Product Overview

The Ingersoll Rand 24900326 Air Filter Element is a standard air intake filtration component designed for compatible Ingersoll Rand industrial air compressors. Its primary function is to remove airborne dust and particulate contaminants from incoming air before the air reaches the compressor airend.

Clean intake air is essential for reliable compressor operation. Dust and other particles entering the compression chamber can contribute to internal wear, contamination, reduced operating efficiency, and increased maintenance requirements. The 24900326 filter element provides an important filtration stage within the compressor’s air intake system.

This filter is associated with larger industrial compressor packages, including compatible RS90–160i, E-Series 185–355 kW, and NG R-Series 315–355 kW equipment. Exact compatibility should always be confirmed using the compressor model, serial number, and parts documentation.

The part number 24900326 identifies the individual standard air filter element. The related number 47639433001 is associated with a one-year or 8,000-hour standard maintenance kit that includes the air filter and other scheduled service components. These two numbers should not be treated as interchangeable descriptions of a single filter element.

With an indicated outer diameter of 14.28 inches, the 24900326 is a large-format filter element intended for an industrial compressor intake assembly. Its selection and installation should follow the compressor manufacturer’s requirements for filtration, sealing, airflow, and service intervals.

Technical Specifications

Note: The 3 kg figure is the supplied shipping weight. Actual net weight may vary by packaging and supplier. Confirm the compressor serial number and manufacturer’s parts documentation before ordering.

Function and Working Principle

The 24900326 air filter element works as part of the compressor’s intake filtration system. Before air enters the compression stage, it passes through the filter medium, where airborne particles are captured.

1. Removal of Airborne Contaminants

Industrial environments can contain dust, dirt, fibers, and other airborne particles. If these contaminants enter a compressor, they may affect internal components and contribute to premature wear.

The air filter provides a barrier between the surrounding environment and the compressor’s internal air path. Its filtration medium captures particles while allowing air to pass through.

2. Protection of the Compressor Airend

The airend is a central component of a rotary screw compressor. It contains precision mechanical elements that require suitable operating conditions.

By reducing the amount of particulate matter entering the compressor, the 24900326 helps protect internal surfaces and maintain the cleanliness of the intake air.

A properly maintained filter can reduce contamination-related wear and support dependable compressor operation.

3. Maintaining Intake Airflow

An air filter must provide filtration without creating excessive airflow resistance. As dust accumulates in the filter medium, the pressure drop across the element can increase.

Higher intake restriction can affect compressor performance and increase the energy required to deliver the required air output. Monitoring the compressor’s intake restriction indicator, where fitted, helps maintenance personnel identify when filter replacement is necessary.

4. Supporting Stable Compressor Operation

The compressor depends on a consistent supply of suitable intake air. A correctly installed and maintained filter helps preserve the intended intake conditions.

The filter does not independently control compressor pressure, temperature, or output. Instead, it supports the overall machine by performing its designated air-cleaning function.

Role in Industrial Air Compressor Systems

The 24900326 is installed in the compressor intake assembly and works with other filtration and maintenance components.

Intake Filtration

The filter element removes airborne particles before the air reaches the compressor airend. This is particularly important in industrial plants where dust levels may vary throughout the day.

Pre-Filter Coordination

The standard air filter can be used with a compatible upstream pre-filter. The pre-filter captures larger particles before they reach the main filter element.

This arrangement can help reduce the contaminant load on the main filter and support the intended maintenance interval.

The standard pre-filter reference associated with this maintenance arrangement is 47571712001. Always confirm the correct pre-filter for the specific compressor configuration.

Maintenance Planning

The 24900326 is included in the maintenance planning of compatible compressor packages. Its service condition should be assessed using the machine’s maintenance schedule and intake restriction information.

The associated maintenance kit 47639433001 is identified as a one-year or 8,000-hour standard maintenance kit. The exact kit contents and service requirements should be verified against the compressor’s serial-number-specific documentation.

Industrial Applications

The Ingersoll Rand 24900326 is intended for compatible industrial compressor systems that require standard intake filtration.

1. Manufacturing Facilities

Manufacturing plants use compressed air for pneumatic tools, automation equipment, material handling, and production machinery.

A properly maintained intake filter helps protect the compressor supplying these systems from airborne contamination.

2. Industrial Processing Plants

Processing facilities often operate compressors continuously or for extended production shifts. Maintaining clean intake air is important for supporting stable compressor operation and planned maintenance.

3. Automotive and Assembly Operations

Compressed air is widely used in assembly lines, pneumatic tools, and automated production equipment. Intake filtration helps protect the compressor that supplies these applications.

4. Large Industrial Compressor Installations

The 24900326 is associated with selected large compressor packages, including compatible RS90–160i, E-Series, and NG R-Series equipment.

These systems may operate in demanding environments where regular inspection and filter replacement are important parts of preventive maintenance.

5. General Plant Utility Systems

Industrial compressors supply air to a wide range of plant utility applications. Maintaining the intake filtration system helps reduce the risk of airborne contamination entering the compressor.

Installation and System Integration

Correct installation is essential for filtration performance and compressor reliability.

1. Confirm the Correct Part Number

Before installation, verify that 24900326 is specified for the compressor model and serial number.

Do not rely solely on the outside diameter or visual appearance. Filter height, inside diameter, sealing arrangement, and housing configuration must also match.

2. Inspect the Filter Housing

Before fitting the replacement element, inspect the filter housing and sealing surfaces. Remove accumulated dust and debris without allowing contaminants to enter the downstream air path.

Check for damaged seals, distorted mounting surfaces, or other conditions that could permit unfiltered air to bypass the element.

3. Install the Element Correctly

Position the filter element according to the compressor manufacturer’s installation instructions. Ensure that the element is seated correctly and that the sealing surfaces are properly engaged.

Incorrect installation can allow unfiltered air to enter the compressor even when a new filter is used.

4. Inspect the Pre-Filter

Where the compressor uses a separate pre-filter, inspect and replace it according to the maintenance schedule.

A clogged or damaged pre-filter can reduce airflow or allow excessive contamination to reach the main element. The standard pre-filter reference associated with this maintenance arrangement is 47571712001, but compatibility should be checked against the machine documentation.

5. Check Intake Restriction

After installation, inspect the intake restriction indicator or monitoring arrangement if fitted. Confirm that the filter housing is properly closed and that airflow is not obstructed.

Record the replacement date and compressor operating hours for future maintenance planning.

6. Follow Safe Maintenance Procedures

Before opening the intake assembly, follow the compressor manufacturer’s shutdown and isolation instructions. Prevent loose dust and debris from entering the air intake during servicing.

Use suitable replacement parts and follow the specified installation procedure rather than modifying the filter or housing.

Compatible System Components

The 24900326 works as part of a larger compressor filtration and maintenance arrangement.

The listed parts are related maintenance components, not necessarily parts supplied with an individual 24900326 filter. Confirm the required configuration before ordering a complete service package.

Alternative Models and Replacement Considerations

Selecting an alternative filter requires more than matching the outer diameter. The replacement must also meet the required filtration performance and fit the original housing correctly.

The standard and high-dust filter elements should not be assumed to be interchangeable in every operating condition. The correct selection depends on the compressor configuration and the dust level at the installation site.

Before approving an alternative, check:

• Compressor model and serial number.
• Filter outer and inner diameters.
• Overall height and housing clearance.
• Sealing dimensions and gasket design.
• Filtration requirements.
• Airflow capacity and pressure-drop characteristics.
• Standard or high-dust application.
• Manufacturer-approved replacement references.

An aftermarket filter should only be selected when its fit, filtration performance, and suitability for the compressor have been established.

Key Advantages

Protection Against Airborne Contamination

The filter helps prevent dust and other airborne particles from entering the compressor intake system.

Support for Airend Reliability

Reducing particulate contamination helps protect the compressor’s internal components and supports reliable operation.

Designed for Compatible Ingersoll Rand Equipment

The 24900326 is identified as an Ingersoll Rand standard air filter element for specified industrial compressor packages.

Coordination with Pre-Filtration

When used with the correct pre-filter, the main element forms part of a staged intake filtration arrangement.

Support for Preventive Maintenance

Regular inspection and replacement help maintenance teams manage intake restriction and maintain the compressor’s filtration system.

Availability Through Maintenance Parts Channels

The part number can be used to identify the required filter element when sourcing replacement components for compatible compressor installations.

Technical FAQs

1. What is the Ingersoll Rand 24900326?

It is a standard air filter element designed for compatible Ingersoll Rand industrial air compressors. Its function is to remove airborne particles from intake air before the air reaches the compressor airend.

2. What is the outer diameter of the 24900326 air filter?

The supplied outer diameter is 14.28 inches, approximately 363 mm. Confirm the complete dimensional drawing before ordering a replacement.

3. What is the relationship between 24900326 and 47639433001?

24900326 is the individual air filter element. 47639433001 is an associated one-year or 8,000-hour standard maintenance kit that includes this filter and other maintenance components.

4. Which compressor models use the 24900326?

The part is associated with selected RS90–160i, E-Series 185–355 kW, and NG R-Series 315–355 kW compressor packages. Confirm compatibility using the exact compressor model and serial number.

5. How often should the filter be replaced?

A service reference for the standard element is six months or 4,000 operating hours. Actual replacement timing should follow the compressor manufacturer’s maintenance schedule and the intake restriction indicator, where fitted.

6. What is the difference between the standard filter and the high-dust filter?

The standard element is intended for normal dust conditions. The high-dust alternative, 24133019, is intended for compatible installations with heavier airborne dust exposure.

7. Does the 24900326 come with a pre-filter?

An individual 24900326 filter element should not be assumed to include a separate pre-filter. The standard pre-filter is identified separately as 47571712001. Check the product supply details before ordering.

8. What happens if the air filter becomes clogged?

A loaded filter increases intake restriction and may reduce the airflow available to the compressor. This can affect compressor performance and energy consumption. Inspect the restriction indicator and replace the element according to the service requirements.

9. Can an aftermarket filter replace the 24900326?

An aftermarket filter may be considered if it has been verified for the correct dimensions, sealing arrangement, airflow, and filtration performance. A similar outer diameter alone is not sufficient to establish compatibility.

10. What is the supplied shipping weight?

The supplied shipping weight is 3 kg. The actual net weight may differ depending on packaging and supplier measurement methods.

Procurement and Maintenance Recommendations

When purchasing the Ingersoll Rand 24900326 air filter, verify the complete part number and compressor compatibility before placing an order. The filter should be matched to the compressor’s original intake housing and specified filtration arrangement.

For procurement teams, it is important to distinguish the individual filter element from the associated maintenance kit. The 24900326 is the filter element, while 47639433001 identifies a related one-year / 8,000-hour standard maintenance kit. If a complete service package is required, confirm its contents rather than ordering the filter element alone.

For maintenance planning, inspect the filter condition and monitor intake restriction. Replace the element according to the compressor manufacturer’s service schedule or earlier when operating conditions require it. In dusty environments, more frequent inspection may be necessary.

During replacement, inspect the filter housing, seals, and pre-filter. Ensure that no dust or debris enters the clean side of the intake system. Record the maintenance date and operating hours to support future service planning.

For shipping and inventory management, use the supplied 3 kg shipping weight as a preliminary listing value and confirm the actual packaged weight with the supplier before arranging freight.

Conclusion

The Ingersoll Rand 24900326 Air Filter Element is a standard intake filtration component for selected industrial air compressor packages. With a supplied outer diameter of 14.28 inches, it is designed to remove airborne contaminants before they enter the compressor airend.

The filter supports compressor reliability by helping maintain clean intake air and reducing the risk of particulate contamination. For accurate procurement, it is important to distinguish the individual 24900326 filter from the associated 47639433001 maintenance kit and verify compatibility using the compressor’s model and serial number.

Correct installation, regular inspection, and timely replacement help maintain the intended performance of the compressor’s intake filtration system.