Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |

The Schneider Electric NW40HA MasterPact NW Switch Disconnector is a high-current switching and isolation device designed for low-voltage electrical distribution systems. It belongs to the MasterPact NW product family and is intended for demanding industrial and commercial installations where reliable switching and electrical isolation are essential.
With a rated operational current of 4000 A and a rated operational voltage of up to 690 V AC, the NW40HA is designed for large-scale power distribution applications. It can be used to connect, disconnect, and isolate electrical circuits under the operating conditions specified for the device.
An important distinction is that the NW40HA is a switch disconnector, not an automatic circuit breaker with an integrated overcurrent trip unit. It provides switching and isolation functions, while overload and short-circuit protection must be provided by an appropriately coordinated protective device, such as a circuit breaker, relay, or fuse arrangement.
The NW40HA supports four-pole configurations and is available in different mounting arrangements depending on the complete product reference. The fixed-mounted configuration is suitable for installations where the switching device is permanently installed in a distribution assembly. Its push-button operating mechanism provides a straightforward method of manual operation.
For industrial facilities, the NW40HA can form part of a main distribution system, power isolation arrangement, or high-current electrical installation. Correct selection requires consideration of rated voltage, current, short-circuit conditions, number of poles, mounting type, and the protective equipment used alongside the switch.
| Parameter | Specification |
|---|---|
| Brand | Schneider Electric |
| Product Series | MasterPact NW |
| Model | NW40HA |
| Product Type | Switch Disconnector |
| Device Category | High-Current Electrical Switching and Isolation Device |
| Rated Operational Current | 4000 A |
| Rated Operational Voltage | Up to 690 V AC |
| Rated Insulation Voltage | 1000 V AC |
| Rated Impulse Withstand Voltage | 12 kV |
| Rated Frequency | 50/60 Hz |
| Number of Poles | 4P configuration |
| Breaking Capacity Class | HA |
| Rated Short-Circuit Making Capacity | 143 kA at 220–690 V AC, according to the applicable product rating |
| Short-Time Withstand Capability | Verify the exact product configuration and technical documentation |
| Operating Method | Push-button |
| Mounting Type | Fixed mounting |
| Maximum Operating Frequency | 10 operations per hour |
| Isolation Function | Supported |
| Applicable Standard | IEC 60947-3 |
| Dimensions | 537 × 352 × 297 mm |
| Weight | 80 kg |
| Typical Application | High-current low-voltage power distribution and circuit isolation |
Important: The NW40HA is a switch disconnector. Its short-circuit making and withstand ratings must not be interpreted as an independent short-circuit interruption or overcurrent protection rating. Confirm the complete catalog reference and the associated protection arrangement before installation.
The NW40HA is designed to provide controlled switching and electrical isolation in high-current distribution systems. Its primary role is to establish or interrupt an electrical connection under the permitted operating conditions and provide an isolation function for maintenance and system management.
The NW40HA is rated for a continuous operational current of 4000 A under the specified conditions. Its switching contacts and internal construction are designed for high-current electrical distribution applications.
In a large industrial facility, the device may be installed in a main distribution assembly or a high-capacity feeder circuit. It allows authorized personnel to operate the relevant electrical connection according to the system’s switching procedures.
The actual operating limits depend on voltage, load category, ambient conditions, installation arrangement, and the manufacturer’s specifications.
One of the main functions of the NW40HA is to provide a means of electrical isolation.
During maintenance, inspection, or equipment replacement, the relevant circuit may need to be disconnected from its power source. The isolation function helps establish the required disconnected condition when the device is operated according to the manufacturer’s instructions and the applicable safety procedures.
Electrical isolation must always be verified using approved procedures and suitable test equipment. Operating a switch disconnector does not replace lockout/tagout procedures or the verification of absence of voltage.
The four-pole configuration allows the device to switch four conductors as part of an appropriately designed distribution system.
This arrangement may be used in systems where all relevant conductors need to be disconnected together. The application must be designed according to the electrical network configuration, grounding arrangement, and applicable installation standards.
The actual pole configuration should be confirmed from the complete product reference and nameplate.
The NW40HA has a published short-circuit making capacity of up to 143 kA under specified voltage conditions.
This rating describes the device’s ability to make a connection under defined short-circuit conditions. It does not mean that the switch can independently interrupt a short-circuit current of 143 kA.
The upstream and downstream protective arrangement must be engineered to ensure that fault currents are detected and cleared by suitable protective equipment.
The NW40HA uses a push-button operating method. This provides a direct operating interface for authorized personnel.
In a distribution cabinet, the operating mechanism forms part of the electrical switching arrangement. Operators should follow the approved switching sequence and ensure that all associated interlocks and safety requirements are satisfied.
The NW40HA can be used as part of a high-capacity electrical distribution system. Its role is generally associated with switching and isolation rather than independent overload or short-circuit protection.
Large factories and industrial facilities often use main distribution assemblies to receive and distribute electrical power to multiple production areas.
A high-current switch disconnector can provide a switching and isolation point within such an arrangement. Its 4000 A rating makes it suitable for installations designed around corresponding current requirements.
The device may be considered for transformer-side or feeder-side isolation arrangements where its voltage, current, pole configuration, and switching category are appropriate.
The complete protection design must account for transformer characteristics, prospective fault current, feeder impedance, and the protective devices installed in the system.
Because the NW40HA is not an automatic circuit breaker with an integrated overcurrent trip unit, it must be coordinated with suitable protective equipment.
Depending on the system design, this may include:
The coordination study should confirm that fault detection and interruption are provided by the appropriate devices.
The NW40HA can provide an isolation point for maintenance activities when incorporated into a properly designed electrical installation.
Its use should be supported by documented switching procedures, appropriate interlocks, and verification of electrical isolation before work begins.
The MasterPact NW40HA is intended for high-current electrical distribution applications. Its 4000 A rating makes it relevant to installations with substantial power demands.
Large manufacturing facilities require electrical distribution equipment capable of handling high operating currents.
The NW40HA may be installed in a main distribution assembly as a switching and isolation device. It can support the management of major incoming or outgoing circuits when selected for the system’s electrical requirements.
Industrial power distribution centers supply electricity to production equipment, utility systems, auxiliary installations, and building services.
A high-current switch disconnector can provide an operating and isolation point within the distribution arrangement. Correct coordination with protective equipment is essential.
Transformers supply power to different voltage levels within industrial facilities. Switch disconnectors may be used in associated distribution arrangements where the voltage and current ratings are suitable.
The selection process should consider transformer capacity, available fault current, system grounding, and the protective equipment installed on both sides of the transformer.
Steel processing, mining, chemical production, and other heavy industrial operations may require high-capacity distribution equipment.
The NW40HA can be considered for suitable switching and isolation duties in these installations. The final application must meet the device’s operational ratings and installation requirements.
Data centers, large commercial buildings, and infrastructure facilities may use high-current distribution equipment to manage power supplied to different sections of the installation.
A switch disconnector can support electrical isolation and distribution management where its ratings and operating category match the system design.
The installation of a 4000 A switch disconnector requires careful electrical and mechanical planning. It should be performed by qualified personnel familiar with high-current distribution systems.
Before installation, confirm the full product reference, number of poles, mounting arrangement, and nameplate information.
The NW40HA family includes different configurations. Fixed and drawout arrangements have different mounting and connection requirements, so the physical unit must match the distribution assembly.
Check the following system parameters:
The 4000 A operational rating should not be used as the only selection criterion. Short-circuit coordination and the complete electrical design are equally important.
The supplied dimensions are 537 × 352 × 297 mm, and the supplied weight is 80 kg.
Verify the dimensions against the manufacturer’s drawing for the exact configuration before preparing the switchboard. The mounting structure must support the device’s weight and withstand the mechanical forces associated with operation and fault conditions.
Allow adequate space for electrical connections, operating access, inspection, and maintenance.
Busbar connections and conductor arrangements must be designed for the rated current and applicable temperature-rise requirements.
Connection surfaces should be clean and correctly prepared. Tightening torques must follow the manufacturer’s specifications.
Incorrect connection design or poor contact quality can lead to excessive temperature rise, equipment damage, and operational problems.
The NW40HA must be used with an appropriate protective arrangement.
Engineers should verify that the associated circuit breaker, relay, or fuse system can detect and clear faults within the required limits. The switch disconnector must not be treated as a substitute for automatic overcurrent protection.
Before energizing the installation, qualified personnel should inspect:
Commissioning should follow the manufacturer’s instructions and the applicable electrical safety standards.
The NW40HA is generally integrated into a larger electrical distribution assembly. The following components may be used in a coordinated installation, depending on the system design.
| Component | Function | Integration Considerations |
|---|---|---|
| Upstream circuit breaker | Provides overcurrent and short-circuit protection | Must be coordinated with the switch disconnector |
| Protection relay | Detects abnormal electrical conditions | Select according to system protection requirements |
| Current transformer | Supplies current signals for monitoring and protection | Verify ratio, accuracy, and burden |
| Busbar assembly | Carries high-current electrical power | Must meet current and temperature-rise requirements |
| Distribution switchboard | Houses and supports electrical equipment | Confirm mechanical compatibility and clearances |
| Electrical interlock | Prevents unsafe switching sequences | Coordinate with the complete operating arrangement |
| Grounding system | Provides the required protective grounding path | Follow the installation’s grounding design |
| Power monitoring equipment | Measures electrical operating conditions | Select suitable sensors and measurement interfaces |
| Isolation and safety accessories | Support safe maintenance procedures | Follow the applicable safety requirements |
These components are examples of equipment that may form part of a complete installation. They are not necessarily included with the NW40HA.
The MasterPact NW family includes different current ratings, switching categories, and mounting configurations. A replacement should be selected according to the required electrical function, not simply the physical appearance or frame size.
| Related Model | Product Category | Replacement Considerations |
|---|---|---|
| NW32HA | MasterPact NW switch disconnector | Lower current rating; verify system requirements |
| NW40HA | MasterPact NW switch disconnector | Same model family and nominal 4000 A rating |
| NW50HA | MasterPact NW switch disconnector | Higher current rating; verify dimensions and system coordination |
| NW40H2 | MasterPact NW circuit breaker | Different protection function; not a direct equivalent |
| NW40H3 | MasterPact NW circuit breaker | Different switching and protection characteristics |
| NW40HC | MasterPact NW high-performance switch configuration | Verify application, mounting, and interrupting arrangement |
Before replacing the NW40HA, engineers should compare:
A circuit breaker may offer integrated overcurrent protection, but that does not make it an automatic mechanical or electrical substitute for a switch disconnector. The replacement must be approved for the complete installation.
The 4000 A operational current rating makes the NW40HA suitable for appropriately designed high-current distribution systems.
The device provides an isolation function that can support maintenance and electrical system management when used with proper safety procedures.
Its rated operational voltage of up to 690 V AC supports a range of industrial low-voltage distribution applications.
The four-pole arrangement supports applications requiring coordinated switching of four conductors.
The MasterPact NW family is used in large-scale electrical distribution installations. Its product range provides different current ratings and configuration options for industrial power systems.
The push-button operating method provides a direct operating interface for authorized personnel.
The switch disconnector can be incorporated into a broader protection and distribution arrangement alongside appropriately selected circuit breakers, relays, and other protective devices.
The Schneider Electric NW40HA is a MasterPact NW switch disconnector designed for high-current electrical switching and isolation in low-voltage distribution systems.
No. The NW40HA is a switch disconnector. It does not provide the same integrated overcurrent trip protection as an automatic circuit breaker. Appropriate protective devices must be installed as part of the electrical system.
Its rated operational current is 4000 A under the specified operating conditions.
The device is rated for operation up to 690 V AC at 50/60 Hz, according to its applicable product specifications.
The product is available in four-pole configurations. Confirm the exact pole arrangement from the complete product reference and nameplate.
HA identifies the product’s switching category within the MasterPact NW switch-disconnector range. It should not be interpreted as an integrated automatic overcurrent protection function.
No. It has specified short-circuit making and withstand capabilities, but it is not an automatic circuit breaker that independently detects and interrupts overcurrent faults. A suitable protective device must provide fault interruption.
The supplied product dimensions are 537 × 352 × 297 mm, with a weight of approximately 80 kg. Verify the exact mounting configuration before installation or transportation.
The switch disconnector is designed in accordance with IEC 60947-3 requirements for switches, disconnectors, switch-disconnectors, and fuse-combination units.
Verify the full catalog reference, rated current, voltage, pole configuration, mounting type, short-circuit ratings, physical dimensions, and associated protective-device arrangement. A similar-looking MasterPact NW circuit breaker is not necessarily a suitable substitute.
When purchasing the Schneider Electric NW40HA, begin by confirming that the required equipment is a switch disconnector rather than an automatic circuit breaker. This distinction is essential because the two devices perform different electrical functions.
Check the complete product reference and confirm the number of poles, mounting arrangement, operating mechanism, voltage rating, and current rating. For existing installations, compare the replacement unit with the original nameplate and the switchboard drawings.
For new or refurbished equipment, request clear photographs of the nameplate, terminals, operating mechanism, and connection points. Confirm the unit’s condition, included accessories, inspection history, and applicable warranty terms.
During routine maintenance, qualified personnel should inspect the operating mechanism, electrical connections, contact condition, mounting structure, and signs of overheating. Maintenance procedures and intervals should follow the manufacturer’s documentation and applicable electrical safety standards.
Because the device is rated for very high current, connection quality and mechanical installation are particularly important. Poor busbar alignment, insufficient contact pressure, or incorrect connection torque can result in excessive heating and equipment failure.
Before returning the installation to service, verify the associated protective devices and switching interlocks. Ensure that operating personnel understand the difference between switching isolation and automatic fault protection.
The Schneider Electric NW40HA MasterPact NW Switch Disconnector is a high-current electrical switching and isolation device designed for industrial and commercial power distribution systems. With a rated operational current of 4000 A and a rated operational voltage of up to 690 V AC, it is suitable for appropriately engineered high-capacity distribution applications.
Its primary functions are electrical switching and isolation rather than independent overload or short-circuit protection. For this reason, the NW40HA must be incorporated into a coordinated electrical system with suitable protective equipment.
Accurate product identification, mounting compatibility, busbar design, and protection coordination are essential when purchasing, installing, or replacing this device.