ProductPRODUCT
Featured products
Contact Us
- Bently Nevada
- 40113-03
- 3300 5 mm Connector Protector Kit
- USA
- 350 × 40 × 200 mm
- 0.45 kg
- Xiamen, China
- New & In Stock
- T/T, PayPal, Western Union
- 1 Year
- 1-3 Working Days
- DHL, UPS, TNT, FedEx and EMS.
- 24-Hour Service
- COO
- 9
Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |
Product Overview
The Bently Nevada 40113-03 is a Connector Protector Kit intended for use with Bently Nevada 3300 5 mm proximity probes and their associated extension cables. It is an installation accessory for protecting the coaxial connection points within a proximity measurement system.
In a typical 3300 5 mm installation, the proximity probe is mounted near a rotating shaft, while an extension cable connects the probe to the Proximitor Sensor. The connection between the probe lead and extension cable is exposed to the surrounding installation environment. Without suitable connector protection, these interfaces may be affected by moisture, contamination, handling, and other environmental conditions.
The 40113-03 kit includes connector protectors and installation tools. Its purpose is to provide an additional protective arrangement around the probe-to-extension-cable connection. The connector protectors fit over the corresponding connector interfaces, helping protect the electrical connection from environmental exposure.
For example, on a centrifugal compressor, proximity probes may be installed near journal bearings to monitor shaft vibration. The probe leads are connected to extension cables routed toward the machinery monitoring equipment. The 40113-03 can be used during installation to protect these connection points, particularly where the connections are located in areas exposed to oil mist, moisture, or routine maintenance activity.
This accessory is specifically associated with the 3300 5 mm probe configuration. It should not be confused with the 40113-02 kit, which is listed for 3300 XL 8 mm proximity probes and extension cables. Selecting the correct kit is important because connector dimensions and connection arrangements differ between transducer configurations.
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | Bently Nevada |
| Model | 40113-03 |
| Product Series | 3300 |
| Compatible Probe Family | 3300 5 mm Proximity Probes |
| Product Type | Connector Protector Kit |
| Primary Function | Protection of coaxial connector interfaces |
| Application | 3300 5 mm Probe and Extension Cable Connections |
| Kit Contents | Connector protectors and installation tools |
| Connector Application | 3300 5 mm probe-to-extension-cable connection |
| Protector Material | Fluorosilicone |
| Connector Protection | Environmental protection of connector interfaces |
| Related Connector Protector | 03800001 |
| Related Male Connector Protector | 75 Ω Triaxial / 95 Ω Coaxial Male Connector Protector |
| Dimensions | 350 × 40 × 200 mm |
| Weight | 0.45 kg |
Product Features
- 3300 5 mm Compatibility: Intended for connector protection on Bently Nevada 3300 5 mm proximity probes.
- Connector Protection: Covers the exposed connection interfaces between the probe and extension cable.
- Environmental Protection: Helps reduce environmental exposure at coaxial connector joints.
- Installation Tools Included: Supplied with tools for fitting the connector protectors.
- Probe-Side Protection: Supports installation of the female connector protector on the 5 mm probe lead.
- Extension Cable Compatibility: Works with the corresponding male connector protector on the extension cable.
- Fluorosilicone Protector Material: Used in the connector protector construction.
- Maintenance Accessory: Can be used during new installations, connector replacement, and maintenance work.
- System Connection Protection: Helps maintain the physical protection of the proximity transducer connection.
- Dedicated Accessory Reference: Provides a specific kit reference for 3300 5 mm connector protection.
Product Working Principle
The 40113-03 does not perform vibration measurement or signal conditioning. Its function is mechanical and environmental protection of the electrical connector interfaces used in the 3300 5 mm proximity transducer system.
A typical installation consists of three main electrical components:
3300 5 mm Probe → Extension Cable → Proximitor Sensor
The probe detects changes in the distance between its sensing tip and the rotating shaft. Its electrical signal travels through the extension cable to the Proximitor Sensor, which processes the signal for the machinery monitoring system.
The connection between the probe lead and extension cable is an important part of this measurement chain. The 40113-03 kit supplies connector protectors and installation tools for protecting this interface.
The female connector protector is fitted onto the 3300 5 mm probe lead. It connects with the corresponding male connector protector installed on the extension cable. Once assembled, the protectors form a protective covering around the connector joint.
This arrangement helps reduce exposure to environmental contaminants and protects the connection during normal equipment operation.
The kit is particularly useful when the probe and extension cable are installed in areas where the connection cannot be placed inside a fully protected enclosure. It adds a dedicated protective layer without changing the electrical measurement principle of the proximity transducer system.
Role in Bently Nevada 3300 5 mm Proximity Transducer System Architecture
The 40113-03 supports the physical protection of the connection between the proximity probe and extension cable in the Bently Nevada 3300 5 mm measurement architecture.
Although it is not an active electrical component, its position within the installation is important because the probe-to-extension-cable interface must remain properly connected and protected.
Rotating Shaft → 3300 5 mm Proximity Probe → Connector Protector Assembly → 3300 XL Extension Cable → 3300 XL Proximitor Sensor → Machinery Monitoring System
| System Component | Function |
|---|---|
| 3300 5 mm Proximity Probe | Detects shaft vibration and displacement |
| 40113-03 Connector Protector Kit | Provides connector protection and installation tools |
| 03800001 Female Connector Protector | Fits onto the 3300 5 mm probe lead |
| Male Connector Protector | Fits onto the extension cable and connects with the probe-side protector |
| 3300 XL Extension Cable | Carries the proximity measurement signal |
| 3300 XL Proximitor Sensor | Processes the probe and extension cable signal |
| Machinery Monitoring System | Receives and evaluates the measurement output |
| Machinery Protection System | Uses monitoring information for equipment protection |
The 40113-03 is an accessory within the connection arrangement rather than a signal-processing or monitoring module. Its selection should follow the probe and extension cable connector configuration.
Industrial Applications
The 40113-03 is applicable to industrial installations using Bently Nevada 3300 5 mm proximity probes, particularly where additional protection of field connector interfaces is required.
| Industrial Application | Typical Use |
|---|---|
| Steam Turbines | Protecting proximity probe connections used for shaft vibration monitoring |
| Gas Turbines | Protecting probe-to-cable interfaces near rotating equipment |
| Centrifugal Compressors | Protecting sensor connections near bearing housings |
| Refinery Compressor Trains | Supporting connector protection in machinery monitoring installations |
| Industrial Pumps | Protecting proximity measurement connections |
| Power Generation Plants | Maintaining protected connections in turbine monitoring systems |
| Petrochemical Facilities | Reducing environmental exposure at sensor cable connections |
| Electric Generators | Supporting protected proximity probe installations |
| Process Gas Compression | Protecting field connections associated with shaft monitoring |
| Industrial Maintenance Operations | Providing connector protection during probe and cable replacement |
Installation and Maintenance
- Verify the Kit Reference: Confirm that the accessory is 40113-03 and intended for the 3300 5 mm proximity probe system.
- Check Connector Compatibility: Verify that the probe and extension cable use the corresponding connector configuration before installing the protectors.
- Inspect the Probe Connector: Examine the probe-side connector for contamination, corrosion, damaged contacts, or mechanical deformation.
- Inspect the Extension Cable Connector: Check the cable-side connector for damage and confirm that it matches the required protector arrangement.
- Identify Protector Orientation: Distinguish the female connector protector fitted to the probe lead from the male connector protector fitted to the extension cable.
- Clean the Connection Area: Remove dirt, oil residue, and loose contamination from the connector surfaces before assembly.
- Use the Supplied Installation Tools: Follow the appropriate fitting procedure using the installation tools included with the kit.
- Check Connector Engagement: Confirm that the probe-side and cable-side protector components are properly connected after installation.
- Avoid Excessive Mechanical Force: Do not apply unnecessary pulling, twisting, or bending force to the probe lead or extension cable.
- Inspect Cable Routing: Maintain suitable cable routing and bend radius to prevent mechanical stress around the protected connector joint.
- Verify Measurement Continuity: After installation, check the proximity transducer signal at the monitoring system to confirm that the connection remains functional.
- Record Maintenance Details: Document the installed kit reference, probe model, extension cable identification, and inspection results.
If a proximity measurement signal becomes unstable after connector maintenance, inspect the electrical connector engagement and cable condition before assuming that the probe or Proximitor Sensor has failed.
Compatible System Components
| Component | Function |
|---|---|
| Bently Nevada 3300 5 mm Proximity Probe | Provides non-contacting shaft measurement |
| Bently Nevada 3300 XL Extension Cable | Connects the proximity probe to the Proximitor Sensor |
| Bently Nevada 3300 XL Proximitor Sensor | Conditions the proximity measurement signal |
| Bently Nevada 03800001 | Female connector protector for 3300 5 mm probe leads |
| Bently Nevada Male Connector Protector | Protects the extension cable connector |
| Bently Nevada 40180-03 | Package containing 10 pairs of 75 Ω coaxial connector protectors |
| Bently Nevada 136536-01 | Connector protector adapter for specified older installation tools |
| Bently Nevada 330153 Series | ClickLoc connector kit for compatible 3300 series probes and extension cables |
| Bently Nevada 163356 | Connector crimp tool kit for specified connector installations |
Recommended Related Models
| Model / Part Number | Product Type | Typical Application |
|---|---|---|
| Bently Nevada 40113-02 | 3300 XL 8 mm Connector Protector Kit | Connector protection for 8 mm proximity probes |
| Bently Nevada 40180-03 | 75 Ω Coaxial Connector Protectors | Replacement connector protection components |
| Bently Nevada 03800001 | Female Connector Protector | Protection of 3300 5 mm probe lead connections |
| Bently Nevada 136536-01 | Connector Protector Adapter | Compatibility with specified older installation tools |
| Bently Nevada 330153-05 | 3300 NSv Connector Kit | Connector replacement for compatible NSv probes and extension cables |
| Bently Nevada 163356 | Connector Crimp Tool Kit | Installation of specified coaxial connector components |
Key Advantages
- Specifically intended for Bently Nevada 3300 5 mm proximity probes.
- Includes connector protectors and installation tools.
- Protects the probe-to-extension-cable connection.
- Helps reduce environmental exposure at connector interfaces.
- Uses dedicated male and female connector protector arrangements.
- Supports maintenance and replacement work on proximity transducer connections.
- Provides additional physical protection without changing the measurement circuit.
Technical FAQs
1. What is the main purpose of the Bently Nevada 40113-03?
The 40113-03 is used to protect the connector interfaces of Bently Nevada 3300 5 mm proximity probes and their extension cables. The kit includes connector protectors and installation tools, allowing the connection joint to receive additional environmental protection.
2. Can the 40113-03 be used with 3300 XL 8 mm proximity probes?
The 40113-03 is specified for 3300 5 mm probes. The corresponding connector protector kit for 3300 XL 8 mm probes is 40113-02. These two kit references should not be treated as interchangeable without verifying the connector arrangement.
3. Where are the connector protectors installed?
The female connector protector is installed on the 3300 5 mm probe lead. It connects with the corresponding male connector protector fitted to the extension cable. Together, they cover the connector interface and help protect it from environmental exposure.
4. Does the 40113-03 affect the electrical measurement signal?
The kit is a mechanical and environmental protection accessory rather than an electrical signal-conditioning component. It does not generate or process vibration signals. Its purpose is to protect the connector interface while the probe, extension cable, and Proximitor Sensor perform their normal measurement functions.