Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |

The Schneider Electric TSXSUP1051 Power Supply Module is an industrial power supply designed for Schneider Electric TSX automation systems. It provides a regulated 24 V DC output for compatible control equipment and process-related loads, helping maintain a stable power source for PLC installations and industrial automation applications.
In an industrial control system, a reliable power supply is essential for maintaining the operation of controllers, sensors, interface devices, and other connected equipment. Voltage instability or insufficient power capacity can cause unexpected shutdowns, communication interruptions, or abnormal system behavior. The TSXSUP1051 is designed to provide a dedicated 24 V DC supply for applications requiring a nominal output current of 5 A.
The module supports AC input supplies in the 100–120 V and 200–240 V ranges. Its nominal output is 24 V DC, with a rated current of 5 A and an output power capacity of approximately 120 W. These characteristics make it suitable for compatible TSX control installations where a stable 24 V DC source is required.
The TSXSUP1051 belongs to the Schneider Electric TSX automation product family. It is important to distinguish this model from Ethernet communication modules: despite the product description sometimes appearing incorrectly in third-party listings, TSXSUP1051 is a power supply module, not an Ethernet TCP/IP interface.
When purchasing or replacing this module, engineers should verify the complete model number, input voltage range, output capacity, terminal arrangement, and compatibility with the existing TSX installation.
| Parameter | Specification |
|---|---|
| Brand | Schneider Electric |
| Product Model | TSXSUP1051 |
| Product Type | Power Supply Module |
| Product Family | TSX Automation |
| Output Voltage | 24 V DC |
| Rated Output Current | 5 A |
| Rated Output Power | Approximately 120 W |
| Nominal Input Voltage | 100–120 V AC / 200–240 V AC |
| Input Voltage Range | 85–132 V AC / 170–264 V AC |
| Input Frequency | 47–63 Hz |
| Output Regulation | Regulated 24 V DC |
| Cooling Method | Natural convection |
| Protection | Short-circuit and overload protection |
| Typical Application | Industrial PLC and process-control power supply |
| Dimensions Provided | 60 × 180 × 260 mm |
| Weight Provided | 0.34 kg |
The supplied dimensions and weight are retained as listing information. Published product information gives an approximate weight of 0.88 kg, so confirm the actual module and measurement basis before publishing logistics specifications.
The TSXSUP1051 converts incoming AC electrical power into a regulated 24 V DC output. This output can supply compatible industrial control circuits and equipment within the module’s rated capacity.
The module receives AC power from the industrial electrical supply and converts it into DC power suitable for control equipment.
The conversion process includes rectification and regulation to provide a stable output. This allows connected devices to operate from a consistent DC supply rather than directly from the AC input.
The module provides a nominal 24 V DC output with a rated current of 5 A.
A stable DC supply is important for PLC-related equipment, control relays, interface circuits, and other compatible devices. The total connected load must remain within the available output capacity.
At the nominal rating, the approximate output power is:
24 V × 5 A = 120 W
This value provides a reference for evaluating the connected load. Engineers should also consider startup current, transient loads, and the power requirements of individual devices.
Industrial power supplies may encounter abnormal conditions caused by wiring faults, damaged devices, or excessive connected loads.
The TSXSUP1051 documentation describes protection against short circuits and overloads. These functions help protect the power supply and connected circuits under specified fault conditions.
Protection does not eliminate the need for correct external fusing, suitable cable sizing, and proper installation practices.
The TSX SUP 1051 documentation includes connection arrangements for parallel operation. Where this function is used, the power supplies must be connected according to the manufacturer’s requirements.
Parallel operation should not be treated as automatically providing redundancy. Engineers must verify current-sharing behavior, protection arrangements, wiring, and the intended operating configuration.
The TSXSUP1051 provides the DC power required by compatible control-system components. Its role is important because PLC processors and field devices depend on stable electrical power to execute control functions reliably.
Industrial PLC installations contain processors, I/O modules, communication devices, and other components that require suitable power sources.
The TSXSUP1051 can supply compatible 24 V DC loads within its rated capacity. The exact equipment powered by the module depends on the TSX system architecture and the installation’s electrical design.
Many industrial sensors, switches, and control interfaces use 24 V DC. A suitable power supply can provide the required voltage for these devices.
When connecting field equipment, engineers should calculate the total current demand and ensure that the power supply is not overloaded.
Control relays and interface circuits may also require 24 V DC. The TSXSUP1051 can support compatible loads when the combined demand remains within its electrical rating.
The power supply should be installed with appropriate circuit protection and wiring practices to reduce the risk of voltage drops and electrical faults.
In process-control installations, stable power helps maintain the operation of control circuits and associated equipment. A correctly selected power supply can contribute to reliable system operation and reduce interruptions caused by inadequate DC power.
The TSXSUP1051 can be used in compatible industrial automation installations requiring a 24 V DC supply.
PLC cabinets contain processors, I/O modules, terminal blocks, relays, and other electrical components. A suitable 24 V DC supply supports the control circuits and connected devices.
The TSXSUP1051 can be considered for installations designed around its electrical specifications and supported TSX system configuration.
Production machinery commonly uses 24 V DC control circuits for sensors, switches, relays, and interface equipment.
A regulated supply helps maintain consistent operating voltage for these components, supporting stable machine-control functions.
Conveyors, transfer equipment, and automated handling systems use sensors and control devices to coordinate product movement.
The TSXSUP1051 may supply compatible control circuits in these systems, provided that the combined load remains within its rated output capacity.
Industrial process installations often contain control interfaces and monitoring devices that require 24 V DC.
A dedicated power supply can provide the electrical power required by these devices and help separate control power from other electrical loads.
Older automation systems may require replacement power supply modules to maintain existing equipment.
The TSXSUP1051 can be relevant to maintenance projects involving compatible TSX installations. Before replacement, confirm the original module number, input supply, output rating, and terminal connections.
Correct installation is essential for electrical safety and stable power delivery.
Before connecting the module, confirm that the available AC supply matches its specified input range.
The TSXSUP1051 supports nominal 100–120 V AC and 200–240 V AC input configurations. The manufacturer’s technical information specifies corresponding operating voltage limits.
Check the actual supply voltage and wiring arrangement before energizing the unit.
The module must be connected to protective earth according to the manufacturer’s instructions and applicable electrical regulations.
Use an appropriately sized grounding conductor and ensure that the connection is secure. Proper grounding is essential for personnel safety and electrical-noise management.
Connect the positive and negative output terminals according to the terminal markings and installation documentation.
Check polarity carefully before connecting field devices. Incorrect polarity can damage connected equipment.
The rated output current is 5 A. Calculate the total current demand of all devices supplied by the module.
Consider the following:
Avoid operating the module continuously beyond its rated capacity.
The TSXSUP1051 uses natural convection for cooling. Install it in a location with sufficient airflow and avoid obstructing ventilation paths.
Do not place heat-generating components too close to the power supply unless the cabinet design provides adequate thermal management.
After installation, inspect the wiring, terminal connections, protective grounding, and external fuses.
Energize the module and verify that the output voltage is within the expected range. Check the connected equipment under normal operating conditions and monitor for abnormal heating or unexpected shutdowns.
The TSXSUP1051 is intended for use in compatible Schneider Electric TSX automation installations. The following components represent typical equipment that may be associated with a PLC power system.
| Component | Function | Integration Considerations |
|---|---|---|
| Schneider Electric TSX PLC | Executes automation logic | Confirm the system architecture and power requirements |
| 24 V DC sensors | Detect process and machine conditions | Check total current demand and polarity |
| Control relays | Switch control and auxiliary circuits | Verify coil voltage and current |
| I/O interface equipment | Connects field signals to the PLC | Confirm voltage and electrical compatibility |
| Terminal blocks | Distribute DC power and signals | Use correctly rated terminals and conductors |
| Circuit protection devices | Protect power and field circuits | Select according to load and manufacturer guidance |
| Industrial control cabinet | Houses automation equipment | Provide sufficient ventilation and mounting space |
| Protective grounding system | Provides electrical safety | Follow applicable grounding regulations |
The table describes typical system components, not items included with the TSXSUP1051.
When replacing a TSXSUP1051, the replacement must match the electrical and installation requirements of the original system.
| Alternative or Related Model | Consideration |
|---|---|
| Schneider Electric TSXSUP1011 | Related TSX power supply model; verify its output rating and system suitability |
| Schneider Electric TSXSUP1021 | Related TSX supply with a different output-current rating |
| Schneider Electric TSXSUP1101 | Higher-capacity TSX power supply model; verify electrical and installation compatibility |
| Compatible 24 V DC industrial power supply | May be considered for a retrofit, subject to detailed electrical and mechanical review |
A replacement should be evaluated according to:
A power supply with the same nominal output voltage is not automatically a direct replacement. Its output capacity, installation method, protection characteristics, and system compatibility must also be considered.
The module provides a nominal 24 V DC output for compatible industrial control equipment.
Its rated 5 A output supports control-system loads within the module’s specified capacity.
The module converts AC input power into DC power suitable for industrial automation circuits.
Documented short-circuit and overload protection helps manage specified abnormal operating conditions.
The product documentation describes parallel connection arrangements for supported installations. The wiring and operating requirements must be followed carefully.
The module is designed for compatible Schneider Electric TSX installations, making it relevant to maintenance and replacement work involving legacy automation equipment.
Natural convection supports operation without relying on a dedicated internal cooling fan, provided that installation clearances and environmental requirements are respected.
The TSXSUP1051 is a Schneider Electric TSX power supply module designed to provide regulated 24 V DC power for compatible industrial automation equipment.
No. The TSXSUP1051 is a power supply module, not an Ethernet communication module. Its primary function is AC-to-DC power conversion.
The module provides a nominal output voltage of 24 V DC.
The rated output current is 5 A, corresponding to approximately 120 W at 24 V DC.
It supports nominal 100–120 V AC and 200–240 V AC input supplies. Verify the actual supply configuration before installation.
The product documentation describes protection against short circuits and overloads. External protective devices and correct wiring are still required.
The product documentation includes parallel connection arrangements. Follow the manufacturer’s connection requirements and verify the intended current-sharing and protection configuration.
The module uses natural convection. Maintain adequate airflow and avoid obstructing the cooling path.
Verify the complete model number, input voltage, output voltage, current rating, terminal arrangement, physical dimensions, and compatibility with the existing TSX system.
Not automatically. A replacement must provide suitable output capacity, input compatibility, protection, mounting, and wiring arrangements. The impact on the existing PLC installation should be assessed before substitution.
The TSXSUP1051 is a legacy Schneider Electric automation power supply, so accurate model identification is important when sourcing replacement equipment.
Before purchasing, verify the model number printed on the product label and confirm that the module provides the required 24 V DC, 5 A output. Check the input voltage configuration and inspect the terminal arrangement against the existing installation.
For used or refurbished units, request clear photographs of the product label, terminals, housing, and any visible signs of damage. Confirm the product’s test condition, warranty terms, and whether accessories are included.
During maintenance, inspect the wiring, grounding, terminals, and cabinet ventilation. Check the DC output voltage and investigate repeated overload or short-circuit conditions rather than repeatedly resetting the equipment without identifying the cause.
For retrofit projects, calculate the total DC load and confirm that the replacement power supply can support all connected devices, including startup demand and future expansion.
The Schneider Electric TSXSUP1051 is a 24 V DC, 5 A power supply module designed for compatible TSX automation installations. With an approximate output capacity of 120 W, it provides power for industrial control circuits and associated automation equipment.
Its AC input flexibility, regulated DC output, documented overload and short-circuit protection, and parallel connection arrangements make it a relevant component in legacy TSX system maintenance. Correct model identification and electrical compatibility checks are essential when sourcing or replacing this module.