ProductPRODUCT
Featured products
Contact Us
- Foxboro
- FBM203 P0916AE
- Compression Termination Assembly
- USA
- 125 × 76 × 80 mm
- 0.181 kg
- Xiamen, China
- New & In Stock
- T/T, PayPal, Western Union
- 1 Year
- 1-3 Working Days
- DHL, UPS, TNT, FedEx and EMS.
- 24-Hour Service
- COO
- 3
Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |
Product Overview
The Foxboro FBM203 P0916AE is an I/A Series 200 Compression Termination Assembly used to terminate and organize field wiring associated with compatible Foxboro FBM input modules. It sits on the field-wiring side of the I/O installation and provides the connection point between incoming instrument wiring and the associated FBM signal interface.
In a typical temperature measurement application, RTDs are installed on vessels, heat exchangers, pumps, compressors, or process piping. The field cables from those sensors need to be brought into the control system in an organized and serviceable way. The P0916AE termination assembly provides that interface rather than performing the temperature measurement itself.
This distinction is important when replacing an FBM installation. The FBM203 P0916AE is a termination component, while the associated FBM module performs the actual signal acquisition and processing. A termination assembly may therefore remain physically intact while the connected I/O module is replaced, or it may need replacement separately when the field connection hardware has been damaged or modified.
The compression-style termination arrangement is particularly useful in installations where multiple instrument wires have to be landed in a compact I/O cabinet. It gives maintenance personnel a defined termination point and helps keep field wiring separated from the electronic I/O module.
For an existing Foxboro I/A Series 200 system, the complete signal path should be checked before replacement. The termination assembly, FBM module, termination cable, baseplate, field wiring, and configured I/O channels all need to match the installed architecture.
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | Foxboro |
| Model | FBM203 P0916AE |
| Product Family | I/A Series 200 |
| Product Type | Compression Termination Assembly |
| Associated I/O Family | FBM203 RTD Input Module |
| Termination Type | Compression |
| Application | Field wiring termination for compatible FBM I/O |
| Installation | I/A Series 200 I/O installation |
| Interface Function | Connects field wiring to the associated I/O signal path |
| Dimensions | 125 × 76 × 80 mm |
| Weight | 0.181 kg |
Product Features
- I/A Series 200 compression termination assembly
- Model P0916AE
- Associated with compatible Foxboro FBM203 installations
- Provides a dedicated field-wiring termination point
- Compression-style field connection arrangement
- Separates field wiring from the main electronic I/O module
- Supports organized cabinet wiring
- Suitable for process instrumentation installations
- Used as part of the FBM field signal connection path
- Can simplify maintenance access to field connections
- Intended for integration with the appropriate Foxboro I/A Series 200 hardware
Working Principle
The FBM203 P0916AE does not convert an RTD signal into a process value by itself. Its job is to establish the physical connection between the field instrument wiring and the corresponding Foxboro I/O signal path.
Field Sensor Wiring → P0916AE Termination Assembly → Termination Cable / I/O Interface → FBM203 → I/A Series 200 DCS
For example, an RTD installed on a process vessel may have a multi-core cable running from the field junction box to the control cabinet. The individual conductors are landed at the termination assembly, where the field wiring is organized into the appropriate signal paths.
The associated FBM203 module then handles the actual RTD measurement. The termination assembly therefore acts as the physical wiring interface rather than the measurement electronics.
This arrangement is useful during troubleshooting because technicians can inspect the field termination separately from the electronic I/O module. If one temperature point is incorrect, the investigation can start at the sensor and termination connection before moving toward the FBM and control-system configuration.
The exact wiring arrangement depends on the connected FBM module and field instrument type. For an FBM203 RTD installation, the sensor wiring configuration should be checked against the installed module and system documentation before reconnecting the termination assembly.
Role in a Foxboro I/A Series 200 DCS Control Architecture
The FBM203 P0916AE occupies the field connection point between the instrument wiring and the Foxboro I/O subsystem.
Field RTDs / Instruments → P0916AE → FBM Interface → I/A Series 200 Fieldbus → DCS
| System Element | Function |
|---|---|
| P0916AE | Provides the field wiring termination interface |
| FBM203 | Acquires and processes compatible RTD input signals |
| RTD Sensor | Measures process temperature through resistance change |
| Termination Cable | Carries the terminated field signals to the applicable I/O interface |
| I/O Baseplate | Provides the required mounting and electrical interface |
| Fieldbus | Transfers I/O information toward the control system |
| Control Processor | Processes instrument data within the DCS |
| Foxboro DCS | Displays, alarms, calculates, and uses the acquired process values |
| Field Junction Box | Collects and routes instrument cables from the process area |
The P0916AE should therefore be considered part of the complete I/O connection arrangement rather than an independent signal-processing module.
Industrial Applications
| Application | Typical Use |
|---|---|
| Chemical Processing | Terminating temperature and process instrument wiring |
| Oil and Gas | Connecting field instrumentation to distributed I/O cabinets |
| Refining | Organizing instrument wiring associated with process units |
| Heat Exchanger Systems | Providing termination points for temperature measurement circuits |
| Pumping Stations | Connecting equipment instrumentation to the DCS I/O system |
| Compressor Systems | Routing temperature and equipment monitoring signals |
| Power Utilities | Organizing field instrument connections in control cabinets |
| Water Treatment | Terminating distributed process instrumentation |
| Manufacturing Plants | Connecting field sensors with centralized control systems |
| Process Control Cabinets | Providing structured field wiring connections for FBM installations |
Installation and Maintenance
- Confirm that the replacement component is the correct P0916AE termination assembly before removing the existing unit.
- Verify that the installed I/O architecture is compatible with the termination assembly.
- Identify each field cable and instrument tag before disconnecting existing wiring.
- Record the terminal assignment of each instrument before moving conductors.
- Inspect field conductors for damaged insulation, loose strands, corrosion, or incorrect termination.
- Check the compression connection points for secure mechanical contact.
- Verify the termination cable and connector arrangement between the termination assembly and associated FBM hardware.
- Confirm that the connected FBM module matches the intended field signal type.
- After installation, perform continuity checks on critical field circuits before applying system power.
- Compare the DCS channel status with the expected condition of the connected field instruments.
- If a single signal is abnormal, check the field instrument, wiring, termination point, and associated channel before replacing the FBM module.
- Record the final terminal-to-channel mapping after maintenance so future technicians can identify the correct field connection without tracing the complete cable route.
For troubleshooting, it is useful to divide the signal path into three areas: field instrument, termination assembly, and I/O module. This helps determine whether the problem is caused by the instrument circuit or the electronic I/O hardware.
Related Components
| Component | Function |
|---|---|
| Foxboro FBM203 | RTD input module associated with compatible temperature measurement applications |
| P0916AE | Compression termination assembly for the applicable I/A Series 200 I/O arrangement |
| I/A Series 200 Baseplate | Provides the mounting and electrical interface for the I/O installation |
| Termination Cable | Connects the termination assembly with the applicable FBM interface |
| RTD Sensor | Provides resistance-based temperature measurement |
| Field Junction Box | Collects field instrument wiring before routing it to the control cabinet |
| Foxboro Fieldbus Interface | Transfers I/O data toward the DCS |
| Control Processor | Processes field measurement data |
| I/A Series 200 DCS | Supervises and uses the acquired process information |
Recommended Related Models
| Model / Product Family | Product Type | Typical Application |
|---|---|---|
| Foxboro FBM203 | RTD Input Module | Eight-channel RTD temperature measurement |
| Foxboro FBM203 RH914SV | RTD Input Module | RTD signal acquisition in an I/A Series 200 installation |
| Foxboro FBM202 | Thermocouple / mV Input Module | Temperature measurement using thermocouple or millivolt signals |
| Foxboro FBM201 | Analog Input Module | Current-input process instrumentation |
| Foxboro I/A Series 200 | Distributed I/O Platform | Process field I/O and instrumentation |
| Foxboro Termination Assemblies | I/O Termination Hardware | Field wiring connection for compatible FBM installations |
Key Advantages
- Provides a dedicated termination point for field instrumentation.
- Keeps field wiring organized within the I/A Series 200 cabinet.
- Separates field connections from the electronic I/O module.
- Supports structured troubleshooting of individual signal paths.
- Suitable for installations using compatible FBM203 RTD input hardware.
- Helps simplify field wiring maintenance and replacement work.
- Forms part of the complete Foxboro distributed I/O connection architecture.
Technical FAQs
Is the FBM203 P0916AE an RTD input module?
No. The P0916AE is a Compression Termination Assembly. The associated FBM203 module performs the RTD signal acquisition, while the P0916AE provides the field wiring termination interface.
What is the relationship between the P0916AE and FBM203?
The P0916AE is part of the field connection arrangement used with compatible FBM hardware. In an RTD application, field sensor wiring reaches the termination assembly before the signals are routed to the FBM203 input module.
Can the termination assembly be replaced without replacing the FBM203?
Potentially, yes. The termination assembly and FBM module are separate hardware components. If the electronic FBM203 is operating correctly but the field termination hardware is damaged, the termination component may be replaced separately, provided the replacement matches the installed I/O configuration.
What should be checked when an RTD signal is lost at the DCS?
Start at the field side and work toward the controller: check the RTD, cable continuity, termination point, termination cable, FBM input channel, and DCS channel configuration. If several channels fail together, inspect common termination or I/O connections before assuming that multiple sensors have failed.