Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |

The Schneider Electric VW3M5D1AR30TK Shielded Power Cable is a preassembled motor power connection cable designed for use with Schneider Electric Lexium 28 servo drive systems and compatible BCH2 servo motors. It provides the electrical connection between a servo drive and a servo motor, supporting power transmission in industrial motion-control applications.
Servo systems are widely used in automated machinery that requires controlled movement, repeatable operation, and coordinated motion. A suitable power cable is essential because it connects the drive’s output to the motor while maintaining the electrical and mechanical connection required for reliable operation.
The standard reference VW3M5D1AR30 is specified as a 3-meter shielded power cable with four conductors, each having a cross-sectional area of 0.82 mm². It uses a 4-pin Molex connector on the servo motor side and free wire ends on the servo drive side. This arrangement simplifies connection to compatible BCH2 motors and the corresponding drive terminals.
The cable is intended for BCH2 servo motors without a brake. Published compatibility includes selected 50 W, 100 W, 200 W, 400 W, and 750 W BCH2 motor configurations. Compatibility should always be checked against the exact motor and drive references before installation.
With a cable length of 3 meters and a supplied weight of 0.3 kg, the VW3M5D1AR30TK is suitable for installations where the servo drive and motor are positioned relatively close to one another. Its shielded construction supports electromagnetic compatibility when installed with appropriate grounding and cable-routing practices.
| Parameter | Specification |
|---|---|
| Brand | Schneider Electric |
| Model Provided | VW3M5D1AR30TK |
| Standard Reference Found in Product Documentation | VW3M5D1AR30 |
| Product Series | Lexium 28 |
| Product Type | Shielded Servo Motor Power Cable |
| Accessory Type | Preassembled Power Cordset |
| Cable Length | 3 meters |
| Number of Conductors | 4 |
| Conductor Cross-Section | 0.82 mm² |
| Conductor Gauge | 4 × AWG 18 |
| Motor-Side Connection | 4-pin Molex connector |
| Drive-Side Connection | Free wire ends |
| Compatible Motor Family | Selected BCH2 servo motors |
| Brake Configuration | For motors without brake |
| Connection Destination | Between servo motor and servo drive |
| Weight | 0.3 kg |
| Typical Application | Lexium 28 servo motor power connection |
Note: The technical specifications above correspond to the standard VW3M5D1AR30 reference. Confirm the supplied VW3M5D1AR30TK label and connector configuration before ordering.
The VW3M5D1AR30TK provides the electrical power connection between a compatible servo drive and servo motor. It is a passive connection accessory rather than an electronic control device. Its performance depends on the electrical compatibility of the connected equipment and the quality of the installation.
A servo drive regulates the electrical power supplied to the servo motor. The power cable carries the motor-side electrical output from the drive to the motor.
The cable’s four conductors provide the required power connection for the specified BCH2 motor configuration. Correct conductor identification and terminal connection are essential for proper operation.
Servo drives use switching electronics that can generate electromagnetic interference. Shielding helps reduce unwanted electrical emissions and susceptibility to interference when the cable is installed correctly.
The shield should be terminated according to the manufacturer’s installation instructions. Poor shielding connections, incorrect grounding, or unsuitable cable routing can reduce the effectiveness of the shielding.
The cable uses a 4-pin Molex connector on the servo motor side. This preassembled connector provides a defined connection interface for compatible BCH2 motors.
Before installation, inspect the connector housing, contacts, and locking arrangement. A connector that is damaged, incorrectly aligned, or incompatible with the motor can cause intermittent connections or prevent proper operation.
The opposite end of the cable is supplied with free wire ends for connection to the servo drive. This arrangement allows the installer to connect the conductors to the appropriate drive terminals.
The terminal assignment must be confirmed using the relevant drive and motor documentation. Never assume that wire color alone establishes the correct terminal connection.
The VW3M5D1AR30TK is a connection component within a servo motion-control system. It works alongside the servo drive, motor, controller, and mechanical equipment.
The Lexium 28 servo drive receives commands from the machine controller and regulates motor operation. The power cable connects the drive’s motor output to the compatible BCH2 servo motor.
A correctly installed cable helps maintain the electrical connection required for motor operation.
The BCH2 servo motor converts electrical energy into mechanical movement. The motor’s performance depends on the drive configuration, mechanical load, feedback arrangement, and electrical connection.
The cable must match the motor’s connector and electrical requirements.
A PLC or motion controller can coordinate servo operation with sensors, actuators, and other machine components. The cable itself does not transmit PLC commands or feedback signals; its primary purpose is motor power transmission.
Control and feedback connections should be handled using the appropriate cables and interfaces specified for the system.
The VW3M5D1AR30TK can be used in automation equipment built around compatible Lexium 28 drives and BCH2 servo motors.
Packaging machines use servo motors for feeding, indexing, positioning, and other controlled movements. A suitable motor power cable supports the connection between the drive and motor in these systems.
Automated assembly equipment often requires compact servo systems for repeatable mechanical movement. The 3-meter cable length can be useful when the motor and drive are installed within a relatively short distance of one another.
Small material-handling machines may use servo motors for controlled feeding, transfer, or positioning. The cable provides the power connection required for compatible servo motor operation.
Servo motors are commonly used in labeling and printing machines to coordinate rollers, feeding mechanisms, and positioning assemblies. Correct cable selection helps maintain the electrical connection between the drive and motor.
The cable may also be used in compact machinery, automated production stations, and other equipment that uses compatible BCH2 motors without brakes.
Application suitability depends on the exact motor reference, drive terminals, cable routing, and environmental conditions.
Proper installation is important for maintaining electrical reliability and reducing interference in servo systems.
Before installation, confirm that the cable is intended for the exact BCH2 motor and Lexium 28 drive configuration.
The standard VW3M5D1AR30 reference is specified for selected BCH2 motors without brakes. It should not automatically be substituted for a cable intended for a motor with a brake.
The cable length is 3 meters. Confirm that this is sufficient for the actual installation route.
Avoid unnecessary tension, sharp bends, and excessive cable movement. The cable should be routed so that it does not interfere with moving machine components.
Check the 4-pin Molex connector for damaged contacts, contamination, or mechanical deformation. Ensure that the connector is correctly aligned and fully secured when connected to the motor.
Do not force the connector into position.
The drive-side end has free wire ends. Identify each conductor using the manufacturer’s wiring diagram and connect it to the correct drive terminals.
Incorrect wiring may damage the motor or drive. Installation should be performed by qualified personnel with the equipment isolated from the power supply.
Follow the manufacturer’s recommendations for shield termination and grounding. Keep the cable away from sensitive signal wiring where practical, and avoid routing it unnecessarily close to sources of electrical interference.
Correct shielding and grounding practices are particularly important in systems containing servo drives, switching power supplies, and other electronic equipment.
After installation, inspect the cable route and connector engagement. Verify the drive and motor configuration before energizing the system.
Test motor operation at a suitable commissioning speed and check for alarms, abnormal noise, intermittent connections, or unexpected movement.
The VW3M5D1AR30TK is designed to operate as part of a compatible Lexium servo installation.
| Component | Function | Compatibility Considerations |
|---|---|---|
| Schneider Electric Lexium 28 Servo Drive | Controls servo motor operation | Confirm the drive supports the selected BCH2 motor |
| Schneider Electric BCH2 Servo Motor | Converts electrical energy into mechanical motion | Standard VW3M5D1AR30 is specified for selected motors without brakes |
| VW3M5D1AR30 Power Cable | Transfers power between drive and motor | 3 m, four conductors, 0.82 mm² |
| PLC or Motion Controller | Provides machine and motion commands | Uses the appropriate drive control interface |
| Motor Feedback Cable | Carries feedback signals where required | Must be selected separately according to motor and drive |
| Control Cabinet | Houses the servo drive and related equipment | Provide suitable ventilation and cable management |
| Grounding Accessories | Support electrical safety and EMC performance | Follow the installation instructions |
The power cable does not replace the motor feedback cable or other control connections. Confirm the complete system wiring requirements before commissioning.
When replacing a servo power cable, matching the connector and conductor configuration is more important than selecting a cable based only on length.
| Related Model | Description | Main Difference |
|---|---|---|
| VW3M5D1AR15 | 1.5 m shielded power cable | Shorter cable length |
| VW3M5D1AR30 | 3 m shielded power cable | Standard reference corresponding to the supplied specification |
| VW3M5D1AR50 | 5 m shielded power cable | Longer cable length |
| VW3M5D1FR30 | 3 m shielded power cable for motors with brake | Different conductor arrangement for brake-equipped motors |
| VW3M5D2AR30 | 3 m shielded power cable with larger conductors | Different conductor cross-section and connector configuration |
These are related cable references, not automatic substitutes. Before selecting an alternative, verify the motor-side connector, drive-side termination, conductor size, brake configuration, and permitted cable length.
The cable is supplied with a motor-side connector and free wire ends for the drive side, reducing the need to assemble the motor connector separately.
The shielded design supports electromagnetic compatibility in servo installations when correctly grounded and routed.
The 3-meter cable is suitable for installations where the servo drive and motor are located relatively close together.
The standard reference is specified for selected BCH2 motors without brakes, helping users identify the intended application.
With a supplied weight of 0.3 kg, the cable is convenient to handle and install in compact automation equipment.
The cable is designed for use within the Lexium 28 servo ecosystem, supporting connections between compatible drives and BCH2 motors.
It is listed as a 3-meter shielded power cable for servo motor applications. The standard reference found in Schneider-related documentation is VW3M5D1AR30, which is designed for compatible BCH2 motors and Lexium 28 drives.
The specified cable length is 3 meters.
The standard VW3M5D1AR30 is specified for selected BCH2 motors rated at 50 W, 100 W, 200 W, 400 W, and 750 W, depending on motor frame and configuration. Check the exact motor reference before ordering.
The standard VW3M5D1AR30 is intended for BCH2 motors without brakes. Brake-equipped motors require the appropriate cable configuration, such as a compatible reference from the VW3M5D1FR series.
The standard cable uses a 4-pin Molex connector on the servo motor side.
The drive side is supplied with free wire ends for connection to the appropriate servo drive terminals.
The cable has four conductors, each with a cross-sectional area of 0.82 mm², corresponding to approximately AWG 18.
Servo drives use switching electronics that can produce electromagnetic interference. Proper cable shielding, grounding, and routing help manage this interference and support stable system operation.
Not necessarily. Connector type, conductor size, motor brake configuration, and drive-side wiring must all match. Cable length alone is not enough to establish compatibility.
Confirm the complete part number, motor compatibility, brake configuration, connector type, conductor specification, cable length, and physical condition. Because the supplied number includes the suffix TK, verify that suffix against the product label and supplier documentation.
When purchasing the Schneider Electric VW3M5D1AR30TK, verify the full part number and compare it with the standard VW3M5D1AR30 product reference. Confirm that the cable is intended for the installed BCH2 motor and Lexium 28 drive.
For replacement projects, inspect the original cable’s connector, conductor count, length, and brake configuration. A cable that looks similar may have a different electrical arrangement and should not be installed without confirmation.
During maintenance, inspect the cable jacket for cuts, abrasion, crushing, or excessive bending. Check the motor-side connector for loose contacts and mechanical damage. Verify that the cable shield and grounding arrangement remain intact.
Keep the cable away from sharp edges, excessive heat, oil contamination, and moving machine parts. Replace damaged cables rather than relying on temporary repairs that may compromise electrical safety or EMC performance.
The Schneider Electric VW3M5D1AR30TK Shielded Power Cable is listed as a 3-meter connection cable for compatible BCH2 servo motors and Lexium 28 servo drives. Its standard documented reference, VW3M5D1AR30, uses four 0.82 mm² conductors, a 4-pin Molex motor-side connector, and free wire ends on the drive side.
With a supplied weight of 0.3 kg, it is a compact connection accessory for industrial motion-control installations. Correct model identification, motor compatibility, shielding, and wiring are essential when selecting or replacing this cable.