Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |

The Schneider Electric TWDDRA16RT is a 16-point relay discrete output module designed for the Modicon Twido programmable logic controller (PLC) platform. It expands a controller’s digital output capacity, allowing the automation system to switch external electrical loads such as contactors, indicator lamps, solenoid valves, relays, and other compatible field devices.
Unlike transistor output modules, which use semiconductor switching components, the TWDDRA16RT uses electromechanical relay contacts. This allows its outputs to switch compatible AC and DC loads within the specified electrical limits. The module provides 16 normally open (NO) relay outputs divided into two common groups, giving engineers flexibility when connecting different field circuits.
Each output channel supports a maximum load current of 2 A, while each common group supports a maximum of 8 A. The module is designed for use with a removable screw terminal block, making field wiring and maintenance more convenient.
The TWDDRA16RT is particularly relevant to existing Twido installations where relay-based output switching is required. It can be used to connect PLC control logic with external devices in machinery, process equipment, and industrial automation systems.
This model has been discontinued, so replacement planning requires attention to PLC compatibility. Schneider Electric identifies the TM3DQ16R as a later replacement product, but it is not directly compatible with the original Twido and OTB platforms. Existing installations should therefore be evaluated before selecting an alternative.
| Parameter | Specification |
|---|---|
| Brand | Schneider Electric |
| Product Series | Modicon Twido |
| Model | TWDDRA16RT |
| Product Type | Discrete Output Module |
| Output Type | Electromechanical Relay |
| Number of Outputs | 16 |
| Output Contact Configuration | 16 Normally Open (NO) |
| Number of Common Groups | 2 |
| Maximum Current per Channel | 2 A |
| Maximum Current per Common Group | 8 A |
| Rated Resistive / Inductive Load | 240 V AC / 2 A; 30 V DC / 2 A |
| Connection Type | Removable Screw Terminal Block |
| Maximum Contact Resistance | 30 mΩ initial reference in hardware guide |
| Output Response Time | ON delay: 6 ms maximum; OFF delay: 10 ms maximum |
| Electrical Life | At least 100,000 operations at rated resistive load |
| Mechanical Life | At least 20 million operations without load |
| Insulation | 1500 V AC for 1 minute, according to specified isolation tests |
| Internal Current Consumption | 45 mA at 5 V DC and 75 mA at 24 V DC with all outputs on |
| Protection Rating | IP20 |
| Operating Temperature | 0 to 55°C |
| Dimensions Provided | 125 × 100 × 70 mm |
| Weight Provided | 0.085 kg |
| Manufacturer Reference Weight | Approximately 0.145 kg |
| Product Lifecycle | Discontinued |
The dimensions and 0.085 kg weight are the supplied listing values. Schneider’s hardware documentation lists approximately 0.145 kg for the module. Confirm the actual unit’s dimensions and weight before publication or shipping.
The TWDDRA16RT receives output commands from a compatible Twido PLC and uses internal relay contacts to switch connected field loads. Each output corresponds to a digital control point in the PLC program.
When the PLC activates an output, the corresponding relay inside the module changes contact state. The normally open contact closes, allowing current to flow through the connected load circuit.
When the PLC deactivates the output, the relay returns to its normal state and the contact opens.
This switching arrangement allows the PLC to control external equipment without directly carrying the load current through its internal logic circuitry.
The module provides 16 relay output channels. These channels can be assigned to different devices or functions within a machine.
For example, one output may control a solenoid valve, another may activate an alarm, and additional channels may operate contactors or auxiliary relays.
The PLC program determines when each output is activated according to sensor signals, operating sequences, timers, and interlock conditions.
The 16 outputs are divided into two common groups. This arrangement provides separate common connections for different output circuits.
Each common group supports a maximum current of 8 A, while an individual channel supports up to 2 A. Engineers must consider both limits when designing the field wiring.
The total current of simultaneously energized outputs within a group must not exceed the common-group rating.
Relay contacts can switch compatible AC and DC loads within their specified voltage and current ratings. This makes the TWDDRA16RT suitable for applications involving different types of field devices.
The maximum rated load is 240 V AC at 2 A or 30 V DC at 2 A per output. Actual load suitability also depends on the electrical characteristics of the device, including inrush current, inductive behavior, and switching frequency.
The relay output arrangement provides electrical separation between the output contact circuits and the module’s internal logic circuitry, subject to the specified insulation ratings.
This is useful when the PLC’s control electronics need to operate field circuits at different electrical potentials. Correct grounding, wiring, and protective measures are still necessary.
The TWDDRA16RT serves as the output interface between a Twido PLC and external electrical equipment. It converts PLC program decisions into physical switching actions.
A PLC’s built-in output points may not be sufficient for every machine-control requirement. The TWDDRA16RT adds 16 relay output points, allowing the controller to manage additional devices.
This is useful when a machine requires multiple independent commands for valves, alarms, contactors, and auxiliary equipment.
The module can switch compatible field loads according to the PLC’s control sequence. Typical examples include:
The module provides switching functions rather than directly controlling every aspect of the connected equipment. Motor protection, safety interlocking, and other application requirements must be addressed separately.
In automated machinery, output signals often need to operate in a specific order. A PLC program can activate different TWDDRA16RT channels according to sensor feedback, timing conditions, and machine-state logic.
For example, a packaging machine may activate a feed valve, operate a positioning mechanism, and then trigger a reject actuator as part of a programmed sequence.
The module provides the physical output switching required to carry out these commands.
Packaging equipment uses multiple electrical devices to coordinate product movement, sealing, positioning, and rejection.
The TWDDRA16RT can switch compatible relays, solenoid valves, indicator lamps, and auxiliary contactors according to PLC commands. Its 16 output points allow several control functions to be managed through one expansion module.
Conveyor installations often require separate control signals for motor contactors, diverter mechanisms, alarms, and auxiliary equipment.
The relay outputs can be used to operate compatible control circuits, allowing the PLC to coordinate material movement and equipment status.
Industrial process systems use valves, pumps, alarms, and auxiliary devices to manage operating conditions.
The TWDDRA16RT can provide discrete switching signals for compatible field equipment. It is especially relevant to existing Twido-based control panels that require additional relay outputs.
Water treatment installations may use electrically operated valves, dosing equipment, warning indicators, and auxiliary control relays.
The module can support PLC-based switching functions for these devices, provided that the electrical ratings and environmental conditions are suitable.
Assembly machines and production systems often contain multiple discrete electrical loads that must be activated according to a programmed sequence.
The TWDDRA16RT can expand the number of available PLC output points and support coordination between the controller and external equipment.
Correct installation is essential for dependable switching, electrical safety, and long-term module performance.
Before installation, confirm that the controller and expansion arrangement support the TWDDRA16RT. This module belongs to the Modicon Twido product family and should not be assumed compatible with unrelated Schneider PLC platforms.
Check the controller model, expansion configuration, hardware documentation, and available output capacity.
The module has 16 normally open relay outputs divided into two common groups. Each channel supports up to 2 A, and each common group supports up to 8 A.
Distribute field loads across the two groups according to their current requirements. Do not exceed either the individual channel limit or the common-group limit.
Use appropriately rated conductors and protective devices for the connected loads.
The TWDDRA16RT uses a removable screw terminal block. This arrangement allows field wiring to be prepared separately and can simplify module replacement.
Before removing or installing the terminal block, isolate the relevant power sources and follow the required electrical safety procedures. Confirm terminal assignments and polarity where applicable using the manufacturer’s wiring documentation.
Solenoid valves, contactor coils, and other inductive loads can produce voltage transients when switched off.
Use suitable suppression components where required by the load and system design. Select protection according to the load type and the manufacturer’s recommendations.
The documented operating temperature range is 0 to 55°C. The module is designed for an IP20 environment and should be installed in a suitable control enclosure.
Keep the cabinet free from excessive dust, moisture, and conductive contamination. Maintain the environmental conditions required by the Twido hardware documentation.
After wiring, test each output point using the PLC program or an approved commissioning procedure.
Verify that the intended field device responds correctly, that the common-group current limits are respected, and that no unexpected switching occurs.
Document the I/O assignments and wiring changes for future maintenance.
The TWDDRA16RT is designed for use in a compatible Modicon Twido control system. The following components illustrate the typical equipment associated with an installation.
| Component | Function | Integration Considerations |
|---|---|---|
| Modicon Twido PLC | Executes machine-control logic | Confirm controller and expansion compatibility |
| TWDDRA16RT module | Provides 16 relay output points | Verify output ratings and common-group limits |
| Removable screw terminal block | Connects field wiring | Check terminal condition and wiring assignments |
| 24 V DC control supply | Supplies compatible control circuits | Verify system power requirements |
| Intermediate relays | Switch or isolate external control circuits | Select according to coil and contact ratings |
| Solenoid valves | Control pneumatic or hydraulic flow | Check voltage, current, and inductive suppression |
| Contactors | Switch motor or auxiliary power circuits | Use appropriate motor protection and contactor ratings |
| Indicator lamps | Display machine status | Verify voltage and current requirements |
| Circuit protection | Protects wiring and connected equipment | Select according to load and applicable electrical codes |
The components listed are examples of equipment used in a complete control system. They are not necessarily included with the TWDDRA16RT.
The TWDDRA16RT is discontinued. Schneider Electric identifies the TM3DQ16R as a later replacement product, but this does not mean it can be installed directly in an existing Twido system.
| Model | Description | Replacement Considerations |
|---|---|---|
| TWDDRA16RT | Twido 16-point relay output module | Original model for compatible Twido systems |
| TM2DRA16RT | 16-point relay output module | Related earlier replacement option; verify controller compatibility |
| TM3DQ16R | Modicon TM3 16-point relay output module | Later product, but not directly compatible with original Twido or OTB systems |
| TWDDRA8RT | Twido 8-point relay output module | Fewer output points; not a direct equivalent |
Before choosing an alternative, evaluate:
For an existing Twido installation, the safest approach is to identify a compatible replacement based on the original controller and hardware configuration. A newer module may require a controller upgrade, wiring modifications, and PLC program changes.
The module provides 16 normally open relay outputs, allowing one unit to control multiple field devices.
Relay contacts can switch compatible AC and DC loads within the specified voltage and current ratings.
The two common groups provide flexibility when arranging field circuits and distributing output loads.
The removable terminal arrangement can simplify wiring preparation, maintenance, and module replacement.
The relay output design provides specified isolation between output circuits and internal logic, helping separate control electronics from field switching circuits.
The module is designed for the Modicon Twido platform and is useful for maintaining existing installations that require additional relay output points.
The TWDDRA16RT is a Schneider Electric Modicon Twido discrete output module with 16 electromechanical relay outputs. It is used to switch compatible external electrical loads according to PLC commands.
It provides 16 normally open relay output channels, divided into two common groups.
Each output channel supports a maximum load current of 2 A, subject to the specified voltage and load conditions.
Each common group supports a maximum current of 8 A. The total current of all active outputs connected to that group must remain within this limit.
Yes. Its specified rated loads include 240 V AC at 2 A and 30 V DC at 2 A. The actual load must also be evaluated for inrush current and inductive characteristics.
It uses a removable screw terminal block, allowing field wiring to be prepared and connected through the module’s terminal interface.
It is designed for the Modicon Twido PLC family. Compatibility with a specific controller and expansion configuration should be verified before installation.
No. Schneider Electric lists the model as discontinued on December 31, 2016, with end of service on December 31, 2021.
Schneider Electric lists the TM3DQ16R as a later replacement. However, the manufacturer states that it will not work directly with the original Twido or OTB systems. A controller and system compatibility review is therefore necessary.
The supplied listing weight is 0.085 kg, while Schneider’s hardware documentation lists approximately 0.145 kg for the module. The difference should be checked against the physical unit and the weighing method before publishing the final product data.
When sourcing the TWDDRA16RT, verify the complete model number and confirm that the module is intended for the existing Twido PLC installation.
For discontinued equipment, ask suppliers to confirm whether the unit is new old stock, refurbished, or used. Request clear photographs of the product label, terminal block, and housing. For critical applications, request appropriate functional testing before installation.
During maintenance, inspect relay terminals for looseness, discoloration, overheating, or signs of contact deterioration. Relay contacts have finite electrical and mechanical lifetimes, and switching inductive loads can affect service life.
Review the connected load current and common-group loading when adding or modifying field devices. Ensure that protective components and suppression arrangements are appropriate for the application.
For replacement planning, retain the existing PLC model, I/O assignment list, wiring diagrams, and module configuration information. If migrating to a newer Schneider platform, evaluate the controller, expansion modules, terminal wiring, and PLC program as a complete system rather than replacing the output module in isolation.
The Schneider Electric TWDDRA16RT Modicon Twido Discrete Output Module provides 16 normally open relay outputs for industrial PLC applications. With a maximum current rating of 2 A per channel and 8 A per common group, it can switch compatible AC and DC field loads in machinery, packaging equipment, process systems, and manufacturing installations.
Its removable screw terminal block and relay-based switching design make it useful for maintaining existing Twido control systems. Since the model has been discontinued, accurate identification and compatibility checks are essential when purchasing spare units or planning a system upgrade.