Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |

The Schneider Electric NW10HA MasterPact Switch Disconnector is a high-current switching device designed for low-voltage power distribution systems. It belongs to the MasterPact NW family and is intended for applications that require reliable connection, disconnection, and isolation of major electrical circuits.
The NW10HA has a rated operational current of 1000 A and a three-pole configuration. It is designed for AC power networks operating at 50/60 Hz, with a rated operational voltage of up to 690 V AC. Its large-frame construction makes it suitable for main distribution boards, industrial switchboards, and other high-current electrical installations.
An important characteristic of this model is its classification as a non-automatic switch disconnector. Unlike an automatic circuit breaker equipped with an overcurrent trip unit, the NW10HA does not independently provide automatic overload and short-circuit tripping protection. It is designed for switching and isolation duties and must be coordinated with suitable upstream or downstream protective devices where overcurrent protection is required.
The device is available in fixed and drawout installation arrangements, depending on the selected product configuration. Its switching and isolation functions make it relevant to industrial power distribution systems where equipment maintenance, circuit separation, and controlled power switching are important.
The NW10HA is part of the Schneider Electric MasterPact NW platform, which is used in demanding low-voltage distribution applications. When selecting this device, engineers should verify the exact mounting arrangement, pole configuration, electrical ratings, accessories, and coordination with the protection system.
| Parameter | Specification |
|---|---|
| Brand | Schneider Electric |
| Product Family | MasterPact NW |
| Model | NW10HA |
| Product Type | Switch Disconnector |
| Device Classification | Non-automatic switch |
| Rated Operational Current | 1000 A |
| Number of Poles | 3P |
| Network Type | AC |
| Network Frequency | 50/60 Hz |
| Rated Operational Voltage | Up to 690 V AC |
| Rated Insulation Voltage | 1000 V AC |
| Rated Impulse Withstand Voltage | 12 kV |
| Rated Short-Circuit Making Capacity | 143 kA at 220–690 V AC |
| Rated Short-Time Withstand Current | 65 kA for 1 second |
| Mounting Options | Fixed or drawout, depending on configuration |
| Control Type | Push-button |
| Suitability for Isolation | Yes |
| Overcurrent Trip Unit | Not included as a non-automatic switch |
| Dimensions Provided | 442 × 352 × 297 mm |
| Weight Provided | 90 kg |
| Manufacturer-Listed Net Weight | Approximately 60 kg for the listed configuration |
| Typical Application | Main low-voltage power distribution and circuit isolation |
Note: The 90 kg weight is the supplied listing value. Schneider Electric’s product page for the corresponding NW10HA switch-disconnector configuration lists approximately 60 kg net weight. Confirm the exact mounting version and whether the supplied figure includes packaging or additional accessories.
The NW10HA is designed to connect, disconnect, and isolate high-current AC circuits. It provides a controlled switching point within a power distribution system and allows electrical circuits to be separated for maintenance or operational purposes.
With a rated operational current of 1000 A, the NW10HA is designed for high-current distribution applications.
It can be installed in a main switchboard or distribution assembly to manage the connection of a major electrical feeder. Its three-pole design allows the three phases of a compatible AC circuit to be switched together.
The rated current must be considered alongside operating voltage, ambient temperature, installation conditions, and the characteristics of the connected electrical system.
Isolation is an important function in industrial electrical installations. Before maintenance work is performed on downstream equipment, the relevant circuit must be safely separated from its power source.
The NW10HA is suitable for isolation in accordance with its specified ratings and applicable installation requirements. Its contact-position indication helps operators identify the switching state.
Isolation procedures must still follow the site’s electrical safety rules. Operators should verify the absence of hazardous voltage using approved procedures before beginning maintenance.
The NW10HA has specified short-circuit making and short-time withstand ratings. These characteristics describe its ability to withstand defined electrical stresses under specified test conditions.
They do not mean that the device automatically detects and interrupts every overload or short-circuit condition. Since the NW10HA is a non-automatic switch disconnector, a suitable protective device or coordinated protection arrangement must be provided separately.
Engineers should evaluate prospective fault current, protective-device coordination, and system selectivity before installing the unit.
The MasterPact NW platform supports different mounting arrangements.
A fixed installation is mounted directly within the switchboard assembly. A drawout installation uses a compatible chassis arrangement, allowing the device to be moved between operating, test, and disconnected positions according to the design.
The selected mounting arrangement affects the required cabinet space, connection accessories, maintenance procedures, and replacement process. The exact product configuration should be confirmed before ordering.
The three-pole arrangement is intended for switching the three phases of a compatible AC distribution circuit.
In industrial power systems, three-phase switching devices are commonly used for incoming feeders, distribution sections, and large electrical loads. The system design must account for grounding, neutral arrangements, and the applicable electrical standards.
The NW10HA can serve as a major switching and isolation component within an industrial low-voltage distribution system.
In a main distribution board, the device may be used as a switching point for a high-current feeder. It allows authorized personnel to connect or isolate the associated circuit according to the operating requirements of the facility.
The main distribution system must include suitable protective equipment to address overload and short-circuit conditions.
Large industrial facilities often distribute electrical power through several switchboards and distribution panels. The NW10HA can be used in an appropriately rated section to manage a major outgoing or incoming circuit.
Its 1000 A rating makes it relevant to installations where the connected feeder requires high-current switching capacity.
Generator and transformer systems require coordinated switching and protection equipment. A switch disconnector such as the NW10HA may be incorporated into a distribution arrangement where circuit isolation and switching are required.
The device must be selected according to the system voltage, current, fault level, operating sequence, and protection design.
Maintenance teams need reliable methods for separating electrical equipment from its power source. The NW10HA can provide an isolation point within a properly designed distribution system.
The device should be operated only by qualified personnel following approved switching procedures, interlocks, and lockout/tagout requirements.
Manufacturing facilities often use high-capacity distribution systems to supply production lines, large machinery, and auxiliary equipment.
The NW10HA can be incorporated into a main or secondary distribution board to provide switching and isolation for a compatible 1000 A feeder.
Power distribution rooms contain switchboards, feeder sections, transformers, and other electrical equipment. A high-current switch disconnector can provide a controlled switching point within these installations.
Its suitability depends on the system’s rated voltage, current, fault level, and required switching duty.
Large commercial buildings and infrastructure facilities may use high-capacity low-voltage distribution systems to supply lighting, HVAC equipment, pumps, and other electrical loads.
The NW10HA may be used in a suitably engineered distribution assembly where its electrical ratings and switching functions meet the application requirements.
Generator installations require equipment for managing electrical connections and isolating circuits during maintenance or operational changes.
The NW10HA may be incorporated into a generator distribution board when the system design requires a three-pole, 1000 A switch disconnector. Generator protection must be provided by suitable coordinated protective devices.
Transformer secondary circuits can carry substantial current, particularly in industrial facilities with large electrical loads.
The NW10HA may be used as a switching and isolation component on a compatible transformer secondary feeder. Engineers must verify the available fault current and ensure that the associated protection system is correctly rated.
Data centers require carefully designed power distribution systems to support servers, cooling equipment, and backup power infrastructure.
A high-current switch disconnector may be used at an appropriate distribution point to support circuit isolation and maintenance. Critical-power applications require additional redundancy, protection coordination, and operational procedures.
Correct installation is essential for safe switching, electrical reliability, and long-term service performance.
Before installation, confirm that the system voltage, operating frequency, and load current are compatible with the NW10HA.
The device has a rated operational current of 1000 A and is designed for AC networks up to 690 V. These values must be checked against the actual system conditions.
Also verify the prospective short-circuit current and the ratings of the associated protective equipment.
Determine whether the required unit is fixed-mounted or drawout.
For drawout installations, confirm that the chassis, guide rails, connection arrangements, and mechanical interlocks are compatible with the selected switch disconnector.
Do not assume that fixed and drawout versions are interchangeable without additional equipment or modifications.
The supplied dimensions are 442 × 352 × 297 mm. These should be checked against the manufacturer’s dimensional drawings for the exact configuration.
Allow sufficient space for electrical connections, operating mechanisms, ventilation, inspection, and maintenance access.
For drawout installations, additional cabinet space may be required for the chassis and operating positions.
High-current connections require appropriate conductor sizing, mechanical support, and correct tightening procedures.
Check busbar dimensions, connection pitch, terminal compatibility, and the manufacturer’s specified tightening torque.
Poor connections can lead to excessive contact resistance, localized heating, and equipment damage.
The NW10HA is a non-automatic switch disconnector. It should not be treated as a substitute for a circuit breaker with an appropriate trip unit.
A separate protective arrangement must be selected to provide the required overload and short-circuit protection. The protection design should consider fault levels, selectivity, system grounding, and the characteristics of the connected load.
Before energizing the equipment, qualified personnel should inspect mechanical mounting, electrical connections, grounding, operating mechanisms, and interlocks.
Confirm the open and closed positions, contact-position indication, and correct integration with the switchboard.
Commissioning should follow the manufacturer’s instructions and the site’s electrical safety procedures.
The NW10HA is normally integrated into a larger low-voltage distribution assembly. The following components may be used in the same system, depending on the electrical design.
| Component | Function | Integration Considerations |
|---|---|---|
| MasterPact NW chassis | Supports drawout installation | Must match the exact frame and mounting configuration |
| Main distribution busbar | Transfers high-current electrical power | Verify current rating, dimensions, connection pitch, and temperature rise |
| Upstream circuit breaker | Provides overcurrent and short-circuit protection | Coordinate ratings and protection settings with the system |
| Overcurrent protection relay | Detects abnormal current conditions | Must operate with a suitable interrupting device |
| Current transformer | Supplies current measurement signals | Select suitable ratio, accuracy, and insulation rating |
| Voltage monitoring equipment | Monitors distribution voltage | Verify system voltage and measurement requirements |
| Switchboard control system | Coordinates electrical switching and status monitoring | Confirm auxiliary contacts and control interfaces |
| Auxiliary contacts | Provide switching-position signals | Check contact configuration and electrical ratings |
| Electrical interlocking system | Prevents unsafe switching sequences | Verify mechanical and electrical interlock compatibility |
| Grounding system | Provides an appropriate protective-earth path | Follow applicable electrical installation standards |
The listed components are examples of equipment that may be required in a complete installation. They are not necessarily supplied with the NW10HA.
The MasterPact NW family includes several frame ratings and performance levels. A replacement must be selected according to the actual application rather than the model name alone.
| Alternative Model or Family | General Consideration |
|---|---|
| MasterPact NW08HA | 800 A frame rating; lower current rating than NW10HA |
| MasterPact NW10NA | 1000 A frame rating with a different performance level |
| MasterPact NW10HA10 | Related 1000 A HA performance configuration for a different voltage application |
| MasterPact NW12HA | 1250 A frame rating; requires application-specific verification |
| MasterPact NW16HA | 1600 A frame rating for higher-current applications |
| Newer MasterPact MTZ family | May be considered for a modernization project, subject to system and installation review |
Before replacing the NW10HA, verify:
A circuit breaker with a similar current rating is not automatically a direct replacement for a non-automatic switch disconnector. The protection architecture and operating functions must be reviewed before making a substitution.
The 1000 A rating makes the NW10HA suitable for appropriately designed high-current low-voltage distribution systems.
Its three-pole arrangement supports switching of compatible three-phase AC circuits.
The device provides a defined switching and isolation point for maintenance and operational procedures.
The product belongs to the established MasterPact NW family, which is used in industrial and commercial power distribution installations.
Depending on the selected configuration, the platform supports different installation arrangements to meet switchboard design requirements.
Its specified short-time withstand rating supports applications where the device must withstand defined short-circuit stresses in coordination with separate protective equipment.
The NW10HA can be incorporated into main distribution boards, transformer feeders, generator distribution systems, and other appropriately engineered electrical assemblies.
The NW10HA is a MasterPact NW 1000 A, three-pole switch disconnector designed for low-voltage AC power distribution and circuit isolation.
No. The NW10HA is classified as a non-automatic switch disconnector. It does not provide the same automatic overload and short-circuit tripping functions as a circuit breaker equipped with an overcurrent trip unit.
Its rated operational current is 1000 A.
The model is a three-pole device designed for compatible three-phase AC distribution systems.
The published product specification gives a rated operational voltage of up to 690 V AC at 50/60 Hz.
It has specified short-circuit making and short-time withstand capabilities, but it is not an automatic overcurrent-protection device. A suitable protective arrangement must be provided separately.
The MasterPact NW platform supports both fixed and drawout arrangements. The exact mounting type should be confirmed from the complete product configuration.
The supplied listing specifies 90 kg, while Schneider Electric’s product page for the corresponding NW10HA switch-disconnector configuration lists approximately 60 kg net weight. The difference may reflect packaging, additional accessories, or a different configuration. Confirm the actual unit and weighing basis before shipping.
Not necessarily. The NW10HA is a non-automatic switch disconnector, whereas a circuit breaker may provide automatic overload and short-circuit protection. The complete protection and switching design must be evaluated before replacement.
Confirm the model, rated current, voltage, pole configuration, mounting arrangement, electrical ratings, accessories, physical condition, and compatibility with the existing switchboard. Also verify whether the supplied unit is a complete assembly or requires a separate chassis or accessories.
When sourcing the Schneider Electric NW10HA, confirm that the required product is a switch disconnector rather than an automatic circuit breaker. This distinction is essential because the two devices have different protection functions.
Check the complete product identification and verify the rated current, voltage, number of poles, mounting arrangement, and short-circuit withstand ratings. For drawout installations, confirm the chassis and accessory requirements before ordering.
For used or surplus equipment, request clear photographs of the nameplate, terminals, operating mechanism, and connection surfaces. Check for signs of overheating, corrosion, mechanical damage, or abnormal contact wear. Where the device is intended for a critical distribution system, obtain suitable inspection and functional test records.
During maintenance, follow the manufacturer’s instructions and the site’s approved electrical safety procedures. Inspect the contact system, operating mechanism, auxiliary contacts, connection points, and interlocking arrangements at the specified intervals.
Because the NW10HA is a non-automatic switch disconnector, also verify that the associated overcurrent protection remains correctly coordinated with the electrical system. Any replacement or modification should be reviewed by qualified electrical engineers.
The Schneider Electric NW10HA MasterPact is a 1000 A, three-pole switch disconnector designed for high-current AC power distribution systems. With a rated operational voltage of up to 690 V AC, it provides switching and isolation functions for industrial switchboards, transformer feeders, generator distribution systems, and other large electrical installations.
Its classification as a non-automatic switch disconnector is an important selection consideration. It should be used with a suitable coordinated protection arrangement rather than treated as an automatic circuit breaker. Correct verification of mounting configuration, electrical ratings, accessories, and system compatibility helps ensure reliable integration into industrial power distribution equipment.