Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |

The Siemens 6AG1315-2EH14-7AB0 Central Processing Unit is a SIPLUS S7-300 programmable logic controller CPU designed for industrial automation systems operating under extended environmental conditions. Based on the SIMATIC S7-300 CPU 315-2 PN/DP, this processor combines PLC program execution, industrial communication, and process coordination in a compact controller module.
As the central processing component of an S7-300 automation station, the CPU executes user programs, processes control instructions, manages data, and coordinates communication with distributed I/O devices and other automation equipment. It supports applications that require reliable sequencing, machine coordination, equipment monitoring, and communication between different levels of an industrial control system.
The 6AG1315-2EH14-7AB0 is distinguished by its conformal coating and extended operating temperature range of -25 to +70°C. These characteristics make it suitable for selected industrial installations where environmental conditions may exceed those normally encountered in standard control cabinets.
The processor provides 384 KB of integrated work memory and two communication interfaces. The first interface supports MPI/PROFIBUS DP communication at up to 12 Mbps, while the second provides Ethernet PROFINET connectivity through an integrated two-port switch. This combination allows the CPU to communicate with programming devices, operator interfaces, distributed control stations, and compatible industrial equipment.
A Siemens Micro Memory Card is required for load-memory storage. The CPU is programmed using STEP 7 V5.5 or higher, making it suitable for maintenance and engineering environments based on the corresponding SIMATIC S7-300 software platform.
For facilities maintaining existing S7-300 installations, the 6AG1315-2EH14-7AB0 provides a specific SIPLUS CPU configuration that should be identified by its complete order number. Similar-looking S7-300 CPUs may have different communication interfaces, memory capacities, environmental specifications, and firmware versions.
| Parameter | Specification |
|---|---|
| Brand | Siemens |
| Product Family | SIPLUS S7-300 |
| Model | 6AG1315-2EH14-7AB0 |
| Product Type | Central Processing Unit |
| CPU Designation | CPU 315-2 PN/DP |
| Base Model | 6ES7315-2EH14-0AB0 |
| Integrated Work Memory | 384 KB |
| Load Memory | Siemens Micro Memory Card |
| Maximum MMC Capacity | 8 MB |
| First Communication Interface | MPI / PROFIBUS DP |
| First Interface Transmission Rate | Up to 12 Mbps |
| Second Communication Interface | Ethernet PROFINET |
| PROFINET Switch | Integrated 2-port switch |
| Supply Voltage | 24 V DC |
| Permissible Supply Range | 20.4–28.8 V DC |
| Rated Current Consumption | 750 mA |
| Typical No-Load Current Consumption | 150 mA |
| Typical Inrush Current | 4 A |
| Typical Power Dissipation | 4.65 W |
| Operating Temperature | -25 to +70°C |
| Protective Design | Conformal coating |
| Programming Software | STEP 7 V5.5 or higher |
| Dimensions Provided | 40 × 125 × 130 mm |
| Weight Provided | 0.398 kg |
| Application | Industrial PLC control and automation |
The listed dimensions and weight are the supplied product data. Confirm the hardware revision and actual shipping configuration when preparing procurement or logistics documentation.
The Siemens 6AG1315-2EH14-7AB0 performs the central processing functions of an S7-300 PLC station. It receives process information, executes the configured control program, updates output commands, and exchanges data with other automation devices.
The CPU executes the user program developed in the Siemens STEP 7 engineering environment. The program contains the logic required to control machines, production sequences, process equipment, and industrial operations.
During normal operation, the CPU processes input information, evaluates logic conditions, performs calculations, and updates the corresponding control outputs. This cycle allows the automation system to respond to changing machine and process conditions.
The 384 KB integrated work memory provides storage for program execution and associated working data. The available memory must be considered when designing larger control applications with extensive logic, data blocks, and communication functions.
Industrial automation systems continuously exchange information between field devices, controllers, and operator interfaces.
The CPU manages process variables, internal data, control states, and communication information required by the user program. These data may include equipment operating conditions, production counters, alarm states, temperature measurements, and machine status information.
Organized data management helps engineers develop structured PLC applications and simplifies maintenance and troubleshooting.
The first communication interface supports MPI and PROFIBUS DP at transmission rates of up to 12 Mbps.
MPI can be used for communication with compatible Siemens programming devices and automation components. PROFIBUS DP supports communication with distributed I/O stations and other compatible field devices.
In a distributed automation architecture, the CPU can exchange process data with remote equipment rather than requiring every signal to be connected directly to the central rack.
This arrangement can simplify wiring and support modular machine configurations.
The second interface provides Ethernet PROFINET connectivity and incorporates a two-port switch.
PROFINET is widely used in industrial automation for communication between PLCs, distributed I/O stations, drives, and other compatible devices.
The integrated switch supports network connections through the CPU without requiring every connected device to have a separate direct connection to the main network infrastructure.
Network design should account for device compatibility, addressing, topology, cycle-time requirements, and the communication configuration established in the engineering project.
The 6AG1315-2EH14-7AB0 requires a Siemens Micro Memory Card for load-memory storage.
The card stores the user program and associated load data. It also provides a maintenance-free backup arrangement for program and data retention under the specified conditions.
The maximum supported MMC capacity is 8 MB. The selected card must be compatible with the CPU and the intended application.
When replacing a CPU, engineers should verify the memory-card type and project version before transferring the program or restoring the original configuration.
The CPU 315-2 PN/DP serves as the central controller in a Siemens S7-300 automation station. It coordinates field-level devices, communication networks, and operator-control systems.
The CPU executes the logic responsible for machine sequencing, equipment interlocking, timing, counting, and process coordination.
For example, in a packaging machine, the controller can coordinate product detection, conveyor operation, positioning mechanisms, and packaging sequences.
The actual control behavior depends on the user program and connected hardware.
Through PROFIBUS DP and PROFINET, the CPU can communicate with compatible distributed I/O stations.
Remote input modules provide information from sensors and switches, while output modules control actuators, relays, and other field devices.
This architecture can reduce long point-to-point wiring runs and support distributed machine layouts.
The combination of MPI/PROFIBUS DP and Ethernet PROFINET allows the CPU to participate in different communication levels of an industrial automation system.
It can exchange data with compatible field devices, engineering tools, and supervisory equipment.
Network configuration should be planned carefully to ensure that addressing, device descriptions, communication settings, and cycle-time requirements are consistent across the system.
The CPU can manage operating information and diagnostic data from the automation station. These values can be used by HMI or supervisory systems to display equipment status and help maintenance personnel identify abnormal operating conditions.
The quality of diagnostics depends on the PLC program, the connected devices, and the diagnostic configuration.
The Siemens 6AG1315-2EH14-7AB0 is designed for industrial automation applications requiring S7-300 processing capabilities and extended environmental specifications.
Manufacturing facilities use PLC controllers to coordinate machinery, production sequences, and material movement.
The CPU can manage conveyor logic, machine interlocks, production counters, and communication with distributed I/O stations.
Its PROFINET and PROFIBUS DP interfaces support integration with compatible automation equipment used across production areas.
Industrial process systems often require continuous monitoring and coordinated control of pumps, valves, motors, and instrumentation.
The CPU can execute the control logic used to manage these devices and exchange process information with distributed stations.
Typical applications include auxiliary process equipment, material handling, and machine-level process control.
Packaging equipment requires coordinated control of feeding systems, conveyors, sensors, actuators, and operating sequences.
The CPU can process sensor inputs and execute the logic required to synchronize different machine sections.
Communication with compatible remote I/O and operator interfaces helps organize the overall control architecture.
Water treatment and wastewater installations use PLC systems to coordinate pumps, valves, level switches, and process instruments.
The CPU can manage equipment sequencing, alarms, operating states, and communication with remote I/O stations.
The conformal coating and extended temperature specification may be relevant in appropriately engineered installations where environmental conditions require additional protection.
Industrial utility systems may use PLC controllers to manage auxiliary equipment, monitoring functions, and automated operating sequences.
The CPU can coordinate compatible electrical and mechanical equipment through its available communication interfaces and distributed I/O architecture.
The SIPLUS configuration is designed for extended environmental conditions compared with standard S7-300 CPU configurations.
Its specified operating temperature range of -25 to +70°C and conformal coating make it relevant to selected installations exposed to challenging temperature conditions.
The complete installation must still comply with the CPU’s environmental limits and the requirements of the connected equipment.
Correct installation and configuration are important for maintaining reliable PLC operation.
The CPU operates from a nominal 24 V DC supply, with a permissible range of 20.4–28.8 V DC.
The rated current consumption is 750 mA, while typical no-load consumption is approximately 150 mA.
Select a suitable power supply with adequate capacity for the CPU and other connected modules. Siemens recommends a minimum 2 A external protection arrangement for the power supply lines, subject to the applicable installation requirements.
The CPU must be installed in a compatible SIMATIC S7-300 mounting and backplane arrangement.
Check the rack configuration, module positions, power supply arrangement, and compatibility of the connected modules before installation.
Ensure that the mounting environment provides sufficient mechanical support and appropriate electrical grounding.
The MPI/PROFIBUS DP interface should be configured according to the connected network devices and communication requirements.
The PROFINET interface requires appropriate Ethernet cabling, network addressing, and device configuration.
For installations using distributed I/O, verify the bus topology, device addresses, and communication settings before commissioning.
A compatible Siemens Micro Memory Card is required for load-memory storage.
Before inserting or replacing the card, follow the relevant operating instructions and ensure that the program and configuration data are available.
When replacing a CPU, confirm that the memory card contains the correct project data and is suitable for the replacement hardware.
The CPU is engineered using STEP 7 V5.5 or higher.
During configuration, engineers define the hardware arrangement, communication interfaces, device addresses, program blocks, and required system parameters.
The configured hardware must match the actual rack and connected devices. Inconsistent hardware configurations may cause diagnostic errors or prevent normal startup.
After installation, verify the power supply, CPU status indicators, memory-card condition, and communication connections.
Test the PLC program, input and output signals, remote I/O communication, and PROFINET connections.
Document the final configuration and retain a backup of the engineering project for future maintenance.
The 6AG1315-2EH14-7AB0 is designed to operate within a compatible SIMATIC S7-300 automation system.
| Component | Function | Integration Considerations |
|---|---|---|
| SIMATIC S7-300 mounting rack | Supports the CPU and system modules | Confirm rack and module compatibility |
| 24 V DC power supply | Provides operating power | Verify current capacity and protection |
| Siemens Micro Memory Card | Stores load memory and user program | Required for CPU operation |
| S7-300 digital input modules | Acquire signals from sensors and switches | Confirm electrical signal type and module compatibility |
| S7-300 digital output modules | Control actuators and switching devices | Check output ratings and load requirements |
| S7-300 analog input modules | Acquire analog process measurements | Confirm signal ranges and channel configuration |
| S7-300 analog output modules | Provide analog control signals | Verify output type and connected equipment |
| PROFIBUS DP devices | Support distributed communication | Configure bus addresses and transmission settings |
| PROFINET devices | Provide Ethernet-based industrial communication | Verify network topology and device configuration |
| HMI panels | Display process information and operator controls | Configure compatible communication and tags |
| STEP 7 engineering software | Configures and programs the CPU | Version 5.5 or higher required |
The actual components required depend on the machine architecture and the installed S7-300 configuration. Compatibility should be checked against the relevant hardware and engineering documentation.
When replacing the 6AG1315-2EH14-7AB0, engineers should compare the full order number and hardware specifications rather than relying only on the CPU 315 designation.
| Alternative Model | Description | Replacement Considerations |
|---|---|---|
| 6ES7315-2EH14-0AB0 | SIMATIC S7-300 CPU 315-2 PN/DP | Base model, but does not automatically provide the same SIPLUS environmental configuration |
| 6AG1315-2AH14-7AB0 | SIPLUS S7-300 CPU 315-2 DP | Different communication configuration; verify network requirements |
| 6AG1317-2EK14-7AB0 | SIPLUS S7-300 CPU 317-2 PN/DP | Different processing and memory capabilities; assess system compatibility |
| 6ES7314-6EH04-0AB0 | SIMATIC S7-300 CPU 314C-2 PN/DP | Different CPU configuration and integrated I/O characteristics |
| 6ES7318-3EL01-0AB0 | SIMATIC S7-300 CPU 319-3 PN/DP | Higher-performance S7-300 option, requiring engineering compatibility review |
Before selecting a replacement, verify:
A standard S7-300 CPU may provide similar processing functions but may not offer the same environmental protection as the SIPLUS version.
The specified operating range of -25 to +70°C supports selected installations exposed to wider temperature variations than conventional indoor control cabinets.
The conformal coating provides additional protection for electronic assemblies against specified environmental influences. It does not eliminate the need for appropriate enclosure design and installation practices.
The combination of MPI/PROFIBUS DP and Ethernet PROFINET supports communication with different types of industrial automation equipment.
The integrated work memory provides resources for PLC program execution and associated process data management.
The two-port switch supports convenient Ethernet network connections and helps simplify certain network arrangements.
The CPU belongs to the widely deployed SIMATIC S7-300 family, making it relevant to existing industrial systems and maintenance projects.
The Micro Memory Card provides program and data retention under the specified conditions without requiring a battery for this backup function.
It is a SIPLUS S7-300 CPU 315-2 PN/DP central processing unit based on the 6ES7315-2EH14-0AB0. It provides PLC processing, MPI/PROFIBUS DP communication, and Ethernet PROFINET connectivity.
The 6AG1315-2EH14-7AB0 is the SIPLUS version with conformal coating and an extended operating temperature range of -25 to +70°C. The 6ES7315-2EH14-0AB0 is the corresponding standard SIMATIC S7-300 CPU model.
It has 384 KB of integrated work memory. The load memory uses a Siemens Micro Memory Card with a maximum supported capacity of 8 MB.
The CPU supports MPI and PROFIBUS DP through its first interface and Ethernet PROFINET through its second interface. The PROFINET interface includes an integrated two-port switch.
It requires 24 V DC. The permissible supply range is 20.4–28.8 V DC.
The CPU is engineered using Siemens STEP 7 V5.5 or higher. The engineering project must match the CPU hardware and firmware requirements.
Yes. A Siemens Micro Memory Card is required for load-memory storage. The card stores the user program and associated data.
The specified operating temperature range is -25 to +70°C. This extended range is one of the main characteristics of the SIPLUS version.
Yes. It can communicate with compatible distributed I/O equipment through PROFIBUS DP and PROFINET, subject to the system configuration and device compatibility.
Not without checking the complete system configuration. Although it is based on the standard CPU 315-2 PN/DP, engineers should verify environmental requirements, firmware, hardware revision, memory-card compatibility, network settings, and the existing STEP 7 project before replacement.
When purchasing the Siemens 6AG1315-2EH14-7AB0, verify the complete order number and confirm that the SIPLUS version is required. The environmental characteristics are important, particularly when the installation operates outside the temperature range of a standard S7-300 CPU.
For new, surplus, or refurbished units, check the product label, hardware revision, connector condition, housing, and status indicators. Confirm whether the Micro Memory Card is included, as it is required for load-memory storage but may not be supplied with every unit.
Before replacing an installed CPU, back up the STEP 7 project and document the hardware configuration, communication parameters, and program version. Confirm that the replacement CPU can operate with the existing S7-300 rack and connected modules.
For ongoing maintenance, keep the control cabinet clean, maintain suitable ventilation, and inspect power connections and communication cables periodically. Retain a verified copy of the PLC program and configuration data to support recovery after equipment replacement or unexpected failure.
The Siemens 6AG1315-2EH14-7AB0 SIPLUS S7-300 CPU 315-2 PN/DP is a central processing unit designed for industrial automation applications requiring PLC control, distributed communication, and extended environmental capability.
With 384 KB of work memory, MPI/PROFIBUS DP communication, Ethernet PROFINET connectivity, conformal coating, and an operating temperature range of -25 to +70°C, it provides a specialized controller configuration for compatible S7-300 installations.
For maintenance, procurement, and system integration, engineers should verify the complete order number, Micro Memory Card requirements, communication configuration, and environmental specifications before installation or replacement.