Product Overview

The Ingersoll Rand 47553887001 24436321 Hose is a replacement hose identified for use in compatible Ingersoll Rand compressor assemblies. In an industrial compressor, hoses connect components that need to exchange air, lubricant, coolant, or other operating fluids. Their routing and connection arrangement depend on the specific circuit, so selecting the correct replacement requires more than matching the hose length.

During compressor operation, hoses are exposed to pressure fluctuations, temperature changes, vibration, and movement transmitted through the machine structure. A hose that develops cracks, deteriorated connections, abrasion, or leakage can affect the operation of the associated circuit and may lead to unplanned maintenance. Replacing a damaged hose with the correct configuration helps restore the intended connection between the relevant components.

The part number 24436321 identifies the hose, while 47553887001 is retained as supplied in the product designation. The specified hose length is 26 inches. Before ordering a replacement, maintenance personnel should confirm the compressor model, connection type, routing path, and required pressure rating. The exact circuit served by this hose should be established from the applicable equipment configuration rather than inferred from the hose designation alone.

For service teams maintaining several compressor models, accurate part identification is particularly important. Hoses with similar lengths may have different end fittings, internal diameters, reinforcement structures, or material specifications. These differences can affect installation clearance and suitability for the operating medium.

Technical Specifications

Product Features

• Identifiable replacement part: The 24436321 component number helps distinguish this hose during spare-parts selection and maintenance planning.
• Specified hose length: The 26-inch length provides a reference for checking the required routing arrangement.
• Compressor service application: Intended for the compatible equipment configuration associated with the part number.
• Connection-dependent selection: Correct fit depends on the end fittings and mating ports used in the original assembly.
• Routing considerations: The installed hose must follow the intended path without excessive bending, twisting, or contact with moving components.
• Maintenance replacement: Allows a damaged or deteriorated hose to be replaced without treating the entire connected assembly as a single component.
• Assembly-specific identification: Retaining both supplied part numbers helps reduce confusion between hoses used in different compressor configurations.

Working Principle

A hose provides a flexible passage between two connection points. Depending on its assigned circuit, it carries the designated medium from one component to another while accommodating the routing requirements of the compressor assembly.

In a compressor system, the actual function of a hose depends on its position. A hose in an oil circuit may carry lubricant between components, whereas one in an air circuit may convey compressed air or control air. The available identification for 24436321 establishes it as a hose but does not independently confirm which of these functions applies to this specific installation.

A typical hose connection follows this arrangement:

Source Component → Hose Connection → Hose 24436321 → Mating Connection → Receiving Component

When the compressor operates, the connected circuit supplies the pressure or flow required by its associated components. The hose must maintain a suitable connection while accommodating the movement and vibration expected at the installation point. The end fittings provide the mechanical interface, while the hose body forms the passage between them.

For example, during a compressor overhaul, a technician may remove a hose to gain access to an adjacent component. Before reinstalling or replacing it, the technician should identify both connection points, inspect the fittings, and check the original routing. A hose that is twisted or forced into an incorrect position can experience unnecessary mechanical stress even if its nominal length appears correct.

The hose itself does not regulate flow or pressure unless a specific assembly incorporates additional functional elements. Its suitability depends on the intended medium, operating pressure, temperature range, connection design, and installation conditions.

Role in a Compressor System

The 24436321 hose forms part of the physical connection between two components in the applicable compressor assembly. Its position within the system determines the medium it carries and the operating conditions it must withstand.

Source Component → Hose Assembly → Receiving Component → Associated Compressor Circuit

The exact circuit and connected components should be verified against the relevant compressor parts breakdown before replacement.

Industrial Applications

The specific application of 24436321 depends on the compressor model and its original installation. Its circuit, fluid compatibility, and pressure rating should not be assumed from the product name alone.

Installation and Maintenance

1. Verify the part number: Confirm that 47553887001 and 24436321 match the hose specified for the compressor being serviced.
2. Identify the circuit: Determine which components the original hose connects and establish whether it carries air, lubricant, coolant, or another medium.
3. Isolate the equipment: Shut down the compressor, disconnect the required energy sources, and release stored pressure according to the service procedure.
4. Inspect the original routing: Record the hose path and connection orientation before removing the existing assembly.
5. Check the end fittings: Examine the mating connections for damaged threads, worn sealing surfaces, corrosion, or contamination.
6. Inspect the replacement hose: Look for cuts, crushing, deformation, or damage caused by handling and storage.
7. Confirm connection compatibility: Verify that the replacement fittings match the corresponding ports and sealing arrangements.
8. Avoid excessive bending: Route the hose within the manufacturer’s specified bend radius once that requirement has been established.
9. Prevent twisting: Align the fittings before tightening so that the hose body is not subjected to torsional stress.
10. Secure the connections: Follow the applicable assembly procedure and use the specified tightening method for the fittings.
11. Check for interference and leakage: Confirm that the hose does not rub against moving parts or hot surfaces, then inspect the connections under approved operating or test conditions.
12. Record the replacement: Document the part number, installation location, inspection findings, and any abnormalities for future maintenance.

If the replacement hose does not fit naturally into the original routing path, do not force it into position. Recheck the part number, fitting orientation, and compressor configuration before returning the equipment to service.

Compatible System Components

The 24436321 hose must be matched to the components at its two connection points. The following component categories describe the surrounding installation; the exact mating parts depend on the compressor configuration.

Recommended Related Models

Key Advantages

• Provides a clearly identified replacement hose for compatible compressor equipment.
• Uses the specified 26-inch hose length as a reference during part selection.
• Supports restoration of the original connection after hose deterioration or damage.
• Helps maintenance teams identify the correct component through its part number.
• Allows the existing hose routing and connection arrangement to be checked during replacement.

Technical FAQs

How can I confirm whether 24436321 is the correct hose for my compressor?

Check the complete part number against the parts breakdown for the exact compressor model. Also verify the connection fittings, circuit location, routing, and operating requirements. Matching the hose length alone does not establish compatibility.

Does the 26-inch hose length include the end fittings?

The supplied specification identifies the hose length as 26 inches but does not establish the measurement convention. Confirm whether the stated length refers to the overall assembly or the hose section before using it for precise installation planning.

Can this hose be used for both air and oil circuits?

Not without confirming its material and pressure specifications. Air, oil, coolant, and other media can impose different requirements on the hose body and fittings. Use the hose only in the circuit for which the specific assembly is approved.

What should be checked if a replacement hose leaks after installation?

Inspect the fittings, sealing surfaces, connection alignment, and hose condition. Also verify that the hose is not twisted, excessively bent, or subjected to pressure and temperature conditions outside its specified limits.