Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |

The Schneider Electric NW16HA MasterPact Switch Disconnector is a high-current switching and isolation device designed for low-voltage power distribution systems. It belongs to the MasterPact NW product family and is intended for applications where large electrical circuits require reliable switching and isolation.
With a rated operational current of 1600 A, the NW16HA is suitable for use in industrial electrical distribution equipment, main switchboards, and large power distribution assemblies. Its robust construction and chassis-mounted design make it appropriate for installations where equipment isolation and circuit switching are important parts of the electrical operating procedure.
The NW16HA designation is associated with a switch-disconnector configuration rather than a conventional circuit breaker equipped with an integrated overcurrent trip unit. This distinction is important when selecting equipment for a power distribution system. A switch-disconnector provides switching and isolation functions, but it should not be assumed to provide independent overload and short-circuit protection. Where fault protection is required, an appropriately coordinated protective device must be included in the system design.
The NW16HA is designed for AC electrical networks operating at 50/60 Hz. Its rated operational voltage reaches 690 V AC, and its rated insulation voltage is 1000 V AC. The device also provides a rated short-circuit making capacity of up to 143 kA under the specified conditions.
The product is available in different mechanical arrangements, including fixed and drawout versions, with three-pole and four-pole configurations depending on the selected catalog number. The exact mounting arrangement and pole configuration should therefore be confirmed before ordering.
This product is intended for professional electrical distribution installations. Correct selection requires consideration of the system voltage, rated current, short-circuit conditions, isolation requirements, and coordination with upstream and downstream protective devices.
| Parameter | Specification |
|---|---|
| Brand | Schneider Electric |
| Product Family | MasterPact NW |
| Model | NW16HA |
| Product Type | Switch Disconnector |
| Frame Size | NW16 |
| Rated Operational Current | 1600 A |
| Rated Operational Voltage | Up to 690 V AC |
| Rated Insulation Voltage | 1000 V AC |
| Network Type | AC |
| Network Frequency | 50/60 Hz |
| Rated Short-Circuit Making Capacity | Up to 143 kA under specified conditions |
| Pole Configuration | 3P or 4P, depending on version |
| Mounting Arrangement | Fixed or drawout, depending on version |
| Control Type | Push-button |
| Suitability for Isolation | Yes |
| Contact Position Indicator | Yes |
| Connection Pitch | 115 mm |
| Dimensions Provided | 442 × 352 × 297 mm |
| Weight Provided | 60 kg |
| Product Series | MasterPact NW |
Note: The supplied dimensions and weight correspond to the 3-pole fixed NW16HA version. Other pole and mounting configurations may have different dimensions and weights. Confirm the complete catalog number before procurement.
The NW16HA is designed to provide controlled switching and electrical isolation in high-current AC distribution circuits. It forms part of the switching arrangement in a low-voltage power distribution system and allows authorized personnel to manage the connection or disconnection of a circuit according to the installation’s operating procedures.
The device is designed for a rated operational current of 1600 A. Its internal contact system provides the electrical connection required for normal circuit operation and allows the circuit to be switched according to its specified operating conditions.
In industrial distribution systems, this capability is important for managing large electrical feeders supplying production equipment, distribution panels, and other major loads.
The rated current should not be interpreted as permission to operate under every possible load condition. Actual suitability depends on operating voltage, ambient temperature, installation arrangement, and the applicable utilization category.
One of the primary functions of a switch-disconnector is to provide a means of isolating an electrical circuit.
When the device is placed in the appropriate open position, it disconnects the relevant circuit according to its design and applicable standards. This supports maintenance procedures and helps establish an isolation point for electrical work.
Isolation must always be performed according to approved safety procedures. Personnel should verify the absence of voltage using suitable test equipment and follow the site’s lockout and tagging requirements.
The NW16HA has a specified short-circuit making capacity. This parameter describes the device’s ability to close onto a circuit under defined short-circuit conditions.
It is not the same as the short-circuit breaking capacity of a protective circuit breaker. The distinction matters when engineering a switchboard because the switch-disconnector must be coordinated with a suitable protective device.
The system’s prospective fault current, upstream protection, and equipment ratings must be evaluated together.
The device includes a contact position indication function. This helps personnel identify the switching position during operation and maintenance.
Position indication is an important part of electrical distribution management, but it should not replace the required verification procedures used to establish a safe working condition.
The NW16HA uses a push-button control arrangement in the documented configuration. Its mechanical operating mechanism supports switching operations within the manufacturer’s specified operating limits.
The installation should be operated only by trained personnel who understand the equipment’s switching procedures and the electrical characteristics of the connected system.
The MasterPact NW16HA can be incorporated into large industrial electrical distribution assemblies where controlled switching and circuit isolation are required.
In a main distribution switchboard, the device can serve as a switching and isolation component for a high-current feeder. It may be used in installations supplying manufacturing equipment, plant distribution panels, and other large electrical loads.
Its 1600 A rating makes it suitable for applications designed around this current level, provided the voltage and installation conditions are also compatible.
Maintenance teams often need to isolate sections of a distribution system before inspecting or servicing equipment. A correctly selected switch-disconnector provides a designated switching point for this purpose.
The isolation arrangement must be coordinated with the facility’s safety procedures and any additional disconnecting devices required by the installation.
Large industrial facilities may use generators, transformers, and multiple distribution sections. Switch-disconnectors can form part of the switching architecture used to manage these sections.
The NW16HA may be considered for an appropriate distribution arrangement where its electrical ratings and switching characteristics satisfy the design requirements.
It should not be treated as an automatic replacement for a generator circuit breaker or protective switching device.
The device can support planned maintenance by providing a means of disconnecting a selected circuit. Its role is particularly relevant in facilities where electrical distribution equipment must be inspected or serviced without unnecessary disturbance to other parts of the installation.
A complete isolation procedure must include all relevant energy sources and appropriate verification steps.
Large manufacturing facilities use high-current distribution systems to supply production machinery, process equipment, and auxiliary electrical loads.
The NW16HA can be incorporated into suitable switchboards as a switching and isolation component for a 1600 A distribution circuit.
Power distribution panels may contain several outgoing feeders supplying different plant areas. A switch-disconnector can provide a controlled switching point for an individual feeder or distribution section.
Its use must be coordinated with the panel’s protective devices and short-circuit ratings.
Industrial transformers supply power to downstream distribution equipment. A switch-disconnector may be used in an appropriately designed transformer distribution arrangement to provide switching and isolation.
The transformer’s rated current, voltage, fault level, and protection coordination must be considered before selecting the device.
Large facilities such as data centers require organized electrical distribution and maintenance arrangements. Switch-disconnectors can form part of the distribution architecture where high-current switching and isolation are needed.
The device’s suitability depends on the electrical system design and the protection requirements of the critical load.
Infrastructure facilities may use large distribution switchboards to supply pumps, ventilation systems, auxiliary equipment, and other high-power loads.
The NW16HA may be considered where the required switching and isolation functions match its specifications.
Correct installation is essential for safe switching operation, reliable electrical connections, and long-term equipment performance.
Before installation, confirm that the system’s voltage and frequency are within the device’s specified limits.
The NW16HA has a rated operational voltage up to 690 V AC and a rated operational current of 1600 A. The actual application must also meet the required utilization category and short-circuit coordination conditions.
The product family includes different pole configurations. Confirm whether the installation requires three-pole or four-pole switching.
The number of poles affects the way the device is connected within the electrical distribution system. A different pole configuration should not be substituted without checking the system design.
The MasterPact NW16HA is available in fixed and drawout configurations.
A fixed device is installed directly in its designated mounting position. A drawout arrangement uses a compatible chassis and allows the device to be moved between its connected, test, and disconnected positions according to the equipment design.
The chassis, connection arrangement, and switchboard structure must match the selected version.
The electrical connections must be suitable for the rated current and the installation’s short-circuit conditions.
Inspect busbar dimensions, terminal interfaces, conductor preparation, connection surfaces, and tightening requirements. Poor electrical contact can result in overheating and equipment damage.
All installation work should follow the manufacturer’s instructions and applicable electrical standards.
A switch-disconnector should be used with a suitable protective arrangement when overload and short-circuit protection are required.
Engineers must evaluate the upstream circuit breaker, protective relay, or fuse arrangement. The protective device must be coordinated with the switch-disconnector’s ratings and the system’s prospective fault current.
The NW16HA should not be treated as a standalone overcurrent protection device.
Before energizing the equipment, inspect the mounting arrangement, mechanical operation, electrical connections, grounding, and contact position indication.
Verify the switching mechanism and confirm that all interlocks and operating procedures function as intended.
Commissioning should be carried out by qualified electrical personnel.
The NW16HA is normally installed as part of a larger electrical distribution assembly. The following components may be used in a compatible system, depending on the engineering design.
| Component | Function | Integration Considerations |
|---|---|---|
| Upstream circuit breaker | Provides overcurrent and short-circuit protection | Must be coordinated with the switch-disconnector |
| Protective relay | Monitors electrical conditions and initiates protective action | Select according to the system protection philosophy |
| Busbar assembly | Distributes electrical power | Must support the required current and fault withstand levels |
| Switchboard chassis | Supports the switching device | Must match the fixed or drawout arrangement |
| Current transformer | Provides current measurement for monitoring or protection | Select according to the protection and metering requirements |
| Voltage transformer | Provides voltage measurement | Confirm voltage ratio and insulation requirements |
| Power distribution panel | Houses switching and distribution equipment | Verify dimensions, ratings, and installation clearances |
| Grounding system | Provides a protective earthing path | Follow the electrical installation design |
| Auxiliary contacts | Provide switching-position signals | Confirm the contact arrangement and accessory compatibility |
These components are examples of equipment used in a complete distribution system. They are not necessarily supplied with the NW16HA.
When replacing a MasterPact NW16HA, the most important requirement is to preserve the original switching and isolation function while ensuring compatibility with the electrical distribution system.
| Alternative or Related Model | Description | Replacement Considerations |
|---|---|---|
| MasterPact NW16HA 3P Fixed | Three-pole fixed switch-disconnector | Verify the exact mounting and terminal arrangement |
| MasterPact NW16HA 3P Drawout | Three-pole withdrawable switch-disconnector | Requires a compatible chassis and drawout arrangement |
| MasterPact NW16HA 4P | Four-pole switch-disconnector configuration | Confirm neutral switching requirements and dimensions |
| MasterPact NW16H1 | Circuit breaker family variant | Not a direct equivalent; includes a different protective-device function |
| MasterPact NW16H2 | Higher-performance circuit breaker variant | Requires review of protection characteristics and system coordination |
| MasterPact MTZ Series | Newer MasterPact product family | Requires detailed mechanical and electrical compatibility assessment |
Before selecting a replacement, compare:
A circuit breaker and a switch-disconnector may have similar frame ratings but different functions. Replacing one with the other without redesigning the protection arrangement can create a serious safety risk.
The 1600 A rating makes the NW16HA suitable for appropriately designed high-current industrial distribution applications.
The device provides a mechanical switching function for managing electrical circuits within its specified operating conditions.
Its suitability for isolation supports maintenance and electrical distribution procedures when used according to the required safety practices.
The product belongs to the MasterPact NW family, which is used in large-scale low-voltage power distribution assemblies.
The product family offers different pole and mounting arrangements, allowing selection according to the switchboard design.
The contact position indicator helps personnel identify the device’s switching state during operation and inspection.
The NW16HA can be integrated into suitable main distribution boards, industrial switchboards, and high-current electrical installations.
The NW16HA is a MasterPact NW switch-disconnector designed for high-current AC power distribution and electrical isolation applications.
The NW16HA designation identifies a switch-disconnector configuration. It should not be confused with a MasterPact NW circuit breaker equipped with an overcurrent trip unit.
The rated operational current is 1600 A under the specified operating conditions.
The documented rated operational voltage is up to 690 V AC at 50/60 Hz.
The rated insulation voltage is 1000 V AC.
It has a specified short-circuit making capacity, but it should not be treated as an independent overcurrent protection device. A suitable circuit breaker, protective relay, or fuse arrangement is required where fault protection is needed.
Yes. The MasterPact NW16HA family includes fixed and drawout arrangements. The complete product configuration must be checked before ordering.
The supplied product data lists a weight of 60 kg for the three-pole fixed configuration. Other versions may have different weights.
The supplied dimensions are 442 × 352 × 297 mm. The exact dimensional drawing should be checked against the selected pole and mounting configuration before designing the switchboard.
Not automatically. A switch-disconnector does not provide the same protective function as a circuit breaker with an appropriate trip unit. Replacement requires an engineering review of the circuit protection arrangement and switching requirements.
When purchasing the Schneider Electric NW16HA, verify the complete product designation and mechanical configuration. Confirm whether the required device is three-pole or four-pole and whether the installation requires a fixed or drawout arrangement.
For replacement projects, compare the existing unit’s dimensions, mounting points, busbar connections, chassis, and auxiliary accessories. A similar frame designation does not guarantee that another MasterPact device will fit or provide the same operating function.
For used or refurbished equipment, request clear photographs of the nameplate, operating mechanism, contact areas, and connection terminals. Check the mechanical condition and request suitable inspection or functional test information.
Routine maintenance should include inspection of the contact system, mechanical operating mechanism, terminal connections, mounting structure, and position indication. Any signs of overheating, abnormal wear, or mechanical damage should be investigated by qualified personnel.
Electrical maintenance must follow the manufacturer’s instructions and the facility’s approved safety procedures. The circuit must be properly isolated and verified de-energized before work begins.
The Schneider Electric NW16HA MasterPact Switch Disconnector is a 1600 A device designed for high-current AC switching and electrical isolation in industrial power distribution systems. With a rated operational voltage of up to 690 V AC, a rated insulation voltage of 1000 V AC, and fixed or drawout configuration options, it can serve as an important switching component in appropriately engineered low-voltage switchboards.
Its function must be distinguished from that of a conventional circuit breaker. The NW16HA provides switching and isolation, while overcurrent and short-circuit protection must be provided by a suitable coordinated protective arrangement.
For maintenance and procurement projects, confirming the complete catalog configuration, pole arrangement, mounting type, and protection coordination is essential for safe and reliable operation.