Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |

The Schneider Electric TWDLCAA10DRF Compact Basic Controller is a programmable logic controller (PLC) from the Modicon Twido series. It is designed for compact automation systems that require reliable sequencing, digital signal processing, and control of small machines or auxiliary equipment.
The TWDLCAA10DRF combines the controller, power supply, digital inputs, and relay outputs in a single compact base. It operates from a 100–240 V AC supply and provides 10 integrated digital I/O points, consisting of six 24 V DC digital inputs and four relay outputs.
This integrated design makes the controller suitable for applications where a separate modular PLC rack would be unnecessarily large. It can receive signals from push buttons, limit switches, proximity sensors, and other field devices, process the control logic, and operate contactors, indicator devices, solenoid valves, and other compatible loads through its relay outputs.
For communication, the controller includes a non-isolated RS-485 serial connection supporting Modbus RTU and ASCII communication. This allows it to exchange data with compatible operator interfaces, serial devices, and other automation equipment.
The TWDLCAA10DRF is particularly relevant to existing Twido installations, small machine-control systems, and industrial maintenance projects. Since the model has been discontinued, users planning a replacement should check the complete catalog number and evaluate the electrical, software, and mechanical differences between the original controller and its proposed successor.
| Parameter | Specification |
|---|---|
| Brand | Schneider Electric |
| Product Series | Modicon Twido |
| Model | TWDLCAA10DRF |
| Product Type | Compact Basic Controller |
| Controller Type | Compact PLC Base |
| Total Digital I/O | 10 points |
| Digital Inputs | 6 points |
| Input Signal Type | 24 V DC |
| Input Logic | Sink or source |
| Digital Outputs | 4 relay outputs |
| Rated Supply Voltage | 100–240 V AC |
| Supply Voltage Limits | 85–264 V AC |
| Supply Frequency | 50/60 Hz |
| Frequency Limits | 47–63 Hz |
| Communication Interface | RS-485 |
| Communication Protocols | Modbus RTU, Modbus ASCII |
| Serial Connector | Mini-DIN |
| Maximum Relay Load | 2 A, subject to load type and operating conditions |
| Memory Backup | Internal lithium battery |
| Memory Backup Autonomy | Approximately 30 days |
| Battery Life | Approximately 10 years under specified conditions |
| Expansion / Accessory Slot | Memory cartridge or real-time clock cartridge |
| Dimensions Provided | 70 × 80 × 90 mm |
| Weight Provided | 0.23 kg |
| Product Lifecycle | Discontinued |
| Typical Applications | Small machine automation and compact control systems |
Specifications should be checked against the controller’s nameplate and applicable hardware documentation before installation. Relay ratings depend on load characteristics and switching conditions.
The TWDLCAA10DRF operates as the central control unit of a compact automation system. It receives input signals, executes the stored application program, and updates its output states according to the programmed control logic.
The controller provides six digital inputs designed for 24 V DC signals. These inputs can receive signals from field devices such as:
The controller processes these signals as part of its application program. Input conditions can be used to determine machine status, initiate sequences, or activate specific control operations.
The inputs support sink or source logic arrangements. The actual wiring method must be selected according to the sensor output type and the controller’s input wiring requirements.
The PLC executes the application program stored in its internal memory. The program determines how the controller responds to input conditions, timers, counters, and other logic instructions.
For example, a packaging machine may use a sensor to detect a product. The controller evaluates the sensor signal and activates a relay output when the required operating conditions are satisfied.
The program can also include interlocks and operating sequences to coordinate different machine functions.
The TWDLCAA10DRF includes four relay outputs. These outputs allow the controller to switch compatible external circuits according to the application logic.
Typical controlled devices include:
Relay outputs provide switching flexibility for different load types, but the connected load must remain within the specified electrical ratings. Appropriate external protection and interposing relays should be considered where required.
The integrated RS-485 serial interface allows the controller to exchange data with compatible devices. Modbus RTU and ASCII communication can be used for data exchange between the PLC and supported equipment.
In a typical installation, a serial HMI may display machine operating information, while the PLC continues to execute the control program.
Communication settings such as baud rate, parity, device address, and protocol mode must be configured consistently across connected devices.
The controller uses internal RAM with lithium battery backup to retain relevant data during power interruptions. The documented backup autonomy is approximately 30 days, with a specified battery life of approximately 10 years under stated conditions.
Actual retention depends on battery condition, operating environment, and maintenance history. For older equipment, checking the battery condition and maintaining a separate application backup are important maintenance practices.
The TWDLCAA10DRF provides local control for small automation installations. It can function independently for simple machines or operate as part of a larger system containing operator interfaces, sensors, motor starters, and other controllers.
The controller processes field signals and executes the logic required for machine operation. It can manage basic sequences such as starting, stopping, product detection, alarm handling, and equipment interlocking.
Its integrated I/O reduces the need for a separate I/O rack in applications with limited signal requirements.
The six 24 V DC inputs allow compatible sensors and switches to provide information about machine conditions. The four relay outputs can then operate external control devices.
For example, a sensor may detect that a workpiece has reached a defined position. The PLC processes this signal and switches an output to activate a pneumatic valve or contactor, provided the connected circuit is correctly rated.
The RS-485 interface can connect the controller to a compatible operator terminal or other serial equipment. Operators may use an HMI to view machine status, alarms, and process values.
The communication system must be configured for the supported protocol and electrical interface. A serial connection should not be mistaken for built-in Ethernet connectivity.
The TWDLCAA10DRF is useful in existing Twido installations where the original program, wiring, and field devices are still in service.
When maintaining an older machine, retaining the original controller may reduce the need for extensive electrical and software changes. However, the condition of the controller, battery, terminals, and connected equipment should be evaluated before returning it to service.
The TWDLCAA10DRF is intended for compact automation applications with a relatively small number of digital signals.
Packaging machines often require basic sequencing, product detection, and actuator control. The controller can process signals from photoelectric sensors and limit switches and operate compatible relay-controlled devices.
Typical functions include product detection, cycle initiation, machine stop conditions, and alarm handling.
Compact conveyors may use a PLC to coordinate motor starters, sensors, and machine interlocks.
The TWDLCAA10DRF can process product-detection signals and control external relays or contactors. Motor power should not be switched directly through the PLC output unless the load is within the output’s specified ratings and the installation design permits it.
Small assembly machines often require straightforward control sequences involving position switches, push buttons, and pneumatic actuators.
The PLC can coordinate these operations through its digital inputs and relay outputs, supporting repeatable machine cycles and basic fault handling.
The controller may be used in auxiliary pump installations where operating conditions are determined by digital signals such as pressure-switch contacts, level switches, or equipment status signals.
It can control external contactors and alarms according to programmed conditions. The actual pump protection and motor-control arrangements should be designed separately.
The controller can be used in selected small-scale control tasks involving ventilation equipment, auxiliary machinery, and simple equipment interlocks.
Its RS-485 interface can support communication with compatible devices, provided that protocol and network settings are correctly configured.
Many older machines continue to use Twido controllers as part of their original control architecture. The TWDLCAA10DRF may therefore be required for maintenance, repair, or restoration work.
For these applications, matching the original catalog number and hardware condition is important because a replacement controller may have different I/O capacity, terminal arrangements, and programming requirements.
Correct installation helps ensure reliable PLC operation and reduces the risk of electrical faults or unexpected machine behavior.
The TWDLCAA10DRF uses a 100–240 V AC nominal supply. Its documented allowable supply range is 85–264 V AC, with a frequency range of 47–63 Hz.
Before connecting the controller, verify the incoming supply voltage and frequency. Use appropriate upstream circuit protection and follow the manufacturer’s wiring instructions.
Do not confuse this AC controller supply with the 24 V DC input signal level. The six digital inputs require compatible 24 V DC field signals.
The supplied dimensions are 70 × 80 × 90 mm. Schneider Electric documentation presents the same three dimensions in a different order, so the actual mounting drawing should be checked before panel fabrication.
Install the controller in a suitable electrical enclosure with enough space for wiring, ventilation, and maintenance access.
Avoid placing the unit near excessive heat, moisture, corrosive substances, or strong sources of electrical interference.
Connect the six digital inputs to compatible 24 V DC field devices. The input logic supports sink or source arrangements, but the wiring must match the selected sensor type and common-terminal configuration.
Check the input voltage range and current requirements before connecting sensors. Incorrect wiring or excessive input voltage can damage the controller.
The four relay outputs can switch compatible external circuits. Confirm the voltage, current, load type, and switching frequency before connecting a device.
Inductive loads such as contactor coils and solenoid valves may require suitable suppression components. For higher-current loads, use an appropriately rated external relay or contactor.
When connecting an HMI or another Modbus device, configure the communication parameters consistently.
Important settings include:
Use suitable twisted-pair communication cable and follow the network’s termination and grounding recommendations.
Before making changes to an existing controller, obtain a verified copy of the application program whenever possible.
Check the battery condition and review the controller’s operating status. Record communication settings, I/O assignments, and machine parameters so that they can be restored after maintenance.
For replacement work, test the controller with the connected field devices and verify all machine interlocks before returning the equipment to normal operation.
The TWDLCAA10DRF is generally integrated with field devices and control equipment that match its electrical and communication specifications.
| Component | Function | Compatibility Considerations |
|---|---|---|
| 24 V DC sensors | Provide digital machine-status signals | Match input voltage, sink/source logic, and wiring |
| Push buttons | Provide manual operator commands | Use suitable contact arrangements |
| Limit switches | Detect mechanical positions | Verify contact ratings and input wiring |
| Photoelectric sensors | Detect products or objects | Confirm 24 V DC output compatibility |
| Interposing relays | Interface PLC outputs with external loads | Select coil voltage and contact ratings carefully |
| Contactors | Switch motor power circuits | Use suitable coil voltage and suppression |
| Solenoid valves | Control pneumatic or fluid circuits | Check coil current and relay contact ratings |
| HMI terminal | Provides operator interface | Must support compatible RS-485 and Modbus communication |
| RS-485 communication cable | Connects serial devices | Follow cable, polarity, shielding, and termination requirements |
| Twido memory cartridge | Supports application backup or transfer | Confirm cartridge type and software compatibility |
| Real-time clock cartridge | Adds clock-related functions | Verify the required accessory and configuration |
The components listed above are examples of equipment that may be used with the controller. They are not necessarily included with the TWDLCAA10DRF.
The TWDLCAA10DRF has been discontinued. Schneider Electric identifies the Modicon M221 family as a replacement direction for this controller.
| Alternative Model | Description | Replacement Considerations |
|---|---|---|
| Schneider Electric TM221C16R | Modicon M221 controller with 16 I/O and relay outputs | Officially recommended replacement option; requires I/O and program review |
| Schneider Electric TM221M16R | Modicon M221 controller with 16 I/O and relay outputs | Check the exact hardware configuration and mounting requirements |
| Schneider Electric TM221CE16R | M221 controller with Ethernet capability | May be considered where Ethernet communication is required; verify application needs |
| Another TWDLCAA10DRF | Original Twido controller | Best suited to like-for-like replacement when hardware and firmware match |
A replacement should not be selected based only on the number of I/O points. Engineers should compare:
Schneider Electric notes that the M221 replacement has a different I/O configuration from the original Twido controller. Application conversion may be possible using the relevant programming software, but unsupported functions and accessories must be reviewed separately.
The controller combines processing, power supply, and 10 digital I/O points in one compact base, reducing the need for a separate modular rack in small installations.
Six 24 V DC digital inputs support connection to common industrial field devices, including switches and compatible sensors.
Four relay outputs can control a range of external circuits within their specified electrical ratings.
The built-in serial interface supports Modbus RTU and ASCII communication with compatible automation equipment.
The 100–240 V AC supply allows the controller to operate in installations designed around standard industrial AC control power.
The combination of integrated I/O and serial communication makes the controller suitable for basic machine sequencing and auxiliary process control.
The original catalog number remains important for maintenance and repair of existing Twido installations where preserving the original hardware configuration is preferred.
The TWDLCAA10DRF is a compact PLC base controller from the Modicon Twido series. It combines a controller, AC power supply, six digital inputs, and four relay outputs.
It uses a nominal 100–240 V AC supply. The documented allowable voltage range is 85–264 V AC, with a frequency range of 47–63 Hz.
It has 10 integrated digital I/O points: six 24 V DC inputs and four relay outputs.
Yes. It includes an RS-485 serial interface that supports Modbus RTU and ASCII communication, subject to correct configuration.
Yes. A compatible serial HMI can communicate with the controller through its RS-485 interface. Confirm protocol support, wiring, and communication settings before integration.
Yes. The six digital inputs are designed for 24 V DC signals and support sink or source logic. The sensor wiring must match the selected input arrangement.
The controller provides four relay outputs. The connected loads must remain within the specified relay ratings, and inductive loads may require suppression components.
Yes. Schneider Electric lists the model as discontinued. It may still be available through industrial spare-parts suppliers or existing inventory.
Schneider Electric identifies the Modicon M221 TM221C16R as a recommended replacement option. The TM221CE16R may be considered when Ethernet connectivity is required. Actual selection depends on the machine’s I/O and communication requirements.
Schneider Electric provides an application-conversion path using its M221 programming environment. However, not every Twido function or accessory is supported. The application should be reviewed and tested before commissioning the replacement.
When purchasing the Schneider Electric TWDLCAA10DRF, confirm the complete catalog number and inspect the unit’s nameplate. The supply voltage, I/O arrangement, communication interface, and terminal configuration should match the existing installation.
For used or surplus controllers, request clear photographs of the front, terminals, connectors, and identification label. Confirm the condition of the enclosure, terminal blocks, and internal battery where possible. For critical machinery, ask for functional testing or a suitable test report.
Since the product is discontinued, buyers should verify stock condition, firmware or hardware revision where relevant, warranty terms, and return arrangements before ordering.
During maintenance, keep the controller clean and dry, inspect terminal connections, and monitor the condition of the internal battery. Back up the application program and document the PLC configuration to simplify troubleshooting and future replacement.
For an M221 upgrade, compare the original I/O assignments, relay loads, serial communications, and application functions with the new controller. Plan for wiring modifications, program conversion, and machine testing rather than assuming that the replacement will operate as a direct plug-in substitute.
The Schneider Electric TWDLCAA10DRF Modicon Twido Compact Basic Controller is a compact PLC designed for small industrial automation systems. It provides six 24 V DC digital inputs, four relay outputs, a 100–240 V AC power supply, and an integrated RS-485 communication interface supporting Modbus protocols.
Its integrated design makes it suitable for compact machine control, packaging equipment, auxiliary process automation, and maintenance of existing Twido installations. As the model is discontinued, accurate identification and careful replacement planning are important. The Modicon M221 family provides a potential upgrade path, but electrical, mechanical, communication, and software compatibility should all be verified before implementation.