• Schneider TSXTLYEX Line Terminator
  • Schneider TSXTLYEX Line Terminator
  • Schneider TSXTLYEX Line Terminator
  • Schneider TSXTLYEX Line Terminator
Product Overview The Schneider Electric TSXTLYEX Line Terminator is a rack-end connection accessory designed for Schneider Electric’s Modicon Premium automation platform. It is used with compatibl……
Schneider TSXTLYEX Line Terminator
  • Schneider
  • TSXTLYEX
  • Line Terminator
  • France
  • 60 × 25 × 15 mm
  • 0.05 kg
  • Xiamen, China
  • New & In Stock
  • T/T, PayPal, Western Union
  • 1 Year
  • 1-3 Working Days
  • DHL, UPS, TNT, FedEx and EMS.
  • 24-Hour Service
  • COO
  • 11

Our advantage

Schneider TSXTLYEX Line Terminator

Global Logistics

We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.

Schneider TSXTLYEX Line Terminator

Brand new and original

Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.

Schneider TSXTLYEX Line Terminator

24-hour service

We provide 7*24 hours service to our customers. We will be there whenever you need us.

Schneider TSXTLYEX Line Terminator

Price advantage

All our products are priced very favorably because we have our own warehouse and supply.


Company Information
E-mail [email protected]
Mobile +8615980777398
Whatsapp +8615980777398
WeChat 15980777398

Product Overview

The Schneider Electric TSXTLYEX Line Terminator is a rack-end connection accessory designed for Schneider Electric’s Modicon Premium automation platform. It is used with compatible TSXRKY..EX rack configurations and provides the designated termination connections required at the end of the rack arrangement.

In industrial automation systems, rack termination is an important part of maintaining correct electrical characteristics across a communication or extension connection. Depending on the architecture, an incorrectly terminated line may contribute to signal reflections, communication instability, or unreliable system operation. The TSXTLYEX provides the specified rack-end termination hardware for compatible installations.

The TSXTLYEX is supplied as a set of two terminators. The kit composition consists of one 9-pin SUB-D connector labelled A and one 9-pin SUB-D connector labelled B. These clearly identified connectors allow maintenance personnel to distinguish the two termination components during installation and replacement.

Unlike an active PLC module, the TSXTLYEX does not perform logic processing, signal acquisition, or output control. Its role is to provide a connection and termination function within the supported rack arrangement. It is therefore a supporting accessory that contributes to the correct physical and electrical configuration of the automation system.

With a net weight of 0.05 kg, the TSXTLYEX is a compact component suitable for industrial control cabinet installations. Its small size makes it convenient to store as a maintenance spare, particularly in facilities operating legacy Modicon Premium equipment.

When selecting this product, engineers should verify the rack model and the required A/B termination arrangement. A visually similar connector or generic terminator should not be assumed to provide the same electrical characteristics or compatibility.

Technical Specifications

Parameter Specification
Brand Schneider Electric
Model TSXTLYEX
Product Type Line Terminator
Product Range Modicon Premium Automation Platform
Accessory Category Connection Accessories
Installation Position Rack End
Product Compatibility TSXRKY..EX.
Quantity per Set 2
Connector Type 9-pin SUB-D
Connector Identification A and B
Kit Composition One SUB-D 9 connector labelled A and one SUB-D 9 connector labelled B
Net Weight 0.05 kg
Dimensions Provided 60 × 25 × 15 mm
Typical Application Rack-end connection termination
Product Function Passive connection and termination accessory

Note: The supplied dimensions are retained as listing information. They differ from the manufacturer’s dimensional drawing and should be checked against the actual item before publication or mechanical planning.

Function and Working Principle

The TSXTLYEX is a passive termination accessory. Its function is related to the electrical termination of the designated rack-end connection rather than active data processing.

1. Rack-End Termination

Industrial automation racks may use defined electrical connections between rack components or extension arrangements. At the end of a supported configuration, the appropriate termination components must be installed according to the system design.

The TSXTLYEX is designed for the rack-end position of compatible TSXRKY..EX configurations. It provides the designated termination connection for this arrangement.

2. A/B Connector Identification

The kit contains two 9-pin SUB-D connectors, identified as A and B. These markings are important because the two connectors are not simply interchangeable based on their physical appearance.

During installation, technicians should follow the rack documentation and use the correct connector at the specified position. Correct identification helps reduce wiring mistakes and simplifies maintenance.

3. Electrical Signal Termination

A termination component provides an appropriate electrical termination condition for a designated connection. In systems that require line termination, the correct termination helps control signal behavior and reduce reflections that may affect communication reliability.

The electrical characteristics and installation position must match the intended system. The TSXTLYEX should therefore be used only in the compatible rack arrangement specified by Schneider Electric.

4. Passive Operation

The TSXTLYEX does not require a separate control program and does not execute PLC logic. It does not provide independent input or output channels.

Its role is determined by its physical installation and electrical connection. Once correctly installed, it forms part of the rack’s connection arrangement.

Role in Industrial Control Systems

The TSXTLYEX supports the physical connection architecture of compatible Modicon Premium automation installations. Although it is not a processing module, correct termination can be important to the overall reliability of the rack arrangement.

Modicon Premium Rack Configuration

The TSXTLYEX is designed for use with TSXRKY..EX rack configurations. Its purpose is associated with the rack-end connection rather than general-purpose wiring or unrelated communication ports.

Before installation, technicians should confirm the exact rack reference and the manufacturer’s required termination arrangement.

Communication and Extension Connections

Rack-based automation systems rely on correctly configured electrical connections between supported components. Termination accessories help establish the required electrical conditions at designated connection points.

The TSXTLYEX should not be treated as a universal Ethernet terminator or as a general-purpose RS-485 termination resistor. Its compatibility is specific to the intended Schneider Electric rack arrangement.

Maintenance and System Availability

In an operating plant, a missing, damaged, or incorrectly installed termination component may complicate troubleshooting. Keeping the correct TSXTLYEX kit available can help maintenance personnel restore the original rack configuration when a component requires replacement.

Accurate identification is particularly important in older automation installations where equipment may have been modified over time.

Industrial Applications

The TSXTLYEX is used in industrial control systems that employ compatible Schneider Electric Modicon Premium rack configurations.

1. Manufacturing Automation

Manufacturing lines often use rack-based PLC systems to coordinate conveyors, motors, sensors, actuators, and machine interlocks. The TSXTLYEX may be required as part of the specified rack-end arrangement in compatible installations.

2. Process Automation

Industrial process facilities use PLC and PAC systems to monitor equipment and coordinate process operations. Where a compatible Modicon Premium rack is installed, the correct termination accessory helps maintain the intended rack connection configuration.

3. Material Handling Systems

Material-handling equipment may use PLC-controlled conveyors, transfer mechanisms, and sorting systems. In installations based on compatible TSXRKY..EX racks, the TSXTLYEX can serve as the designated rack-end termination accessory.

4. Industrial Equipment Maintenance

Maintenance departments supporting legacy Modicon Premium systems may keep TSXTLYEX kits as spare parts. Having the correct termination component available can reduce delays when restoring a rack after inspection, replacement, or troubleshooting.

5. Legacy Control System Support

Many industrial facilities continue to operate established automation platforms because the existing equipment remains integrated with production machinery. The TSXTLYEX can be relevant to maintenance and spare-parts procurement for systems that still use compatible Modicon Premium racks.

Installation and System Integration

The TSXTLYEX is a compact accessory, but its installation should follow the rack’s technical documentation. Incorrect placement or connector identification may affect the intended electrical configuration.

1. Verify Rack Compatibility

Before installation, confirm that the rack belongs to the TSXRKY..EX compatible family. The TSXTLYEX is not a universal terminator for every Modicon rack or communication interface.

Check the rack reference and the applicable system documentation before ordering or fitting the accessory.

2. Identify the A and B Connectors

The kit contains two SUB-D 9 connectors, one labelled A and the other labelled B. Inspect the labels before installation.

Do not interchange the connectors simply because their housings appear similar. Follow the manufacturer’s specified connection arrangement.

3. Inspect the Connector Condition

Before installation, check the connector contacts, housing, fastening hardware, and identification markings. Bent contacts, corrosion, contamination, or mechanical damage may affect connection reliability.

If a connector is damaged, replace it with the correct component rather than attempting an improvised repair.

4. Follow Electrical Safety Procedures

Before working on an automation rack, follow the site’s isolation and lockout procedures. Confirm the equipment’s safe maintenance condition and follow the relevant PLC system instructions.

Do not connect or disconnect rack components while the system is energized unless the equipment documentation explicitly permits the operation.

5. Secure the Connection

Install the termination components at the specified rack-end position and secure the connectors according to the manufacturer’s instructions.

Avoid excessive force when connecting or fastening the SUB-D connectors. Check that the connector is correctly aligned and that the fastening arrangement is secure.

6. Verify System Operation

After installation, inspect the rack configuration and confirm that the termination components are installed in the correct positions.

Restore the system according to the approved commissioning procedure. Check for rack-related diagnostics, communication abnormalities, or other unexpected conditions before returning the equipment to normal operation.

Compatible System Components

The TSXTLYEX is a connection accessory intended for a specific rack configuration. Compatibility should be verified against the complete hardware reference.

Component Function Compatibility Consideration
TSXTLYEX Rack-end line termination Set of two connectors labelled A and B
TSXRKY..EX rack Compatible rack arrangement Manufacturer-listed product compatibility
Modicon Premium PLC/PAC system Industrial automation control platform Confirm the exact rack and system configuration
SUB-D 9 connection interface Physical connector interface Use the correct A/B connector in the specified position
Rack extension arrangement Provides the designated rack configuration Follow the applicable system installation documentation
Control cabinet Houses PLC racks and related equipment Provide suitable protection and maintenance access

The table describes the intended system context. It does not mean that the TSXTLYEX kit includes a rack, PLC, or additional communication hardware.

Alternative Models and Replacement Considerations

The TSXTLYEX has a specific rack-end application. Replacement selection should prioritize the correct electrical function and hardware compatibility rather than physical appearance alone.

Replacement Approach Consideration
Schneider Electric TSXTLYEX Preferred like-for-like replacement for the specified compatible rack arrangement
Original A/B termination components Confirm that both connector markings and the required arrangement match
Other Modicon rack accessories Not automatically interchangeable; verify the exact rack reference
Generic SUB-D 9 connector A matching connector shape does not establish electrical compatibility
Generic communication terminator Do not substitute unless the system documentation confirms the electrical characteristics and application

Before purchasing a replacement, check:

  • The complete TSXTLYEX product reference.
  • The TSXRKY..EX rack model.
  • The number of termination components required.
  • The A and B connector identification.
  • The physical condition of the connectors.
  • The correct rack-end installation position.
  • The manufacturer’s instructions for the specific system.

Using an unverified substitute may result in an incorrect electrical termination arrangement. For legacy control systems, the original catalog number is generally the safest starting point for spare-parts identification.

Key Advantages

Designed for a Specific Rack Application

The TSXTLYEX is intended for the rack-end connection arrangement of compatible TSXRKY..EX racks, making it suitable for the specified Modicon Premium configuration.

Two-Piece Kit

The product is supplied as a set of two termination components, with one connector labelled A and the other labelled B.

Clear Connector Identification

The A/B markings help technicians distinguish the two components during installation and maintenance.

Compact Construction

With a published net weight of 0.05 kg, the kit is lightweight and convenient to store as an industrial spare part.

Supports Correct Rack Configuration

The accessory provides the designated termination components required by the compatible rack arrangement.

Useful for Legacy System Maintenance

The TSXTLYEX can help maintenance teams support existing Modicon Premium installations without replacing the entire control system solely because a termination accessory is missing or damaged.

Technical FAQs

1. What is the Schneider Electric TSXTLYEX?

The TSXTLYEX is a line terminator accessory for the Modicon Premium automation platform. It is designed for rack-end installation in compatible TSXRKY..EX configurations.

2. How many pieces are included in one TSXTLYEX set?

One set contains two termination components: one 9-pin SUB-D connector labelled A and one 9-pin SUB-D connector labelled B.

3. Which racks are compatible with the TSXTLYEX?

The manufacturer’s product information lists compatibility with TSXRKY..EX rack configurations. Confirm the complete rack reference before ordering.

4. What is the purpose of a rack-end line terminator?

A line terminator provides the electrical termination required at a designated connection point. Correct termination helps maintain the intended electrical conditions of the supported rack arrangement.

5. Is the TSXTLYEX an active PLC module?

No. It is a passive connection accessory. It does not execute control logic, process input signals, or provide output channels.

6. Does the TSXTLYEX use a SUB-D connector?

Yes. The kit contains two 9-pin SUB-D connectors, identified as A and B.

7. Can the TSXTLYEX be used as a general-purpose communication terminator?

It should not be treated as a universal communication terminator. Its documented compatibility is specific to the TSXRKY..EX rack-end application.

8. What is the net weight of the TSXTLYEX?

The manufacturer’s published net weight is 0.05 kg.

9. What should be checked before replacing an existing TSXTLYEX?

Verify the rack model, connector labels, required installation position, and condition of the existing termination components. Confirm that the replacement matches the original system documentation.

10. Why is the A/B connector identification important?

The two connectors have separate labels to identify their intended positions in the rack arrangement. Correct identification helps prevent installation errors and supports accurate maintenance.

Procurement and Maintenance Recommendations

When purchasing the Schneider Electric TSXTLYEX, verify the complete catalog number and confirm that the intended application uses a compatible TSXRKY..EX rack. The fact that another connector uses a similar SUB-D 9 interface does not establish that it can replace this product.

For industrial spare-parts inventory, keep the two-piece kit together and protect the connectors from dust, moisture, impact, and contact damage. Retain the A/B identification so that the components can be installed in their intended positions.

Before accepting a replacement unit, inspect the connector housings, contacts, labels, and fastening features. For used or surplus parts, request clear product photographs and confirm that both components are included.

The supplied dimensions of 60 × 25 × 15 mm should be checked against the actual product and manufacturer’s dimensional drawing before using them for mechanical design or shipping calculations. The published net weight is 0.05 kg.

During maintenance, follow the rack manufacturer’s instructions and the site’s electrical safety procedures. After replacement, verify the rack configuration and check system diagnostics before returning the equipment to production.

Conclusion

The Schneider Electric TSXTLYEX Modicon Premium Line Terminator is a two-piece rack-end connection accessory designed for compatible TSXRKY..EX rack configurations. The kit contains two 9-pin SUB-D connectors labelled A and B and has a published net weight of 0.05 kg.

Although it is a small passive component rather than an active PLC module, the TSXTLYEX has a defined role in the rack’s electrical connection arrangement. Correct product identification, connector positioning, and compatibility verification are important when maintaining legacy Modicon Premium automation systems.



Related Products

Get the latest price? We will reply as soon as possible (within 12 hours)

No:77501