevent the drive from generating torque at the motor when the safety function is activated through a properly designed safety circuit. It is useful in machine designs where hazardous motor movement must be prevented under specified conditions.
STO is not the same as electrical isolation. It does not replace the required procedures for disconnecting and verifying the absence of hazardous electrical energy during maintenance. Safety functions must be designed, wired, validated, and maintained according to applicable safety standards.
The Siemens 6AG1244-0BB12-2BA1 is an important control component within a SINAMICS G120 drive installation. It connects the motor-control system with the broader automation architecture.
A PLC can send operating commands to the CU240E-2 USS through the configured USS communication interface or suitable control signals.
For example, a PLC may start a conveyor motor when production conditions are satisfied, adjust its speed according to material flow, and stop it when a downstream process is unavailable.
The control unit processes these commands and manages the connected drive hardware.
An HMI can provide operators with access to motor-control commands, operating information, and alarm indications.
In a typical installation, the HMI communicates with the PLC, which coordinates the drive system. Depending on the control architecture, drive parameters and operating information may also be accessed through the USS communication connection.
The integrated analog and digital I/O allows the control unit to interact with external devices.
For example, digital inputs may receive machine interlock signals, while analog inputs may be used for a speed reference or another compatible process signal. Outputs can communicate selected drive conditions to the surrounding equipment.
The SINAMICS G120 platform separates the Control Unit from the Power Module. This modular structure allows the control and power sections to be selected according to the motor and application.
The CU240E-2 USS provides the control functions, while the compatible Power Module supplies the required power conversion. Correct matching between these components is essential for safe and reliable operation.
The 6AG1244-0BB12-2BA1 can be used in industrial systems that require coordinated motor control, serial communication, and integrated safety functions.
Conveyor systems often require adjustable motor speed to coordinate product movement between different production stages.
The CU240E-2 USS can receive speed and operating commands from a PLC and coordinate the connected G120 drive. Digital inputs can be used for external interlocks, while analog signals can support compatible speed-reference arrangements.
Industrial pumps may need to adjust motor speed according to pressure, flow, or process demand.
A compatible SINAMICS G120 system controlled by this unit can support variable-speed operation. The appropriate control method and motor parameters should be selected according to the pump’s operating characteristics.
Fans and ventilation equipment frequently operate under changing airflow requirements.
When used with an appropriately selected Power Module and motor, the control unit can coordinate speed adjustments through PLC commands or configured analog references.
Packaging lines use multiple motors for feeding, conveying, sealing, and other production operations.
The CU240E-2 USS can provide drive control and I/O integration within a PLC-based machine architecture. Coordinated operation can help maintain production timing and reduce unnecessary interruptions.
Manufacturing equipment may require controlled motor acceleration, speed adjustment, and defined stopping behavior.
The control unit can support these requirements when paired with compatible SINAMICS G120 hardware and correctly configured control logic.
The SIPLUS version includes conformal coating and an extended operating temperature range compared with standard configurations.
These characteristics make it relevant to installations where temperature and environmental conditions require additional consideration. The IP20 protection rating still applies, so the control unit must be installed in an appropriate enclosure.
Correct installation is essential for reliable communication, drive performance, and safety.
The 6AG1244-0BB12-2BA1 is a Control Unit, not a complete drive.
Before installation, confirm that the connected SINAMICS G120 Power Module is compatible with the CU240E-2 USS. Check the drive configuration, hardware revision, firmware requirements, and supported motor ratings.
Do not connect a motor directly to the Control Unit.
The control unit has an IP20 protection rating. It should be installed in a suitable control cabinet that provides protection against dust, moisture, accidental contact, and other environmental hazards.
Maintain the manufacturer’s required mounting clearances and ventilation conditions. Avoid installing the unit where condensation, conductive particles, or corrosive contaminants may damage the electronics.
The RS-485 interface should be wired according to the applicable USS communication guidelines.
Check the communication cable, polarity, shielding, grounding, network topology, and termination requirements. Incorrect wiring or inconsistent communication parameters may result in intermittent communication or failure to establish a connection.
Identify the required signal functions before connecting external equipment.
Digital inputs may be assigned to operating commands or interlocks. Digital outputs can be configured for selected status functions. Analog inputs and outputs should be matched to the electrical signal ranges and scaling requirements of the connected devices.
Always verify terminal assignments and electrical specifications using the correct documentation.
After installation, configure the drive according to the motor nameplate and application requirements.
Important settings may include motor voltage, rated current, rated frequency, speed limits, acceleration and deceleration times, command sources, and communication parameters.
The selected control method should match the application. If sensorless vector control is required, follow the manufacturer’s commissioning and motor-identification procedures.
Where STO is used, the safety circuit must be designed and implemented according to the machine’s risk assessment and applicable standards.
Verify the safety wiring, safety devices, response behavior, and required validation procedures. Do not treat an ordinary PLC stop command as equivalent to a validated safety function.
Before returning the system to production, verify:
Record the final parameter configuration and communication settings for future maintenance.
The 6AG1244-0BB12-2BA1 is designed to operate within the SINAMICS G120 modular drive platform.
| Component | Function | Integration Considerations |
|---|---|---|
| SINAMICS G120 Power Module | Provides motor power conversion | Must be compatible with the CU240E-2 USS |
| Three-phase AC motor | Converts electrical power into mechanical motion | Verify voltage, current, power, and motor-control requirements |
| SIMATIC PLC | Provides higher-level automation control | Configure compatible USS communication or I/O signals |
| HMI | Provides operator commands and monitoring | Usually integrated through the PLC or configured drive interface |
| RS-485 communication cable | Connects the USS communication interface | Follow wiring, shielding, and termination requirements |
| Digital sensors and switches | Provide machine status and interlock signals | Match electrical characteristics to the digital inputs |
| Analog transmitters | Provide process reference or measurement signals | Verify signal type, range, and scaling |
| Safety relay or safety controller | Supports the machine safety architecture | Must be designed and validated for the required STO function |
| Control cabinet | Protects and houses the drive components | Maintain appropriate environmental conditions and ventilation |
The Control Unit does not include the Power Module. The complete drive system must be assembled from compatible components.
The 6AG1244-0BB12-2BA1 belongs to the SIPLUS G120 CU240E-2 USS family. Other SINAMICS G120 Control Units may look similar but use different communication interfaces or control configurations.
| Model | Description | Main Difference |
|---|---|---|
| 6AG1244-0BB12-2BA1 | SIPLUS G120 CU240E-2 USS | RS-485 with USS protocol and conformal coating |
| 6SL3244-0BB12-1BA1 | Standard CU240E-2 USS | Standard industrial version without the SIPLUS environmental configuration |
| 6AG1244-0BB12-2PA1 | SIPLUS G120 CU240E-2 DP | PROFIBUS DP communication variant |
| 6AG1244-0BB12-2FA0 | SIPLUS G120 CU240E-2 PN | PROFINET communication variant |
These models are related but are not automatically interchangeable.
Before selecting a replacement, verify:
A communication-interface difference can affect PLC hardware configuration and control-program logic. Replacing a USS unit with a PROFIBUS or PROFINET model may therefore require changes to the automation system.
The conformal coating provides additional protection for electronic assemblies in demanding industrial environments. The extended temperature range supports installations with wider ambient-temperature requirements.
The RS-485 USS interface provides a serial communication method for connecting the drive to compatible controllers and automation equipment.
Six digital inputs, three digital outputs, two analog inputs, and two analog outputs provide multiple options for connecting sensors, control signals, and external devices.
The integrated STO capability supports safety-related drive applications when correctly designed and validated as part of the machine safety system.
Separating the Control Unit from the Power Module allows the drive system to be configured around the motor and application requirements.
The dimensions of 73 × 199 × 46 mm and supplied weight of 0.49 kg make the control unit suitable for installation in appropriately designed industrial control cabinets.
The CU240E-2 USS can coordinate motor operation with PLCs, operator interfaces, sensors, and other automation equipment through its communication and I/O functions.
It is a SIPLUS G120 CU240E-2 USS Control Unit used in SINAMICS G120 variable frequency drive systems. It manages drive control functions, I/O signals, communication, and supported safety functions.
No. It is the Control Unit section of a modular drive system. A compatible SINAMICS G120 Power Module is required for the complete motor-drive installation.
The 6AG1244-0BB12-2BA1 is the SIPLUS version based on the standard 6SL3244-0BB12-1BA1. The SIPLUS version includes conformal coating and an extended environmental operating-temperature specification.
It uses an RS-485 interface with the USS communication protocol. The connected controller must support the required USS communication configuration.
The unit provides six digital inputs, three digital outputs, two analog inputs, and two analog outputs.
No. This specific model is the USS communication variant. A PROFINET application requires a suitable PROFINET Control Unit, such as the corresponding CU240E-2 PN version.
Yes. It supports Safety Integrated STO. The safety function must be implemented and validated according to the system’s safety design and applicable standards.
The SIPLUS product specification gives an operating range of -20°C to +55°C. The actual installation must still meet the required enclosure, humidity, condensation, and ventilation conditions.
No. The Control Unit does not perform the power conversion needed to drive a motor. It must be installed with a compatible SINAMICS G120 Power Module and the required electrical connections.
Verify the complete order number, communication protocol, I/O configuration, safety requirements, Power Module compatibility, firmware, and environmental specifications. Similar-looking CU240E-2 models may have different interfaces and cannot be assumed to be direct replacements.
When purchasing the Siemens 6AG1244-0BB12-2BA1, verify the complete order number and product designation. The USS communication interface is a defining feature of this model, so it should not be confused with the PROFIBUS DP or PROFINET versions.
For replacement projects, compare the existing Control Unit’s hardware and firmware configuration with the proposed replacement. Confirm that the installed Power Module supports the selected Control Unit and that the PLC can communicate through the required USS interface.
For used or surplus units, inspect the connectors, terminals, housing, and electronic assemblies. Check for signs of corrosion, contamination, mechanical damage, or improper storage. Confirm that the supplied unit is the SIPLUS version with the required conformal coating.
During maintenance, keep unused interfaces protected with the supplied plug covers as required by the manufacturer’s instructions. Check wiring, communication stability, grounding, and enclosure conditions. Back up drive parameters and document any changes made during commissioning.
The STO function should be tested according to the machine’s safety validation schedule. Any changes to safety wiring, drive hardware, or firmware should be assessed by qualified personnel before the system returns to operation.
The Siemens 6AG1244-0BB12-2BA1 SIPLUS G120 CU240E-2 USS Control Unit is a specialized control component for SINAMICS G120 variable frequency drive systems. It combines RS-485 USS communication, integrated digital and analog I/O, Safety Integrated STO, and SIPLUS conformal coating in a compact industrial design.
With its extended operating-temperature range and compatibility with the modular SINAMICS G120 platform, it is suitable for drive installations requiring dependable motor-control coordination and serial communication. Correct Power Module matching, firmware verification, communication configuration, and safety validation are essential for reliable operation.