Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |

The Siemens 6AG1243-2AA30-7XB0 is a SIPLUS S7-1200 CM 1243-2 communication module designed to connect an AS-Interface (AS-i) network to a SIMATIC S7-1200 programmable logic controller. It functions as an AS-i master, allowing the controller to exchange process data with distributed AS-i sensors, actuators, and other compatible field devices.
AS-Interface is an industrial communication technology designed for connecting field-level devices through a simplified network structure. Instead of requiring individual conventional wiring runs from every field device back to the control cabinet, an AS-i network allows multiple devices to communicate through a shared bus arrangement. This can simplify wiring, reduce installation complexity, and support distributed automation architectures.
The 6AG1243-2AA30-7XB0 belongs to the Siemens SIPLUS product range. It is based on the 3RK7243-2AA30-0XB0 CM 1243-2 communication module and incorporates conformal coating for enhanced protection of electronic components in demanding environmental conditions. Its specified extended operating temperature range is -25°C to +70°C.
Designed for the SIMATIC S7-1200 platform, the module communicates with the controller through the S7-1200 backplane bus. It supports AS-i Specification V3.0 and master profile M4. A single AS-i interface can manage up to 62 AS-i slaves, with a maximum of 496 digital input points and 496 digital output points under the supported configuration.
The module is configured through STEP 7 and provides LED indicators for AS-i, power failure, communication module status, configuration errors, and diagnostics. These indicators help engineers identify operating conditions and simplify troubleshooting during commissioning and maintenance.
The 6AG1243-2AA30-7XB0 is suitable for industrial systems that require communication between an S7-1200 controller and distributed AS-i devices. Typical applications include machine automation, conveyor systems, packaging equipment, assembly lines, and manufacturing installations with distributed digital field devices.
| Parameter | Specification |
|---|---|
| Brand | Siemens |
| Product Series | SIPLUS S7-1200 |
| Model | 6AG1243-2AA30-7XB0 |
| Module Type | CM 1243-2 Communication Module |
| Product Function | AS-Interface Master |
| Base Model | 3RK7243-2AA30-0XB0 |
| Compatible Controller Family | SIMATIC S7-1200 |
| Communication Standard | AS-i Specification V3.0 |
| AS-i Master Profile | M4 |
| Number of AS-i Interfaces | 1 |
| Maximum AS-i Slaves | 62 |
| Maximum Digital Inputs | 496 |
| Maximum Digital Outputs | 496 |
| Maximum Backplane Current Consumption | 250 mA |
| Rated Insulation Voltage | 500 V |
| AS-i Power24V Compatibility | Yes |
| Configuration Software | STEP 7 |
| Data Transmission to CPU | S7-1200 Backplane Bus |
| Status Indicators | AS-i, PF, CM, CER, DIAG |
| Electrical Connection | Screw-Type Connection |
| Mounting Method | 35 mm DIN Rail |
| Protection Rating | IP20 |
| Conformal Coating | Included |
| Operating Temperature Range | -25°C to +70°C, according to specified SIPLUS conditions |
| Dimensions Provided | 30 × 110 × 75 mm |
| Weight Provided | 0.155 kg |
| Application | Distributed AS-i Field Device Communication |
Note: Dimensions and weight are the supplied product-listing values. Verify the physical module dimensions against the applicable mechanical drawing before designing a control cabinet.
The Siemens 6AG1243-2AA30-7XB0 operates as the communication master between an AS-i field network and a SIMATIC S7-1200 PLC. It coordinates communication with connected AS-i slaves and transfers their process information to the controller.
The module manages communication between the PLC and the devices connected to the AS-i network. Each compatible AS-i slave has an assigned address and exchanges data with the master through the network.
The master coordinates the communication process so that field devices can provide input information and receive output commands.
For example, a proximity sensor connected to an AS-i slave can report the presence of a workpiece. The AS-i master transfers this information to the S7-1200 controller, where the PLC program evaluates the signal and determines the next machine operation.
The CM 1243-2 supports access to digital input and output information through the S7-1200 process image and peripheral addresses.
This allows PLC programs to use field-device information in familiar control logic. The controller can process sensor signals, evaluate machine conditions, and send output commands to compatible AS-i actuators.
Analog AS-i data can also be accessed through the supported peripheral and data-record transfer mechanisms. The exact data organization depends on the connected slave devices and the engineering configuration.
The module supports AS-i Specification V3.0 and the M4 master profile. This enables communication with compatible AS-i field devices designed for the supported specification.
The network can accommodate up to 62 AS-i slaves. With the supported data arrangement, the system can provide up to 496 digital input points and 496 digital output points.
Actual network capacity and process-data availability depend on the slave types, addressing, device profiles, and system configuration.
The AS-i network is configured through STEP 7. Engineers can configure the communication module, assign the required parameters, and integrate field-device data into the S7-1200 automation program.
A properly prepared configuration helps ensure that the PLC recognizes connected AS-i devices and processes their data according to the intended machine-control logic.
The module provides LED status indicators for AS-i, PF, CM, CER, and DIAG conditions. These indicators help maintenance personnel assess the module’s operating state and identify communication or configuration problems.
When a network fault occurs, engineers can use the module indicators together with STEP 7 diagnostics and field-device information to narrow down the source of the problem.
The 6AG1243-2AA30-7XB0 extends the communication capabilities of a SIMATIC S7-1200 PLC by providing an AS-i master interface. It allows field-level devices to participate in a centralized automation process without requiring every device to be wired independently to the PLC.
The module is designed for the S7-1200 platform and exchanges data with the CPU through the controller’s backplane bus.
This arrangement allows the PLC program to use AS-i field information alongside other controller data. The PLC can coordinate the connected devices with local digital I/O, analog modules, operator interfaces, and other automation components.
The module should be selected according to the S7-1200 hardware configuration and the number of communication modules permitted by the CPU.
AS-i networks are frequently used to connect proximity switches, position sensors, limit switches, and other field devices.
The CM 1243-2 collects the data supplied by compatible AS-i slaves and makes it available to the PLC. This can reduce the number of individual field wiring connections required between a machine and its control cabinet.
Compatible AS-i output devices can receive control information through the network. The PLC program can use this capability to coordinate indicator devices, switching elements, and other supported actuators.
The module acts as the communication master, while the actual output operation is performed by the connected field device.
In a larger automation installation, the S7-1200 controller may coordinate several machine sections. The AS-i network provides a field-level communication layer for connecting distributed devices within a machine or production cell.
This arrangement can simplify machine wiring and support structured diagnostics and maintenance.
Conveyor systems often contain numerous sensors for detecting product position, monitoring transfer points, and identifying material movement.
An AS-i network can connect compatible field devices along a conveyor line. The CM 1243-2 transfers their data to the S7-1200 controller, allowing the PLC to coordinate conveyor sections, transfer operations, and machine interlocks.
Packaging equipment uses sensors and actuators for product detection, package positioning, machine sequencing, and equipment monitoring.
The module can connect compatible AS-i devices distributed across the machine. The PLC processes their signals and coordinates the packaging sequence.
This can help reduce extensive point-to-point field wiring in machines with multiple sensing and switching locations.
Automated assembly systems often require communication with sensors positioned at different workstations.
The AS-i network can collect signals from compatible position switches, proximity sensors, and other devices. The S7-1200 controller uses these signals to manage workpiece movement, station sequencing, and machine interlocks.
Automotive production lines use distributed field devices throughout material-handling, assembly, and inspection equipment.
The 6AG1243-2AA30-7XB0 can provide the AS-i master interface for suitable S7-1200-based machine sections. It allows compatible field devices to exchange process data with the central PLC.
Manufacturing equipment may include many sensors and actuators distributed across machine frames, operator stations, and auxiliary equipment.
Using an AS-i network can simplify the connection of supported devices and provide a structured way to exchange field-level information with the controller.
The module’s SIPLUS design may also be considered where its specified environmental capabilities are relevant to the installation.
Correct installation is important for reliable AS-i communication and stable PLC operation.
Before installation, confirm that the module is supported by the intended SIMATIC S7-1200 CPU and hardware configuration.
Check the CPU firmware, engineering software version, available module positions, and permitted number of communication modules. The maximum supported communication-module count depends on the CPU configuration.
The module uses snap-on mounting for a standard 35 mm DIN rail. Install it according to the required S7-1200 mounting arrangement and maintain the necessary spacing for wiring and ventilation.
Ensure that the module is firmly secured and that the mounting arrangement does not place unnecessary mechanical stress on its terminals.
The AS-i connection uses screw-type terminals. Connect the network conductors according to the module’s terminal assignment and the applicable AS-i installation instructions.
Check conductor preparation, terminal tightness, polarity requirements, grounding arrangements, and cable routing. The AS-i network should be installed using suitable cable and components for the intended application.
Add the CM 1243-2 to the S7-1200 hardware configuration and configure the AS-i network.
The engineering process includes defining the network parameters, configuring connected slave devices, and assigning the required process-data addresses.
After downloading the configuration, verify that the controller recognizes the module and that the expected field-device data is available to the PLC program.
The module receives its operating supply through the S7-1200 backplane bus. Its maximum backplane current consumption is specified as 250 mA.
Confirm that the selected CPU and system configuration can support the required module power consumption. The AS-i network power arrangement should also be designed according to the connected devices and applicable AS-i requirements.
The SIPLUS version includes conformal coating and is specified for an extended temperature range of -25°C to +70°C under the applicable installation conditions.
Its IP20 rating means that the module requires suitable protection against water, dust, and mechanical contamination. Install it in an appropriate control cabinet and follow the manufacturer’s environmental and mounting instructions.
After installation, inspect the wiring and verify that the module powers up normally.
Check the AS-i status indicators and confirm that the configured slave devices are recognized. Test digital input and output data through the PLC program and confirm that the expected signals are exchanged correctly.
Record the network configuration and device addresses for future maintenance.
The Siemens 6AG1243-2AA30-7XB0 is designed to operate within a SIMATIC S7-1200 automation system and an AS-i field network.
| Component | Function | Integration Considerations |
|---|---|---|
| SIMATIC S7-1200 CPU | Main PLC controller | Verify CPU compatibility and communication-module capacity |
| CM 1243-2 | AS-i master communication module | Provides the AS-i interface for the controller |
| AS-i power supply | Supplies the AS-i network | Select according to network requirements and connected devices |
| AS-i slave modules | Connect distributed field devices | Verify AS-i V3.0 compatibility and supported profiles |
| Proximity sensors | Detect objects and positions | Confirm the sensor’s electrical interface and slave compatibility |
| Limit switches | Provide machine-position information | Verify device addressing and process-data configuration |
| AS-i actuators | Perform switching or control operations | Confirm supported output functions and device profiles |
| STEP 7 engineering software | Configures the PLC and communication module | Use a compatible engineering environment |
| 35 mm DIN rail | Mechanical mounting | Follow the specified mounting arrangement |
| Control cabinet | Provides equipment protection | Maintain IP20 environmental protection requirements |
These components represent a typical system architecture. They are not necessarily supplied with the communication module.
When replacing the 6AG1243-2AA30-7XB0, engineers should distinguish between the standard CM 1243-2 and the SIPLUS version.
The SIPLUS model is based on the 3RK7243-2AA30-0XB0 and includes conformal coating and an extended environmental specification. A standard module may provide similar communication functions but may not offer identical environmental protection.
| Related Model or Option | Description | Replacement Considerations |
|---|---|---|
| Siemens 3RK7243-2AA30-0XB0 | Standard CM 1243-2 AS-i master | Check environmental requirements and hardware configuration |
| Siemens 6AG1243-2AA30-7XB0 | SIPLUS CM 1243-2 AS-i master | Original SIPLUS configuration |
| Siemens CM 1243-5 | PROFIBUS DP master communication module | Different communication protocol and network function |
| Siemens CM 1241 | Serial communication module | Used for supported serial interfaces, not as an AS-i master |
| Other AS-i master solutions | Alternative AS-i network integration hardware | Requires a review of PLC compatibility, addressing, and software architecture |
A replacement should be evaluated according to:
A module with a similar product description is not necessarily a direct replacement. Verify the complete order number and technical documentation before installation.
The module provides an AS-Interface master connection for SIMATIC S7-1200 controllers, enabling communication with compatible distributed field devices.
Its support for AS-i Specification V3.0 and master profile M4 allows it to work with compatible AS-i slave devices.
The module supports up to 62 AS-i slaves and a maximum of 496 digital inputs and 496 digital outputs under the supported configuration.
Communication with the controller takes place through the S7-1200 backplane bus, allowing field data to be incorporated into the PLC application.
The module can be configured through STEP 7, supporting structured hardware configuration and integration into the S7-1200 engineering environment.
The conformal coating and extended temperature specification make this version suitable for installations requiring the documented SIPLUS environmental characteristics.
LED indicators for AS-i, PF, CM, CER, and DIAG conditions provide useful information during commissioning and troubleshooting.
The snap-on 35 mm DIN rail mounting arrangement supports installation in standard industrial control cabinets.
It is a SIPLUS S7-1200 CM 1243-2 communication module that functions as an AS-Interface master. It connects an AS-i field network to a SIMATIC S7-1200 PLC.
The CM 1243-2 is an AS-Interface master for connecting AS-i field devices. The CP 1243-1 is an Ethernet communication processor used for additional Ethernet connectivity and supported telecontrol functions. They serve different communication purposes.
The 6AG1243-2AA30-7XB0 supports AS-i Specification V3.0 and master profile M4.
The module supports a maximum of 62 AS-i slaves. The actual configuration depends on the connected device types, addressing, and network design.
The documented maximum is 496 digital inputs and 496 digital outputs. The available process data depends on the connected slaves and their configuration.
It is designed for the Siemens SIMATIC S7-1200 PLC family. The exact CPU and hardware configuration should be checked before installation.
The AS-i interface is configured through STEP 7. Engineers use the engineering environment to configure the communication module, connected devices, and data exchange with the PLC.
Yes. The 6AG1243-2AA30-7XB0 is a SIPLUS version based on 3RK7243-2AA30-0XB0 and includes conformal coating.
The SIPLUS product specification identifies an extended temperature range of -25°C to +70°C. The applicable operating conditions depend on the mounting orientation and installation requirements.
Verify the complete order number, module condition, S7-1200 compatibility, AS-i V3.0 support, environmental specification, terminal condition, and included accessories. For a SIPLUS installation, confirm that the replacement provides the environmental protection required by the application.
When purchasing the Siemens 6AG1243-2AA30-7XB0, verify that the product is the SIPLUS CM 1243-2 AS-Interface master rather than another S7-1200 communication module. The distinction is important because the CM 1243-2 provides AS-i master functionality, while other communication modules may use entirely different protocols.
For replacement projects, check the full order number and inspect the product label. Confirm the conformal coating specification, terminal condition, mounting components, and module version. If the module is used in an existing AS-i installation, compare its network configuration and slave-device requirements with the original system.
During maintenance, monitor the module’s diagnostic indicators and inspect the AS-i wiring and terminals. Loose connections, damaged cables, incorrect slave addressing, and configuration mismatches can interrupt communication.
Keep an updated record of the AS-i slave addresses, device profiles, PLC process-data assignments, and STEP 7 configuration. This documentation can significantly reduce troubleshooting time when a field device or communication module needs to be replaced.
For installations operating in demanding environmental conditions, maintain the cabinet’s temperature and contamination controls. The SIPLUS conformal coating provides additional protection, but it does not eliminate the need for correct enclosure design and maintenance.
The Siemens 6AG1243-2AA30-7XB0 SIPLUS S7-1200 CM 1243-2 is an AS-Interface master communication module designed to connect distributed AS-i field devices to SIMATIC S7-1200 controllers. It supports AS-i Specification V3.0, master profile M4, up to 62 AS-i slaves, and a maximum of 496 digital inputs and 496 digital outputs under the supported configuration.
Its conformal coating, extended temperature specification, STEP 7 configuration, diagnostic LEDs, and DIN rail mounting make it a specialized communication component for industrial automation systems requiring AS-i network integration.
For maintenance, expansion, or replacement projects, engineers should verify the exact order number, PLC compatibility, AS-i network configuration, and environmental requirements to ensure reliable communication and long-term system operation.