Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |

The Schneider Electric TM2DRA16RT Modicon Relay Output Module is a 16-channel discrete output expansion module designed for industrial automation and programmable logic controller applications. It provides relay-based switching capabilities, allowing a compatible controller to operate external electrical devices such as contactors, indicator lamps, solenoid valves, auxiliary relays, and other discrete loads.
As part of the Modicon TM2 I/O expansion family, the TM2DRA16RT is designed for use with compatible Modicon M238 logic controllers and supported Twido and Advantys OTB systems. Its relay outputs provide electrical switching between the controller’s internal logic and external field devices.
Unlike transistor output modules, relay outputs use electromechanical contacts. This makes them suitable for applications involving different types of discrete loads within the specified voltage and current limits. Each output provides a normally open contact, allowing the controller to switch an external circuit when the corresponding output is activated.
The module provides 16 relay output channels, with a maximum current rating of 2 A per channel and 8 A per output common. It has two output common groups, which are electrically separate from each other. This arrangement allows the module to control different groups of loads while maintaining the required circuit separation.
The TM2DRA16RT uses one removable screw terminal block for field wiring and supports mounting on a symmetrical 35 mm DIN rail. Its compact dimensions make it suitable for control cabinets where space-efficient I/O expansion is important.
For maintenance and replacement applications, the exact catalog number should be checked carefully. The designation supplied in some product listings as TM2DRA16DT should be verified against the actual nameplate, because the documented module matching the specifications in this article is TM2DRA16RT.
| Parameter | Specification |
|---|---|
| Brand | Schneider Electric |
| Product Series | Modicon TM2 |
| Model | TM2DRA16RT |
| Product Type | Discrete Relay Output Module |
| Number of Outputs | 16 |
| Output Type | Relay |
| Output Contact | 1 NO per channel |
| Maximum Current per Channel | 2 A |
| Maximum Current per Output Common | 8 A |
| Number of Output Common Groups | 2 |
| Maximum Switching Voltage | 240 V AC / 30 V DC |
| Electrical Connection | 1 removable screw terminal block |
| Contact Resistance | ≤ 45 mΩ |
| Response Time | ≤ 10 ms, OFF to ON |
| Response Time | ≤ 5 ms, ON to OFF |
| Isolation Between Channels | 1500 V for 1 minute |
| Isolation Between Channels and Internal Logic | 2300 V for 1 minute |
| Isolation Between Output Groups | 1500 V for 1 minute |
| Mechanical Durability | 20 million cycles |
| Mounting | 35 mm symmetrical DIN rail |
| Local Signaling | Display block |
| Dimensions | 90 × 84.6 × 27.3 mm |
| Weight | 0.145 kg |
| Typical Application | Industrial PLC relay output control |
Note: Specifications above refer to the documented TM2DRA16RT model. Confirm the catalog number and terminal arrangement before ordering a replacement.
The TM2DRA16RT converts digital output commands from a compatible controller into switching actions at its relay contacts. Each channel operates as an independent normally open relay output, subject to the module’s shared common-group wiring and electrical ratings.
A relay is an electrically operated switching device. When the controller activates an output, the corresponding relay changes the state of its contact, allowing the connected external circuit to operate.
When the output is deactivated, the normally open contact returns to its open state. This provides a straightforward method of controlling field devices through PLC logic.
Relay outputs are useful where a control system needs to switch loads that are not directly compatible with transistor output circuits. However, the actual load voltage and current must remain within the specified switching limits.
The module provides 16 output points, allowing a PLC system to control multiple devices from a single expansion module.
Typical output applications include:
Each channel can be addressed through the controller’s output mapping. The PLC program determines when each output should change state according to machine logic, sensor conditions, and operating sequences.
The TM2DRA16RT has two output common groups. The terminals belonging to each common group are internally connected, while the two groups are electrically separate.
This arrangement is important when planning the field wiring. Engineers should identify the correct common terminals and ensure that the external circuits are connected to the intended group.
The common-group current limit must also be considered. Although each channel has a maximum rating of 2 A, the total current through an output common must not exceed 8 A.
The module provides specified isolation between output channels, between output channels and internal logic, and between output channel groups.
Isolation helps separate the field-side switching circuits from the controller’s internal electronics. It is an important design characteristic in industrial installations where different field circuits may operate at different electrical potentials.
Isolation ratings do not replace proper grounding, protective devices, or safe wiring practices.
The module includes local signaling to help maintenance personnel identify output conditions during inspection and troubleshooting.
Visual indication can make it easier to compare the expected PLC output state with the field-device response. If an output is commanded but the connected equipment does not operate, technicians can investigate the relay contact, terminal wiring, load supply, and external device.
The TM2DRA16RT serves as the output interface between a programmable controller and external electrical equipment. It allows PLC logic to control multiple field devices without requiring a separate relay for every signal where the module’s built-in relay contacts are suitable.
Industrial controllers often require additional output points as machinery becomes more complex. The TM2DRA16RT provides 16 additional relay outputs for supported control platforms.
These outputs can be assigned to machine functions such as valve activation, alarm signaling, auxiliary motor control, and equipment interlocking.
The module’s compatibility should be confirmed against the controller model, firmware, expansion architecture, and applicable hardware documentation.
The relay contacts provide switching interfaces for external loads. For example, a PLC may activate a relay output when a pressure switch indicates that a process condition has been reached.
The output can then operate an appropriate field circuit, provided the voltage, current, load type, and protection arrangement are within the module’s limits.
In automated machinery, multiple output signals are often activated in a specific order. The TM2DRA16RT can provide the discrete switching points needed for these sequences.
A packaging machine, for example, may use separate outputs for a solenoid valve, an alarm lamp, a conveyor contactor, and an auxiliary actuator. The PLC coordinates these outputs according to the programmed production sequence.
Relay outputs can also be used for alarms and status-related functions. A controller may activate an output when a fault occurs, allowing an external indicator or annunciator to notify operators.
The specific behavior depends on the PLC program and the electrical design of the connected alarm circuit.
The TM2DRA16RT is suitable for applications requiring multiple discrete relay outputs within its specified electrical limits.
Packaging equipment uses many discrete electrical devices to coordinate product feeding, positioning, sealing, and discharge.
The module can provide relay switching for compatible solenoid valves, indicator lamps, auxiliary relays, and other control circuits. Its 16 output points allow several functions to be controlled from one expansion module.
Conveyor systems use discrete signals to control contactors, warning lamps, diverter mechanisms, and auxiliary equipment.
The TM2DRA16RT can serve as an output interface between PLC logic and these devices. The actual motor power should normally be switched through appropriately rated motor-control equipment rather than directly through a small PLC relay output.
Industrial pneumatic and hydraulic systems frequently use solenoid valves to control cylinders, actuators, and fluid paths.
The module can switch compatible solenoid valve circuits when their voltage and current requirements fall within the relay contact ratings. Inductive loads require suitable suppression and protection to reduce contact stress.
Water treatment facilities use discrete output signals to operate auxiliary equipment, alarms, and valve-control circuits.
A PLC equipped with relay output expansion can coordinate these devices according to level, pressure, flow, and equipment-status conditions.
Assembly lines often require a large number of discrete output signals for clamps, pneumatic actuators, warning devices, and machine interlocks.
The TM2DRA16RT can provide additional relay output capacity in compatible Modicon control systems, helping organize the electrical interface between the PLC and field equipment.
Utility equipment such as ventilation systems, auxiliary pumps, and equipment-status panels may require discrete switching signals.
The module can support these applications when the field loads are appropriately rated and the controller’s expansion configuration is suitable.
Correct installation is essential for reliable output switching and long-term module operation.
Before installation, confirm that the TM2DRA16RT is supported by the target controller and its expansion architecture.
The module is documented for Modicon M238 applications and has compatibility references to Twido and Advantys OTB systems. Compatibility should be checked against the exact controller model and system documentation.
The module is designed for mounting on a symmetrical 35 mm DIN rail.
Install it securely and ensure that the mounting position provides sufficient clearance for wiring and maintenance. Avoid mechanical stress on the housing and terminal connections.
The TM2DRA16RT uses one removable screw terminal block. Field wiring should follow the module’s terminal diagram and applicable electrical regulations.
Before connecting loads:
Unused terminals should not be used as connection points unless the manufacturer’s documentation explicitly permits it.
Each channel supports a maximum current of 2 A, while each output common group supports a maximum current of 8 A.
These limits must be considered together. A design that keeps every individual channel below 2 A may still exceed the common-group limit if too many loads operate simultaneously.
Engineers should calculate the maximum simultaneous current for each group and include appropriate design margins.
Relay contacts can experience electrical stress when switching inductive loads such as solenoid coils and contactor coils.
Use suitable protective components according to the load type and manufacturer’s instructions. Suppression helps reduce voltage transients and may extend relay contact life.
After installation, configure the module in the controller project and assign the required output addresses.
Test each output individually before placing the equipment into normal operation. Verify the contact state, field-device response, common-group wiring, and protective devices.
Document the final I/O mapping so that future maintenance personnel can identify the function of each channel.
The TM2DRA16RT is used as part of a Modicon-based automation system. The following components may be involved in a typical installation.
| Component | Function | Integration Considerations |
|---|---|---|
| Modicon M238 Controller | Executes PLC logic and manages I/O | Confirm supported expansion configuration |
| Twido Controller | Provides programmable machine control | Verify exact hardware compatibility |
| Advantys OTB System | Provides distributed I/O functionality | Confirm the applicable system configuration |
| 24 V DC Power Supply | Supplies control-system power | Verify voltage and current requirements |
| HMI Panel | Provides operator commands and status displays | Typically exchanges data with the PLC |
| Solenoid Valve | Controls pneumatic or hydraulic flow | Check coil voltage and current |
| Intermediate Relay | Provides an additional switching interface | Select suitable contact and coil ratings |
| Contactor | Switches larger electrical loads | Use appropriate coil and protective circuitry |
| Circuit Protection | Protects field wiring and loads | Select fuses according to the load and wiring |
| 35 mm DIN Rail | Supports module installation | Ensure secure mounting and sufficient cabinet space |
The listed components are examples of equipment that may be used in an application. They are not necessarily supplied with the output module.
When replacing a TM2DRA16RT, the new module must match the required output type, channel count, electrical ratings, terminal arrangement, and controller compatibility.
| Related Model | Description | Replacement Considerations |
|---|---|---|
| TM2DRA8RT | 8-point relay output module | Fewer output channels; verify available I/O capacity |
| TM2DRA16RT | 16-point relay output module | Same documented model for like-for-like replacement |
| TM2DDO16UK | 16-point transistor sink output module | Different output technology and electrical characteristics |
| TM2DDO16TK | 16-point transistor source output module | Requires compatible 24 V DC field circuits |
| TM2DMM8DRT | Mixed discrete I/O module | Different input/output arrangement |
| TM3DQ16R | Modicon TM3 relay output module | Different product family and controller compatibility |
A transistor output module should not be treated as a direct substitute for a relay output module. The switching method, voltage requirements, current limits, load compatibility, and wiring are different.
Before ordering a replacement, compare the full catalog number and confirm:
The module provides 16 discrete relay outputs, allowing a compatible controller to operate multiple field devices through one expansion unit.
Relay contacts can switch compatible AC and DC loads within the specified electrical limits, making the module useful for different industrial control circuits.
The two output common groups provide flexibility when organizing field wiring and separating groups of controlled loads.
The removable terminal arrangement supports practical wiring and maintenance. It can also simplify replacement when the wiring and terminal assignments are properly documented.
With dimensions of 90 × 84.6 × 27.3 mm and a weight of 0.145 kg, the module is suitable for space-conscious control cabinet layouts.
The specified isolation between output channels, output groups, and internal logic supports separation between control electronics and field circuits.
Local signaling assists technicians with output-state inspection and troubleshooting during commissioning and maintenance.
The TM2DRA16RT is a Modicon TM2 discrete output expansion module with 16 relay output channels. It is designed to operate compatible field devices through relay contacts.
It provides 16 relay output channels. Each channel has one normally open contact.
The maximum specified current is 2 A per channel. The maximum current per output common group is 8 A.
The documented switching ratings include up to 240 V AC and 30 V DC. The actual allowable current depends on the load type and electrical rating.
Yes. It is documented as an output expansion module for the Modicon M238 logic controller. The exact controller configuration should still be checked before installation.
Yes, provided the solenoid coil voltage and current are within the relay contact ratings. Appropriate protection should be used for inductive loads.
No. The TM2DRA16RT uses electromechanical relay outputs. It should not be confused with TM2 transistor output models.
It is designed for mounting on a symmetrical 35 mm DIN rail and uses one removable screw terminal block for field wiring.
The documented Schneider Electric 16-point relay output module matching the specifications in this article is TM2DRA16RT. The designation TM2DRA16DT should be checked against the physical product label before ordering or publishing. Do not assume the two designations identify the same product.
Confirm the complete catalog number, controller compatibility, output type, channel count, current limits, common-group arrangement, terminal block, and wiring configuration. Also test the replacement module before returning the machine to normal operation.
When purchasing the TM2DRA16RT, verify the complete model designation and confirm that the product is suitable for the target Modicon controller. This is especially important when a supplier listing uses a similar but unverified catalog number.
For replacement projects, compare the number of output points, relay contact ratings, common-group arrangement, and terminal configuration with the existing installation. Request clear photographs of the nameplate and terminal side when purchasing surplus or refurbished equipment.
During maintenance, inspect the removable terminal block, wiring, and relay switching performance. Loose connections, excessive load current, and repeated switching of unsuitable inductive loads can affect reliability.
Keep a record of the PLC output mapping and the field device connected to each channel. This documentation can reduce troubleshooting time and help prevent wiring errors during module replacement.
For critical applications, test each relay output under appropriate conditions before returning the system to service. Verify that external fuses, suppression components, and load ratings meet the electrical design requirements.
The Schneider Electric TM2DRA16RT Modicon Relay Output Module provides 16 normally open relay output channels for compatible industrial automation systems. With a maximum current rating of 2 A per channel and 8 A per common group, it supports the switching of a range of field devices within its specified electrical limits.
Its removable screw terminal block, DIN rail mounting, compact dimensions, and electrical isolation make it a practical I/O expansion component for compatible Modicon control systems.
For procurement and maintenance, accurate model identification is essential. The specifications in this article correspond to TM2DRA16RT, so the supplied TM2DRA16DT designation should be verified against the actual product label before publication or ordering.