Company Information
E-mail		[email protected]
Mobile		+8615980777398
Whatsapp		+8615980777398
WeChat		15980777398

Product Overview

The Ingersoll Rand 47674732001 39218193 High Temperature Grease is a specialized maintenance lubricant intended for use in compatible industrial compressor and machinery maintenance applications. High-temperature grease is generally used where conventional lubrication may not provide suitable performance under elevated-temperature operating conditions.

Lubrication is an important part of industrial equipment maintenance because moving mechanical components require protection against friction, wear, surface contact, and heat generation. A suitable grease can help maintain a stable lubricating film between contacting surfaces and support reliable mechanical operation.

The product is identified by the Ingersoll Rand reference 47674732001 and part number 39218193. The supplied physical dimensions are 95 × 95 × 80 mm, with a listed weight of 0.40 kg.

The exact application of this grease should be confirmed against the equipment maintenance requirements before use. Grease products are not automatically interchangeable simply because they have similar appearance or packaging size. Compatibility with the bearing, component material, temperature range, mechanical load, and existing lubricant should be verified for the intended application.

---

Technical Specifications

Parameter	Specification
Manufacturer	Ingersoll Rand
Reference Number	47674732001
Part Number	39218193
Product Type	High Temperature Grease
Primary Function	High-temperature mechanical lubrication
Application	Compatible industrial equipment and compressor maintenance
Dimensions	95 × 95 × 80 mm
Weight	0.40 kg
Installation	Applied during equipment maintenance
Typical Use	Lubrication of compatible mechanical components

Specification note: The dimensions and weight above are based on the supplied product information. Exact grease composition, base oil type, thickener, NLGI grade, operating temperature range, viscosity, load rating, compatibility, and recommended application points should be confirmed against the applicable equipment and lubricant specification before use.

---

What Is the Ingersoll Rand 47674732001 39218193?

The Ingersoll Rand 47674732001 39218193 is identified as a High Temperature Grease intended for compatible industrial maintenance applications.

Grease is a semi-solid lubricant commonly used on mechanical components where a liquid oil may not remain effectively at the lubrication point.

Unlike a circulating oil system, grease remains at or near the point of application and forms a lubricating layer between moving surfaces.

In industrial equipment, grease can be used to support the operation of components such as:

• Bearings
• Bushings
• Pins
• Mechanical joints
• Sliding surfaces
• Other compatible moving components

The exact application points for 39218193 should be determined from the maintenance requirements of the relevant equipment.

---

High Temperature Grease Working Principle

The purpose of a high-temperature grease is to maintain lubrication under conditions where mechanical components operate at elevated temperatures.

A simplified lubrication process can be represented as:

Grease Application → Lubricating Film → Reduced Surface Contact → Controlled Friction and Wear

When the equipment operates, mechanical surfaces move relative to one another.

Without sufficient lubrication, direct metal-to-metal contact can increase friction and wear.

Grease provides a lubricating layer between compatible surfaces, helping to reduce direct contact.

Under elevated-temperature conditions, the grease must maintain suitable physical and lubricating characteristics for the intended application.

The actual performance depends on the grease formulation and operating environment.

---

Importance of Lubrication in Industrial Equipment

Lubrication plays a major role in maintaining mechanical equipment.

Friction Reduction

Proper lubrication can reduce friction between contacting moving surfaces.

Lower friction can help reduce unnecessary mechanical resistance and heat generation.

Wear Control

A suitable lubricant can help minimize direct surface contact and reduce wear.

Heat Management

Mechanical friction generates heat. Appropriate lubrication can help control friction-related heat generation.

Component Protection

Lubrication helps protect compatible mechanical surfaces from excessive contact and wear.

Maintenance Support

Correct lubrication practices can contribute to predictable maintenance intervals and stable equipment operation.

---

Role in Compressor Maintenance

Industrial compressors contain numerous mechanical components that may require lubrication according to their design and maintenance procedures.

A high-temperature grease can be relevant to maintenance tasks involving compatible mechanical components that operate under elevated temperatures.

The lubrication system of the compressor itself may use a dedicated compressor oil circuit, while grease is used separately for selected mechanical components.

This distinction is important.

Grease should not automatically be added to a compressor oil circuit.

The lubricant should only be applied to components specifically identified for grease lubrication.

---

Industrial Applications

Industrial Air Compressors

Compatible compressor maintenance applications may involve lubrication of selected mechanical components where a high-temperature grease is specified.

Manufacturing Machinery

Industrial manufacturing equipment may contain bearings, joints, and moving mechanical assemblies that require periodic lubrication.

Material Handling Equipment

Conveyors and other material-handling systems can include mechanical components that operate continuously and may require grease lubrication.

Production Machinery

High-cycle production equipment may require regular lubrication to maintain reliable mechanical movement.

Industrial Bearings

Bearings operating under elevated-temperature conditions may require specialized grease selected for the specific bearing and application.

Mechanical Assemblies

Various industrial mechanical assemblies can require grease to maintain smooth movement and reduce wear.

The exact use of 39218193 should always be matched to the applicable equipment maintenance specification.

---

High Temperature Grease vs. General-Purpose Grease

High-temperature applications can place additional demands on a lubricant.

A general-purpose grease may not necessarily provide the required performance under elevated-temperature conditions.

Factors that influence grease selection include:

• Operating temperature
• Mechanical load
• Speed
• Bearing or component type
• Environment
• Moisture exposure
• Contamination
• Lubrication interval
• Existing lubricant
• Material compatibility

The term High Temperature Grease identifies the intended lubricant category, but the exact performance characteristics of 39218193 should be confirmed from the applicable product specification before selecting it for a particular application.

---

Lubrication Procedure

Proper application is important for achieving reliable lubrication.

Step 1: Identify the Lubrication Point

Determine the component that requires grease and verify that it is specified for grease lubrication.

Step 2: Confirm the Lubricant

Verify:

Ingersoll Rand 47674732001

Part Number: 39218193

Confirm that the lubricant is appropriate for the equipment and application.

Step 3: Prepare the Equipment

Stop the equipment and follow the applicable maintenance and isolation procedure.

Step 4: Clean the Lubrication Area

Remove dirt, dust, old lubricant, or other contaminants from the application area where practical.

Step 5: Apply the Correct Amount

Apply grease according to the equipment manufacturer’s maintenance requirements.

Over-lubrication can be undesirable in many mechanical applications because excessive grease may increase friction, heat generation, or seal pressure.

Step 6: Inspect the Component

Check the lubricated component for abnormal wear, damage, contamination, or leakage.

Step 7: Return the Equipment to Service

After completing the maintenance procedure, operate the equipment under controlled conditions and monitor its behavior.

---

Maintenance Considerations

Follow the Correct Lubrication Interval

Grease should be applied according to the maintenance requirements of the equipment.

The correct interval depends on the component, operating conditions, temperature, speed, load, and environment.

Avoid Over-Lubrication

Adding excessive grease does not necessarily improve lubrication.

Over-greasing can contribute to heat generation and may cause problems in certain bearing applications.

Avoid Under-Lubrication

Insufficient grease can increase friction and wear.

Keep Lubricant Clean

Contaminated grease can introduce unwanted particles into a mechanical component.

Prevent Cross-Contamination

Different grease types should not be mixed unless compatibility has been confirmed.

---

Troubleshooting Lubrication Problems

Component Runs Hot

Possible causes include:

• Insufficient lubrication
• Excessive lubrication
• Incorrect lubricant
• Excessive mechanical load
• Bearing damage
• Alignment problems
• Operating conditions outside the intended range

Temperature should therefore be evaluated together with the mechanical condition of the component.

Excessive Noise

Unusual mechanical noise may be associated with:

• Insufficient lubrication
• Contaminated lubricant
• Component wear
• Bearing damage
• Misalignment
• Mechanical looseness

Grease replacement alone may not correct a mechanically damaged component.

Increased Vibration

Possible causes include:

• Bearing wear
• Shaft or coupling problems
• Misalignment
• Mechanical imbalance
• Lubrication problems
• Loose mounting

A complete mechanical inspection may be necessary.

Grease Leakage

Grease leakage can result from:

• Excessive grease
• Damaged seals
• Improper application
• Component damage
• Excessive operating temperature

The source of the leakage should be identified before adding more lubricant.

---

Storage and Handling

The Ingersoll Rand 47674732001 39218193 High Temperature Grease should be stored and handled carefully before use.

Recommended general practices include:

• Keep the original container properly closed.
• Protect the product from contamination.
• Avoid unnecessary exposure to moisture and dust.
• Store the product according to the applicable lubricant storage requirements.
• Avoid mixing different grease products without confirmed compatibility.
• Inspect packaging for damage before use.

The supplied package dimensions are 95 × 95 × 80 mm, which can also be useful for inventory and storage planning.

---

Replacement and Lubricant Compatibility

When replacing an existing grease product, the complete product identification should be checked.

Important information includes:

• Reference number
• Part number
• Equipment model
• Component being lubricated
• Existing lubricant
• Operating temperature
• Mechanical load
• Operating speed
• Environmental conditions
• Manufacturer’s lubrication requirements

The 39218193 part number should be verified before use.

A different grease should not automatically be substituted simply because it is also described as a high-temperature lubricant.

Different grease formulations can have different base oils, thickeners, additives, viscosity characteristics, and compatibility properties.

---

Compatible Equipment Considerations

The 47674732001 39218193 should be treated as an equipment-specific maintenance product unless broader compatibility has been confirmed.

When planning maintenance, technicians should identify:

Item	Verification Requirement
Equipment	Confirm compressor or machine model
Lubrication Point	Confirm grease-lubricated component
Lubricant	Confirm required grease
Temperature	Confirm operating conditions
Load	Confirm mechanical loading
Speed	Confirm component operating speed
Existing Grease	Check compatibility before changing products
Quantity	Follow equipment maintenance requirements
Maintenance Interval	Follow the applicable service schedule

This approach reduces the risk of applying an unsuitable lubricant.

---

Physical Dimensions and Weight

The supplied physical information for the Ingersoll Rand 47674732001 39218193 is:

Product Type: High Temperature Grease

Dimensions: 95 × 95 × 80 mm

Weight: 0.40 kg

These values can be useful for:

• Warehouse management
• Spare-parts inventory
• Maintenance planning
• Packaging
• Transportation
• Storage organization
• Replacement preparation

The listed 0.40 kg value should be treated as the supplied product weight information and should not be interpreted as a specific grease fill volume.

---

Preventive Maintenance Best Practices

Maintain a Lubrication Schedule

Record lubrication activities and maintenance dates for critical mechanical components.

Use the Correct Grease

Always verify the lubricant specified for the particular component.

Monitor Component Condition

Observe temperature, vibration, noise, and mechanical behavior during routine maintenance.

Keep Lubrication Equipment Clean

Grease guns, fittings, and application tools should be kept clean to reduce contamination.

Do Not Mix Unknown Greases

Mixing incompatible grease products can change lubricant performance.

Record Lubricant Changes

When replacing a lubricant, document the part number and equipment on which it was used.

Inspect Before Relubrication

Lubrication should not replace inspection of worn or damaged mechanical components.

---

Key Advantages

The Ingersoll Rand 47674732001 39218193 High Temperature Grease provides a dedicated lubrication option for compatible industrial maintenance applications.

Key characteristics include:

• High-temperature lubrication application
• Supports mechanical component lubrication
• Helps reduce friction and surface wear
• Suitable for compatible industrial maintenance tasks
• Ingersoll Rand reference 47674732001
• Part number 39218193
• Supplied dimensions of 95 × 95 × 80 mm
• Listed weight of 0.40 kg
• Convenient for planned maintenance and spare-parts inventory

---

Technical FAQs

What is Ingersoll Rand 47674732001 39218193?

It is a High Temperature Grease identified by Ingersoll Rand reference 47674732001 and part number 39218193, intended for compatible industrial maintenance applications.

What is high-temperature grease used for?

High-temperature grease is generally used to lubricate compatible mechanical components operating under elevated-temperature conditions where an appropriate specialized lubricant is required.

What are the dimensions of 39218193?

The supplied dimensions are 95 × 95 × 80 mm.

How much does 39218193 weigh?

The supplied weight is 0.40 kg.

Can this grease be used in any industrial bearing?

No. Grease compatibility depends on the bearing design, temperature, load, speed, environment, existing lubricant, and equipment manufacturer’s requirements.

Can different grease products be mixed?

Different grease formulations should not be mixed unless compatibility has been confirmed.

Can this grease be added to compressor oil?

Grease should not be added to a compressor oil circuit unless the equipment documentation specifically requires it. Grease and compressor oil serve different lubrication functions.

What happens if too much grease is applied?

Over-lubrication can increase friction and heat generation and may negatively affect some mechanical components.

What should be checked before using the grease?

Verify the equipment model, lubrication point, required lubricant, operating conditions, existing grease, and maintenance instructions.

How should 39218193 be stored?

Keep the product protected from contamination, moisture, excessive environmental exposure, and physical damage, following the applicable lubricant storage requirements.

---

Conclusion

The Ingersoll Rand 47674732001 39218193 High Temperature Grease is a specialized maintenance lubricant intended for compatible industrial mechanical applications where elevated-temperature lubrication is required. Proper lubrication can help reduce friction, control wear, support component protection, and contribute to reliable machine operation.

The supplied product information identifies the grease with reference 47674732001 and part number 39218193. Its listed dimensions are 95 × 95 × 80 mm, with a supplied weight of 0.40 kg.

For maintenance applications, the correct lubricant should always be matched to the specific equipment and lubrication point. Temperature, load, speed, component type, existing grease, environmental conditions, and lubricant compatibility should be considered before application.

When used according to the applicable maintenance requirements, the Ingersoll Rand 39218193 High Temperature Grease can serve as part of a structured preventive-maintenance program for compatible industrial equipment and mechanical components.