Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |

The Schneider NW25HA MasterPact 2500A is a large-frame low-voltage power distribution switching device designed for demanding industrial and commercial electrical installations. It belongs to Schneider Electric’s MasterPact NW family and is intended for use in main distribution systems, switchboards, and other installations where high-current switching and electrical isolation are required.
The NW25HA designation identifies a 2500 A MasterPact NW device with HA performance characteristics. Schneider documentation identifies the NW25HA switch-disconnector configuration as a device for switching and isolation. It is important to distinguish this function from the overcurrent protection provided by a circuit breaker equipped with an appropriate trip unit. The exact product configuration must therefore be checked before specifying it as a protective circuit breaker.
The version matching the supplied dimensions and weight is a three-pole, drawout-style NW25HA device. Its 2500 A current rating and 690 V AC operational-voltage rating make it suitable for appropriately engineered low-voltage power distribution systems. The drawout arrangement allows the device to be withdrawn from its chassis for inspection or maintenance, subject to the required electrical isolation and safety procedures.
MasterPact equipment is commonly used in installations where electrical continuity, safe isolation, and organized maintenance procedures are important. Its application may include main switchboards, industrial distribution panels, power centers, and large facility electrical systems.
Before ordering, users should verify the complete Schneider Electric reference, pole configuration, chassis arrangement, and whether the required product is a switch-disconnector or a circuit breaker with an overcurrent trip unit.
| Parameter | Specification |
|---|---|
| Brand | Schneider Electric |
| Product Series | MasterPact NW |
| Model | NW25HA |
| Product Type | MasterPact NW Switch-Disconnector |
| Common Listing Description | Circuit Breaker |
| Rated Current | 2500 A |
| Rated Operational Voltage | Up to 690 V AC |
| Network Type | AC |
| Rated Frequency | 50/60 Hz |
| Pole Configuration | 3-pole version matching supplied dimensions |
| Mounting Type | Drawout |
| Performance Code | HA |
| Rated Insulation Voltage | 1000 V AC |
| Rated Impulse Withstand Voltage | 12 kV |
| Rated Short-Circuit Making Capacity | Depends on the exact product reference and applicable rating conditions |
| Isolation Suitability | Yes, according to the relevant switch-disconnector specification |
| Operating Control | Push-button |
| Mounting Support | Chassis |
| Dimensions Provided | 442 × 352 × 297 mm |
| Weight Provided | 60 kg |
| Typical Application | Industrial low-voltage power distribution |
Important: The NW25HA designation is used in Schneider’s MasterPact documentation for switch-disconnector configurations. Do not assume that every NW25HA device includes an overcurrent trip unit. Confirm the complete catalog number and nameplate before specifying protection functions.
The Schneider MasterPact NW25HA is designed for high-current switching and isolation in low-voltage AC distribution systems. Its operating mechanism allows the electrical circuit to be connected or disconnected through a controlled switching operation.
The device is designed for a rated operational current of 2500 A. Its contact system provides a controlled path for current under the operating conditions specified by the manufacturer.
In an industrial distribution system, a main switching device may be used to connect or disconnect a large electrical load or distribution section. The correct selection depends on the system voltage, continuous current, short-circuit conditions, and the installation’s protection architecture.
Isolation is an important function during electrical maintenance. A suitable switch-disconnector can provide an isolation point between an electrical supply and downstream equipment.
The MasterPact NW25HA documentation identifies suitability for isolation. However, isolation must be performed using the correct operating procedure and verified according to applicable electrical safety requirements. The device’s position indicator and mechanical arrangement should be checked as part of the site’s isolation procedure.
The drawout design allows the device to be installed in a compatible chassis. Depending on the chassis and operating arrangement, it can be moved between operating, test, and disconnected positions.
This arrangement supports maintenance access and can reduce the need to dismantle the complete switchboard when the device requires inspection or replacement.
The chassis, mechanical interlocks, and connection arrangement must be compatible with the exact MasterPact model.
The HA performance designation identifies a particular performance category within the MasterPact range. Short-circuit making and withstand characteristics must be evaluated using the exact manufacturer’s ratings and the installation’s electrical conditions.
A switch-disconnector should not be treated as a substitute for a circuit breaker with an appropriately rated protective trip unit. Where overcurrent protection is required, the system must include a correctly selected protective device coordinated with the switch-disconnector.
Position indication helps operators and maintenance personnel identify the switching device’s operating state. This information is important when coordinating maintenance activities and confirming the equipment’s status.
Position indication should be used together with the site’s electrical isolation and verification procedures rather than as the sole proof that a circuit is safe.
The NW25HA can form part of a high-current distribution arrangement in an industrial facility. Its role depends on whether it is installed as a main switching device, an isolation device, or as part of a larger protective distribution assembly.
Large industrial facilities often use main distribution switchboards to receive electrical power and distribute it to downstream feeders. A 2500 A MasterPact device may be incorporated into an appropriately designed switchboard to provide a controlled switching or isolation point.
The complete system must be engineered for the expected load current, voltage, fault level, and operating conditions.
Power distribution centers supply electrical power to multiple production areas, motor control centers, and auxiliary systems. High-current switching devices can help organize the distribution architecture and provide defined isolation points for maintenance.
The selection of upstream and downstream protective devices is essential to ensure that faults are cleared safely and selectively.
The device may be installed in electrical rooms serving manufacturing plants, processing facilities, and large commercial buildings. The drawout arrangement can support maintenance planning when the chassis and switchboard have been designed for the relevant device.
In some installations, MasterPact devices are used in distribution assemblies connected to transformers or generator systems. Their suitability depends on the system’s voltage, current, fault level, switching duty, and protection coordination.
The NW25HA should only be applied where the manufacturer’s ratings and the complete electrical design support the intended function.
Manufacturing facilities require reliable distribution of electrical power to production lines, motors, control cabinets, and auxiliary equipment. A 2500 A switching device can be incorporated into a main distribution board serving large production loads.
Its switching and isolation functions can support planned maintenance and electrical system organization.
Data centers use structured low-voltage distribution systems to supply servers, cooling equipment, UPS systems, and auxiliary loads.
A MasterPact device may be used in a suitable distribution assembly where its current and voltage ratings meet the system requirements. Redundancy, selectivity, fault-clearing coordination, and maintenance procedures must be evaluated as part of the overall electrical design.
Industrial power distribution facilities use high-current switching equipment to manage electrical supply between incoming sources, busbars, and outgoing feeders.
The NW25HA can serve as a switching or isolation component in an appropriately rated assembly. Separate protective devices may be necessary depending on the system architecture.
Large water treatment facilities use pumps, blowers, filtration equipment, and other electrical loads. Main distribution equipment must support the facility’s power requirements and maintenance strategy.
A high-current MasterPact device may be used within a distribution system supplying these loads, provided the equipment ratings and environmental conditions are suitable.
Large commercial buildings, transport facilities, and infrastructure installations may require high-capacity electrical distribution equipment.
MasterPact devices can be incorporated into main switchboards where controlled switching, isolation, and organized maintenance are required.
Correct installation is essential for the safe operation and long-term reliability of high-current distribution equipment.
Before installation, check the complete Schneider Electric catalog number and nameplate. Confirm that the device is the intended NW25HA configuration and that its pole count, voltage rating, current rating, and mounting arrangement match the switchboard.
Do not rely only on the abbreviated NW25HA model designation.
Verify the system’s rated voltage, frequency, continuous current, and prospective short-circuit current. Confirm that the device’s applicable switching and withstand ratings are suitable for the installation.
If the system requires automatic overcurrent protection, verify that a properly rated circuit breaker and trip unit are provided in the overall assembly.
The drawout device must be installed in a compatible MasterPact chassis. Check the mechanical dimensions, guide rails, primary connections, secondary connections, and interlocking arrangement.
Never force the device into a chassis that does not match the manufacturer’s compatibility requirements.
High-current connections require suitable busbar sizing, correct contact alignment, and properly tightened electrical joints.
Follow the manufacturer’s installation instructions for contact inspection, connection preparation, tightening procedures, and clearances. Poor electrical connections can result in overheating, excessive contact resistance, and equipment damage.
The complete switchboard must have a suitable protective grounding arrangement. Verify that the enclosure, chassis, and associated electrical components are bonded according to the applicable standards.
Maintain appropriate clearances and ensure that the switchboard is designed for the installation’s voltage and fault conditions.
Before energizing the system, inspect the device, chassis, mechanical interlocks, connection points, and position indicators.
Carry out the required mechanical and electrical checks in accordance with the manufacturer’s instructions and the facility’s commissioning procedures. Where the device is part of a protective assembly, verify the associated circuit-breaker and protection-system settings separately.
High-current switchgear should only be installed, tested, and maintained by qualified electrical personnel.
The NW25HA is normally used as part of a larger low-voltage distribution assembly. The following components may form part of the overall system, depending on the application.
| Component | Function | Integration Considerations |
|---|---|---|
| MasterPact NW chassis | Supports the drawout device | Must match the exact frame, pole configuration, and product reference |
| Main busbar system | Distributes high-current electrical power | Verify current rating, temperature rise, clearances, and connection design |
| Upstream circuit breaker | Provides coordinated upstream protection where required | Confirm fault ratings and protection coordination |
| Downstream protective devices | Protect individual feeders and loads | Select according to load and fault-current requirements |
| Auxiliary contacts | Provide device status signals | Confirm contact arrangement and accessory compatibility |
| Voltage release accessories | Support remote operating or release functions where applicable | Verify exact accessory references and control voltage |
| Motor operating mechanism | Enables electrical operation where configured | Confirm compatibility with the installed device |
| Switchboard enclosure | Provides mechanical and environmental protection | Must accommodate device dimensions, heat dissipation, and access requirements |
| Monitoring and control system | Monitors electrical distribution status | Verify the available auxiliary signals and communication accessories |
The listed components are examples of equipment that may be used in the wider distribution system. They are not necessarily included with the NW25HA device.
When replacing a MasterPact NW25HA, engineers should compare the complete technical configuration rather than selecting another device solely because it has a 2500 A rating.
| Alternative or Related Model | Replacement Considerations |
|---|---|
| MasterPact NW25HA 3-pole version | Relevant when matching the supplied three-pole drawout configuration |
| MasterPact NW25HA 4-pole version | Has a different pole arrangement and must not be treated as mechanically or electrically identical |
| MasterPact NW25H1 | A related MasterPact NW25 performance variant; verify protection and breaking characteristics |
| MasterPact NW25H2 | A different performance configuration requiring detailed rating comparison |
| MasterPact NW25H3 | A related variant that must be checked against the original application |
| Newer MasterPact range | May be considered for modernization, but chassis, dimensions, accessories, and protection coordination may differ |
Before approving a replacement, compare:
A 2500 A rating alone does not establish interchangeability. Replacement work should be reviewed by a qualified switchgear engineer.
The 2500 A rating makes the NW25HA suitable for appropriately designed high-current distribution applications.
The device belongs to Schneider Electric’s MasterPact NW family, which is used in industrial and commercial low-voltage distribution systems.
The drawout arrangement supports equipment withdrawal and maintenance access when used with the correct chassis.
The documented switch-disconnector configuration is suitable for isolation under the relevant manufacturer specifications and operating procedures.
The device can be integrated into main switchboards and power distribution assemblies where high-current switching is required.
The chassis-mounted design provides a structured installation arrangement for compatible switchboards and distribution panels.
The NW25HA is a MasterPact NW high-current device rated at 2500 A. Schneider documentation identifies relevant NW25HA configurations as switch-disconnectors designed for switching and isolation in low-voltage AC distribution systems.
The rated operational current is 2500 A under the specified operating conditions.
The documented NW25HA switch-disconnector configuration has a rated operational voltage of up to 690 V AC at 50/60 Hz.
Schneider’s product documentation identifies the NW25HA switch-disconnector configuration as a switch-disconnector. A switch-disconnector should not automatically be assumed to include an overcurrent trip unit. Confirm the exact product reference and protection arrangement before purchasing.
Yes. The relevant MasterPact NW25HA configurations include drawout versions. The device must be installed in the correct compatible chassis.
HA identifies a performance category within the MasterPact NW family. The applicable short-circuit and switching characteristics should be checked in the technical documentation for the exact catalog reference.
The supplied dimensions are 442 × 352 × 297 mm. These match the published dimensions for the relevant three-pole drawout NW25HA configuration.
The supplied weight is 60 kg, consistent with the product information for the matching three-pole drawout version.
Not automatically. Different NW25 variants may have different performance levels, pole arrangements, mounting configurations, and protection functions. Check the full catalog number and chassis compatibility before replacement.
Confirm the complete product reference, pole count, drawout or fixed mounting arrangement, rated current, voltage, product function, mechanical condition, and included accessories. If the application requires overcurrent protection, verify the presence and compatibility of the required protective device and trip unit.
When purchasing the Schneider NW25HA, begin by identifying the exact product reference and the function required by the electrical system. The distinction between a switch-disconnector and a circuit breaker is especially important. A switch-disconnector provides switching and isolation functions, while overcurrent protection must be provided by a suitable protective device in the distribution system.
For replacement projects, compare the original nameplate with the proposed replacement. Confirm the 2500 A rating, voltage class, pole configuration, chassis type, and short-circuit characteristics. Also verify the compatibility of auxiliary contacts, operating accessories, interlocks, and switchboard connections.
For used or surplus equipment, request clear photographs of the nameplate, main contacts, connection assemblies, operating mechanism, and chassis interface. Confirm the mechanical condition and whether the device has been inspected or tested. Verify whether the chassis and accessories are included in the sale.
During maintenance, follow the manufacturer’s inspection and servicing procedures. Check contact condition, mechanical operation, electrical connections, position indication, and interlocking mechanisms. Any signs of overheating, abnormal contact wear, or mechanical damage should be evaluated by qualified switchgear personnel.
Because this is high-current electrical equipment, installation and maintenance must be performed under an appropriate electrical safety program. Always isolate the relevant supply, verify the absence of hazardous voltage, and follow the facility’s approved procedures before carrying out work.
The Schneider NW25HA MasterPact 2500A is a high-current device designed for industrial and commercial low-voltage power distribution. The supplied three-pole drawout configuration has dimensions of 442 × 352 × 297 mm and a weight of 60 kg. Its rated current is 2500 A, with a documented operational voltage rating of up to 690 V AC.
An important selection consideration is that Schneider’s NW25HA documentation identifies the relevant configuration as a switch-disconnector. Buyers should verify whether their installation requires a switching and isolation device or a circuit breaker with an appropriate overcurrent trip unit.
Accurate catalog-number verification, chassis compatibility, and electrical rating checks are essential when purchasing, installing, or replacing MasterPact NW25HA equipment.