Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |

The Schneider Electric VW3M5D1AR80 Servo Motor Power Cable is an industrial connection accessory intended for servo motor power transmission within an automation and motion-control system. Servo power cables provide the electrical connection between a servo drive and its corresponding motor, allowing the drive to deliver controlled electrical power for motor operation.
In a servo system, the quality and suitability of the connection cable are important to overall equipment reliability. The cable must match the motor and drive connectors, electrical ratings, installation environment, and cable-routing requirements. Selecting the correct cable helps maintain a dependable connection and supports stable operation of automated machinery.
The VW3M5D1AR80 is listed with a cable length of 8 meters and a supplied weight of 0.5 kg. This length can be useful when the servo drive and motor are installed at a distance from each other within a machine or control installation. It also provides flexibility when arranging electrical cabinets, motor mounting positions, and cable routes.
The VW3M5D1A product family is associated with Schneider Electric motor connection accessories for BCH2 servo motors. However, the exact electrical construction, connector arrangement, and compatibility details for the VW3M5D1AR80 should be checked against its product label or original technical documentation before installation. Specifications published for other cable lengths in the same family should not automatically be applied to this exact catalog number.
For maintenance and procurement teams, confirming the complete reference is especially important. A servo power cable and an encoder cable may have similar appearances but perform different functions and use different connector arrangements.
| Parameter | Specification |
|---|---|
| Brand | Schneider Electric |
| Product Reference | VW3M5D1AR80 |
| Product Type | Servo Motor Power Cable |
| Product Category | Servo Drive Connection Accessory |
| Product Application | Servo motor power connection |
| Cable Length | 8 meters |
| Weight | 0.5 kg |
| Product Family Association | Schneider Electric servo connection accessories |
| Intended System | Industrial servo motor and servo drive system |
| Exact Connector Configuration | Verify against the original product documentation |
| Exact Conductor Cross-Section | Verify against the original product documentation |
| Exact Shielding Specification | Verify against the original product documentation |
| Dimensions | Not provided |
| Installation Type | Industrial machine and automation wiring |
Note: The cable length and weight are the supplied listing parameters. Connector type, conductor size, shielding construction, electrical ratings, and exact motor compatibility should be confirmed from the original VW3M5D1AR80 documentation before ordering or installation.
The primary function of a servo motor power cable is to transmit electrical power from a servo drive to a servo motor. The servo drive controls the electrical output according to motion commands and feedback information from the wider servo-control system.
A servo drive supplies the motor with controlled electrical power. The power cable provides the physical electrical path between the drive and motor.
The cable’s conductor size, insulation, connector design, and electrical ratings must be suitable for the connected servo system. Using an incorrectly rated cable can cause excessive voltage drop, overheating, connection problems, or unreliable operation.
The power cable connects the output terminals or connector of the servo drive to the motor’s power connection. Correct pin assignment and connector matching are essential.
Before installation, verify the drive-side and motor-side connection arrangements. Do not assume that cables with similar product references or appearances have identical wiring.
A servo drive regulates motor operation based on motion commands and feedback from the control system. The power cable carries the electrical power required for the motor to produce torque and movement.
The cable does not independently control position, speed, or torque. Those functions are managed by the servo drive, motor, feedback devices, and motion-control program.
A properly selected and installed cable helps maintain a stable electrical connection during normal machine operation.
Secure connector engagement, suitable strain relief, correct routing, and protection against mechanical damage are important for maintaining connection reliability over time.
Servo drive installations can generate electrical interference. Cable shielding and grounding arrangements, where specified by the manufacturer, help manage electromagnetic interference.
The exact shielding construction of the VW3M5D1AR80 should be confirmed from its own documentation. Installation personnel should follow the drive and motor manufacturer’s instructions for shield termination and grounding.
The VW3M5D1AR80 is intended to serve as a connection component within an industrial servo system. Its role is to provide the power connection required between the drive and motor.
The servo drive receives motion commands from a controller and generates the electrical output needed to operate the motor. The power cable carries this output to the motor.
Correct cable selection depends on the drive model, motor model, current requirements, connector configuration, and installation distance.
The servo motor converts electrical power into mechanical movement. Depending on the machine design, the motor may control a conveyor axis, feeding mechanism, positioning unit, or other automated movement.
A compatible power cable supports the electrical connection required for the motor to operate according to the drive’s commands.
A PLC or motion controller coordinates the machine’s operating sequence and sends motion commands to the servo drive. The controller does not normally transmit motor power through the signal interface; motor power is supplied through the dedicated power circuit.
Keeping the power and signal connections correctly identified is essential when assembling or troubleshooting a servo system.
An appropriately selected cable length helps engineers plan the physical arrangement of drives and motors. The listed 8-meter length can provide additional routing flexibility where the installation distance requires it.
The cable should not be stretched tightly or routed through areas where it may be crushed, overheated, or exposed to excessive movement beyond its specified capabilities.
Servo motor power cables are used in automation equipment where servo drives and motors must be connected reliably. The VW3M5D1AR80 should only be applied to a system after its exact compatibility has been verified.
Packaging equipment often uses servo motors for product feeding, sealing, cutting, and positioning. A suitable power cable connects the servo drive to the motor and supports the electrical power path required for these movements.
Assembly machines use servo systems to control positioning axes, transfer mechanisms, and synchronized movements. Correct cable selection helps maintain reliable electrical connections between the drive and motor.
Automated material-handling systems may use servo motors for controlled movement, lifting mechanisms, and product transfer. The cable length should be selected according to the machine layout and the permitted routing path.
Positioning equipment requires coordinated operation between the controller, servo drive, motor, and feedback system. The power cable forms part of the electrical connection between the drive and motor.
Servo motors are commonly used in automated machinery requiring controlled movement. Cable selection must account for whether the cable is installed in a fixed position or subjected to repeated movement.
Where a cable is used in a moving application, verify its permitted bending radius, flexing characteristics, and service-life specifications before installation.
Correct installation helps protect the cable and maintain reliable servo-system operation.
Before installation, check that the cable label identifies VW3M5D1AR80. Compare the reference with the servo drive and motor documentation.
Do not substitute a visually similar power cable or an encoder cable without verifying electrical and mechanical compatibility.
Confirm the connector type, pin configuration, and connection arrangement at both ends of the cable.
The connector must match the intended motor and drive interfaces. Never force a connector into a socket or modify pin assignments without approved documentation.
The supplied cable length is 8 meters. Plan the route to provide sufficient connection length while avoiding unnecessary loops, sharp bends, and mechanical interference.
Maintain the bending radius specified by the cable manufacturer. Avoid placing the cable near sharp edges, high-temperature components, or moving mechanisms that could damage its insulation.
Servo installations may contain motor power cables, encoder cables, communication cables, and general control wiring.
Follow the manufacturer’s wiring instructions for separation, shielding, and grounding. Correct routing can help reduce interference and simplify maintenance.
Use suitable cable supports and strain relief where required. Prevent the cable from being pulled directly at its connector.
For moving applications, use only a cable specifically approved for the required movement and bending conditions. A cable intended for fixed installation should not automatically be used in a drag-chain or continuous-flex application.
Before energizing the system, inspect the cable jacket, connectors, contacts, and routing. Confirm that the cable is correctly connected and that no visible damage is present.
After installation, test the servo system according to the drive and motor commissioning instructions. Check for alarms, abnormal motor behavior, and connection-related faults.
The VW3M5D1AR80 should be considered as part of a complete servo connection system. The following components describe the typical roles found in a servo installation; exact compatibility must be confirmed for the cable’s catalog number.
| Component | Function | Compatibility Considerations |
|---|---|---|
| Schneider Electric servo drive | Controls motor operation and supplies motor power | Verify the exact drive model and power connector |
| Compatible servo motor | Converts electrical power into mechanical movement | Confirm motor reference and power requirements |
| Servo power cable | Connects drive output to motor power input | Verify VW3M5D1AR80 connector and electrical specifications |
| Encoder cable | Transfers motor feedback signals | Must be selected separately; not interchangeable with a power cable |
| PLC or motion controller | Provides machine commands and motion coordination | Confirm the drive’s control interface |
| Control cabinet | Houses the drive and related electrical equipment | Provide suitable cable entry and routing |
| Cable supports and strain relief | Protect cable connections from mechanical stress | Select according to cable diameter and installation method |
| Grounding and shielding accessories | Support electrical safety and EMC performance | Follow the manufacturer’s installation instructions |
When replacing a servo motor power cable, the correct selection must be based on more than cable length. Connector type, conductor size, shielding, motor compatibility, and installation conditions all need to match.
| Related Model or Option | Description | Replacement Consideration |
|---|---|---|
| VW3M5D1AR15 | Related BCH2 motor power cable family reference | Shorter cable option; verify exact construction |
| VW3M5D1AR30 | Related BCH2 motor power cable family reference | 3-meter version; not a direct length replacement |
| VW3M5D1AR50 | Related BCH2 motor power cable family reference | 5-meter version; verify connector and electrical compatibility |
| VW3M5D1AR80 | Supplied 8-meter listing reference | Confirm exact manufacturer documentation before substitution |
| Other Schneider servo power cables | Alternative connection accessories | Match drive, motor, connector, conductor, and shielding requirements |
The related VW3M5D1AR50 documentation identifies a shielded 5-meter power cable for selected BCH2 servo motors without a brake, with a 4-pin Molex motor-side connector and a free end on the drive side. These details describe the AR50 reference and should not be assumed to apply to the AR80 without confirmation.
The listed 8-meter length provides routing flexibility for installations where the servo drive and motor are separated within a machine or equipment layout.
A purpose-selected motor power cable provides the electrical connection required between a servo drive and its motor.
The cable can form part of a servo installation used in packaging, assembly, positioning, and material-handling equipment when matched to the correct hardware.
Using the complete product reference helps maintenance personnel identify the required cable and reduce the risk of ordering an incompatible accessory.
An appropriate cable length can help engineers organize drive cabinets, motor mounting locations, and machine wiring routes without unnecessary extension connections.
Selecting the correct cable for the motor and drive helps avoid connector mismatches, electrical-rating problems, and installation errors.
It is listed as a Schneider Electric servo motor power cable. Its intended role is to provide the electrical power connection between a compatible servo drive and servo motor.
The supplied product information specifies a length of 8 meters.
The supplied listing weight is 0.5 kg.
The exact motor compatibility should be confirmed using the original VW3M5D1AR80 documentation. Do not assume compatibility based only on its similarity to other Schneider cable references.
It is listed as a servo motor power cable, but the exact compatible drive model and connector arrangement must be verified before installation.
No. A servo power cable carries electrical power to the motor, while an encoder cable transfers feedback signals. They perform different functions and should not be interchanged.
Only if the manufacturer’s documentation confirms that the cable is suitable for the required continuous or repeated movement. Verify its flexing rating and minimum bending radius.
Shielding can help manage electromagnetic interference generated by power electronics and motor switching. Its effectiveness depends on the cable design and correct shield termination and grounding.
A shorter cable may not reach the required installation points. Even when the connector and electrical specifications match, the cable length must be suitable for the machine layout and routing requirements.
Verify the complete catalog number, cable length, motor-side connector, drive-side termination, conductor specifications, shielding, compatibility, physical condition, and supplied accessories.
When purchasing the Schneider Electric VW3M5D1AR80, confirm the complete product reference and the listed 8-meter length. Request clear photographs of the cable label and both connection ends where possible.
Because similar Schneider cable references may differ in connector type, conductor size, braking configuration, and motor compatibility, do not rely solely on the product-family name. Ask the supplier to confirm the exact drive and motor references supported by the cable.
During installation, inspect the cable jacket and connector contacts. Avoid tight bends, excessive pulling force, and contact with sharp or hot surfaces. Maintain the manufacturer’s specified cable routing, shielding, and grounding practices.
For maintenance, check the cable periodically for abrasion, cuts, loosened connectors, damaged insulation, and signs of overheating. Replace a damaged cable with a verified compatible part rather than attempting an improvised repair to a critical servo power connection.
Keep the cable reference and installation information in the machine maintenance records. This helps future procurement teams identify the correct replacement and reduces the risk of using an incompatible accessory.
The Schneider Electric VW3M5D1AR80 Servo Motor Power Cable is listed as an 8-meter connection accessory for industrial servo motor applications, with a supplied weight of 0.5 kg. It provides the type of power connection required between a servo drive and motor in automated machinery.
For successful installation, the exact connector arrangement, conductor specifications, shielding, and motor compatibility must be confirmed against the original VW3M5D1AR80 documentation. Correct cable selection and routing help support reliable servo-system operation and simplify long-term maintenance.