Product Overview

The Ingersoll Rand 24900458 Oil Filter Element is a replacement filtration component designed for compatible industrial air compressor lubrication systems. It is also commonly identified as a coolant filter element in Ingersoll Rand compressor parts catalogs.

In rotary screw air compressors, the lubricant plays several important roles. It lubricates moving components, helps remove heat generated during compression, and contributes to sealing within the compression process. During normal operation, the circulating fluid can collect dust, wear particles, oxidation products, and other contaminants.

The 24900458 filter element helps remove suspended particles from the circulating lubricant before it returns to critical compressor components. Maintaining suitable fluid cleanliness helps reduce contamination-related wear and supports reliable compressor operation.

This filter is associated with selected Ingersoll Rand RS-series compressors, including RS90ie, RS110ie, RS132i, RS132ie, RS160i, and RS160ie configurations. Exact compatibility should be confirmed using the compressor model and serial number because equipment configurations and maintenance requirements can vary.

The supplied product dimensions are 118 × 118 × 364 mm, and the listed weight is 2.54 kg. These specifications are useful for product identification, inventory management, and shipping preparation.

The additional number 47639433001 refers to a standard maintenance kit for selected RS132-160I and RS90-160IE compressor models. It should be treated as a maintenance-kit reference rather than the individual filter’s part number.

Technical Specifications

Note: Confirm the individual filter part number and maintenance-kit contents against the compressor’s serial-number-specific parts documentation. Dimensions and weight are the supplied listing values.

Function and Working Principle

The 24900458 filter element operates within the compressor’s lubricant circulation system. As fluid passes through the filter media, suspended contaminants are captured while filtered fluid continues through the system.

1. Contaminant Removal

Compressor lubricant can accumulate particles during operation. These may include dust entering the machine, wear debris from mechanical components, and deposits generated during extended operation.

The filter media captures contaminants as the fluid passes through it. This helps reduce the amount of unwanted material circulating through the compressor.

2. Support for Lubrication System Performance

Clean lubricant is important for the operation of compressor components that depend on continuous fluid circulation. Removing suspended contaminants helps support the intended lubrication conditions and reduces avoidable contamination-related wear.

3. Fluid Circulation

The filter must allow the compressor’s lubrication circuit to maintain the required fluid flow. As contaminants accumulate, the filter may become increasingly restricted.

Replacing the filter according to the compressor manufacturer’s maintenance requirements helps prevent excessive restriction and supports normal system operation.

4. Preventive Maintenance

The filter is a consumable maintenance component. Its replacement should be included in the compressor’s planned service schedule rather than postponed until a fault occurs.

The correct replacement interval depends on the compressor model, operating hours, lubricant condition, and environmental conditions.

Role in Industrial Air Compressor Systems

The 24900458 filter element contributes to the maintenance of compressor lubrication and cooling circuits.

Protection of Internal Components

Compressor components operate under mechanical and thermal loads. Contamination in circulating lubricant can contribute to abrasive wear and deposits.

By capturing suspended particles, the filter helps maintain the cleanliness of the fluid supplied to critical components.

Support for Thermal Management

In rotary screw compressor systems, lubricant also helps transfer heat generated during compression. Maintaining appropriate fluid circulation and cleanliness supports the intended thermal-management arrangement.

Compressor Reliability

A correctly maintained filtration system helps reduce contamination-related operating problems. The filter should be replaced together with other scheduled maintenance components when required by the compressor’s service plan.

Maintenance Planning

The 24900458 is associated with selected RS90–RS160 compressor maintenance applications. Maintenance teams should identify the required filter quantity and other service components using the correct compressor documentation.

Industrial Applications

1. Rotary Screw Air Compressors

The primary application is filtration in compatible Ingersoll Rand rotary screw air compressors. The filter helps remove contaminants from circulating lubricant during normal compressor operation.

2. Manufacturing Facilities

Manufacturing plants depend on compressed air for pneumatic equipment, production machinery, material handling, and automation systems. Maintaining compressor filtration helps support the availability of the compressed-air supply.

3. Industrial Automation Systems

Compressed air is frequently used in automated production lines for actuators, valves, and other pneumatic devices. Proper compressor maintenance contributes to the reliability of the supporting air supply.

4. Packaging and Processing Equipment

Packaging and processing facilities often require continuous compressed-air availability. Scheduled replacement of compressor filters helps reduce the risk of maintenance-related interruptions.

5. General Industrial Utility Systems

The filter may be used in suitable compressor installations supporting workshops, factories, and industrial utility systems. Compatibility must be confirmed for each compressor model.

Installation and Replacement Guidelines

Correct replacement procedures help prevent leakage, contamination, and unnecessary compressor downtime.

1. Confirm the Part Number

Before ordering or installing the filter, check the existing element label, compressor model, serial number, and parts documentation.

The individual filter is identified by part number 24900458. The number 47639433001 identifies a maintenance kit and should not be confused with the individual filter reference.

2. Shut Down and Isolate the Compressor

Stop the compressor and follow the manufacturer’s shutdown procedure. Isolate the electrical supply and allow the equipment to cool as required.

Follow all pressure-relief and lockout procedures before opening the lubrication circuit. Never remove a filter while the system is pressurized or at an unsafe temperature.

3. Remove the Existing Filter

Prepare a suitable container and absorbent materials to collect residual lubricant. Remove the existing filter using the recommended service procedure.

Inspect the filter housing and sealing surface. Check for damage, contamination, or old sealing material that could interfere with the replacement element.

4. Install the Replacement Filter

Compare the replacement filter with the removed component. Verify its dimensions, connection details, and sealing arrangement.

Install the new element according to the manufacturer’s instructions. Do not apply excessive tightening force, as this may damage the seal or filter housing.

5. Restart and Inspect

Restore the system according to the compressor’s commissioning procedure. Check for leakage and verify that the compressor operates normally.

Observe relevant pressure, temperature, and filter-condition indicators. If abnormal pressure drop, leakage, or operating alarms occur, stop the machine and investigate before returning it to normal service.

Compatible System Components

The 24900458 operates as part of a larger compressor system. The following components may be involved in the same equipment and maintenance arrangement.

These components are separate parts of the compressor system and are not necessarily included with the 24900458 filter element.

Alternative Models and Replacement Considerations

When replacing the 24900458, verify the exact OEM reference and compressor compatibility. Similar dimensions alone do not guarantee equivalent filtration performance.

Cross-reference information should be treated as a purchasing aid rather than automatic approval for substitution. Confirm filtration performance, flow capacity, sealing details, and compressor compatibility before installing an alternative product.

Key Advantages

Effective Lubricant Filtration

The filter captures suspended contaminants from the compressor’s circulating lubricant, helping maintain suitable fluid cleanliness.

Support for Compressor Component Protection

Reducing circulating contamination helps limit avoidable abrasive wear and supports the maintenance of critical compressor components.

Suitable for Preventive Maintenance

The replaceable element can be incorporated into planned compressor servicing, allowing maintenance teams to manage consumables and service intervals.

Application in Selected RS-Series Compressors

The 24900458 is listed for selected RS90ie, RS110ie, RS132i, RS132ie, RS160i, and RS160ie compressors. Final compatibility should be confirmed against the machine’s serial number.

Clear Spare-Part Identification

The individual part number and supplied dimensions help purchasing and maintenance teams identify the required filter and manage inventory.

Technical FAQs

1. What is the Ingersoll Rand 24900458?

It is an oil or coolant filter element used in selected Ingersoll Rand industrial air compressors. It removes contaminants from circulating lubricant to help maintain fluid cleanliness.

2. Which compressor models use the 24900458?

It is commonly listed for selected RS90ie, RS110ie, RS132i, RS132ie, RS160i, and RS160ie compressors. Confirm compatibility using the compressor serial number before ordering.

3. What are the dimensions of the 24900458?

The supplied dimensions are 118 × 118 × 364 mm. Confirm the actual product dimensions before using them for installation or packaging calculations.

4. What is the listed weight?

The supplied weight is 2.54 kg. The shipping weight may differ depending on packaging.

5. How often should the filter be replaced?

Some product references list a maintenance interval of approximately 4,000 operating hours or six months. The actual interval should follow the compressor manufacturer’s maintenance schedule and account for operating conditions.

6. What happens if the filter is not replaced?

Contaminants can continue accumulating in the filter media, increasing flow restriction. A restricted filter may affect lubricant circulation and contribute to abnormal compressor operation.

7. Is the 24900458 an air intake filter?

No. It is identified as an oil or coolant filter element. It serves the compressor’s fluid circuit rather than the primary air-intake filtration system.

8. What is the relationship between 24900458 and 47639433001?

24900458 is the individual filter reference. 47639433001 is a standard maintenance-kit number for selected RS132-160I and RS90-160IE compressor models. The kit may contain multiple maintenance components, including filter elements.

9. Can an aftermarket filter be used?

An aftermarket filter may be suitable if its filtration efficiency, flow capacity, dimensions, connection, sealing arrangement, and operating specifications meet the compressor manufacturer’s requirements. Confirm equivalence before installation.

10. What should be checked before purchasing?

Verify the compressor model, serial number, individual filter part number, dimensions, connection details, and required filtration specification. Also confirm whether the supplied item is genuine OEM or an aftermarket replacement.

Procurement and Maintenance Recommendations

When purchasing the Ingersoll Rand 24900458, begin by checking the compressor’s parts documentation and confirming the individual filter reference. If the product is being sourced as part of a maintenance kit, verify the complete kit number and its contents separately.

For procurement, request clear photographs of the filter, packaging, and part-number label. Confirm whether the item is genuine OEM or an aftermarket equivalent. If an alternative is offered, request technical information covering filtration performance, flow capacity, dimensions, and sealing compatibility.

During maintenance, record the installation date and compressor operating hours. Inspect the lubrication circuit for leakage and monitor relevant pressure and temperature indicators. Replace the filter according to the equipment manufacturer’s schedule and investigate abnormal operating conditions rather than relying only on a fixed replacement interval.

For facilities operating multiple compressors, maintaining an accurate spare-parts list can help reduce downtime. Keep individual filter numbers separate from maintenance-kit numbers to avoid ordering errors.

Conclusion

The Ingersoll Rand 24900458 Oil Filter Element is a replacement filtration component designed for compatible industrial air compressor systems. By removing contaminants from circulating lubricant, it helps support fluid cleanliness and the protection of internal compressor components.

With supplied dimensions of 118 × 118 × 364 mm and a listed weight of 2.54 kg, the element can be identified for procurement and inventory management. It is associated with selected RS90ie, RS110ie, RS132i, RS132ie, RS160i, and RS160ie compressor models.

For accurate ordering, distinguish the individual filter number 24900458 from the 47639433001 maintenance-kit reference, and confirm the required parts against the compressor’s model and serial number.