• Schneider VW3M5D1AR50TK 5 Meters Shielded Power Cable
  • Schneider VW3M5D1AR50TK 5 Meters Shielded Power Cable
  • Schneider VW3M5D1AR50TK 5 Meters Shielded Power Cable
  • Schneider VW3M5D1AR50TK 5 Meters Shielded Power Cable
Product Overview The Schneider VW3M5D1AR50TK 5-Meter Shielded Power Cable is an industrial servo motor power connection cable designed for use with Schneider Electric Lexium 28 motion-control systems. I……
Schneider VW3M5D1AR50TK 5 Meters Shielded Power Cable
  • Schneider
  • VW3M5D1AR50TK
  • 5 Meters Shielded Power Cable
  • France
  • 5 meters
  • 0.45 kg
  • Xiamen, China
  • New & In Stock
  • T/T, PayPal, Western Union
  • 1 Year
  • 1-3 Working Days
  • DHL, UPS, TNT, FedEx and EMS.
  • 24-Hour Service
  • COO
  • 7

Our advantage

Schneider VW3M5D1AR50TK 5 Meters Shielded Power Cable

Global Logistics

We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.

Schneider VW3M5D1AR50TK 5 Meters Shielded Power Cable

Brand new and original

Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.

Schneider VW3M5D1AR50TK 5 Meters Shielded Power Cable

24-hour service

We provide 7*24 hours service to our customers. We will be there whenever you need us.

Schneider VW3M5D1AR50TK 5 Meters Shielded Power Cable

Price advantage

All our products are priced very favorably because we have our own warehouse and supply.


Company Information
E-mail [email protected]
Mobile +8615980777398
Whatsapp +8615980777398
WeChat 15980777398

Product Overview

The Schneider VW3M5D1AR50TK 5-Meter Shielded Power Cable is an industrial servo motor power connection cable designed for use with Schneider Electric Lexium 28 motion-control systems. It provides the electrical connection between a compatible BCH2 series servo motor and its servo drive.

In servo applications, the power cable is an important part of the motion-control installation. It carries electrical power from the drive to the motor, allowing the motor to produce the torque and movement required by the machine. Cable selection must account for motor compatibility, conductor size, connector type, cable length, and installation conditions.

The corresponding Schneider Electric reference, VW3M5D1AR50, is a preassembled shielded power cable with four conductors, each measuring 0.82 mm² (AWG 18). It has a 5-meter cable length, a four-pin Molex connector on the servo motor side, and free wire ends on the servo drive side.

The cable is intended for specified BCH2 servo motors without a holding brake. Supported motor configurations include 50 W and 100 W motors with a 40 mm frame, 200 W and 400 W motors with a 60 mm frame, and 400 W and 750 W motors with an 80 mm frame, subject to the manufacturer’s compatibility information.

Shielding helps reduce the effects of electromagnetic interference in industrial environments where servo drives, motors, switching equipment, and power cables operate close together. Proper shield termination and cable routing remain essential for reliable motion-system performance.

This cable is suitable for applications requiring a compatible connection between a Lexium 28 servo drive and a BCH2 servo motor. Before ordering, verify the complete product reference and connector configuration, especially where the listing includes an additional suffix.

Technical Specifications

Parameter Specification
Brand Schneider Electric
Product Reference VW3M5D1AR50
Supplied Listing Model VW3M5D1AR50TK
Product Series Lexium 28
Product Type Shielded Servo Motor Power Cable
Accessory Type Preassembled Power Cordset
Cable Length 5 meters
Cable Construction Shielded
Number of Conductors 4
Conductor Cross-Section 0.82 mm²
Conductor Gauge 4 × AWG 18
Motor-Side Connector Molex 4-pin
Drive-Side Connection Free wire ends
Motor Compatibility Selected BCH2 servo motors without brake
Drive Compatibility Lexium 28
Connection Destination Between servo motor and servo drive
Net Weight 0.45 kg

Note: The verified Schneider Electric reference is VW3M5D1AR50. The additional TK suffix in the supplied listing has not been independently confirmed as a manufacturer-defined variant. Verify the label and connector details before ordering.

Function and Working Principle

The primary function of the VW3M5D1AR50 power cable is to connect a compatible servo motor to its servo drive. It forms part of the electrical power path in a servo motion-control system.

1. Electrical Power Transmission

A servo drive receives commands from a motion controller or automation system and supplies controlled electrical power to the servo motor. The power cable carries the motor-side electrical connection required for operation.

The four-conductor arrangement is designed for the specified BCH2 motor connection. Correct conductor identification and terminal connection are essential during installation.

2. Connection Between Servo Drive and Motor

The cable uses different connection arrangements at its two ends:

  • Motor side: Four-pin Molex connector.
  • Drive side: Free wire ends for connection to the compatible servo drive terminals.

This arrangement provides a preassembled motor-side connection while allowing the drive-side wiring to be completed according to the drive’s terminal layout.

The connector must match the intended motor. A similar-looking connector does not guarantee electrical or mechanical compatibility.

3. Shielding and Electromagnetic Compatibility

Servo drives use switching power electronics to control motor operation. These switching processes can generate electromagnetic interference that may affect nearby control and signal wiring.

The cable’s shielded construction helps limit electromagnetic interference when the shield is correctly connected and the cable is installed according to the manufacturer’s instructions.

Shielding performance depends on proper grounding, termination, cable routing, and the overall installation design. It should not be treated as a substitute for good EMC practices.

4. Stable Motion-System Operation

A correctly selected power cable helps maintain the electrical connection between the servo drive and motor. Loose connections, damaged conductors, incorrect wiring, or unsuitable cable specifications can cause intermittent operation or drive faults.

Using the specified cable reference helps maintenance teams maintain the intended connection arrangement in compatible Lexium 28 and BCH2 installations.

Role in Industrial Motion-Control Systems

The VW3M5D1AR50 is a connection accessory rather than an independent motion controller. Its role is to provide the power connection between two essential components of a servo system.

Servo Drive Connection

The servo drive controls the electrical power supplied to the motor. The cable connects the drive output to the motor-side connector.

The drive-side free ends must be connected to the correct terminals according to the applicable wiring diagram. Incorrect phase or conductor connections can prevent normal operation and may damage equipment.

Servo Motor Connection

The motor-side Molex four-pin connector provides the specified connection to compatible BCH2 servo motors without a holding brake.

The connector should be fully seated and secured according to the manufacturer’s instructions. Damaged pins, contamination, or incomplete insertion may lead to intermittent electrical contact.

Motion Controller Coordination

A motion controller or PLC can coordinate servo operation through the servo drive. It may issue position, speed, or torque commands depending on the system configuration.

The power cable does not carry the controller’s complete motion-command interface. It serves the motor power connection, while command and feedback functions use their designated control and communication connections.

Compatible Servo Motors and Applications

The manufacturer identifies the VW3M5D1AR50 cable for selected BCH2 servo motors without a brake.

BCH2 Motor Configuration Frame Size Compatibility
50 W servo motor 40 mm Listed compatible
100 W servo motor 40 mm Listed compatible
200 W servo motor 60 mm Listed compatible
400 W servo motor 60 mm Listed compatible
400 W servo motor 80 mm Listed compatible
750 W servo motor 80 mm Listed compatible

The motor’s power rating alone is not sufficient to establish cable compatibility. Confirm the exact motor reference, connector arrangement, and whether the motor includes a holding brake.

1. Automated Assembly Machines

Servo motors are widely used in assembly equipment that requires controlled movement of machine components. The power cable provides the connection between the servo drive and motor, supporting the electrical side of the motion system.

2. Packaging Machinery

Packaging machines may use servo motors for feeding, positioning, cutting, and indexing operations. A correctly installed power cable helps maintain the motor connection during repeated production cycles.

3. Material-Handling Equipment

Small servo-driven conveyors, positioning units, and transfer mechanisms require reliable motor connections. The 5-meter cable length can provide installation flexibility where the drive and motor are separated within the machine layout.

4. Labeling and Printing Equipment

Servo systems in labeling and printing machinery may control rollers, feeding mechanisms, and positioning axes. Proper cable selection and EMC installation practices help support stable operation in electrically active machine environments.

5. General Industrial Automation

The cable can be used in compatible Lexium 28 motion-control installations across manufacturing, machine building, and automated production equipment.

Installation and System Integration

Correct installation helps maintain electrical continuity, reduce interference, and prevent unnecessary cable damage.

1. Verify the Complete Product Reference

Before installation, compare the cable label with the required Schneider Electric reference. The verified base reference is VW3M5D1AR50.

If the supplied part is marked VW3M5D1AR50TK, check the connector and cable details against the existing installation rather than relying on the suffix alone.

2. Confirm Motor Compatibility

Check the BCH2 motor model, rated power, frame size, and brake configuration. This cable is specified for selected BCH2 motors without a brake.

Do not assume that it can be used with a BCH2 motor equipped with a holding brake or with another servo motor family.

3. Connect the Motor-Side Connector

Inspect the four-pin Molex connector before installation. Check for bent contacts, contamination, damaged housing parts, or signs of mechanical wear.

Align the connector correctly and secure it according to the motor manufacturer’s instructions. Avoid pulling the cable to remove the connector.

4. Complete the Drive-Side Wiring

The drive-side end uses free wires. Connect the conductors to the designated terminals using the wiring diagram for the specific servo drive.

Confirm conductor identification, terminal assignments, tightening requirements, and protective grounding arrangements before energizing the system.

5. Route the Cable Correctly

Keep the power cable away from sensitive encoder, feedback, and communication wiring where the installation instructions require separation.

Avoid sharp bends, excessive tension, crushing, and contact with hot or moving machine components. If the cable is installed in a cable carrier, verify that its construction and bending radius are suitable for the movement profile.

6. Check Shielding and Grounding

Terminate the shield according to the manufacturer’s EMC recommendations. Poor shield connections may reduce interference protection and contribute to unstable control-system operation.

Use appropriate grounding practices for the drive, motor, cabinet, and cable shield.

7. Perform an Installation Inspection

Before restarting the machine, inspect the full cable route, connector seating, drive-side terminals, and grounding arrangements.

After energizing the system, monitor the servo drive for abnormal alarms and verify motor operation under controlled conditions.

Compatible System Components

The VW3M5D1AR50 is normally used with the following types of equipment in a Lexium 28 servo installation.

Component Function Compatibility Considerations
Schneider Lexium 28 servo drive Controls servo motor operation Confirm the drive model and motor power requirements
Schneider BCH2 servo motor Converts electrical power into mechanical motion Use only the listed compatible motor configurations
Motor-side Molex connector Provides the motor power connection Must match the BCH2 motor connector
Drive-side power terminals Receive the cable’s free-end conductors Follow the exact drive wiring diagram
Motion controller or PLC Coordinates machine movement Uses the appropriate control interface, separate from the motor power connection
Encoder or feedback cable Carries motor feedback signals Use the correct dedicated feedback cable
Control cabinet Houses the drive and related electrical equipment Provide suitable grounding, cable routing, and environmental protection
Cable carrier or protective conduit Supports and protects cable routing Check bending radius and movement suitability

The listed components describe a typical system arrangement. They are not necessarily supplied with the cable.

Alternative Models and Replacement Considerations

When replacing the VW3M5D1AR50, select a cable based on the motor connector, conductor size, length, and motor configuration.

Related Cable Reference General Description Selection Consideration
VW3M5D1AR15 Shielded BCH2 power cable, 1.5 m Shorter cable option for compatible motors
VW3M5D1AR30 Shielded BCH2 power cable, 3 m Alternative length for compatible motor installations
VW3M5D1AR50 Shielded BCH2 power cable, 5 m Base reference corresponding to this listing
VW3M5D2AR30 Shielded BCH2 power cable, 3 m, larger conductor configuration Connector and conductor specifications differ
VW3M5D2AR50 Shielded BCH2 power cable, 5 m, larger conductor configuration Verify the motor-side connector and drive requirements

These are related cable references, not automatically interchangeable replacements.

Before substituting another cable, check:

  • Motor model and frame size.
  • Holding-brake configuration.
  • Motor-side connector type and pin arrangement.
  • Drive-side wiring requirements.
  • Number of conductors.
  • Conductor cross-section and current requirements.
  • Cable length and installation route.
  • Shielding and grounding requirements.
  • Flexibility and suitability for moving applications.

A cable with the same length may still have a different connector or conductor specification. Always compare the complete part number and manufacturer’s wiring information.

Key Advantages

Preassembled Connection

The motor-side Molex connector is factory assembled, helping simplify the connection process when used with a compatible BCH2 motor.

Shielded Cable Construction

The shielded design helps reduce the effects of electromagnetic interference when properly installed and grounded.

5-Meter Cable Length

The 5-meter length provides flexibility for installations where the servo drive and motor are not mounted directly beside each other.

Defined Conductor Configuration

The four-conductor, 0.82 mm² (AWG 18) configuration provides a clearly specified connection arrangement for compatible motor applications.

Lexium 28 System Compatibility

The cable is designed for the Lexium 28 motion-control range and selected BCH2 servo motors, supporting consistent component selection in these installations.

Practical Maintenance Replacement

Using the correct reference helps maintenance teams replace damaged or worn motor power cables without changing the intended connector and wiring arrangement.

Technical FAQs

1. What is the Schneider VW3M5D1AR50TK?

It is listed as a 5-meter shielded servo motor power cable associated with Schneider Electric’s Lexium 28 range. The corresponding verified manufacturer reference is VW3M5D1AR50.

2. What is the cable length?

The cable length is 5 meters.

3. How many conductors does this cable have?

The cable has four conductors, each with a cross-section of 0.82 mm², equivalent to 4 × AWG 18.

4. What connector is used on the motor side?

The motor side uses a four-pin Molex connector.

5. What type of connection is used on the servo drive side?

The servo drive side has free wire ends for connection to the designated drive terminals.

6. Which servo motors are compatible?

The manufacturer lists selected BCH2 motors without a holding brake, including 50 W, 100 W, 200 W, 400 W, and 750 W configurations with specified frame sizes.

7. Can this cable be used with a BCH2 motor that has a holding brake?

The verified compatibility information specifies BCH2 motors without a brake. A motor with a holding brake requires the appropriate cable configuration with the required additional conductors and connector arrangement.

8. What is the weight of the cable?

The manufacturer’s listed net weight is 0.45 kg, matching the supplied product information.

9. Why is shielding important in a servo system?

Servo drives use high-frequency switching to control motor operation. Shielding helps manage electromagnetic interference when correctly terminated and installed. Proper separation of power and signal cables is also important.

10. Is VW3M5D1AR50TK the exact Schneider Electric reference?

The manufacturer documentation identifies VW3M5D1AR50 as the base reference. The additional TK suffix in the supplied listing has not been independently confirmed. Verify the product label before ordering or replacing an existing cable.

Procurement and Maintenance Recommendations

When purchasing the Schneider VW3M5D1AR50TK cable, confirm the complete reference, cable length, motor-side connector, conductor specification, and drive-side termination arrangement.

For replacement projects, compare the existing cable with the new unit before installation. Check whether the motor has a holding brake, as the verified VW3M5D1AR50 configuration is intended for selected BCH2 motors without a brake.

Inspect the cable jacket regularly for cuts, abrasion, crushing, discoloration, and signs of overheating. Check the connector housing and contacts for damage and ensure that the cable is not under excessive mechanical tension.

For installations involving moving machinery, verify that the cable is suitable for the required bending and movement conditions. Do not assume that a standard preassembled power cable is suitable for continuous flexing in every cable-carrier application.

Keep the cable reference and wiring information in the equipment maintenance records. This makes future replacement easier and reduces the risk of installing a cable with an incorrect connector or conductor arrangement.

Conclusion

The Schneider VW3M5D1AR50TK 5-Meter Shielded Power Cable is listed as a Lexium 28 servo motor connection accessory. Its corresponding verified manufacturer reference, VW3M5D1AR50, features four 0.82 mm² conductors, a four-pin Molex connector on the motor side, and free wire ends on the servo drive side.

Designed for selected BCH2 servo motors without a holding brake, the cable provides a defined connection solution for compatible industrial motion-control installations. Confirming the exact reference, motor configuration, connector arrangement, and wiring requirements is essential for reliable replacement and system integration.



Related Products

Get the latest price? We will reply as soon as possible (within 12 hours)

No:77501