Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |

The Epro PR6424/118-021 16 mm Eddy Current Sensor is a non-contact displacement sensor designed for monitoring the operating condition of rotating machinery. It belongs to the PR6424 sensor family developed for industrial machinery protection and condition-monitoring applications. The product is associated with the EPRO instrumentation range from Emerson.
Unlike contact-based measurement devices, an eddy current sensor measures the distance between its probe tip and a conductive target without requiring physical contact. This makes it suitable for monitoring rotating shafts in equipment where continuous measurement of vibration, displacement, and position is important.
The PR6424 series is commonly used in steam turbines, gas turbines, hydro turbines, compressors, pumps, and industrial fans. These machines operate under mechanical and thermal loads that can change during startup, normal operation, and shutdown. Monitoring shaft movement helps operators and maintenance engineers identify abnormal conditions before they develop into more serious equipment problems.
The PR6424 family uses a 16 mm sensor head and an electromagnetic eddy current measurement principle. Its typical sensitivity is 4 V/mm, with a specified linearity of up to ±1.5%. The series provides a static measurement range of ±2.0 mm and a dynamic measurement range of 0 to 1,000 μm under the applicable measurement conditions.
The sensor is intended to operate as part of a complete measurement system. A compatible signal converter or monitoring input is required to process the probe signal and provide usable measurement information to machinery protection or condition-monitoring equipment.
The PR6424/118-021 is identified by its complete ordering code, which should be retained when sourcing replacement equipment. Cable length, connector arrangement, mounting details, and other configuration-specific characteristics should be checked against the actual product label and applicable ordering documentation.
| Parameter | Specification |
|---|---|
| Brand | EPRO |
| Manufacturer | Emerson |
| Model | PR6424/118-021 |
| Product Series | PR6424 |
| Product Type | Eddy Current Displacement Sensor |
| Measurement Technology | Non-contact eddy current |
| Sensor Head Diameter | 16 mm |
| Typical Sensitivity | 4 V/mm |
| Linearity | ≤ ±1.5% |
| Static Measurement Range | ±2.0 mm |
| Dynamic Measurement Range | 0 to 1,000 μm |
| Nominal Center Air Gap | Approximately 2.7 mm |
| Typical Target Material | Ferromagnetic steel |
| Standard Reference Target | 42CrMo4 steel |
| Recommended Shaft Diameter | ≥80 mm |
| Sensor Sleeve Material | Stainless steel |
| Cable Material | PTFE |
| Sensor Head Pressure Resistance | 10,000 hPa (145 psi) |
| Shock and Vibration Reference | 5 g at 60 Hz at 25°C |
| Sensor Weight Provided | 0.2 kg |
| Typical Applications | Turbines, compressors, pumps, fans, and generators |
Note: The technical values above describe the PR6424 sensor family. Exact cable length, connector type, mounting thread, and temperature limits should be confirmed for the complete PR6424/118-021 configuration.
The PR6424/118-021 operates using the eddy current measurement principle. It generates an electromagnetic field at the sensor tip and measures changes in that field when a conductive target moves relative to the probe.
This principle allows the sensor to monitor shaft movement without physical contact, making it particularly useful for high-speed rotating machinery.
An electrical oscillator inside the associated measurement circuit supplies a high-frequency signal to the sensor coil. The coil produces an alternating electromagnetic field around the probe tip.
When a conductive metal surface approaches the sensing area, the electromagnetic field interacts with the target material.
The sensor’s response depends on the distance between the probe and the target, as well as the target’s electrical and magnetic properties.
The alternating electromagnetic field induces circulating electrical currents, known as eddy currents, in the conductive target.
These currents generate an opposing magnetic field that changes the electrical characteristics of the sensor coil. The resulting impedance variation is related to the distance between the probe tip and the target surface.
A compatible signal converter processes this change and produces an electrical output representing the measured gap.
The sensor can measure changes in the distance between its tip and a rotating shaft. When the shaft moves closer to or farther away from the probe, the measurement signal changes accordingly.
This allows the monitoring system to evaluate shaft displacement, vibration amplitude, and other mechanical movement characteristics.
The PR6424 family has a typical sensitivity of 4 V/mm. Within its specified linear measurement region, changes in the probe gap produce corresponding changes in output voltage.
Static displacement measurement is used to evaluate the relative position of a shaft or other conductive target.
This function can help identify changes in shaft position caused by thermal expansion, mechanical loading, bearing movement, or other operating conditions.
The PR6424 family provides a static measuring range of ±2.0 mm under its specified measurement conditions.
Dynamic measurement focuses on rapid changes in the distance between the sensor and the rotating shaft.
As the shaft rotates, mechanical vibration or displacement can produce periodic changes in the sensor output. Monitoring equipment can analyze these changes to evaluate vibration amplitude and operating behavior.
The sensor can therefore contribute to machinery protection and predictive maintenance systems.
The PR6424/118-021 is typically used as a sensing component within a larger machinery monitoring arrangement. Its output must be processed by compatible electronics before it can be interpreted by operators or control systems.
Shaft vibration is an important indicator of rotating equipment condition. Excessive vibration may be associated with rotor imbalance, misalignment, bearing problems, looseness, or other mechanical abnormalities.
An eddy current probe measures the relative movement between its tip and the shaft surface. When installed at the correct measurement position, the sensor can provide information used to evaluate shaft vibration.
Axial displacement refers to movement along the shaft’s longitudinal axis.
In turbines and compressors, excessive axial movement can indicate changes in thrust-bearing condition, rotor positioning, or mechanical loading.
A suitable probe arrangement can monitor this movement and provide measurement information to a machinery protection system.
The sensor can also be used to monitor shaft position and eccentricity.
Eccentricity refers to the deviation of a rotating shaft from its ideal geometric center. Changes in eccentricity may affect vibration behavior and machine operating stability.
By continuously measuring the distance between the probe and shaft, the monitoring system can track changes in the shaft’s relative position.
With an appropriate target arrangement, eddy current probes can be used for speed or key-related measurements.
A rotating shaft feature or target produces a changing sensor signal as it passes the probe. The monitoring system can process the signal to determine rotational speed or identify a reference position.
The exact measurement method depends on the target geometry, probe installation, and monitoring electronics.
The PR6424 series is designed for machinery where non-contact shaft measurement is required. The following applications illustrate common uses of this sensor technology.
Steam turbines operate at high rotational speeds and experience thermal and mechanical loading during operation.
The sensor can be incorporated into a turbine monitoring system to measure shaft vibration, axial displacement, and relative shaft position.
These measurements help operators evaluate rotor behavior during startup, normal operation, and shutdown.
Gas turbines are used in power generation and industrial processing facilities. Their rotating assemblies require continuous monitoring to maintain safe and stable operation.
Eddy current sensors can provide shaft displacement information for machinery protection systems.
Measurement data may help maintenance personnel identify abnormal rotor movement and investigate changes in machine condition.
Large compressors are commonly installed in chemical plants, refineries, gas-processing facilities, and other process industries.
Shaft vibration and displacement measurements are important for evaluating rotor stability and bearing performance.
A compatible PR6424 probe arrangement can provide non-contact measurements for compressor condition monitoring.
Industrial pumps operate under changing pressure, flow, and mechanical loading conditions.
Where shaft monitoring is required, eddy current sensors can provide displacement information without contacting the rotating shaft.
This can be useful in critical process pumps where unexpected mechanical problems may interrupt production.
Large fans and ventilation equipment may operate continuously in power plants, manufacturing facilities, and industrial processing systems.
The sensor can support shaft vibration monitoring when installed as part of a suitable machinery monitoring arrangement.
Continuous measurement can help identify changes in mechanical behavior and support planned maintenance.
Generators and other rotating machines require reliable monitoring of shaft movement and vibration.
The PR6424 sensor family can be used in compatible monitoring installations to measure shaft displacement and provide information for equipment condition assessment.
Proper installation is essential for accurate measurement. The sensor must be correctly positioned relative to the target surface and connected to compatible measurement electronics.
Before installation, confirm that the sensor is marked PR6424/118-021.
The complete ordering code is important because different PR6424 variants may have different cable lengths, connector arrangements, mounting configurations, and other mechanical details.
Do not assume that two sensors with the same 16 mm probe diameter are directly interchangeable.
The sensor should be installed at the measurement location specified by the machinery design.
For shaft displacement monitoring, the probe must be positioned so that its sensing axis is correctly aligned with the target surface.
The mounting arrangement should prevent unwanted movement or loosening during machine operation.
The sensor head should also be installed with sufficient clearance from surrounding metallic objects, because nearby conductive materials can influence the electromagnetic field and affect measurement performance.
The initial gap between the probe tip and target surface is an important installation parameter.
The PR6424 family has a nominal center air gap of approximately 2.7 mm. The actual installation gap should be established according to the applicable sensor specification and converter configuration.
Incorrect gap adjustment may result in an output signal outside the intended linear measuring range.
The sensor should be connected to compatible EPRO measurement electronics.
The converter supplies the sensor excitation and processes the probe response into a measurement signal suitable for the monitoring system.
The connection arrangement must match the exact sensor cable and connector configuration. Check the cable identification and connector type before making electrical connections.
The sensor cable should be routed away from sources of excessive electrical interference and mechanical damage.
Avoid sharp bends, crushing, excessive tension, or contact with hot surfaces beyond the cable’s specified temperature limits.
The PR6424 family uses PTFE cable insulation. However, the permitted temperature and mechanical limits must be checked for the complete cable configuration.
After installation, verify the initial air gap, sensor output, converter configuration, and monitoring channel response.
Where required, perform a calibration check using the appropriate test equipment and procedures.
Confirm that the measurement signal changes correctly when the target distance changes. Record the final installation gap and relevant channel settings for future maintenance.
The PR6424/118-021 should be treated as part of a complete displacement measurement system. Its operation depends on compatible signal conditioning and monitoring equipment.
| Component | Function | Integration Considerations |
|---|---|---|
| PR6424 sensor | Detects target displacement without physical contact | Confirm exact probe variant and mechanical configuration |
| CON 011 converter | Provides signal conditioning for compatible PR6424 sensors | Verify the sensor connector and converter compatibility |
| CON 021 converter | Processes compatible eddy current sensor signals | Confirm the applicable model and electrical configuration |
| CON 031 converter | Provides a compatible measurement interface in supported configurations | Check wiring and output requirements |
| CON 041 converter | Supports compatible sensor measurement arrangements | Confirm the exact system documentation |
| Machinery protection monitor | Evaluates vibration and displacement signals | Verify input type, sensitivity, and channel configuration |
| PLC or DCS | Uses monitoring information for automation and process coordination | Integration depends on the monitoring system’s available outputs |
| Industrial control cabinet | Houses monitoring and signal-conditioning equipment | Provide suitable environmental and electrical protection |
The components listed above are examples of equipment used in compatible measurement architectures. Compatibility must be confirmed against the exact probe and monitoring-system documentation.
When replacing a PR6424/118-021, the complete sensor configuration should be checked rather than selecting a substitute based only on the 16 mm probe diameter.
| Alternative or Related Product | Replacement Considerations |
|---|---|
| Other PR6424 variants | Compare cable length, connector, mounting thread, and probe configuration |
| PR6424 16 mm sensor family | Shares the general measurement principle and family specifications, but individual variants may differ |
| PR6423 sensor family | A related EPRO eddy current sensor family; verify mechanical and electrical compatibility |
| PR6426 sensor family | A different EPRO sensor family that requires its own matching system configuration |
| Compatible Emerson measurement system | May be considered when upgrading or replacing the complete measurement channel |
Before selecting a replacement, compare:
A sensor with the same nominal diameter may not provide the same measurement characteristics or connection arrangement.
The eddy current principle allows the sensor to measure shaft movement without physical contact. This is particularly useful for rotating machinery operating at high speeds.
The 16 mm probe head supports installation in suitable machinery monitoring locations where a compact measurement probe is required.
The PR6424 family supports both static displacement and dynamic shaft movement measurement, allowing one sensor technology to contribute to multiple machinery monitoring functions.
The typical sensitivity of 4 V/mm supports the detection of small changes in probe-to-target distance within the specified linear range.
The sensor family is designed for critical rotating machinery such as turbines, compressors, pumps, and fans.
When paired with suitable signal converters and monitoring electronics, the sensor can provide displacement information for machinery protection and condition-monitoring applications.
The stainless-steel sleeve and PTFE cable construction are intended for industrial sensor installations. Actual environmental suitability depends on the complete probe and cable configuration.
The PR6424/118-021 is a 16 mm eddy current displacement sensor used for non-contact measurement of shaft movement in rotating machinery.
The supplied specification identifies a 16 mm sensor head diameter.
The sensor uses electromagnetic induction. Its alternating electromagnetic field induces eddy currents in a conductive target, and changes in the sensor’s electrical response are used to determine the distance between the probe and the target.
The typical sensitivity is 4 V/mm, equivalent to approximately 101.6 mV/mil.
The PR6424 family has a specified static measurement range of ±2.0 mm under the applicable measurement conditions.
Yes. When installed with a compatible converter and monitoring system, the sensor can measure dynamic changes in shaft position that are used for vibration monitoring.
The PR6424 family is specified for conductive ferromagnetic targets. The standard reference material is 42CrMo4 steel. Target material and surface characteristics should be considered during calibration and installation.
No. It normally requires compatible signal-conditioning electronics and a monitoring input to convert and interpret its measurement signal.
The supplied product weight is 0.2 kg. The PR6424 family specification sheet lists approximately 200 grams for the sensor with a 1 m cable and without armor.
Confirm the complete model number, sensor diameter, mounting arrangement, cable length, connector type, measurement sensitivity, initial gap, and converter compatibility. These details are essential for maintaining accurate measurement and reliable machinery protection.
When purchasing the Epro PR6424/118-021, verify the complete model number and compare it with the sensor installed in the machinery. The 16 mm probe diameter alone is not sufficient to establish replacement compatibility.
For spare-parts procurement, confirm the cable length, connector arrangement, mounting thread, cable protection, and sensor condition. If the sensor is supplied with accessories, check whether those accessories match the original measurement system.
For used or refurbished equipment, inspect the probe tip, sleeve, cable insulation, connector, and identification markings. Mechanical damage or cable defects may affect measurement stability even if the sensor appears externally intact.
During maintenance, check the probe mounting, cable routing, connector condition, and initial air gap. Monitor the measurement channel for unexpected signal drift or sudden changes that may indicate sensor damage, wiring problems, or changes in the target surface.
It is also advisable to keep records of sensor installation positions, converter settings, calibration information, and replacement dates. These records can help maintenance personnel compare measurements over time and investigate changes in machinery condition.
The Epro PR6424/118-021 16 mm Eddy Current Sensor is designed for non-contact shaft displacement and vibration measurement in industrial rotating machinery. Its PR6424 family specifications include a typical sensitivity of 4 V/mm, linearity of up to ±1.5%, a static measurement range of ±2.0 mm, and a nominal center air gap of approximately 2.7 mm.
When paired with compatible signal-conditioning and monitoring equipment, the sensor can support machinery protection and condition-monitoring applications in turbines, compressors, pumps, fans, and generators.
For replacement and maintenance projects, confirming the complete ordering code and connection configuration is essential. Correct installation, air-gap adjustment, cable protection, and converter compatibility help maintain reliable measurement performance.