Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |

The Ingersoll Rand 47556925001 22239362 Motor Shaft Sleeve is an industrial compressor spare part identified as a motor shaft bushing for the Ingersoll Rand M250 compressor. It is designed to fit the motor shaft assembly and serves as a mechanical sleeve within the rotating equipment arrangement.
Motor shaft sleeves are important components in industrial machinery because they provide a defined contact surface around a shaft. Depending on the equipment design, a sleeve can help protect the underlying shaft surface, support the intended fit between connected components, and simplify maintenance when a worn contact surface needs replacement.
In an air compressor, the motor and air-end assembly must operate in a coordinated manner. The motor supplies rotational power, while the shaft and associated mechanical components transmit that power to the compressor mechanism. A correctly specified shaft sleeve helps maintain the mechanical interface intended by the equipment manufacturer.
The part number 22239362 is identified in available parts listings as a motor bushing for the M250 compressor. The supplied product listing also includes reference number 47556925001. Since industrial spare-part catalogs may contain multiple numbering systems, buyers should confirm the relationship between these numbers against the compressor’s parts list and equipment serial number.
For maintenance teams, using the correct shaft sleeve is important for preserving mechanical fit and avoiding unnecessary wear on connected components. Before ordering, verify the original part number, shaft dimensions, equipment model, and physical condition of the existing assembly.
| Parameter | Specification |
|---|---|
| Brand | Ingersoll Rand |
| Manufacturer | Ingersoll Rand |
| Part Number | 47556925001 |
| Additional Part Number | 22239362 |
| Product Name | Motor Shaft Sleeve |
| Component Type | Motor Shaft Bushing / Sleeve |
| Equipment Application | Ingersoll Rand M250 air compressor |
| Outer Diameter | Ø107.95 mm |
| Weight | 1.25 kg |
| Product Category | Compressor Mechanical Spare Part |
| Main Function | Shaft interface and surface protection, according to assembly design |
Note: The outer diameter and weight are the supplied listing specifications. Confirm all critical dimensions, including inner diameter, length, tolerances, and material, against the original part or the applicable equipment documentation before installation.
The motor shaft sleeve is a mechanical component installed around a designated section of the motor shaft or associated shaft assembly. Its exact role depends on the compressor’s mechanical design and the position of the sleeve within the assembly.
A sleeve can provide a replaceable contact surface around a shaft. In mechanical assemblies where components contact or move relative to one another, the sleeve may help prevent direct wear on the underlying shaft surface.
If the sleeve becomes worn, replacing it may be preferable to repairing or replacing a larger shaft assembly. The actual replacement procedure depends on the manufacturer’s design and maintenance instructions.
The sleeve contributes to the dimensional interface between the shaft and connected components. Correct dimensions are important for maintaining the intended fit and mechanical positioning.
An incorrectly sized sleeve can create excessive clearance, interference, vibration, or uneven contact. For this reason, the outer diameter alone is not sufficient to confirm compatibility. Inner diameter, length, tolerance, and installation method should also be checked.
Compressor motors operate under continuous or repeated mechanical loads. Components surrounding the shaft must maintain their intended position and fit during operation.
A properly matched sleeve helps preserve the designed mechanical arrangement. It should not be treated as a substitute for bearings, seals, or other components unless the equipment documentation specifically assigns those functions to it.
Shaft sleeves may require inspection during motor or compressor overhaul. Wear, scoring, corrosion, deformation, or damage to the contact surface can indicate that replacement is necessary.
The decision should be based on inspection and the manufacturer’s acceptance criteria rather than appearance alone.
The 22239362 motor shaft sleeve is associated with the mechanical arrangement of the Ingersoll Rand M250 compressor. Its role should be understood as part of the complete motor and compressor assembly rather than as an independent operating device.
The electric motor provides the rotational energy required to operate the compressor. The shaft assembly transfers this motion to the connected mechanical components.
The sleeve forms part of the shaft-related hardware. Correct fit is important because dimensional errors can affect the relationship between connected components.
Industrial screw compressors contain precision mechanical components that must operate within defined clearances and alignment limits. The motor-side mechanical arrangement must be maintained to support stable operation.
During overhaul, technicians should inspect the sleeve together with the shaft, bearings, seals, coupling components, and other related parts identified in the equipment documentation.
Keeping the correct shaft sleeve available can reduce delays during scheduled maintenance. This is particularly relevant for industrial compressors that support continuous production, where an extended equipment shutdown may affect plant operations.
A reliable spare-parts record should include the part number, compressor model, serial number, dimensions, and previous replacement history.
The identified 22239362 part is associated with the Ingersoll Rand M250 compressor. It is relevant to maintenance work involving the corresponding motor shaft assembly.
Technicians should confirm the compressor model and the exact assembly configuration before fitting the replacement component.
Manufacturing plants use compressed air for pneumatic tools, automated machinery, material handling, and production equipment.
Maintaining compressor mechanical components helps support the availability of the compressed-air system. Shaft-related parts should be inspected during planned maintenance to identify wear before it develops into a larger mechanical problem.
Compressed-air systems are commonly used as plant utilities. Their reliability depends on the condition of the compressor, motor, cooling system, filtration equipment, and other supporting components.
Correct spare-part identification helps maintenance teams prepare for scheduled compressor servicing and reduce unnecessary delays.
During an overhaul, technicians may inspect the motor shaft and associated sleeve for signs of wear or damage. If the sleeve no longer meets the required dimensional or surface condition, replacement may be necessary.
The replacement should follow the original assembly procedure and applicable manufacturer tolerances.
Installation of a motor shaft sleeve involves mechanical work and should be performed by qualified compressor or motor maintenance personnel.
Before installation, compare the replacement sleeve with the original part. Check both supplied identifiers, 47556925001 and 22239362, against the equipment parts list.
Also confirm the compressor model and serial number. A similar-looking sleeve from another compressor model may have different dimensions or material characteristics.
Before fitting the replacement, inspect the shaft and surrounding components for scoring, corrosion, deformation, and abnormal wear.
If the underlying shaft is damaged, installing a new sleeve without addressing the original problem may lead to premature failure.
The supplied outer diameter is Ø107.95 mm. This measurement should be checked against the original component and the manufacturer’s dimensional requirements.
Other important measurements include:
Do not rely on the outer diameter alone when approving a replacement.
The sleeve should be installed using the procedure specified for the relevant compressor assembly. Avoid uncontrolled force, impact, or improvised heating and cooling methods.
Incorrect installation can damage the sleeve or shaft and may affect the mechanical fit.
Where applicable, inspect bearings, seals, coupling elements, and adjacent shaft surfaces during the same maintenance operation.
Replacing a worn sleeve without checking related components may leave the original source of wear unresolved.
After installation, verify the assembly’s fit, alignment, and freedom of movement according to the equipment procedure. Reassemble the compressor and motor system using the specified fastening and alignment requirements.
Before returning the compressor to service, complete the required inspection and operational checks.
The shaft sleeve is a mechanical spare part rather than an electrical control module. Its compatibility is primarily determined by the motor and compressor mechanical assembly.
| Component | Function | Inspection Considerations |
|---|---|---|
| Electric motor | Provides rotational power | Confirm motor model and shaft configuration |
| Motor shaft | Transfers rotational motion | Inspect dimensions, surface condition, and runout |
| Shaft sleeve | Provides a designated sleeve or bushing interface | Verify inner diameter, outer diameter, length, and fit |
| Bearings | Support rotating components | Check clearance, noise, lubrication, and wear |
| Shaft seals | Help control leakage around rotating shafts | Inspect sealing surfaces and leakage condition |
| Coupling components | Connect rotating mechanical assemblies where applicable | Check alignment, wear, and fit |
| Compressor air end | Performs the compression process | Confirm the correct mechanical configuration |
| Fasteners and retaining components | Secure the assembly | Replace or inspect according to maintenance instructions |
The components listed above are examples of related equipment that may be found in a compressor motor assembly. They are not necessarily supplied with the shaft sleeve.
Selecting an alternative shaft sleeve requires more than matching its outside diameter. The part must be compatible with the shaft, mechanical assembly, and compressor model.
| Replacement Option | Consideration |
|---|---|
| Ingersoll Rand 22239362 | Primary part-number reference supplied for the M250 motor shaft bushing |
| Ingersoll Rand 47556925001 | Additional reference supplied in the product listing; verify its relationship to 22239362 |
| Other Ingersoll Rand motor shaft sleeves | Must be checked against the exact compressor model and shaft dimensions |
| OEM-equivalent replacement sleeve | Requires dimensional, material, and fit verification |
| Custom-machined sleeve | Should only be considered with approved engineering drawings and tolerances |
Before selecting a replacement, confirm:
A sleeve intended for another Ingersoll Rand compressor may have a similar appearance but still be unsuitable for the M250 assembly.
The shaft sleeve forms part of the motor shaft assembly and contributes to the intended mechanical interface between connected components.
Where the assembly design uses the sleeve as a replaceable contact surface, it may allow maintenance personnel to renew the sleeve without replacing a larger shaft component.
The 22239362 number provides a useful identification reference for M250 compressor maintenance and spare-part sourcing.
Keeping the correct replacement sleeve available can help maintenance teams prepare for scheduled compressor overhaul work.
Correct part selection and installation help preserve the intended mechanical fit of the compressor motor assembly.
It is identified as a motor shaft bushing or sleeve for the Ingersoll Rand M250 air compressor. It is a mechanical spare part associated with the motor shaft assembly.
Both numbers are supplied in the product listing. Available parts information identifies 22239362 as an M250 motor bushing. Confirm the cross-reference between the two numbers against the equipment parts list before ordering.
The supplied outer diameter is Ø107.95 mm. Other dimensions, including inner diameter and overall length, should be verified before installation.
Part number 22239362 is listed for the Ingersoll Rand M250 air compressor. Confirm the exact equipment model and serial number before purchasing.
The supplied product listing gives a weight of 1.25 kg. Confirm the actual unit weight and packaging weight separately when arranging transportation.
A motor shaft sleeve is fitted around a designated shaft section. Depending on the assembly design, it can provide a replaceable contact surface and help maintain the intended dimensional interface between connected components.
Replacement may be necessary when inspection identifies wear, scoring, corrosion, deformation, or dimensional changes beyond the permitted limits. Follow the applicable maintenance documentation.
Not automatically. Inner diameter, length, material, tolerances, surface finish, and installation method must also match the original requirements.
Yes. Inspect the shaft and related components for damage or abnormal wear. A new sleeve may not solve the problem if the underlying shaft or another component is defective.
Provide the part numbers, compressor model, equipment serial number, required quantity, and available dimensional information. Photographs of the original component and its identification markings can also help reduce ordering errors.
When sourcing the Ingersoll Rand 47556925001 / 22239362 Motor Shaft Sleeve, begin by checking the original equipment documentation. Confirm that the part is intended for the M250 compressor and that both supplied identifiers correspond to the required mechanical component.
For critical maintenance projects, request confirmation of the dimensional drawing and material specification. The supplied outer diameter of Ø107.95 mm is useful for identification, but it does not establish complete dimensional compatibility.
Before ordering, also confirm whether the part is genuine Ingersoll Rand equipment or an aftermarket replacement. If an aftermarket part is being considered, request dimensional and material information rather than relying only on a general compatibility statement.
During maintenance, inspect the shaft surface and related bearings, seals, and coupling components. Record the condition of the original sleeve and the reason for replacement. This information can help identify recurring alignment, lubrication, or wear problems.
Keep spare parts stored in a clean, dry environment and protect precision contact surfaces from impact and contamination. Confirm the actual unit weight and packaging dimensions before arranging shipment.
The Ingersoll Rand 47556925001 22239362 Motor Shaft Sleeve is an M250 compressor-related mechanical spare part identified as a motor shaft bushing. With a supplied outer diameter of Ø107.95 mm and a listed weight of 1.25 kg, it is intended for maintenance involving the corresponding motor shaft assembly.
Accurate part-number verification, dimensional inspection, and correct installation are essential when replacing this component. By confirming the compressor model, checking the shaft assembly, and following the applicable maintenance procedure, maintenance teams can select the appropriate replacement and support reliable compressor operation.