• Epro PR6426/000-000+CON021/916-120 32 mm Eddy Current Sensor
  • Epro PR6426/000-000+CON021/916-120 32 mm Eddy Current Sensor
  • Epro PR6426/000-000+CON021/916-120 32 mm Eddy Current Sensor
  • Epro PR6426/000-000+CON021/916-120 32 mm Eddy Current Sensor
Product Overview The Epro PR6426/000-000 + CON021/916-120 32 mm Eddy Current Sensor is a non-contact displacement measurement assembly designed for monitoring the mechanical condition of large rotating ……
Epro PR6426/000-000+CON021/916-120 32 mm Eddy Current Sensor
  • Epro
  • PR6426/000-000+CON021/916-120
  • 32 mm Eddy Current Sensor
  • Germany
  • 32 mm
  • 0.92 kg
  • Xiamen, China
  • New & In Stock
  • T/T, PayPal, Western Union
  • 1 Year
  • 1-3 Working Days
  • DHL, UPS, TNT, FedEx and EMS.
  • 24-Hour Service
  • COO
  • 15

Our advantage

Epro PR6426/000-000+CON021/916-120 32 mm Eddy Current Sensor

Global Logistics

We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.

Epro PR6426/000-000+CON021/916-120 32 mm Eddy Current Sensor

Brand new and original

Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.

Epro PR6426/000-000+CON021/916-120 32 mm Eddy Current Sensor

24-hour service

We provide 7*24 hours service to our customers. We will be there whenever you need us.

Epro PR6426/000-000+CON021/916-120 32 mm Eddy Current Sensor

Price advantage

All our products are priced very favorably because we have our own warehouse and supply.


Company Information
E-mail [email protected]
Mobile +8615980777398
Whatsapp +8615980777398
WeChat 15980777398

Product Overview

The Epro PR6426/000-000 + CON021/916-120 32 mm Eddy Current Sensor is a non-contact displacement measurement assembly designed for monitoring the mechanical condition of large rotating machinery. It combines a PR6426 eddy current sensor with a CON021 signal converter configured for an extended measuring range.

The assembly is intended for applications where accurate monitoring of shaft movement is important to equipment protection, condition assessment, and predictive maintenance. Typical applications include steam turbines, gas turbines, hydro turbines, compressors, pumps, and large industrial fans.

Unlike contact-based measurement devices, an eddy current sensor measures the distance to a conductive target without physically touching it. The sensor generates an electromagnetic field, and changes in the interaction between this field and the metallic target are converted into an electrical signal. This allows the system to monitor shaft displacement and movement while the machinery remains in operation.

The PR6426 sensor has a 32 mm sensing head, making it suitable for installations involving relatively large shafts and substantial measurement clearances. The paired CON021/916-120 converter provides a 12.0 mm extended measuring range, with a specified linearity error of no more than ±1.5%.

The output signal can be used by compatible machinery protection and monitoring equipment to evaluate shaft position and movement. When integrated into a suitable monitoring system, the measurement data can help operators identify abnormal mechanical behavior before it develops into a more serious equipment problem.

The PR6426 and CON021 should be treated as a matched measurement chain. Sensor type, converter configuration, cable arrangement, calibration, and target material all influence measurement performance. For replacement and maintenance projects, the complete ordering designation should be checked rather than selecting a sensor based only on its diameter.

Technical Specifications

Parameter Specification
Brand Epro
Manufacturer / Product Family Epro / Emerson
Sensor Model PR6426/000-000
Signal Converter CON021/916-120
Complete Model PR6426/000-000 + CON021/916-120
Product Type Eddy Current Sensor and Signal Converter Assembly
Measurement Principle Non-contact eddy current
Sensor Head Diameter 32 mm
Converter Configuration Extended-range
Measuring Range 12.0 mm
Linearity Error ≤ ±1.5%
Standard PR6426 Static Sensor Range ±4.0 mm
Nominal Sensor Sensitivity 2 V/mm
Nominal Center Air Gap Approximately 5.5 mm
Long-Term Drift Less than 0.3%
Target Material Ferromagnetic steel
Typical Target Material 42CrMo4 steel
Operating Temperature of Sensor -35 to +175°C
Short-Term Temperature Excursion Up to 200°C for limited periods
Maximum Cable Temperature 200°C
Sensor Sleeve Material Stainless steel
Cable Insulation PTFE
Converter Supply Voltage -23 to -32 V DC
Converter Frequency Response 0 to 20 kHz (-3 dB)
Converter Rise Time Less than 15 μs
Converter Protection Class IP20
Sensor Head Diameter 32 mm
Weight Provided 0.92 kg
Typical Applications Turbines, compressors, pumps, and large rotating machinery

Note: The 12.0 mm extended measuring range is associated with the CON021/916-120 configuration. The PR6426 sensor’s standard static range and the complete sensor-converter chain’s extended range are different specifications and should not be confused.

Function and Working Principle

The PR6426/000-000 uses the eddy current principle to detect changes in the distance between the sensor head and a conductive metallic target. Its measurement method is suitable for continuous monitoring of shaft movement in rotating machinery.

1. Electromagnetic Field Generation

The sensor contains an electromagnetic coil that generates a high-frequency alternating magnetic field when energized by the compatible signal-conversion system.

When a conductive metallic target, such as a steel shaft, is positioned near the sensor head, the alternating magnetic field induces eddy currents within the target material.

These currents create an opposing electromagnetic field that affects the electrical characteristics of the sensor coil.

2. Distance Measurement

The electrical response of the sensor changes as the distance between the probe and the target changes.

When the shaft moves closer to the sensor, the electromagnetic interaction changes in one direction. When the shaft moves farther away, the response changes in the opposite direction.

The signal converter processes these variations and produces an output corresponding to the measured displacement.

This makes it possible to monitor shaft position and movement without mechanical contact between the probe and the rotating component.

3. Signal Conversion with CON021/916-120

The CON021/916-120 is the signal converter associated with the PR6426 sensor in this assembly.

It provides the electrical conditioning and conversion needed to translate the sensor’s response into a usable measurement signal. The /916-120 configuration corresponds to a 12.0 mm extended measuring range for the PR6426 sensor, with a specified linearity error of no more than ±1.5%.

The converter’s configuration is important because different CON021 versions provide different measuring ranges and linearity characteristics.

Using an incorrect converter configuration can result in inaccurate readings or an unsuitable measurement range.

4. Shaft Displacement Monitoring

The complete measurement chain can be used to monitor several types of shaft movement.

  • Radial displacement: Detects movement of the shaft perpendicular to its rotational axis.
  • Axial displacement: Monitors movement along the shaft’s rotational axis.
  • Shaft position: Provides information about the relative position of the shaft.
  • Eccentricity: Helps identify deviations in the shaft’s rotational geometry.
  • Dynamic movement: Supports the observation of changing shaft position during operation.

These measurements provide useful information for evaluating the mechanical condition of rotating equipment.

5. Continuous Condition Monitoring

When connected to a compatible machinery monitoring system, the sensor assembly can provide continuous measurement signals.

Monitoring equipment can use these signals to identify changes in shaft position and movement. Maintenance teams can then compare operating measurements with established limits and historical trends.

This approach supports condition-based maintenance and helps reduce reliance on inspections performed only during scheduled shutdowns.

Role in Industrial Machinery Protection Systems

The PR6426/000-000 + CON021/916-120 assembly is a measurement component within a broader machinery monitoring and protection arrangement. It does not independently provide a complete machine protection function.

1. Turbine Monitoring

Steam and gas turbines contain rotating shafts that operate under high mechanical and thermal loads. Shaft displacement monitoring is important for observing changes in rotor position and identifying abnormal mechanical conditions.

The PR6426 can be installed at suitable measurement locations to monitor shaft movement. Its signal can then be evaluated by compatible turbine monitoring equipment.

2. Compressor Condition Monitoring

Industrial compressors operate under changing pressure, temperature, and mechanical loading conditions.

Shaft displacement measurements can help maintenance teams evaluate rotor movement and identify changes that may be associated with bearing wear, alignment problems, or other mechanical abnormalities.

3. Integration with Machinery Monitoring Equipment

The signal converter produces a measurement output that can be connected to compatible monitoring equipment.

Depending on the system architecture, the monitoring equipment may provide:

  • Real-time displacement measurements.
  • Alarm threshold monitoring.
  • Historical measurement trends.
  • Machinery condition information.
  • Signals for plant control or protection systems.

The electrical interface, input range, and calibration requirements must be checked before connecting the assembly to a monitoring module.

4. Support for Predictive Maintenance

Continuous shaft displacement monitoring provides information that can help maintenance teams recognize gradual changes in mechanical behavior.

For example, an increase in shaft movement over time may indicate a developing mechanical issue. The measurement alone does not establish the cause, but it can help identify when additional inspection or diagnostic work is necessary.

Industrial Applications

The PR6426 32 mm eddy current sensor is designed for critical rotating machinery applications where shaft movement and position measurements are important.

1. Steam Turbines

Steam turbines operate at high rotational speeds and experience changing mechanical and thermal conditions.

Shaft displacement monitoring helps operators observe rotor movement and identify deviations from normal operating behavior. The PR6426 can be used at appropriate monitoring positions where its sensing range, target material, and mounting requirements are satisfied.

2. Gas Turbines

Gas turbines are used in power generation and industrial drive applications. Their rotating assemblies require reliable condition monitoring to support safe and stable operation.

The sensor assembly can provide non-contact displacement measurements that contribute to turbine monitoring and maintenance programs.

3. Hydro Turbines

Hydro turbines operate under changing hydraulic and mechanical loads. Monitoring shaft position and movement can help identify abnormal mechanical behavior in the rotating assembly.

A properly installed eddy current measurement chain can provide useful displacement information for these applications.

4. Industrial Compressors

Large compressors are widely used in petrochemical plants, refineries, gas processing facilities, and manufacturing operations.

Shaft movement monitoring can support the assessment of rotor condition and help identify changes that may require further mechanical investigation.

5. Industrial Pumps

Large process pumps often operate continuously and may be critical to production. Shaft displacement measurements can provide information about mechanical behavior under different operating conditions.

The sensor should be installed at an appropriate measurement location, with the target material and mounting arrangement verified.

6. Large Industrial Fans

Large fans and blowers can experience vibration and shaft movement due to operating conditions, imbalance, or mechanical wear.

An eddy current sensor can be used where the machine geometry and shaft material are suitable for non-contact displacement measurement.

Installation and System Integration

Correct installation is essential for obtaining stable and repeatable measurements from the PR6426 sensor assembly.

1. Select the Correct Measurement Position

Before installation, determine the required measurement direction and the shaft location to be monitored.

For radial displacement measurement, the sensor should be positioned perpendicular to the shaft surface. For axial displacement measurement, the installation geometry must allow the sensor to measure the relevant axial target surface.

The sensor location should provide a suitable measurement target and avoid interference from nearby metallic structures.

2. Verify the Target Material

Eddy current measurement performance depends on the electrical and magnetic properties of the target material.

The PR6426 is specified for ferromagnetic steel targets, with 42CrMo4 commonly used as the standard target material.

If the actual shaft material differs, verify the measurement characteristics and calibration requirements before commissioning.

3. Set the Initial Air Gap

The sensor must be positioned at the correct initial distance from the target.

The nominal center air gap for the PR6426 is approximately 5.5 mm under its standard sensor specification. The final installation gap must also account for the selected converter configuration and the manufacturer’s installation instructions.

An incorrect air gap can reduce the available measurement range or cause the output to operate outside its intended linear region.

4. Install the Sensor Securely

The sensor sleeve and mounting arrangement should be installed according to the manufacturer’s mechanical recommendations.

The mounting structure must resist vibration and prevent the sensor from moving during machine operation. The probe cable should be routed carefully to avoid excessive bending, abrasion, and contact with hot or moving components.

For high-temperature machinery, verify that the cable section and connector arrangement remain within their specified temperature limits.

5. Connect the Signal Converter

The PR6426 sensor must be paired with the correct CON021 signal converter configuration.

For this assembly, the converter designation is CON021/916-120. Confirm the sensor connection, converter supply voltage, output terminals, and cable arrangement before energizing the measurement chain.

The converter requires an appropriate DC supply within its specified operating range. Incorrect polarity or wiring can prevent correct operation or damage the equipment.

6. Calibrate and Verify the Measurement Chain

After installation, verify the measurement output using suitable test equipment and the manufacturer’s commissioning procedure.

Check the initial air gap, zero reference, measurement direction, output response, and converter configuration.

Where possible, compare the measurement against a known mechanical reference. Calibration should be performed using the complete sensor and converter combination rather than treating either component as an independent measurement device.

7. Integrate with the Monitoring System

Connect the converter output to a compatible machinery monitoring input.

Confirm the receiving module’s input range, signal scaling, grounding arrangement, and alarm configuration. The monitoring system should be configured to interpret the sensor output correctly across the selected measuring range.

Compatible System Components

The PR6426/000-000 and CON021/916-120 form a measurement chain that requires suitable power, cabling, and monitoring equipment.

Component Function Compatibility Considerations
PR6426/000-000 sensor Detects shaft displacement without contact Must match the target material and required measurement geometry
CON021/916-120 converter Conditions the sensor signal Provides the specified 12.0 mm extended-range configuration
Sensor extension cable Connects the sensor to the converter Verify cable length, connector type, and cable protection
Machinery monitoring module Receives and evaluates measurement signals Confirm input range and signal scaling
Vibration monitoring system Evaluates shaft movement and machine condition Must support the selected measurement signal
Industrial DC power supply Supplies the converter Verify the required negative DC supply range and polarity
Sensor mounting hardware Secures the probe at the measurement position Must maintain mechanical stability and correct air gap
Ferromagnetic shaft target Provides the measurement surface Material and target geometry affect calibration
Industrial control system Uses monitoring information for plant operation Integration depends on the monitoring architecture

The components listed above describe a typical measurement arrangement. They are not necessarily all included in the product package. Confirm the actual supplied configuration before ordering.

Alternative Models and Replacement Considerations

The PR6426 belongs to the Epro PR 642x eddy current sensor family. Other sensor models may be considered for different shaft sizes and measurement requirements, but they should not be treated as direct replacements without checking the complete measurement chain.

Model or Component Description Replacement Considerations
PR6422 Small-diameter eddy current sensor Intended for different installation geometry and measurement requirements
PR6423 Eddy current displacement sensor Uses a different sensing-head size and measurement configuration
PR6424 Eddy current sensor with a 16 mm sensing head May suit installations with different clearance requirements
PR6425 Eddy current sensor for specific shaft monitoring applications Requires its corresponding converter configuration
PR6426 32 mm eddy current sensor The relevant sensor family for this assembly
CON021/916-120 Extended-range signal converter Configured for 12.0 mm measurement range with PR6426
CON021/916-160 Extended-range signal converter Provides a different measuring range and linearity specification
CON021/916-200 Extended-range signal converter Provides a different measuring range and linearity specification
CON021/916-240 Extended-range signal converter Provides a different measuring range and linearity specification

When replacing the sensor assembly, compare the following details:

  • Complete PR6426 sensor designation.
  • CON021 converter ordering number.
  • Measuring range and linearity specification.
  • Sensor head diameter and mounting arrangement.
  • Cable length and connector type.
  • Target material and shaft geometry.
  • Initial air gap and measurement direction.
  • Converter supply voltage and output characteristics.
  • Compatibility with the installed monitoring equipment.

A converter with a different suffix may provide a different measuring range. It should not be substituted solely because it belongs to the same CON021 family.

Key Advantages

Non-Contact Measurement

The eddy current principle allows shaft displacement to be measured without physical contact. This avoids mechanical contact between the probe and the rotating target during normal operation.

32 mm Sensing Head

The PR6426 uses a 32 mm sensing head designed for large-shaft measurement applications where its physical dimensions and measurement characteristics are appropriate.

Extended Measuring Range

The CON021/916-120 configuration provides a 12.0 mm extended measuring range for the PR6426 measurement chain, supporting applications requiring a wider range than the standard configuration.

High-Resolution Dynamic Monitoring

The measurement chain supports dynamic displacement monitoring and can be integrated into compatible machinery monitoring equipment.

Wide Temperature Capability

The PR6426 sensor is designed for demanding machinery environments, with a specified continuous operating temperature range of -35 to +175°C and limited short-term temperature excursions up to 200°C.

Industrial Machinery Compatibility

The sensor family is intended for critical rotating machinery such as turbines, compressors, pumps, and fans.

Support for Condition-Based Maintenance

Continuous measurement data can help maintenance teams recognize changes in shaft movement and investigate potential mechanical problems.

Technical FAQs

1. What is the Epro PR6426/000-000 + CON021/916-120?

It is an eddy current measurement assembly consisting of a PR6426 32 mm sensor and a CON021/916-120 signal converter. It is designed for non-contact shaft displacement monitoring in large rotating machinery.

2. What is the sensor head diameter?

The PR6426 sensor has a 32 mm sensing head diameter.

3. What is the measuring range of the CON021/916-120?

The CON021/916-120 configuration provides a 12.0 mm extended measuring range when paired with the PR6426 sensor.

4. What is the difference between the PR6426 sensor and the CON021 converter?

The PR6426 is the sensing element installed near the shaft. It detects changes in the distance to the metallic target. The CON021 converter processes the sensor response and produces a usable measurement signal.

Both components are required for the specified measurement chain.

5. What is the measurement principle?

The assembly uses the eddy current principle. An alternating electromagnetic field interacts with the conductive shaft surface, and changes in this interaction are used to determine the distance between the sensor and the target.

6. What machinery can use this sensor?

Typical applications include steam turbines, gas turbines, hydro turbines, industrial compressors, pumps, and large fans. Suitability depends on the shaft material, geometry, temperature, and installation requirements.

7. Does the sensor require physical contact with the shaft?

No. The PR6426 measures displacement without touching the rotating shaft. A suitable initial air gap must be maintained throughout operation.

8. What target material is recommended?

Ferromagnetic steel is the specified target material, with 42CrMo4 used as a standard reference material. Different target materials may affect measurement characteristics and require verification.

9. Can the CON021/916-120 be replaced with another CON021 model?

Not automatically. Different CON021 configurations have different measurement ranges and linearity specifications. The replacement converter must be compatible with the PR6426 sensor and the intended measurement range.

10. What should be checked before purchasing this assembly?

Verify the complete sensor and converter part numbers, sensor head diameter, measuring range, cable and connector arrangement, physical condition, and compatibility with the existing machinery monitoring system. For critical applications, request appropriate functional testing and calibration information.

Procurement and Maintenance Recommendations

When purchasing the Epro PR6426/000-000 + CON021/916-120, verify that the supplied equipment matches the complete ordering designation. The sensor and converter should be treated as a matched measurement assembly, especially when replacing equipment in an existing machinery protection system.

For new, unused, or refurbished units, check the sensor head for physical damage, contamination, or signs of mechanical impact. Inspect the cable insulation and connector condition, and confirm that the converter housing and terminals are intact.

During installation, ensure that the sensor mounting arrangement is mechanically stable and that the specified air gap is maintained. Avoid routing the cable near sources of excessive heat, mechanical abrasion, or electrical interference.

For ongoing maintenance, review measurement trends and compare them with established machine operating limits. Unexpected changes should be investigated together with other available condition-monitoring information rather than interpreted from a single measurement alone.

Keep records of the installed sensor position, converter configuration, cable arrangement, calibration values, and monitoring-system settings. These records are useful when replacing components or investigating abnormal readings.

Conclusion

The Epro PR6426/000-000 + CON021/916-120 32 mm Eddy Current Sensor is a non-contact displacement measurement assembly developed for monitoring large rotating machinery. Its PR6426 sensing head detects shaft movement, while the CON021/916-120 converter provides a 12.0 mm extended measuring range with a specified linearity error of no more than ±1.5%.

With applications in turbines, compressors, pumps, and large industrial fans, this measurement assembly can contribute to machinery condition monitoring and maintenance planning. Correct sensor positioning, target material verification, converter matching, and calibration are essential for reliable measurement performance.

For replacement and procurement projects, the complete model designation should be checked to ensure that the sensor, converter, and existing monitoring equipment operate together as an appropriate measurement chain.



Related Products

Get the latest price? We will reply as soon as possible (within 12 hours)

No:77501