Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |

The Schneider Electric TWDDDO32TK Discrete Output Module is a 32-point transistor output module designed for use with Schneider Electric’s Twido programmable logic controller (PLC) platform. It provides digital output signals for controlling external devices such as indicator lamps, small relays, solenoid valves, and other compatible automation components.
As part of the Twido discrete I/O family, the TWDDDO32TK expands a PLC system’s output capacity. It allows the controller to execute programmed logic and send switching commands to multiple field devices. This makes it useful in machine automation, packaging equipment, material handling, and general industrial control applications.
The module provides 32 transistor outputs with a 24 V DC rated load voltage. Its source-type output configuration, also known as PNP output logic, supplies positive voltage to a connected load when an output is activated. The outputs are arranged in two common groups, allowing the module to control multiple devices within the specified electrical limits.
The TWDDDO32TK uses an HE10 connector for field wiring through a compatible pre-wired interface or connection assembly. Its compact dimensions of 81.3 × 90 × 33.5 mm and supplied weight of 0.105 kg make it suitable for installations where control-panel space is limited.
This module is a discrete output device rather than a standalone controller. It depends on a compatible Twido PLC or supported system configuration to process the control program and determine when individual outputs should switch.
The TWDDDO32TK has been discontinued by Schneider Electric. The recommended replacement is the Modicon TM3DQ32TK, a 32-point transistor PNP output module. However, replacement suitability should be evaluated against the existing controller, wiring arrangement, connector requirements, and application design.
| Parameter | Specification |
|---|---|
| Brand | Schneider Electric |
| Product Series | Twido |
| Model | TWDDDO32TK |
| Product Type | Discrete Output Module |
| Output Type | Transistor |
| Output Logic | Source / PNP |
| Number of Outputs | 32 |
| Rated Output Voltage | 24 V DC |
| Operating Load Voltage Range | 20.4–28.8 V DC |
| Rated Current per Channel | 0.1 A |
| Number of Common Groups | 2 |
| Electrical Connection | HE10 connector |
| Mounting | Compatible Twido I/O mounting arrangement |
| PLC Compatibility | Twido system |
| Dimensions | 81.3 × 90 × 33.5 mm |
| Weight | 0.105 kg |
| Product Status | Discontinued |
| Recommended Replacement | TM3DQ32TK |
Technical values should be checked against the module’s exact revision and the applicable Twido hardware documentation before installation.
The TWDDDO32TK receives output commands from the PLC system and converts them into electrical switching signals for connected field devices. Each output point corresponds to an individual control signal in the PLC program.
A discrete output has two principal operating states: ON and OFF.
When the PLC program activates an output point, the module switches the corresponding transistor output to supply the specified positive DC voltage to the connected load. When the output is deactivated, the switching path is turned off.
This arrangement allows the PLC to control multiple devices independently, provided that wiring, load current, and common-group limits remain within the module’s specifications.
The TWDDDO32TK uses source-type transistor outputs. In a PNP arrangement, the output supplies positive voltage to the load when activated.
A typical connection places the load between the module output and the appropriate DC common reference. The external device must be compatible with the module’s voltage, current, and switching characteristics.
Correct polarity is essential. Incorrect wiring can prevent the output from operating properly or damage connected equipment.
The module provides 32 output channels, allowing one PLC expansion module to control multiple field devices.
For example, a machine may use different output points for status indicators, control relays, valve actuators, and other low-current loads. The PLC program determines the switching sequence based on sensor signals, operator commands, and process conditions.
The number of available channels does not mean that all loads can operate without limitation. Current per channel and the total current permitted for each common group must be considered.
The 32 outputs are organized into two common groups. This arrangement is relevant when planning wiring and distributing loads.
Engineers should identify the common-terminal arrangement in the module documentation and ensure that the external supply, load wiring, and protective devices are configured correctly.
The module does not make independent process decisions. Its output states are determined by the PLC program and the operating conditions of the automation system.
For example, when a sensor detects that a product has reached a certain position, the PLC can activate a corresponding output to operate an indicator, relay, or compatible actuator. The output module carries out the electrical switching command.
The TWDDDO32TK serves as the output interface between a Twido PLC and external field devices. It allows the PLC to translate control logic into physical switching operations.
A machine may require more output points than are available on its base controller. Adding a compatible expansion module increases the number of devices that can be controlled.
With 32 transistor output points, the TWDDDO32TK can support a range of low-current digital control signals in a suitable Twido installation.
The module can switch compatible DC loads such as indicator lamps, small relays, and other devices that meet its electrical specifications.
Loads with higher current requirements should not be connected directly unless their requirements are within the module’s ratings. Interposing relays or suitable driver interfaces may be necessary.
In an automated machine, the PLC may execute a sequence involving several actuators. The output module provides the electrical signals needed to coordinate these devices.
For example, a packaging machine may activate a product stopper, operate an indicator, and energize a small control relay at different stages of its operating cycle.
The output states can be monitored through the PLC program and associated system diagnostics. This helps maintenance personnel investigate whether a device has received an activation command.
However, an activated PLC output does not necessarily confirm that the connected field device has physically operated. Feedback sensors or auxiliary contacts may be required to verify actual device status.
The TWDDDO32TK is suitable for applications that require multiple 24 V DC digital output signals and are compatible with its transistor output characteristics.
Packaging machines use digital outputs to control indicators, small relays, and compatible actuators. The 32-point arrangement can support multiple switching functions within a machine sequence.
For example, the PLC may activate an output when a product reaches a filling or sealing position, coordinating the relevant equipment with other machine operations.
Conveyor equipment often uses digital outputs for status indicators, control relays, and auxiliary devices. The TWDDDO32TK can provide switching signals for compatible low-current loads.
In a multi-section conveyor, different output points can be assigned to separate operating zones or machine functions.
Automated material-handling systems may require numerous digital control signals for small actuators, indicators, and interface relays.
The module can be incorporated into a suitable PLC installation to support the switching requirements of these systems.
Assembly equipment frequently uses sensors and actuators to coordinate repetitive production operations. The PLC processes input signals and activates the appropriate outputs according to the programmed sequence.
The TWDDDO32TK can provide the required output points for compatible 24 V DC control devices.
The module may also be used in compact production machines, auxiliary equipment, and industrial control panels where multiple transistor outputs are required.
Its suitability depends on the connected load characteristics, output current, wiring design, and PLC compatibility.
Correct installation helps maintain reliable switching performance and protects the module and connected equipment.
Before installation, verify that the existing controller and expansion configuration support the TWDDDO32TK.
Check the PLC hardware documentation, expansion limits, firmware requirements, and module arrangement. Do not assume that a module is compatible with every Schneider Electric PLC simply because it uses a similar connector or has the same number of I/O points.
The module is designed for a nominal 24 V DC load supply, with an operating range of 20.4–28.8 V DC.
Check the external power supply and confirm that its voltage remains within the permitted range under normal operating conditions. The power supply must also have sufficient capacity for the connected loads.
The TWDDDO32TK uses an HE10 connector. Select a compatible cable or pre-wired connection assembly and verify the pin assignment before connecting field devices.
Pay particular attention to:
Incorrect pin assignments or polarity can cause unexpected operation or equipment damage.
Each output channel has a specified current rating of 0.1 A. Confirm the steady-state and switching characteristics of every connected load.
For loads with higher current demand, use an appropriately rated interposing relay or external driver. Inductive loads may require suitable suppression components to limit switching transients.
Do not exceed the permitted current for an individual channel or common group.
The module measures 81.3 × 90 × 33.5 mm and weighs 0.105 kg. Confirm the mounting arrangement and available clearance in the existing Twido installation.
Provide sufficient space for the connector, wiring, access, and maintenance. Keep the module within the environmental limits specified for the system.
After wiring, inspect the connections and confirm the supply polarity. Test individual output points using a controlled commissioning procedure.
Verify that each activated output operates the intended field device and that deactivated outputs return to the expected state. Check for unexpected switching, wiring errors, and excessive load current before returning the machine to normal operation.
The TWDDDO32TK is designed for use as part of a compatible Twido PLC installation. Its operation depends on the controller, power supply, connection hardware, and external loads.
| Component | Function | Integration Considerations |
|---|---|---|
| Schneider Twido PLC | Executes the control program | Confirm hardware and expansion compatibility |
| 24 V DC power supply | Supplies the external load circuit | Verify voltage stability and current capacity |
| HE10 connection cable | Connects the output module to field wiring | Confirm connector type and pin assignment |
| Interposing relay | Switches loads beyond the direct output rating | Select suitable coil voltage and contact ratings |
| Indicator lamps | Provide machine status indication | Confirm 24 V DC compatibility and current demand |
| Solenoid valves | Control pneumatic or hydraulic functions | Verify coil current and suppression requirements |
| Terminal blocks | Organize field wiring | Maintain clear channel and common-group identification |
| Circuit protection | Protects wiring and external circuits | Select protection according to load and wiring requirements |
| PLC input module | Receives feedback from field devices | Use feedback signals where actual actuator operation must be confirmed |
The components listed are examples of equipment used in a complete control system. They are not necessarily supplied with the TWDDDO32TK.
Schneider Electric has discontinued the TWDDDO32TK and identifies the TM3DQ32TK as its recommended replacement.
The TM3DQ32TK belongs to the Modicon TM3 I/O family and provides 32 transistor PNP outputs through an HE10 connection. Although the output count and general function are similar, it should not be treated as a direct plug-in replacement without checking the host PLC and system architecture.
| Model | Product Description | Replacement Considerations |
|---|---|---|
| TWDDDO32TK | Twido 32-point transistor source output module | Original module for existing Twido installations |
| TM3DQ32TK | Modicon TM3 32-point transistor PNP output module | Schneider-recommended replacement; verify controller compatibility and wiring |
| TWDDDO16TK | Twido 16-point transistor source output module | Fewer output points; not a like-for-like replacement |
| TWDDDO32UK | Twido 32-point transistor sink output module | Different output logic; wiring and load compatibility must be checked |
| TWDDDO16UK | Twido 16-point transistor sink output module | Different channel count and output logic |
Before replacing the original module, check:
The TM3DQ32TK may be suitable for an upgrade, but the replacement process may require changes to the controller, expansion arrangement, wiring, and PLC configuration.
The module provides 32 digital output points, allowing a compatible PLC system to control multiple field devices from a single expansion module.
Its transistor switching design is suitable for compatible 24 V DC control loads and digital switching applications.
The source-type configuration supplies positive voltage to the connected load when an output is activated, supporting common PNP control arrangements.
The dimensions of 81.3 × 90 × 33.5 mm allow the module to fit into compact Twido control installations.
The HE10 interface supports organized multi-channel wiring through a compatible connection assembly.
The module works with the Twido controller to execute output commands based on machine logic, sensor conditions, and operator instructions.
The TWDDDO32TK is relevant to existing Twido installations where maintaining the original control architecture is important.
It is a Twido 32-point discrete output module with transistor switching. It is designed to provide digital output signals for compatible external devices in a PLC-controlled automation system.
The module provides 32 transistor output channels arranged in two common groups.
Its rated load voltage is 24 V DC, with an operating load voltage range of 20.4–28.8 V DC.
It is a source-type transistor output module, commonly described as PNP logic. When activated, the output supplies positive voltage to the connected load.
The specified current rating is 0.1 A per channel. The total current permitted for each common group must also be considered.
The module uses an HE10 connector. A compatible connection cable or interface assembly should be selected after checking the pin assignment.
It may control a compatible 24 V DC solenoid valve if the coil’s current and switching characteristics are within the module’s limits. Higher-current loads require a suitable external relay or driver.
No. Schneider Electric has discontinued this model. Availability may remain through industrial spare-parts suppliers, surplus stock, and refurbished equipment channels.
Schneider Electric identifies the Modicon TM3DQ32TK as the recommended replacement. Before upgrading, verify compatibility with the existing PLC, wiring, and control-system architecture.
No. The TWDDDO32TK is designed for the Twido system. Controller compatibility and supported expansion arrangements must be confirmed before installation.
When sourcing the TWDDDO32TK, verify the complete model number and confirm that the module is the source-type 32-point version. Similar Twido output modules may have different output logic, channel counts, and electrical characteristics.
For used or surplus units, request clear photographs of the product label, connector, and housing. Inspect the connector for damaged pins and check the module for signs of overheating, contamination, or physical damage. Where possible, request functional testing of all output channels.
During maintenance, inspect field wiring, external power supplies, common connections, and connected loads. If an output does not operate as expected, check the PLC program, output status, supply voltage, connector wiring, and load condition before replacing the module.
For upgrade projects, evaluate the TM3DQ32TK and the corresponding Modicon controller architecture. A replacement module should be selected based on the entire system rather than output count alone. Confirm wiring, configuration, and commissioning requirements before removing the original Twido hardware.
The Schneider Electric TWDDDO32TK Twido Discrete Output Module provides 32 transistor source-type outputs for 24 V DC industrial control applications. With a compact design, HE10 connection, and two common groups, it can support multiple switching functions in compatible Twido PLC systems.
The module is discontinued, and Schneider Electric recommends the TM3DQ32TK as its replacement. For maintenance and upgrade projects, verifying output logic, current limits, connector wiring, and PLC compatibility is essential to achieving reliable system operation.