Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |

The Siemens 6AG2136-6BA00-1CA0 SIPLUS ET 200SP F-DI Safety Input Module is a fail-safe digital input module designed for safety-related signal acquisition in industrial automation systems. It belongs to the Siemens SIPLUS ET 200SP product family and is based on the standard ET 200SP safety input module 6ES7136-6BA00-0CA0.
This module is designed to monitor signals from safety-related field devices and transfer their status to a safety controller through the distributed I/O system. Typical signal sources include emergency-stop devices, safety switches, protective door contacts, and other compatible safety sensors. By collecting these signals, the module supports safety logic used to monitor machine conditions and initiate appropriate protective responses.
The 6AG2136-6BA00-1CA0 provides eight fail-safe digital inputs operating with a 24 V DC signal system. It supports PROFIsafe communication and can achieve safety levels up to Performance Level e according to ISO 13849-1 and SIL 3 according to IEC 61508 when used within an appropriately engineered and validated safety system.
As a SIPLUS product, this version includes conformal coating and enhanced environmental specifications compared with its standard-based counterpart. Its specified operating temperature range is -30 to +60 °C, with temporary operation at +70 °C for up to 10 minutes under the stated conditions.
With a compact 15 mm module width, the F-DI module is suitable for space-efficient ET 200SP distributed I/O installations. It can be used in industrial control cabinets where safety signals need to be collected close to machines, production equipment, and process systems.
The module is intended for applications where reliable safety signal acquisition is an important part of the machine or plant protection concept. Its actual safety performance depends on the complete safety architecture, including field devices, wiring, controller configuration, communication, diagnostics, and validation.
| Parameter | Specification |
|---|---|
| Brand | Siemens |
| Product Series | SIPLUS ET 200SP |
| Model | 6AG2136-6BA00-1CA0 |
| Product Type | F-DI Safety Digital Input Module |
| Product Designation | F-DI 8x24VDC HF |
| Base Standard Model | 6ES7136-6BA00-0CA0 |
| Number of Digital Inputs | 8 fail-safe inputs |
| Rated Supply Voltage | 24 V DC |
| Permissible Voltage Range | 20.4–28.8 V DC |
| Safety Communication | PROFIsafe |
| Maximum Safety Level | PL e according to ISO 13849-1 |
| Safety Integrity Level | SIL 3 according to IEC 61508 |
| Conformal Coating | Included |
| Operating Temperature | -30 to +60 °C |
| Temporary Temperature | +70 °C for up to 10 minutes, subject to specified conditions |
| Compatible BaseUnit | BU type A0 |
| Module Width | 15 mm |
| Dimensions Provided | 15 × 73 × 58 mm |
| Weight Provided | 0.064 kg |
| Product Lifecycle | Discontinued |
| Successor Model | 6AG2136-6BA01-2CA0 |
Note: Confirm the exact hardware revision, BaseUnit compatibility, and safety configuration before installation or replacement.
The primary function of the 6AG2136-6BA00-1CA0 is to acquire safety-related digital signals and make their status available to a compatible safety automation controller.
Unlike a standard digital input module, a fail-safe input module is designed for safety applications. It incorporates diagnostic and monitoring functions intended to help identify certain signal, wiring, and module faults. These functions support the safety controller’s ability to evaluate field conditions and execute the configured safety response.
The module provides eight fail-safe digital input channels for compatible 24 V DC field signals.
Typical connected devices include emergency-stop buttons, safety gate switches, and other safety-related sensors. When a field device changes state, the module detects the corresponding input condition and transfers the information through the ET 200SP system.
The safety controller evaluates these signals according to the configured safety program. For example, an open protective door may cause the controller to request a machine stop or prevent a hazardous operation from starting.
The module supports PROFIsafe, a safety communication protocol used in industrial automation systems.
PROFIsafe enables safety-related data to be exchanged between compatible field devices and safety controllers over an appropriately configured communication network. It includes mechanisms designed to detect communication errors and support the integrity of safety-related data.
The module’s safety functionality must be configured in a compatible Siemens automation environment. Correct device configuration, safety addresses, communication parameters, and controller programming are essential.
Diagnostic functions help identify abnormal operating conditions that could affect input signal acquisition or module operation.
Depending on the system configuration, diagnostics may help maintenance personnel investigate channel faults, supply problems, wiring abnormalities, or module-related errors.
These diagnostic capabilities can improve fault identification and maintenance efficiency. However, they do not eliminate the need for regular inspection, functional testing, and validation of the complete safety system.
The module uses a nominal 24 V DC supply and supports a permissible voltage range of 20.4–28.8 V DC.
This voltage level is widely used for industrial control signals. It allows the module to work with compatible safety sensors and switching devices designed for 24 V DC applications.
The field wiring, sensor output type, electrical characteristics, and channel configuration must follow the applicable Siemens documentation.
The SIPLUS version includes conformal coating on the electronic assemblies. This provides additional protection against certain environmental influences compared with an uncoated standard module.
Its specified temperature range extends from -30 to +60 °C, with temporary operation at +70 °C for up to 10 minutes under the stated conditions.
The coating does not make the module waterproof or suitable for unrestricted exposure to aggressive chemicals, condensation, or conductive contamination. The installation environment must still meet the product’s protection requirements.
The 6AG2136-6BA00-1CA0 operates as part of a distributed safety I/O architecture. It collects field signals and transfers them to a compatible safety controller, which evaluates the information and determines the required safety response.
The module can be used with a compatible Siemens safety automation system. Safety logic evaluates the input conditions and coordinates the required response when an unsafe condition is detected.
For example, an emergency-stop signal can be processed by the safety controller to initiate a defined shutdown sequence.
The module does not independently determine the complete machine safety response. Its function is to acquire safety-related input signals within the wider safety architecture.
ET 200SP provides a modular distributed I/O platform. Installing safety input modules close to machines or production equipment can reduce the distance between field devices and the I/O station.
This arrangement can simplify cabinet design and help organize standard and safety-related signals within a structured automation system.
The module can support safety monitoring functions involving:
The exact application depends on the selected field devices, wiring architecture, safety controller, and validated safety program.
Safety-related input information may be coordinated with standard PLC functions through an appropriately designed automation architecture.
For example, standard control logic can use machine status information to coordinate production sequences, while safety logic independently manages protective functions.
The separation and interaction of standard and safety-related functions must follow the applicable machine safety requirements.
The Siemens SIPLUS ET 200SP F-DI module is suitable for industrial installations that require fail-safe digital signal acquisition and enhanced environmental specifications.
Manufacturing equipment often includes moving components, automated workstations, and operator access points. Safety input modules can collect signals from emergency-stop devices and protective switches.
The safety controller evaluates these signals and initiates the configured response when a protective condition is activated.
Packaging systems frequently use conveyors, rotating equipment, cutters, and automated handling mechanisms. Safety-related input signals are required to monitor access doors, protective covers, and emergency-stop devices.
The F-DI module can provide a centralized or distributed method of acquiring compatible safety signals within the ET 200SP architecture.
Conveyors, transfer stations, and automated material-handling equipment may require protective devices to monitor operator access and hazardous movement.
Safety input signals can be evaluated by a compatible safety controller to coordinate machine stops and prevent unsafe operation.
Production facilities may use distributed safety I/O to monitor multiple machines and process areas. The compact design of the ET 200SP system supports modular installation in control cabinets.
The SIPLUS conformal coating and extended temperature specifications can be useful when the installation environment requires additional environmental tolerance.
SIPLUS products include versions designed for demanding environmental conditions. This model’s product designation and specifications identify it as a SIPLUS extreme RAIL-related variant.
For railway or transportation applications, engineers must additionally verify the applicable sector-specific requirements, product documentation, and system approvals. The module’s general safety ratings should not be treated as automatic approval for every railway safety application.
Correct installation is essential for reliable input acquisition and the safe operation of the complete automation system.
Before installation, confirm that the module is being used with a compatible ET 200SP station and the specified BU type A0 BaseUnit.
Check the station configuration, module order, interface module, and safety controller compatibility. The engineering project must identify the correct module and hardware configuration.
The module has a rated supply voltage of 24 V DC, with an allowable range of 20.4–28.8 V DC.
Verify the power supply capacity, voltage stability, grounding arrangement, and wiring polarity. Supply voltage outside the permitted range may affect module operation and diagnostics.
Connect compatible emergency-stop devices, protective switches, and other safety sensors according to the manufacturer’s wiring instructions.
Pay attention to channel assignment, sensor output characteristics, wiring topology, and the configured diagnostic functions. Incorrect wiring can prevent the system from detecting certain faults as intended.
Configure the module in the appropriate Siemens engineering environment and assign the required PROFIsafe parameters.
Check the safety address, communication settings, device configuration, and safety program. Any modification to the safety configuration should be controlled, documented, and validated.
After installation, test the connected safety devices and verify that the safety controller responds correctly to each required input condition.
Testing should cover normal operation, activation of protective devices, fault conditions, and recovery procedures. The complete safety function must be validated against the machine’s risk assessment and applicable standards.
The module has conformal coating and an extended specified operating temperature range. Nevertheless, the control cabinet should provide suitable protection from moisture, excessive dust, corrosive substances, and mechanical damage.
Maintain appropriate temperature conditions and ensure that the ET 200SP station is installed according to the manufacturer’s requirements.
The 6AG2136-6BA00-1CA0 is designed for use within a compatible Siemens ET 200SP safety automation system.
| Component | Function | Integration Considerations |
|---|---|---|
| ET 200SP Interface Module | Connects the distributed I/O station to the automation network | Verify network and controller compatibility |
| BU Type A0 BaseUnit | Provides the module mounting and electrical connection | Confirm the required BaseUnit type |
| Siemens F-CPU | Executes safety-related control logic | Verify supported safety configuration and firmware |
| 24 V DC Power Supply | Provides operating power for the station and field circuits | Confirm voltage and current requirements |
| Safety Sensors | Detect hazardous conditions or protective device states | Verify electrical and functional compatibility |
| Emergency-Stop Devices | Provide emergency stop signals | Use approved devices and validated wiring |
| Protective Door Switches | Monitor machine access points | Confirm the required safety architecture |
| PROFIsafe Network | Transfers safety-related data | Configure compatible communication parameters |
| ET 200SP Standard I/O Modules | Collect standard process signals | Maintain correct module arrangement and system configuration |
The components listed above are examples of equipment that may form part of a complete installation. They are not necessarily supplied with the F-DI module.
The 6AG2136-6BA00-1CA0 has been discontinued. Siemens identifies 6AG2136-6BA01-2CA0 as its successor.
| Model | Product Description | Replacement Considerations |
|---|---|---|
| 6AG2136-6BA00-1CA0 | SIPLUS ET 200SP F-DI 8x24VDC HF | Original model; discontinued |
| 6AG2136-6BA01-2CA0 | SIPLUS ET 200SP F-DI safety input module | Listed successor; verify temperature and configuration differences |
| 6ES7136-6BA00-0CA0 | Standard ET 200SP F-DI 8x24VDC HF | Standard counterpart without the same SIPLUS environmental configuration |
| Other ET 200SP F-DI modules | Alternative fail-safe digital input modules | Check channel count, diagnostics, BaseUnit, firmware, and safety parameters |
When selecting a replacement, engineers should compare:
A successor model should not be considered a direct plug-in replacement until the complete hardware configuration and safety project have been checked.
Eight safety-related digital input channels allow the module to acquire signals from compatible protective devices and safety sensors.
The module supports safety applications up to PL e and SIL 3 when incorporated into a properly designed and validated safety system.
PROFIsafe support allows safety-related information to be transferred through a compatible industrial automation network.
Its 15 mm width helps reduce installation space requirements in modular distributed I/O stations.
The conformal coating provides additional protection for electronic assemblies under specified environmental conditions.
The specified operating range of -30 to +60 °C supports applications requiring a wider temperature range than many standard industrial modules.
The module can be incorporated into an ET 200SP station alongside compatible automation and safety components.
It is a SIPLUS ET 200SP F-DI safety digital input module designed to collect fail-safe 24 V DC signals from compatible industrial safety devices.
The module provides eight fail-safe digital inputs. These channels can be used to monitor compatible safety-related field signals.
The rated supply voltage is 24 V DC, with a permissible range of 20.4–28.8 V DC.
Yes. The module supports PROFIsafe communication for exchanging safety-related information with a compatible safety controller.
The module supports applications up to Performance Level e according to ISO 13849-1 and SIL 3 according to IEC 61508. The achieved level depends on the complete safety system design and validation.
The 6AG2136-6BA00-1CA0 is the SIPLUS version based on the standard 6ES7136-6BA00-0CA0. It includes conformal coating and enhanced environmental specifications, including an extended temperature range.
The specified compatible BaseUnit type is BU type A0. Confirm the exact BaseUnit variant and station configuration before installation.
The model has been discontinued. Siemens lists 6AG2136-6BA01-2CA0 as the successor. Existing stock and spare-part availability depend on the supplier.
It can be used to acquire compatible emergency-stop signals as part of a properly engineered safety system. The emergency-stop circuit, sensor selection, safety logic, and final stopping elements must be designed and validated together.
Verify the complete model number, physical condition, hardware revision, BaseUnit compatibility, input configuration, PROFIsafe parameters, temperature requirements, and compatibility with the existing safety program.
When purchasing the Siemens 6AG2136-6BA00-1CA0, verify the complete article number and confirm that the module matches the existing ET 200SP station. Because the model has been discontinued, buyers should check whether the unit is original stock, refurbished equipment, or a used spare part.
Request clear photographs of the product label, front panel, and connection area. Confirm the hardware condition, storage history where available, and whether the module has been functionally tested.
For replacement projects, compare the original module with the listed successor 6AG2136-6BA01-2CA0. Pay particular attention to temperature specifications, safety configuration, BaseUnit compatibility, and engineering software requirements.
During maintenance, inspect the module and BaseUnit for physical damage, contamination, loose connections, and abnormal diagnostic indications. Keep the control cabinet within the specified environmental conditions and maintain accurate records of safety configuration changes.
Any modification to a safety-related installation should be performed by qualified personnel and followed by the required safety validation. A module replacement alone does not establish that the complete machine safety function remains compliant.
The Siemens 6AG2136-6BA00-1CA0 SIPLUS ET 200SP F-DI Safety Input Module is an eight-channel fail-safe digital input device designed for 24 V DC safety signal acquisition. With PROFIsafe support, safety capability up to PL e and SIL 3, conformal coating, and an extended temperature specification, it is designed for demanding distributed safety automation applications.
Its compact 15 mm width supports space-efficient ET 200SP installations. Since the original model has been discontinued, accurate identification and careful evaluation of its successor are important when sourcing spare parts or planning system upgrades. Proper configuration, installation, and safety validation remain essential for reliable operation.