Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |

The Schneider Electric TSXSCY21601 Communication Module is a multiprotocol serial communication module designed for the Modicon Premium and Atrium programmable logic controller platforms. It provides an isolated RS-485 communication interface and a PCMCIA card slot, allowing compatible PLC systems to exchange data with industrial devices and external communication equipment.
In industrial automation, communication modules connect controllers with field devices, supervisory systems, remote equipment, and other control-system components. Reliable data exchange allows a PLC to receive operating information, transmit commands, and coordinate different parts of a production process.
The TSXSCY21601 provides two communication channels. Its built-in channel supports multiprotocol serial communication through an isolated RS-485 interface. The second channel accommodates a PCMCIA Type III communication card, which can provide additional communication capabilities depending on the card installed.
The module supports asynchronous transmission using RTU and ASCII frame formats. Its documented transmission rate ranges from 1.2 to 19.2 kbit/s. In Modbus applications, the supported bus length can reach 1,300 meters under the specified network conditions, with a maximum of 28 devices.
The TSXSCY21601 is intended for installations using compatible Modicon Premium or Atrium processors and associated programming environments. Engineers should check the processor software version, communication protocol, card type, and existing network configuration before installing or replacing the module.
As an established component of a legacy PLC platform, this communication module remains relevant to industrial maintenance, spare-parts procurement, and modernization projects involving existing Modicon Premium installations.
| Parameter | Specification |
|---|---|
| Brand | Schneider Electric |
| Product Model | TSXSCY21601 |
| Product Type | Communication Module |
| Product Family | Modicon Premium |
| Compatible PLC Platforms | Modicon Premium / Atrium |
| Software Designation | Unity Pro |
| Communication Architecture | Heterogeneous industrial bus |
| Access Method | Master/Slave |
| Built-in Communication Interface | Isolated RS-485 |
| Integrated Serial Connector | 1 × SUB-D 25 |
| Expansion Interface | 1 × PCMCIA Type III card slot |
| Communication Protocol | Multiprotocol |
| Transmission Mode | Asynchronous, baseband |
| Transmission Frame | RTU / ASCII |
| Transmission Rate | 1.2–19.2 kbit/s |
| Transmission Medium | Two twisted shielded pairs |
| Maximum Modbus Bus Length | 1,300 m |
| Maximum Number of Devices | 28 |
| Address Range | 0–97 |
| Maximum Tap Link Length | 15 m |
| Maximum Request Size | 120 words / 1,920 bits |
| CRC | CRC-16 |
| Current Consumption | 350 mA at 5 V DC |
| Diagnostic Functions | Event counters and diagnostic counters |
| Dimensions Provided | 55 × 180 × 260 mm |
| Weight | 0.36 kg |
| Product Lifecycle | Discontinued |
| Recommended Replacement | BMXNOM0200 |
Dimensions are retained from the supplied product information. Confirm the physical dimensions and connector clearance against the actual module and rack arrangement before installation.
The TSXSCY21601 provides serial communication capabilities for compatible PLC systems. It enables the controller to exchange information with external devices using supported protocols and communication hardware.
The module includes an isolated RS-485 serial communication channel. RS-485 is widely used in industrial environments because it supports differential signal transmission and can connect multiple devices through a shared communication network.
The built-in channel can be used in compatible Modbus, Uni-Telway, and character-mode applications, subject to the system configuration and software support.
Electrical isolation helps separate the communication interface from certain electrical disturbances on the connected network. Correct grounding, cable shielding, and wiring practices are still necessary for reliable operation.
The TSXSCY21601 supports multiple communication protocols through its built-in channel and compatible PCMCIA communication cards.
The protocol selected depends on the connected equipment and the installed communication hardware. This flexibility allows the module to participate in different serial communication arrangements within an existing automation system.
Before commissioning, engineers should confirm the protocol, communication mode, transmission parameters, and device addressing used by every connected node.
The module provides a slot for a PCMCIA Type III communication card. This second channel allows compatible cards to extend the communication functions available to the PLC.
Depending on the installed card, the system may support additional serial or network communication options. The PCMCIA slot does not mean that every communication protocol is available automatically. The correct card, software configuration, and external cabling must be selected.
The module supports asynchronous serial transmission using RTU and ASCII frame formats.
In Modbus applications, devices exchange information through structured requests and responses. The controller can read data, write values, and coordinate operations with compatible slave devices.
CRC-16 checking is used for frame error detection in applicable communication arrangements. This helps identify corrupted data during transmission, although it cannot prevent all communication faults.
The TSXSCY21601 includes event counters and diagnostic counters. These functions help maintenance personnel evaluate communication activity and investigate network problems.
The module also provides local status indication for module operation, internal errors, and communication activity. These indicators can help technicians distinguish between a module fault and a problem involving the external communication network.
The TSXSCY21601 acts as a communication interface within a Modicon Premium PLC system. It helps connect the controller to field devices and other equipment that use compatible serial communication protocols.
A PLC normally performs logic execution, sequencing, and process control. A communication module extends the controller’s ability to exchange information with external systems.
The TSXSCY21601 provides serial interfaces that allow compatible devices to communicate with the PLC. This can be useful in installations where the controller needs to exchange data with several instruments or equipment units.
Modbus is commonly used in industrial automation for exchanging register values and device status information.
When configured as a Modbus master, the PLC can request data from compatible slave devices. Depending on the application, these values may include process measurements, operating status, alarms, or equipment parameters.
The module’s supported network length and device capacity make it suitable for certain distributed serial communication arrangements. Actual network performance depends on cable quality, topology, device response time, and transmission settings.
Many industrial facilities continue to operate established PLC systems because their machinery and production processes remain functional.
The TSXSCY21601 can help maintain communication with compatible equipment in these installations. Retaining the original communication architecture may reduce the need for extensive wiring changes during routine maintenance.
For modernization projects, engineers can evaluate whether existing serial devices should remain connected through a compatible interface or be migrated to a newer communication platform.
A supervisory control system can collect operating data from PLCs and display process conditions to operators.
The TSXSCY21601 supports the serial communication arrangements used by compatible control systems. The complete supervisory connection depends on the PLC configuration, communication protocol, and any intermediate gateway or network equipment.
The TSXSCY21601 can be used in industrial automation systems that require serial communication between a Modicon Premium or Atrium PLC and compatible external equipment.
Manufacturing lines often contain multiple machines, sensors, controllers, and monitoring devices. Serial communication allows compatible equipment to exchange status and process information with a central PLC.
The TSXSCY21601 can support communication with devices using the module’s supported protocols and configured interfaces.
Process-control installations may use distributed instruments and equipment that communicate through serial networks.
A compatible PLC can collect measurement data, monitor operating conditions, and coordinate process sequences. The TSXSCY21601 provides the communication interface required for supported serial arrangements.
Water treatment facilities use PLC systems to monitor pumps, valves, flow instruments, and other process equipment.
Where compatible Modbus devices are installed, the TSXSCY21601 can provide a serial communication path for exchanging process values and equipment status.
The actual network design must account for cable routing, environmental conditions, electrical isolation, and communication distance.
Industrial utility systems may contain controllers, meters, and monitoring equipment that use serial protocols.
The module can be used in compatible PLC installations to exchange operating information with these devices. Correct protocol configuration and device addressing are essential for stable communication.
The module is particularly relevant to facilities maintaining existing Modicon Premium and Atrium installations.
It can serve as a replacement component when the original communication module fails or when a system requires restoration of its existing serial communication functions.
Before replacement, engineers should confirm the original module’s hardware configuration, PCMCIA card, software settings, and network wiring.
Proper installation and configuration are essential for reliable serial communication.
Confirm that the TSXSCY21601 is supported by the installed Modicon Premium or Atrium controller.
Check the processor model, software version, rack configuration, and applicable hardware documentation. Legacy PLC systems may have specific compatibility requirements that differ between processor generations.
Install the module in a compatible rack position according to the system configuration and Schneider Electric installation instructions.
Before handling the module, follow the required electrical isolation and electrostatic-discharge precautions. Ensure that the module is correctly seated and secured.
The built-in channel uses an isolated RS-485 interface. Select appropriate twisted shielded-pair cable and follow the recommended network topology.
Pay attention to:
Incorrect wiring or inconsistent communication settings can prevent devices from exchanging data.
Select the protocol required by the connected devices and configure the corresponding communication parameters.
For Modbus applications, verify master/slave roles, device addresses, RTU or ASCII frame settings, transmission rate, and request configuration.
The communication settings must match the connected devices. A mismatch in baud rate, parity, addressing, or frame format may result in communication timeouts or invalid responses.
If the second communication channel is required, verify that the installed PCMCIA Type III card is compatible with the TSXSCY21601.
Different cards support different communication functions. Check the card model, supported protocol, external connector, cable requirements, and software configuration before installation.
After installation, check the module’s RUN, ERR, and communication indicators.
Confirm that the PLC recognizes the module and that the connected devices respond correctly. Review diagnostic counters and event information when troubleshooting communication interruptions.
Record the final protocol settings, device addresses, and network wiring information for future maintenance.
The TSXSCY21601 is designed for use in compatible Modicon Premium and Atrium automation systems.
| Component | Function | Integration Considerations |
|---|---|---|
| Modicon Premium PLC CPU | Executes control logic and manages system operations | Verify processor and software compatibility |
| Modicon Atrium Controller | Provides compatible PLC processing functions | Confirm hardware and firmware support |
| Modicon Premium Rack | Holds the PLC CPU and associated modules | Check rack configuration and module position |
| PCMCIA Type III Communication Card | Extends communication capabilities | Verify exact card model and supported protocol |
| RS-485 Field Devices | Exchange data with the PLC | Confirm protocol, addressing, and wiring |
| Modbus Instruments | Provide measurements and equipment status | Match RTU/ASCII settings and master/slave configuration |
| Twisted Shielded-Pair Cable | Carries serial communication signals | Follow cable, shielding, and grounding requirements |
| PLC Programming Software | Configures and maintains the PLC application | Confirm project and software-version compatibility |
| Industrial Power Supply | Supplies the PLC rack and installed modules | Verify rack power capacity and module consumption |
The listed components describe possible system elements. They are not necessarily included with the TSXSCY21601 module.
Schneider Electric identifies the BMXNOM0200 Modicon X80 serial link module as the recommended replacement for the TSXSCY21601.
However, the BMXNOM0200 should not be treated as a direct plug-in replacement. It belongs to a different automation platform and may require changes to the rack, PLC hardware, software configuration, communication wiring, and control application.
| Alternative Model | Description | Replacement Considerations |
|---|---|---|
| BMXNOM0200 | Modicon X80 serial link module with two RS-485/RS-232 ports | Manufacturer-recommended replacement; requires platform and system compatibility review |
| TSXSCY21601 | Original Modicon Premium multiprotocol communication module | Appropriate reference for like-for-like maintenance |
| TSXSCY11601 | Related Modicon Premium RS-485 communication module | Different communication functions and device capacity; not an automatic substitute |
| Compatible PCMCIA Communication Cards | Expansion cards for the TSXSCY21601 | Select according to the required protocol and external interface |
Before choosing a replacement, evaluate the PLC platform, supported communication protocols, number of connected devices, serial interface requirements, cable topology, and software migration needs.
The module supports multiple communication protocols, providing flexibility for compatible Modicon Premium and Atrium installations.
The built-in isolated RS-485 channel supports industrial serial communication and helps separate the communication interface from certain electrical disturbances.
The PCMCIA Type III slot allows compatible communication cards to extend the module’s communication functions.
The documented Modbus configuration supports up to 28 devices, allowing compatible equipment to exchange data through a shared serial network.
The specified Modbus bus length can reach 1,300 meters under appropriate network conditions, making the module suitable for certain distributed industrial installations.
Event counters, diagnostic counters, and local status indicators provide useful information for commissioning and maintenance.
The TSXSCY21601 supports existing Modicon Premium and Atrium systems, helping facilities maintain legacy automation infrastructure.
The TSXSCY21601 is a multiprotocol communication module for Modicon Premium and Atrium PLC platforms. It provides an isolated RS-485 serial interface and a PCMCIA Type III expansion slot.
It is designed for compatible Modicon Premium and Atrium systems. The exact processor, software version, rack configuration, and communication hardware should be checked before installation.
Its built-in communication channel supports multiprotocol serial communication, including compatible Modbus, Uni-Telway, and character-mode configurations. The PCMCIA channel depends on the installed communication card.
The documented transmission rate is 1.2 to 19.2 kbit/s. The selected rate must match the configuration of the connected devices.
The published specification lists support for up to 28 devices in the relevant communication configuration. The actual network capacity depends on the protocol, topology, addressing, and connected equipment.
The specified Modbus bus length can reach 1,300 meters. Actual performance depends on cable characteristics, network layout, electrical conditions, and installation practices.
Yes. It includes one PCMCIA Type III card slot. The communication functions available through this channel depend on the compatible card installed.
The specified current consumption is 350 mA at 5 V DC. Confirm the rack power budget when installing or replacing the module.
Yes. Schneider Electric lists the product as discontinued. Its published service information should be checked for the relevant market and lifecycle status before planning long-term maintenance.
Schneider Electric identifies BMXNOM0200 from the Modicon X80 family as the recommended replacement. Since it belongs to a different PLC platform, system-level compatibility and migration work must be evaluated before substitution.
When purchasing the TSXSCY21601, verify the complete model number and inspect the module’s physical condition. Confirm the connector, PCMCIA slot, housing, and terminal or interface areas are free from damage.
For used or surplus equipment, request clear photographs of the product label and connectors. Where possible, obtain information about the module’s operating condition, test status, and warranty terms.
Because the module is part of a legacy PLC platform, compatibility checks are especially important. Confirm the installed processor, PLC software version, communication protocol, PCMCIA card, and network configuration before ordering a replacement.
During maintenance, inspect the RS-485 wiring, cable shielding, grounding, and network termination. Review diagnostic counters and module status indicators when communication problems occur. Keep a record of device addresses, transmission parameters, and PCMCIA card details.
For modernization projects, evaluate the BMXNOM0200 and the wider Modicon X80 platform as a potential migration path. Consider PLC hardware, rack design, software, field wiring, protocol compatibility, and commissioning requirements as part of the replacement plan.
The Schneider Electric TSXSCY21601 Modicon Premium Communication Module provides multiprotocol serial communication for compatible Premium and Atrium PLC systems. Its isolated RS-485 interface, PCMCIA Type III expansion slot, RTU/ASCII transmission support, and diagnostic functions make it a useful component in established industrial communication networks.
With support for up to 28 devices and a specified Modbus bus length of up to 1,300 meters, the module can serve distributed serial communication applications when correctly configured.
For maintenance and replacement projects, verify the complete model number, PLC compatibility, installed PCMCIA card, and network parameters. Although Schneider Electric recommends BMXNOM0200 as a replacement, migration to the Modicon X80 platform requires a broader compatibility assessment rather than a simple module exchange.