ProductPRODUCT
Featured products
Contact Us
- Ingersoll Rand
- 95269320
- O-Ring
- USA
- 50 × 10 × 30 mm
- 0.1 kg
- Xiamen, China
- New & In Stock
- T/T, PayPal, Western Union
- 1 Year
- 1-3 Working Days
- DHL, UPS, TNT, FedEx and EMS.
- 24-Hour Service
- COO
- 6
Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |
Product Overview
The Ingersoll Rand 95269320 O-Ring is a replacement sealing component used in compatible Ingersoll Rand industrial compressor assemblies. It forms a seal between mating surfaces to help prevent air, oil, or other operating media from escaping through a joint. Correct selection depends on the installation location, groove design, operating pressure, temperature, and compatibility with the fluid being sealed.
The part number 95269320 appears in parts listings for Ingersoll Rand centrifugal compressors, including an O-ring entry associated with the P140 parts category. It is also listed as a replacement O-ring for selected Bobcat XHP1170 and PA1170P compressor applications. These references indicate that the part number is used across specific equipment applications, but they do not establish universal compatibility across all Ingersoll Rand compressor models. <Cite refs={[“turn207956search0″,”turn207956search1″,”turn207956search3”]}/>
In compressor systems, O-rings are commonly installed in valve bodies, fittings, covers, and other joints where a compact sealing element is required. The ring deforms under the specified assembly compression to fill the clearance between mating surfaces. This helps maintain the integrity of the joint during pressure changes, vibration, and normal operating cycles.
For maintenance personnel, the important consideration is matching the replacement to the original application. An O-ring that appears similar may have a different cross-section, material compound, or pressure and temperature capability. The installation location and required seal specifications should therefore be confirmed before replacement.
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | Ingersoll Rand |
| Model / Part Number | 95269320 |
| Product Type | O-Ring |
| Component Category | Industrial Compressor Sealing Component |
| Primary Function | Seals the interface between compatible mating components |
| Application | Specified Ingersoll Rand compressor assemblies |
| Associated Equipment | Selected centrifugal compressor and Bobcat compressor applications |
| Material | Verify against the applicable parts specification |
| Dimensions | 50 × 10 × 30 mm |
| Weight | 0.1 kg |
Product Features
- Static sealing: Helps prevent leakage at designated component interfaces.
- Compact sealing design: Fits a specified groove or sealing location when the correct part is selected.
- Equipment-specific identification: Provides a traceable part number for maintenance and replacement planning.
- Pressure-boundary support: Helps maintain joint integrity within the limits of the specified installation.
- Serviceable construction: Can be inspected and replaced when removed during authorized maintenance.
- Application-dependent compatibility: Requires verification of dimensions, material, and operating conditions before installation.
Working Principle
An O-ring seals by being compressed between two mating surfaces. When installed in a correctly designed groove, the ring deforms sufficiently to fill the available clearance and create a sealing contact around the joint. Internal pressure can increase the contact force against the sealing surfaces, depending on the groove design and operating conditions.
A typical sealing arrangement follows this pattern:
Housing or Fitting → O-Ring Groove → Compressed O-Ring → Mating Component
In a compressor assembly, the seal may be exposed to lubricating oil, compressed air, temperature fluctuations, or pressure cycling. Its performance depends on the elastomer compound, groove dimensions, surface finish, and amount of compression. Excessive compression can damage the ring, while insufficient compression may allow leakage.
During service, O-rings can develop flattening, hardening, cuts, swelling, or abrasion. Contamination in the groove or scratches on the mating surface can also compromise sealing, even when the replacement ring itself is undamaged.
Before fitting a new ring, the groove and contact surfaces should be cleaned and inspected. The replacement must match the specified material and dimensions, and any lubricant used during installation must be compatible with the seal and operating media. Avoid stretching, twisting, or pinching the ring during assembly.
Role in the Ingersoll Rand Compressor Sealing System
The 95269320 O-ring serves as a sealing element at its designated installation point. It does not regulate compressor pressure or perform filtration; instead, it helps preserve the integrity of the joint in which it is installed.
Mating Components → O-Ring Sealing Interface → Sealed Joint → Compressor Operating Circuit
| System Component | Function |
|---|---|
| Ingersoll Rand 95269320 O-Ring | Seals the designated interface between mating components |
| Housing or Valve Body | Provides the groove or sealing surface |
| Fittings and Connections | Join components within the relevant compressor circuit |
| Compressor Fluid Circuit | Carries the operating medium through the equipment |
| Fasteners or Retaining Components | Maintain the required assembled condition |
| Compressor Service Documentation | Identifies the correct installation location and seal specification |
| Maintenance Personnel | Inspect and replace the seal during authorized service |
| Maintenance Records | Track replacement history and recurring leakage issues |
Industrial Applications
| Application | Typical Use |
|---|---|
| Compatible Ingersoll Rand Centrifugal Compressors | Sealing the designated interface in the applicable assembly |
| P140 Parts Configurations | Replacement of the specified O-ring where listed |
| Bobcat XHP1170 Compressors | Servicing the identified sealing location |
| Bobcat PA1170P Compressors | Replacing the O-ring where the part reference is confirmed |
| Compressor Valve Assemblies | Maintaining sealing between compatible valve components |
| Fluid Connections | Preventing leakage at specified fittings and joints |
| Industrial Compressor Maintenance | Replacing worn or damaged seals during servicing |
| Corrective Maintenance | Addressing leakage after the affected joint has been identified |
| Compressor Overhaul Programs | Renewing designated seals during dismantling and reassembly |
| Spare-Parts Inventory Management | Tracking O-ring references for planned repairs |
Installation and Maintenance
- Verify the part number: Confirm 95269320 against the equipment parts list and the existing seal identification.
- Identify the installation point: Determine which fitting, housing, valve, or joint uses the O-ring before dismantling the assembly.
- Check the seal specification: Confirm the required material, cross-section, and operating limits rather than relying on appearance alone.
- Isolate the equipment: Follow the approved shutdown, electrical isolation, and pressure-release procedures before opening the relevant circuit.
- Remove the old seal carefully: Avoid scratching the groove or mating surfaces with sharp tools.
- Inspect the removed O-ring: Look for flattening, cuts, swelling, hardening, abrasion, or other signs of deterioration.
- Clean the groove: Remove contamination and residue using a method compatible with the component materials.
- Inspect the sealing surfaces: Check for scratches, corrosion, burrs, or damage that could compromise the replacement seal.
- Prepare the new O-ring: Confirm that it is undamaged and use only an approved installation lubricant where required.
- Fit the replacement: Position the ring evenly in its groove without twisting, stretching it excessively, or pinching it during assembly.
- Reassemble and test: Follow the specified assembly procedure and check the joint for leakage under the approved operating conditions.
- Record the maintenance: Document the part number, service date, installation location, and any defects discovered during inspection.
Compatible System Components
| Component | Function |
|---|---|
| Ingersoll Rand 95269320 O-Ring | Seals the specified mating interface |
| Compatible Compressor Housing | Provides the designated sealing groove or surface |
| Valve Body or Fitting | Forms the joint requiring the seal |
| Fasteners and Retainers | Secure the assembled components |
| Compressor Fluid Circuit | Carries air, oil, or another specified operating medium |
| Sealing Surface | Provides the contact area required for the O-ring to function |
| Approved Installation Lubricant | Assists installation where specified by the service procedure |
| Compressor Service Documentation | Defines the correct seal location and installation requirements |
| Maintenance Log | Records seal replacement and leakage investigations |
Recommended Related Models
| Model / Part Number | Product Type | Typical Application |
|---|---|---|
| Ingersoll Rand 95269320 | O-Ring | Specified centrifugal and compatible compressor applications |
| Ingersoll Rand 95210290 | O-Ring | Replacement seal for its designated compressor assembly |
| Ingersoll Rand 95018206 | O-Ring | Sealing application in compatible centrifugal compressor equipment |
| Ingersoll Rand 95018370 | O-Ring | Replacement sealing component for its specified assembly |
| Ingersoll Rand 95720280 | O-Ring | Sealing application in compatible compressor equipment |
| Ingersoll Rand 95025458 | O-Ring | Replacement seal for the specified compressor parts configuration |
Key Advantages
- Helps prevent leakage at designated compressor joints.
- Provides a specific part reference for replacement planning.
- Supports sealing integrity when correctly matched to the application.
- Can be inspected and replaced during scheduled or corrective maintenance.
- Helps maintenance teams trace seal replacements and investigate recurring leaks.
Technical FAQs
Which compressor applications are associated with part number 95269320?
Parts listings associate this reference with selected Ingersoll Rand centrifugal compressor configurations and identify it as a replacement O-ring for Bobcat XHP1170 and PA1170P applications. Confirm the exact equipment and installation point before ordering.
Does the part number alone establish the O-ring material?
No. The material compound must be verified against the applicable parts specification. Material selection affects compatibility with oil, air, temperature, and other operating conditions.
What can cause a newly installed O-ring to leak?
Common causes include an incorrect ring size, unsuitable material, a damaged groove, contaminated sealing surfaces, twisting during installation, or improper assembly. Inspect the complete joint rather than assuming the replacement seal is defective.
Can this O-ring be reused after the joint has been dismantled?
Reuse should not be assumed. Follow the equipment’s service procedure, and replace the ring if required or if it shows flattening, cuts, hardening, swelling, or other damage. A new, correctly specified seal is generally the safer choice when the joint requires renewed sealing.