Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |

The Schneider Electric VIA0701D02F0000 Servo Motor is an integrated servo motor from the ELAU PacDrive iSH070 series. It is designed for precision motion control in automated machinery and industrial production systems. The motor combines a servo motor assembly with feedback and braking features, making it suitable for applications that require controlled acceleration, repeatable positioning, and coordinated machine movement.
This model corresponds to the iSH070/60011/0/0/00/0/00/11/00 configuration. Its documented characteristics include a 70 mm flange size, approximately 1.1 Nm standstill torque, a rated speed of 6000 rpm, a 680 V DC motor supply specification, and a SinCos SKM 36 encoder. The configuration also includes a holding brake and a smooth shaft end.
As part of the PacDrive motion-control product family, the VIA0701D02F0000 is intended for integration with a compatible servo drive and motion controller. The feedback device provides information about motor position and movement, while the holding brake supports mechanical holding when the motor is stationary and the brake is correctly controlled.
The motor is particularly relevant to machinery where coordinated motion is important. Typical application areas include packaging equipment, handling systems, automated production machinery, and other applications that require controlled rotary motion.
When selecting this motor as a replacement, the complete catalog number should be checked carefully. Variants within the iSH070 family can differ in brake configuration, encoder type, shaft design, and other electrical or mechanical characteristics. A motor with the same flange size or nominal torque is not necessarily a direct replacement.
| Parameter | Specification |
|---|---|
| Brand | Schneider Electric |
| Product Family | ELAU PacDrive |
| Motor Series | iSH070 |
| Model | VIA0701D02F0000 |
| Product Type | Integrated Servo Motor |
| Corresponding Motor Designation | iSH070/60011/0/0/00/0/00/11/00 |
| Flange Size | 70 mm |
| Standstill Torque | 1.1 Nm |
| Rated Speed | 6000 rpm |
| Motor Supply Specification | 680 V DC |
| Encoder | SinCos SKM 36 |
| Holding Brake | Included |
| Shaft Design | Smooth shaft end |
| Cooling | Self-cooling |
| Protection Rating | IP50 |
| Length Provided | 252 mm |
| Weight Provided | 2.95 kg |
| Typical Application | Precision motion control in automated machinery |
Note: The length and weight shown above are the supplied listing values. Confirm the exact mechanical drawing, connector orientation, mounting arrangement, and nameplate data before installation.
The VIA0701D02F0000 operates as part of a servo motion-control system. Its function is to convert electrical energy into controlled mechanical rotation while providing feedback that allows the servo controller to regulate motor movement.
Unlike a conventional fixed-speed motor, a servo motor is used in a system where movement is actively controlled. The controller compares the requested motion with feedback from the motor and adjusts the drive output to achieve the required response.
The motor receives electrical power from a compatible servo drive. The drive generates controlled electrical output for the motor according to the motion command.
The motor converts this electrical input into rotational movement. By controlling the electrical output, the servo system can regulate speed, acceleration, torque, and position according to the machine’s operating requirements.
The 680 V DC figure is a documented motor supply specification for this configuration. It should not be interpreted as permission to connect the motor directly to an uncontrolled DC supply. The correct compatible servo drive and connection arrangement must be used.
The VIA0701D02F0000 uses a SinCos SKM 36 encoder configuration. Encoder feedback provides information about motor movement and position to the compatible control system.
The servo drive uses feedback signals to compare actual motor behavior with the commanded motion. It can then adjust the motor output to reduce the difference between the requested and measured movement.
This closed-loop approach supports controlled motion and repeatability in applications such as packaging, handling, and automated machine operation.
The exact feedback interface, signal processing, and supported operating modes depend on the compatible PacDrive drive and controller configuration.
The motor has a documented standstill torque of approximately 1.1 Nm. Standstill torque is an important parameter when evaluating the motor’s ability to produce torque at zero or very low speed under specified conditions.
The required torque during operation depends on the machine’s load, acceleration profile, friction, inertia, and mechanical transmission.
For this reason, motor selection should not be based on standstill torque alone. Engineers should also evaluate the load’s dynamic torque demand, peak requirements, duty cycle, and thermal conditions.
The specified motor configuration includes a holding brake. A holding brake is used to help keep the motor shaft stationary when the motor is not actively producing motion.
It is particularly useful in machinery where an axis must remain in position during a stop or when the drive is disabled. The brake must be controlled according to the manufacturer’s instructions and the machine’s safety design.
A holding brake should not automatically be treated as a dynamic stopping brake. The machine’s normal deceleration should be handled by the servo system unless the manufacturer’s specifications explicitly permit another arrangement.
The documented rated speed is 6000 rpm. The servo controller manages motor speed according to the commanded operating profile and feedback signals.
Actual permissible speed depends on load, operating conditions, drive compatibility, mechanical limits, and the manufacturer’s specifications. The rated speed should not be interpreted as a guaranteed operating speed under every load condition.
The VIA0701D02F0000 is normally used as part of a coordinated motion-control architecture. It works with a compatible servo drive, motion controller, feedback interface, and mechanical transmission.
The servo drive supplies controlled electrical power to the motor and processes its feedback signals. It regulates motor current and movement according to the command received from the motion controller.
The drive must support the motor’s electrical and feedback configuration. The motor’s encoder type, brake connection, supply requirements, and supported parameters should be checked before selecting a replacement drive.
A motion controller coordinates the movement of one or more servo axes. It can generate motion profiles, manage acceleration and deceleration, and synchronize motor movement with machine operations.
In packaging machinery, for example, a controller may coordinate feeding, cutting, sealing, and product transfer. The servo motor executes the commanded rotary movement while feedback supports motion regulation.
A PLC can manage the overall machine sequence and exchange operating information with the motion-control system. It may coordinate production states, safety interlocks, sensor inputs, and machine-level commands.
The motion controller and servo drive handle the detailed motor-control functions, while the PLC coordinates the wider automation process.
The SinCos feedback device supplies motor movement information to the compatible servo system. This information helps the controller regulate movement and identify certain abnormal operating conditions.
Correct encoder wiring, connector compatibility, and parameter configuration are essential. An incorrect feedback connection can prevent proper motor operation or produce position-related faults.
The PacDrive iSH070 servo motor family is intended for motion-control applications where controlled movement and feedback are required. The suitability of the VIA0701D02F0000 depends on the motor’s torque, speed, electrical characteristics, and mechanical interface.
Packaging equipment often requires coordinated motion for product feeding, film handling, cutting, sealing, and transfer.
A servo motor can execute controlled rotary movement according to the machine’s motion profile. Encoder feedback helps the motion controller regulate the movement and maintain repeatable operation.
The holding brake may also be useful in machine configurations where a stationary axis must remain mechanically held during a stop.
Automated handling systems use servo motors to control the movement of mechanical axes, rotary mechanisms, and transfer assemblies.
The motor can be integrated with a compatible drive and controller to support repeatable movement between defined machine positions.
Mechanical load, acceleration requirements, and braking behavior should be evaluated before selecting the motor.
Assembly equipment may require controlled rotation for indexing, positioning, feeding, and other repetitive operations.
The servo motor’s feedback capability allows the motion system to regulate movement according to the programmed sequence. This can support consistent machine operation when the motor is correctly sized and commissioned.
Printing and labeling systems may require coordinated movement between rollers, feeders, and product-handling mechanisms.
Servo control can help synchronize the movement of different machine axes. The encoder feedback supports the control system in monitoring motor movement during production.
The suitability of this model depends on the required speed profile, torque, mechanical transmission, and controller compatibility.
The motor may also be used in other automated machines requiring controlled rotary movement. Examples include compact processing equipment, machine modules, and specialized production systems.
The final application must be evaluated against the documented motor ratings and the capabilities of the complete servo-control system.
Correct installation is essential for achieving reliable servo operation. The motor must be mechanically mounted, electrically connected, and configured for the compatible PacDrive control system.
Before installation, confirm the complete model number VIA0701D02F0000 and the corresponding iSH070 motor designation.
Check the motor nameplate, encoder type, brake configuration, shaft design, and connector arrangement. Do not assume that another iSH070 motor with a similar appearance has identical electrical and mechanical characteristics.
The supplied motor length is 252 mm. Verify this measurement against the exact mechanical drawing before designing or modifying the machine structure.
Check the 70 mm flange interface, mounting-hole arrangement, shaft dimensions, coupling design, and available installation clearance.
The motor should be mounted securely and aligned with the driven equipment. Incorrect alignment can increase bearing loads, vibration, and mechanical wear.
The servo drive must support the motor’s electrical and feedback configuration. Verify the required DC bus arrangement, motor current requirements, encoder interface, brake control, and parameter set.
Do not connect the motor to a drive based only on voltage or physical connector similarity. The complete motor and drive combination must be supported by the manufacturer’s documentation.
Use the appropriate motor and feedback cables for the exact connector configuration. Follow the manufacturer’s wiring instructions for signal assignment, shielding, grounding, and cable routing.
Keep encoder cables separated from high-power conductors where required to reduce electromagnetic interference.
Inspect connectors for bent contacts, contamination, damaged insulation, and loose locking mechanisms before commissioning.
The holding brake must be connected and controlled according to the motor and drive documentation.
Verify the brake supply, release sequence, and control logic. The brake should release before the motor is commanded to move and engage under the appropriate stopped condition.
The brake’s mechanical holding capacity must be checked against the actual load. It should not be used for repeated dynamic stopping unless explicitly rated for that purpose.
The compatible servo system must be configured with the correct motor data and feedback settings. Relevant parameters may include motor identification, encoder configuration, current limits, speed limits, acceleration, deceleration, and brake behavior.
Use the correct motor-specific configuration rather than transferring parameters from another iSH070 variant.
Before returning the machine to production, verify the mechanical installation, electrical connections, encoder feedback, and brake operation.
Perform controlled low-speed tests where permitted by the commissioning procedure. Check rotation direction, feedback response, movement accuracy, acceleration, deceleration, and abnormal vibration or noise.
Record the final configuration and commissioning results for future maintenance.
The VIA0701D02F0000 is intended to operate as part of a compatible servo-control system. The following components describe typical system roles; they are not a declaration that every listed component is directly compatible with this motor.
| Component | System Function | Compatibility Considerations |
|---|---|---|
| PacDrive servo drive | Supplies controlled power to the motor | Must support the motor’s electrical and encoder configuration |
| PacDrive motion controller | Coordinates axis movement | Confirm controller and drive platform compatibility |
| SinCos encoder interface | Processes motor feedback | Must support the SKM 36 feedback configuration |
| Motor power cable | Connects the servo drive to the motor | Verify connector type, pin assignment, and current rating |
| Feedback cable | Transfers encoder signals | Confirm shielding, wiring, and connector compatibility |
| Brake control circuit | Controls the holding brake | Follow the specified brake voltage and switching requirements |
| Mechanical coupling | Transfers motor torque to the machine | Match shaft geometry and allowable mechanical loads |
| Gearbox or transmission | Adapts speed and torque where required | Check ratio, inertia, backlash, and mounting interface |
| Machine PLC | Coordinates machine sequences | Confirm the communication and control architecture |
| Machine safety system | Manages safety-related machine functions | Design according to the applicable machinery safety requirements |
The exact part numbers for drives, cables, and accessories should be selected from the motor’s technical documentation and the installed PacDrive system configuration.
The VIA0701D02F0000 belongs to a specific iSH070 configuration. Replacement selection requires more than matching the flange size or nominal torque.
| Alternative or Related Option | Consideration |
|---|---|
| Another VIA0701D02F0000 unit | The preferred like-for-like option when the complete configuration matches |
| Other VIA0701 iSH070 variants | May differ in brake, encoder, shaft, or connection configuration |
| Other iSH070 motors | Require comparison of torque, speed, feedback, mounting, and electrical specifications |
| Schneider Electric Lexium integrated servo motors | May be considered for a broader modernization project, but are not automatically direct replacements |
| Other PacDrive-compatible servo motors | Require confirmation of drive, controller, feedback, and mechanical compatibility |
Before selecting a replacement, compare:
A replacement motor may require changes to cables, drive parameters, mechanical mounting, or motion-control configuration. For critical production machinery, verify the complete motor-drive combination before removing the original unit.
The iSH070 configuration is designed for use in a coordinated servo motion-control system, supporting controlled movement in automated machinery.
The SinCos SKM 36 encoder provides feedback information to the compatible servo system, supporting closed-loop motor regulation.
The included holding brake can help maintain the motor shaft in a stationary condition when correctly controlled and applied within its rated limits.
The documented rated speed supports applications requiring relatively fast rotary motion, subject to the motor’s load and operating limits.
The 70 mm flange size provides a defined mechanical mounting interface for machinery designed around this motor format.
The smooth shaft end can be integrated with an appropriate coupling or transmission designed for the motor’s shaft geometry.
The motor belongs to the ELAU PacDrive family and can be used in a compatible motion-control architecture where its electrical, feedback, and mechanical requirements are met.
It is an ELAU PacDrive iSH070 integrated servo motor designed for controlled rotary motion in industrial automation equipment.
The model corresponds to iSH070/60011/0/0/00/0/00/11/00. This designation helps identify the specific motor configuration when checking replacement compatibility.
The documented standstill torque is approximately 1.1 Nm. Actual operating torque depends on the motor’s operating conditions and the compatible drive configuration.
The documented rated speed is 6000 rpm. The permissible operating speed under a particular load should be checked against the manufacturer’s specifications.
Yes. The specified VIA0701D02F0000 configuration includes a holding brake. The brake must be controlled according to the manufacturer’s wiring and operating instructions.
This configuration is identified with a SinCos SKM 36 encoder. The compatible drive and feedback interface must support this encoder type.
The documented flange size is 70 mm. The mounting-hole arrangement and mechanical dimensions should be checked before installation.
No. It requires a compatible servo drive that supports its electrical characteristics, encoder feedback, and brake arrangement. Physical connector similarity is not sufficient to establish compatibility.
Verify the complete catalog number, corresponding iSH070 designation, torque, speed, flange, shaft, encoder, brake, cable connections, and compatible drive. These details help prevent incorrect substitutions.
It can be considered for packaging and other automated machinery when the motor’s torque, speed, feedback, and mechanical configuration match the machine’s motion requirements. Final suitability depends on the complete servo system design.
When purchasing the Schneider Electric VIA0701D02F0000, begin by confirming the complete catalog number and its corresponding iSH070 designation. This is especially important for legacy PacDrive equipment, where similar-looking motor variants may have different encoder or brake configurations.
For used, refurbished, or surplus units, request clear photographs of the nameplate, shaft, mounting flange, connectors, and brake connections. Ask for available test information covering encoder feedback, motor operation, and holding-brake function.
Check whether the motor is supplied with cables or accessories. Do not assume that power cables, feedback cables, mounting hardware, or a compatible servo drive are included unless the supplier explicitly confirms them.
For maintenance, inspect the motor mounting, shaft coupling, cable connectors, and surrounding mechanical assembly. Monitor abnormal noise, vibration, temperature, and changes in motion performance. Keep connectors clean and protect the motor from environmental conditions beyond its specified protection rating.
When replacing a motor, verify the complete motor-drive combination and preserve the original machine parameters where appropriate. Any changes to encoder configuration, brake control, or motion settings should be reviewed and commissioned by qualified personnel.
The Schneider Electric VIA0701D02F0000 is an ELAU PacDrive iSH070 integrated servo motor designed for precision motion-control applications. Its documented configuration includes a 70 mm flange, approximately 1.1 Nm standstill torque, 6000 rpm rated speed, SinCos SKM 36 encoder, and holding brake.
The motor is suitable for consideration in automated machinery where controlled rotary movement and feedback are required. Accurate catalog identification and compatibility checks are essential when sourcing or replacing this component, particularly in existing PacDrive installations.