Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |

The Siemens 6AG1242-5DX30-2XE0 SIPLUS S7-1200 CM 1242-5 Communication Module is an industrial communication module designed to connect SIMATIC S7-1200 controllers to PROFIBUS networks as DP slave devices. It provides a communication interface between an S7-1200 automation controller and a PROFIBUS-based control system, allowing process data to be exchanged with a PROFIBUS DP master.
This module belongs to the Siemens SIPLUS product range, which is designed for applications involving more demanding environmental conditions. Based on the standard Siemens CM 1242-5 communication module, the 6AG1242-5DX30-2XE0 incorporates conformal coating and an extended operating temperature specification. These characteristics make it suitable for selected industrial installations where temperature variation and exposure to environmental substances require additional consideration.
The CM 1242-5 operates as a PROFIBUS DP slave. It does not function as a PROFIBUS master, and it is not an Industrial Ethernet communication module. Its communication interface uses a 9-pin Sub-D socket with an RS485 electrical connection. The supported PROFIBUS transmission rate ranges from 9.6 kbit/s to 12 Mbit/s.
In a typical automation application, the S7-1200 CPU performs control logic while the CM 1242-5 handles communication with a higher-level PROFIBUS DP master. Process data can be exchanged between the controller and the master, supporting coordination between PLC systems, distributed automation equipment, and industrial processes.
The module’s compact single-width design makes it suitable for installation alongside an S7-1200 CPU and other compatible system components. It supports 35 mm DIN-rail mounting and can also be mounted on a wall according to the installation requirements.
For engineers maintaining Siemens automation systems, the 6AG1242-5DX30-2XE0 provides a specialized PROFIBUS communication option for S7-1200 applications in environments where the standard product configuration may not provide the desired environmental characteristics.
| Parameter | Specification |
|---|---|
| Brand | Siemens |
| Product Range | SIPLUS |
| Model | 6AG1242-5DX30-2XE0 |
| Product Type | Communication Module |
| Product Designation | SIPLUS S7-1200 CM 1242-5 |
| Based On | 6GK7242-5DX30-0XE0 |
| Compatible Controller Family | SIMATIC S7-1200 |
| Communication Protocol | PROFIBUS DP |
| Device Role | DP Slave |
| PROFIBUS Modes | DPV0 and DPV1 |
| Transmission Rate | 9.6 kbit/s to 12 Mbit/s |
| Physical Interface | RS485 |
| Electrical Connector | 9-pin Sub-D socket |
| Industrial Ethernet Interface | None |
| Backplane Bus Supply | 5 V DC |
| Typical Current Consumption | 0.15 A |
| Power Loss | 0.75 W |
| Maximum Modules per CPU | 3 |
| Conformal Coating | Included |
| Operating Temperature | -25°C to +55°C, depending on installation orientation |
| Protection Rating | IP20 |
| Module Format | S7-1200 compact, single-width |
| Mounting | 35 mm DIN rail or wall mounting |
| Dimensions | 30 × 100 × 75 mm |
| Weight | 0.115 kg |
The main function of the Siemens 6AG1242-5DX30-2XE0 is to provide PROFIBUS DP slave communication for a SIMATIC S7-1200 controller. It allows the controller to exchange process information with a PROFIBUS DP master through an RS485 communication interface.
PROFIBUS DP is a fieldbus communication protocol widely used in industrial automation. It supports cyclic data exchange between a master controller and connected slave devices.
When the CM 1242-5 is installed with an S7-1200 CPU, the communication module provides the physical and protocol interface needed for the controller to participate as a DP slave.
The master initiates communication and manages the exchange of configured process data. The S7-1200 controller processes the received information and updates its control logic according to the application program.
This arrangement allows an S7-1200 system to become part of a larger PROFIBUS automation network without requiring the S7-1200 CPU itself to provide the PROFIBUS slave interface.
The CM 1242-5 supports PROFIBUS DPV0 and DPV1 functionality.
DPV0 provides the basic cyclic data exchange used in many distributed automation applications. It allows the master and slave to exchange process information during normal operation.
DPV1 extends the communication capabilities with additional acyclic services. These services can be used for parameter access, diagnostic information, and other supported communication functions.
The actual services available depend on the configuration, controller firmware, engineering software, and the connected PROFIBUS master.
The module uses an RS485-based PROFIBUS interface with a 9-pin Sub-D socket.
RS485 is designed for differential signal transmission and is widely used in industrial communication networks. Its electrical characteristics support reliable data transmission over properly designed bus segments.
The communication speed can range from 9.6 kbit/s to 12 Mbit/s. The selected speed must be supported by all devices on the PROFIBUS network and configured consistently.
Correct cable selection, connector installation, bus termination, and network topology are important for stable communication.
Once the module has been configured and connected to a PROFIBUS DP master, it can exchange input and output process data with the master.
The master can send output information to the S7-1200 system, while the controller can provide input information back to the master. This supports coordination between different control levels and distributed equipment.
The documented total data volume for the DP slave input and output address areas is up to 240 bytes each, subject to the applicable configuration and system limits.
The 6AG1242-5DX30-2XE0 is a SIPLUS version based on the standard 6GK7242-5DX30-0XE0 communication module.
It includes conformal coating and an extended environmental specification. The operating temperature range is -25°C to +55°C, with the permitted upper temperature depending on whether the module is installed vertically or horizontally.
The coating provides additional protection for electronic assemblies against specified environmental influences. It should not be interpreted as permission to expose the module to unrestricted moisture, chemical contamination, or improper installation conditions.
The 6AG1242-5DX30-2XE0 provides a communication link between an S7-1200 controller and a PROFIBUS-based automation network. Its role is especially relevant when an S7-1200 system must exchange information with an existing PROFIBUS master or participate in a distributed control architecture.
The module is designed for use with the SIMATIC S7-1200 controller family. It is installed as a communication expansion module and receives its operating supply through the controller’s backplane bus.
The CPU executes the application program, while the CM 1242-5 manages the PROFIBUS slave communication function.
This separation allows the controller to perform machine or process logic while communicating with other automation equipment through a dedicated fieldbus interface.
A PROFIBUS DP master controls the communication cycle and exchanges configured data with the connected slave devices.
The CM 1242-5 enables the S7-1200 to participate as one of these slave devices. The master may be part of a larger PLC system, distributed control architecture, or industrial automation network.
Before integration, engineers must confirm that the master supports the required PROFIBUS functions and that the network configuration matches the slave settings.
Industrial facilities frequently contain equipment from different control platforms. PROFIBUS can provide a common communication network for exchanging process information between these systems.
The CM 1242-5 allows an S7-1200 controller to exchange data with a compatible PROFIBUS master, supporting coordination between machine-level control and higher-level automation equipment.
Communication diagnostics are important for maintaining reliable fieldbus operation. The module supports diagnostic information through the Siemens engineering environment.
Engineers can use STEP 7 to configure the communication connection and investigate available diagnostic information, including the module’s operating condition and communication status.
This helps maintenance personnel distinguish between configuration problems, physical network faults, and issues involving connected equipment.
The Siemens 6AG1242-5DX30-2XE0 is suitable for S7-1200 automation systems that require PROFIBUS DP slave connectivity and additional environmental protection.
Manufacturing facilities often use PROFIBUS networks to connect PLC systems with distributed automation equipment.
An S7-1200 controller equipped with the CM 1242-5 can exchange process data with a PROFIBUS DP master, allowing it to participate in a larger factory-control structure.
Typical applications include machine coordination, production-line monitoring, and communication between different automation stations.
Individual machines may use S7-1200 controllers for sequence control, motor coordination, sensor processing, and actuator management.
Where the machine must communicate with a PROFIBUS-based supervisory controller, the CM 1242-5 can provide the required slave interface.
This is useful when integrating a new machine into an existing PROFIBUS installation.
Some industrial process installations use PROFIBUS to exchange operating data between local controllers and centralized automation systems.
The module can provide the communication connection for an S7-1200 controller that monitors or controls part of the process.
The suitability of the module depends on the process architecture, communication requirements, and environmental conditions.
The SIPLUS version is intended for applications involving more demanding environmental conditions than those normally associated with standard control-cabinet installations.
Its conformal coating and extended temperature specification can be beneficial in suitable industrial environments, including installations exposed to specified chemically or mechanically active substances.
The installation must still comply with the product’s environmental limits and enclosure requirements.
In a distributed automation architecture, different PLCs and equipment stations may be responsible for individual sections of a production process.
The CM 1242-5 enables an S7-1200 controller to exchange configured data with a PROFIBUS DP master, helping connect local machine functions with the wider control system.
Water treatment, ventilation, pumping, and other utility installations may use PROFIBUS-based control networks.
An S7-1200 system can perform local control functions while exchanging selected process information with a central controller through the CM 1242-5.
The exact application depends on the required data exchange, environmental conditions, and network design.
Correct installation and configuration are essential for reliable PROFIBUS communication and stable operation of the S7-1200 system.
Before installation, confirm that the selected S7-1200 CPU supports the CM 1242-5 and that the controller firmware and engineering software are compatible with the module.
The product is based on the standard 6GK7242-5DX30-0XE0 CM 1242-5. However, the SIPLUS version has additional environmental characteristics that should be considered separately.
The module has a compact single-width design with dimensions of 30 × 100 × 75 mm.
It supports installation on a standard 35 mm DIN rail and can also be wall-mounted according to the manufacturer’s mounting instructions.
Allow sufficient space for wiring access, ventilation, and maintenance. Ensure that the module is installed in the correct orientation for the intended operating temperature specification.
The communication interface uses a 9-pin Sub-D socket with an RS485 electrical connection.
Use a PROFIBUS-compatible cable and connector. Confirm the pin assignment and cable shielding requirements before wiring.
For a reliable network, maintain the correct bus topology and termination arrangement. Incorrect termination, loose connectors, or damaged cables can cause intermittent communication or complete network failure.
Configure the CM 1242-5 in the Siemens engineering environment and assign the required PROFIBUS parameters.
The configuration should include the appropriate device identification, address, data exchange arrangement, and master-side settings.
The PROFIBUS master and slave must use compatible communication settings. Any mismatch in configured data areas or network parameters may prevent successful data exchange.
STEP 7 is used to configure the communication functions and integrate the module into the S7-1200 project.
The engineering configuration should reflect the actual network architecture, including the PROFIBUS master, slave address, and required process data.
After downloading the project, check the module’s operating status and available diagnostic information.
The SIPLUS module has an extended operating temperature specification of -25°C to +55°C, depending on installation orientation.
Although conformal coating provides additional protection for electronic components, the module must still be installed within its specified environmental limits.
Protect the module from direct water exposure, improper chemical contact, and conditions outside the published product specifications.
After installation, inspect the mechanical mounting, communication connector, cable shielding, and network termination.
Verify that the PROFIBUS master recognizes the S7-1200 slave and that the configured input and output data are exchanged correctly.
Check diagnostic information during commissioning and confirm that the system returns to normal operation after a controlled power cycle.
The 6AG1242-5DX30-2XE0 is designed for use within a SIMATIC S7-1200 automation system and a PROFIBUS DP network.
| Component | Function | Integration Considerations |
|---|---|---|
| SIMATIC S7-1200 CPU | Executes PLC control logic | Confirm CPU compatibility and firmware requirements |
| CM 1242-5 | Provides PROFIBUS DP slave communication | This is the communication function of the 6AG1242-5DX30-2XE0 |
| PROFIBUS DP master | Controls cyclic communication with the slave | Verify master compatibility and configuration |
| PROFIBUS cable | Carries RS485 communication signals | Use suitable PROFIBUS cable and correct shielding |
| 9-pin Sub-D connector | Provides the physical bus connection | Confirm pin assignment and termination |
| STEP 7 | Configures and diagnoses the automation system | Use a compatible engineering software version |
| SIMATIC HMI | Provides operator visualization | HMI communication depends on the wider system architecture |
| Industrial control cabinet | Protects and houses automation equipment | Maintain appropriate environmental and installation conditions |
The listed components are examples of equipment used in a complete automation installation. They are not necessarily included with the communication module.
When replacing the 6AG1242-5DX30-2XE0, the communication role and environmental characteristics should be considered together.
| Model | Product Description | Replacement Considerations |
|---|---|---|
| 6GK7242-5DX30-0XE0 | Standard SIMATIC S7-1200 CM 1242-5 | Similar PROFIBUS DP slave communication function, but without the same SIPLUS environmental configuration |
| 6AG1242-5DX30-2XE0 | SIPLUS S7-1200 CM 1242-5 | Extended environmental specification and conformal coating |
| 6GK7243-5DX30-0XE0 | SIMATIC S7-1200 CM 1243-5 | PROFIBUS DP master module; it performs a different network role |
| 6AG1243-5DX30-2XE0 | SIPLUS S7-1200 CM 1243-5 | SIPLUS PROFIBUS DP master option, not a direct slave-module replacement |
| Other S7-1200 communication modules | Communication expansion options | Must be evaluated according to protocol, network role, and system architecture |
The standard CM 1242-5 and SIPLUS CM 1242-5 share the same basic communication role, but their environmental specifications are different.
A CM 1243-5 is a PROFIBUS master module and should not be treated as a direct replacement for the CM 1242-5 slave module.
Before selecting an alternative, check the following:
The module enables an S7-1200 controller to participate in an existing PROFIBUS network as a DP slave.
Support for both communication modes provides flexibility for cyclic process-data exchange and additional acyclic services.
The supported PROFIBUS transmission rate of 9.6 kbit/s to 12 Mbit/s allows the module to be used in networks with different communication-speed requirements.
The conformal coating and extended operating temperature specification make the module suitable for selected industrial environments with more demanding conditions.
Its single-width S7-1200 format allows installation alongside compatible controller components without requiring a large amount of additional panel space.
The 9-pin Sub-D RS485 interface provides a familiar physical connection for PROFIBUS installations.
The Siemens engineering environment provides configuration and diagnostic functions that help engineers commission and maintain the communication system.
It is a SIPLUS S7-1200 CM 1242-5 communication module designed to connect a SIMATIC S7-1200 controller to PROFIBUS as a DP slave.
The CM 1242-5 is designed for PROFIBUS DP slave operation, while the CM 1243-5 is designed for PROFIBUS DP master operation. They perform different communication roles and are not direct substitutes.
The module supports PROFIBUS DP, including DPV0 and DPV1 functionality.
The supported PROFIBUS transmission rate ranges from 9.6 kbit/s to 12 Mbit/s.
It uses one 9-pin Sub-D socket with an RS485 electrical interface. It does not provide an Industrial Ethernet interface.
The SIPLUS specification is -25°C to +55°C. The permitted upper operating temperature depends on installation orientation, so the applicable Siemens technical data should be checked during panel design.
The coating provides additional protection for electronic assemblies against specified environmental influences. It is part of the SIPLUS environmental design and does not eliminate the need to follow the product’s installation and environmental requirements.
Yes. It is specifically designed for the SIMATIC S7-1200 controller family. Confirm the supported CPU, firmware, and engineering configuration before installation.
Siemens STEP 7 engineering software is used to configure the S7-1200 communication system. The required version depends on the project and the supported module functions.
The published technical specification lists a maximum of three units per CPU, subject to the applicable S7-1200 system configuration.
When purchasing the Siemens 6AG1242-5DX30-2XE0, verify the complete order number rather than relying only on the description CM 1242-5. The SIPLUS version has specific environmental characteristics that distinguish it from the standard 6GK7242-5DX30-0XE0 module.
For replacement projects, confirm the existing S7-1200 CPU model, firmware, PROFIBUS master configuration, slave address, and required data exchange areas. A standard CM 1242-5 may provide similar communication functionality, but it does not automatically provide the same environmental specification as the SIPLUS version.
Before installation, inspect the module housing, connector, mounting points, and visible condition of the electronic assembly. Confirm that the conformal coating and product identification correspond to the expected SIPLUS configuration.
During operation, monitor communication diagnostics and investigate recurring bus errors. Common areas to inspect include cable shielding, connector wiring, bus termination, network topology, and inconsistent master-slave configuration.
For long-term maintenance, keep a record of the module order number, controller configuration, PROFIBUS address, engineering project, and replacement history. This information can reduce commissioning time when a communication module needs to be replaced.
The Siemens 6AG1242-5DX30-2XE0 SIPLUS S7-1200 CM 1242-5 is a PROFIBUS communication module designed to connect SIMATIC S7-1200 controllers to a PROFIBUS DP network as slave devices. It supports DPV0 and DPV1 communication, transmission rates from 9.6 kbit/s to 12 Mbit/s, and an RS485 interface through a 9-pin Sub-D socket.
Its conformal coating and extended environmental specification distinguish it from the standard CM 1242-5 configuration. With compact dimensions of 30 × 100 × 75 mm and a weight of 0.115 kg, it is designed for integration into S7-1200 control systems where PROFIBUS connectivity and additional environmental protection are required.
For industrial procurement, installation, and maintenance, verifying the exact SIPLUS order number, CPU compatibility, network role, and environmental requirements is essential for reliable system operation.