Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |

The Siemens 6AG1244-0BB12-2FA0 is a SIPLUS G120 CU240E-2 PN Control Unit designed for controlling and monitoring SINAMICS G120 drive systems. It serves as the central control component of a compatible modular drive configuration, managing motor-control functions, processing input and output signals, and coordinating communication with higher-level automation equipment.
This model is based on the standard Siemens 6SL3244-0BB12-1FA0 control unit and incorporates conformal coating on its printed circuit board assemblies. The SIPLUS design is intended to provide additional protection under environmental conditions that may affect conventional electronic equipment, including condensation and certain chemically or biologically active substances. Its specified operating temperature range is -20 to +55 °C.
The CU240E-2 PN combines motor-control functionality with PROFINET communication and Safety Integrated Safe Torque Off (STO). It supports V/f control and sensorless vector control, allowing engineers to configure motor operation according to the requirements of the connected machine.
The control unit provides six digital inputs, three digital outputs, two analog inputs, and two analog outputs. One fail-safe digital input function can be implemented using two standard digital inputs, subject to the specified safety configuration. Additional interfaces include USB and SD/MMC support for commissioning, parameter management, and service operations.
The 6AG1244-0BB12-2FA0 is supplied without a Power Module. It must therefore be installed with a compatible SINAMICS G120 power component to form a complete drive system. The control unit manages the drive, while the Power Module handles the power conversion required by the motor.
Its combination of drive-control functions, network communication, safety functionality, and conformal coating makes it suitable for industrial automation installations where dependable motor control and integration with a PROFINET-based control architecture are required.
| Parameter | Specification |
|---|---|
| Brand | Siemens |
| Product Family | SIPLUS G120 |
| Model | 6AG1244-0BB12-2FA0 |
| Product Type | Control Unit |
| Control Unit Type | CU240E-2 PN |
| Base Model | 6SL3244-0BB12-1FA0 |
| Drive System | SINAMICS G120 |
| Communication Interface | PROFINET |
| Safety Function | Safety Integrated STO |
| Digital Inputs | 6 |
| Fail-Safe Digital Input | Maximum 1 F-DI function, using 2 standard digital inputs |
| Digital Outputs | 3 |
| Analog Inputs | 2 |
| Analog Outputs | 2 |
| Analog Input Signal | -10 to +10 V or 0/4 to 20 mA, selectable |
| Control Methods | V/f control and sensorless vector control |
| Motor Encoder Vector Control | Not supported by this configuration |
| Supply from Power Module | 24 V DC |
| External Supply Range | 20.4–28.8 V DC |
| Maximum Current Consumption | 0.5 A |
| Maximum Power Loss | 5.5 W |
| USB Interface | Yes |
| SD/MMC Interface | Yes |
| PTC/KTY Interface | Supported |
| PCB Protection | Conformal coating |
| Operating Temperature | -20 to +55 °C |
| Protection Rating | IP20 |
| Power Module Included | No |
| Dimensions | 73 × 199 × 46 mm |
| Weight | 0.49 kg |
Technical specifications are based on the identified product configuration. Confirm the applicable hardware and firmware documentation before integrating the control unit into a safety-related or motion-control application.
The CU240E-2 PN performs the main control tasks within a modular SINAMICS G120 drive system. It processes operating commands, evaluates feedback and status signals, manages motor-control functions, and communicates with the automation system.
The control unit determines how the connected drive responds to speed references, start and stop commands, operating limits, and other configured parameters.
It supports V/f control and sensorless vector control. V/f control regulates the relationship between motor voltage and frequency, while sensorless vector control provides more advanced motor regulation without requiring an encoder for the supported operating mode.
The appropriate control method depends on the motor, load characteristics, and required speed and torque performance.
Voltage-to-frequency control is a common method for operating AC motors in applications where straightforward speed adjustment is sufficient.
The CU240E-2 PN supports linear and square-law V/f parameterization, as well as ECO operation. These options allow the drive to be configured for different load characteristics.
Linear V/f control is commonly used for general-purpose motor loads. Square-law characteristics are often relevant to fan and pump applications, where torque requirements change with motor speed.
The ECO function can adjust drive operation to support energy-conscious motor operation under suitable load conditions.
The control unit also supports vector control without an encoder. This method provides more detailed control of motor behavior than basic V/f operation.
Sensorless vector control can improve torque response and speed regulation in applications where load conditions change during operation. It is useful when the machine requires more consistent motor performance but does not use an encoder for speed feedback.
This model does not support vector control with an encoder. Applications requiring encoder-based closed-loop control must use an appropriate alternative control configuration.
The six digital inputs allow the control unit to receive external commands and status signals. These may include start, stop, enable, fault reset, and other application-specific signals.
The three digital outputs can provide status or control signals to external equipment, depending on the configured functions.
Two analog inputs support voltage or current signals. These can be used for speed references, process values, or other analog control requirements. Two analog outputs can provide corresponding signals to external monitoring or control equipment.
Correct signal scaling, wiring, and parameter configuration are essential for reliable operation.
The PROFINET interface connects the control unit to a suitable PLC or industrial network. This allows the drive to exchange operating commands, speed references, status information, and diagnostic data with the automation system.
Through network communication, a PLC can coordinate the motor with other machine components and adjust drive operation according to production requirements.
The communication configuration must be matched to the PLC hardware, network topology, device name, IP settings, and selected telegram or data exchange configuration.
The control unit supports Safety Integrated Safe Torque Off (STO). STO is intended to prevent the drive from generating torque by disabling the relevant power-stage control function.
It is used as part of a properly engineered machine-safety system. STO is not equivalent to electrical isolation and does not remove hazardous voltage from the drive or motor terminals.
Safety functions must be designed, wired, commissioned, and validated according to the applicable Siemens documentation and machinery safety requirements.
The 6AG1244-0BB12-2FA0 functions as the drive-control interface between the automation system and the SINAMICS G120 power stage.
A PLC can communicate with the control unit over PROFINET. The PLC sends commands and reference values, while the drive returns operating status and diagnostic information.
This arrangement allows motor operation to be coordinated with production sequences, sensors, actuators, and other drives.
For example, a PLC may adjust conveyor speed according to product flow or coordinate a pump with pressure measurements from the process.
An HMI can display drive status, operating speed, alarms, and other process information through the PLC or an appropriate network architecture.
Operators can use the HMI to monitor the drive and select permitted operating modes. Access to parameters and safety-related settings should be managed according to the plant’s control and maintenance procedures.
The control unit is one component of a modular drive system. It must be combined with a compatible Power Module and the required motor and electrical accessories.
The control unit manages the drive’s operating behavior, while the Power Module supplies the motor with controlled electrical power.
This modular arrangement allows engineers to select the control and power components according to the application, rather than treating the control unit as a standalone frequency converter.
The integrated STO capability can be incorporated into a suitable machine-safety architecture. The final safety design may involve safety relays, safety PLCs, emergency-stop devices, protective doors, and other safety components.
The safety circuit must be designed and validated as a complete system. The presence of STO in the control unit does not automatically make the entire machine safety-compliant.
The Siemens 6AG1244-0BB12-2FA0 is intended for SINAMICS G120 drive applications in industrial automation environments. Its control functions and PROFINET communication support a range of motor-driven machines.
Conveyor systems require controlled motor operation to transport products between production stages. The CU240E-2 PN can receive speed references and operating commands from a PLC over PROFINET.
The drive system can be configured to coordinate conveyor speed with upstream and downstream machinery. Controlled acceleration and deceleration can also help reduce mechanical stress during normal operation.
Industrial pumps are often required to operate at different speeds according to pressure, flow, or process demand.
The control unit’s V/f and sensorless vector-control functions allow a compatible G120 drive system to regulate motor speed. In suitable pump applications, square-law V/f characteristics and ECO operation may support more efficient motor operation.
Fans and ventilation equipment frequently operate under changing airflow requirements. Variable-speed control can adjust fan operation according to environmental conditions or production demand.
The control unit supports the configuration of suitable V/f characteristics for fan-type loads. PROFINET communication also allows ventilation equipment to be integrated into a central building or plant automation system.
Packaging machines use motors for feeding, conveying, winding, and auxiliary movement. Speed control is important for coordinating the movement of products and packaging materials.
A G120 drive with the CU240E-2 PN can receive operating references from a PLC and report drive status through PROFINET.
The final application design should confirm that the available control performance is sufficient for the required machine cycle and motion accuracy.
Manufacturing systems often contain multiple motor-driven machines operating as part of a coordinated production process.
The control unit supports network-based drive management, allowing motor operation to be integrated into a wider automation architecture.
Its digital and analog interfaces can also be used for local signals and process-related control functions.
The SIPLUS version includes conformal coating on its printed circuit board assemblies. This provides additional protection against certain environmental influences compared with a standard uncoated configuration.
It is relevant to installations where condensation or chemically active environmental conditions may affect electronic equipment. However, its IP20 rating remains important: the control unit is not designed for direct exposure to water or unrestricted dust ingress.
Correct installation is necessary for reliable drive operation, communication, and safety performance.
The 6AG1244-0BB12-2FA0 is a control unit, not a complete standalone drive. Before installation, identify the compatible SINAMICS G120 Power Module and confirm that the selected components are supported together.
Check the control unit’s hardware version, firmware requirements, Power Module compatibility, and applicable configuration documentation.
The supplied dimensions are 73 × 199 × 46 mm, with a net weight of 0.49 kg.
Install the control unit according to the designated SINAMICS G120 mounting arrangement. Allow adequate access for wiring, commissioning, and maintenance.
The specified operating temperature range is -20 to +55 °C. The SIPLUS conformal coating provides additional protection for electronic assemblies, but it does not replace the need for suitable enclosure design and environmental control.
The IP20 protection rating means the equipment must be installed in an appropriate cabinet or protected location.
The control unit receives its operating voltage from the Power Module, with a specified supply voltage of 24 V DC. An external supply can also be used within the documented range of 20.4 to 28.8 V DC.
The maximum current consumption is 0.5 A, and the maximum power loss is 5.5 W.
Verify the power supply arrangement and wiring requirements before commissioning. The supply must be stable and appropriate for the connected control equipment.
Connect the control unit to the industrial Ethernet network using the designated PROFINET interface.
During commissioning, configure the device name, IP address, PLC hardware configuration, and communication parameters. Confirm that the controller recognizes the drive and that cyclic process data are exchanged correctly.
Network cabling and topology should follow the relevant Siemens and PROFINET installation recommendations.
The six digital inputs and three digital outputs can be configured for the required control and status functions.
The two analog inputs support selectable voltage or current signals, including -10 to +10 V and 0/4 to 20 mA. Confirm the required DIP-switch settings and parameter configuration before connecting analog signals.
The two analog outputs can be configured for suitable monitoring or control purposes. Use appropriate shielding and grounding practices to minimize interference.
The STO function must be incorporated into a correctly designed safety circuit.
Verify the required safety wiring, configuration, and validation procedures. Confirm the response of the safety system under relevant operating conditions and document the commissioning results.
STO should not be used as a substitute for isolating the electrical supply during maintenance.
Before replacing or servicing a control unit, record the existing drive parameters and network configuration.
Use the supported commissioning tools and memory interfaces to manage parameter data. After replacement, verify the motor-control settings, communication configuration, I/O functions, and safety-related parameters before returning the machine to operation.
The 6AG1244-0BB12-2FA0 operates as part of a modular SINAMICS G120 installation.
| Component | Function | Integration Considerations |
|---|---|---|
| SINAMICS G120 Power Module | Converts electrical power for motor operation | Must be compatible with the CU240E-2 PN |
| Three-phase AC motor | Provides mechanical drive power | Verify voltage, current, power, and load requirements |
| Siemens SIMATIC PLC | Controls machine sequences and drive commands | PROFINET configuration and process data must match |
| PROFINET network | Exchanges commands, status, and diagnostic information | Configure device name, IP address, and network topology |
| HMI panel | Provides operator monitoring and control | Usually integrated through the PLC |
| 24 V DC power supply | Supplies external control power where required | Must meet the specified voltage and current requirements |
| Analog sensors | Provide process measurements | Confirm voltage/current signal type and scaling |
| Digital sensors and switches | Provide machine status and control signals | Match input wiring and signal logic |
| Safety relay or safety PLC | Coordinates safety-related machine functions | STO circuit must be engineered and validated |
| USB commissioning connection | Supports service and parameter access | Use supported Siemens tools and procedures |
| SD/MMC memory medium | Supports parameter and service functions | Verify supported media and configuration procedures |
The table describes typical system components. It does not indicate that these items are included with the control unit.
When replacing the 6AG1244-0BB12-2FA0, the complete product configuration must be compared rather than relying on the CU240E-2 name alone.
| Alternative or Related Model | Description | Replacement Considerations |
|---|---|---|
| 6SL3244-0BB12-1FA0 | Standard SINAMICS G120 CU240E-2 PN base model | Related base hardware; compare environmental protection and operating-temperature specifications |
| 6AG1244-0BB12-2FA0 | SIPLUS G120 CU240E-2 PN | The specified SIPLUS version with conformal coating |
| 6SL3244-0BB12-1PA1 | SINAMICS G120 CU240E-2 DP | PROFIBUS-oriented configuration; not a direct PROFINET substitute |
| 6SL3244-0BB12-1BA1 | SINAMICS G120 CU240E-2 variant | Communication and control configuration must be checked before substitution |
| Other CU240E-2 PN variants | Related G120 control units | Verify firmware, safety functions, I/O, and environmental specifications |
Before selecting an alternative, compare:
A standard CU240E-2 PN and a SIPLUS CU240E-2 PN may share a base design but differ in environmental protection and operating conditions. The replacement must satisfy the actual installation requirements.
The CU240E-2 PN supports communication with Siemens PLCs and other compatible PROFINET automation equipment. This allows drive commands, operating status, and diagnostic information to be exchanged over the industrial network.
The integrated Safe Torque Off function supports machine-safety designs that require the drive to prevent torque generation under defined safety conditions.
Support for V/f control and sensorless vector control allows the drive to be configured for different motor and load characteristics.
Six digital inputs, three digital outputs, two analog inputs, and two analog outputs provide interfaces for local control and process signals.
The conformal coating provides additional protection for electronic assemblies in specified challenging environmental conditions.
These interfaces support commissioning and service workflows, including parameter access and configuration management.
The separate control-unit and Power Module arrangement provides flexibility when configuring drive systems for different electrical and application requirements.
It is a SIPLUS G120 CU240E-2 PN Control Unit designed for SINAMICS G120 drive systems. It manages motor-control functions, I/O signals, PROFINET communication, and supported safety functions.
No. It is a control unit and is supplied without a Power Module. A compatible SINAMICS G120 Power Module is required to create a complete drive configuration.
The 6AG1244-0BB12-2FA0 is the SIPLUS version based on the 6SL3244-0BB12-1FA0. It includes conformal coating and an extended environmental operating specification. The complete environmental and compatibility details should be checked before selecting either version.
The CU240E-2 PN supports PROFINET communication. It can exchange drive commands, process data, status, and diagnostic information with a compatible controller.
It provides six digital inputs, three digital outputs, two analog inputs, and two analog outputs.
Yes. It supports Safety Integrated Safe Torque Off (STO). The safety circuit must be configured, commissioned, and validated according to the applicable safety requirements.
The control unit supports V/f control, including linear and square parameterization, ECO functions, and sensorless vector control. Vector control with an encoder is not supported by this configuration.
The specified external operating voltage range is 20.4 to 28.8 V DC. The control unit can also receive 24 V DC from the Power Module.
The SIPLUS version includes conformal coating and has a specified operating temperature range of -20 to +55 °C. It is designed for additional environmental protection, but its IP20 rating still requires appropriate installation and enclosure protection.
No. The Power Module must be selected separately and must be compatible with the control unit and the intended motor application.
When purchasing the Siemens 6AG1244-0BB12-2FA0, verify the complete order number and confirm that the unit is the SIPLUS CU240E-2 PN version rather than a standard CU240E-2 or a PROFIBUS variant.
Check the PROFINET interface, I/O configuration, safety functionality, conformal coating, and operating-temperature requirements against the installed drive system. Confirm compatibility with the existing SINAMICS G120 Power Module and the PLC hardware configuration.
For replacement projects, obtain the existing control-unit parameters and network settings before removing the original unit. Record the firmware version, device name, IP configuration, motor-control parameters, and safety-related settings where applicable.
During maintenance, inspect the connectors, wiring, enclosure, and ventilation conditions. Keep unused interfaces protected with the specified covers, and follow the manufacturer’s instructions for handling and servicing the control unit.
After replacement, verify PROFINET communication, digital and analog signal behavior, motor-control performance, and the STO safety function. Complete the required commissioning and validation procedures before returning the machine to production.
The Siemens 6AG1244-0BB12-2FA0 SIPLUS G120 CU240E-2 PN Control Unit is a specialized drive-control component for modular SINAMICS G120 systems. It combines PROFINET communication, Safety Integrated STO, V/f and sensorless vector-control functions, and a comprehensive I/O configuration.
Its conformal-coated SIPLUS design provides additional protection for electronic assemblies in specified industrial environments. Since the unit is supplied without a Power Module, correct component matching is essential when designing or maintaining a complete drive system.
For industrial automation applications, the 6AG1244-0BB12-2FA0 provides a control platform for coordinating motor operation, exchanging data with PLC systems, and integrating supported safety functions into a wider machine-control architecture.