ProductPRODUCT
Featured products
Contact Us
- Emerson
- SE4031S2T2B1
- Redundant Discrete Input Card
- USA
- 131 × 41.8 × 130.8 mm
- 0.45 kg
- Xiamen, China
- New & In Stock
- T/T, PayPal, Western Union
- 1 Year
- 1-3 Working Days
- DHL, UPS, TNT, FedEx and EMS.
- 24-Hour Service
- COO
- 46
Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |
Product Overview
The Emerson SE4031S2T2B1 DeltaV S-series Redundant Discrete Input Card is an 8-channel discrete input solution for DeltaV S-series Traditional I/O. It uses two discrete input cards as a redundant pair, allowing the same field input information to be handled through a redundant I/O arrangement.
The card is intended for 24 VDC dry-contact discrete inputs commonly used for equipment status, switch indications, interlocks, permissives, and other on/off signals in process automation systems. Instead of treating the two cards as unrelated I/O points, the DeltaV architecture manages them as a redundant input pair.
A typical installation uses the SE4031S2T2B1 with the appropriate redundant 8-channel terminal block. The field contacts are wired to the terminal block, while the redundant card pair processes the corresponding input states for the DeltaV control system.
Redundant discrete input architecture is useful where loss of a single I/O card should not immediately remove the availability of important status or interlock signals. During maintenance, the redundant arrangement also allows engineers to identify and replace a failed card while maintaining the intended I/O architecture.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Type | Redundant Discrete Input Card |
| Product Series | DeltaV S-series |
| Model | SE4031S2T2B1 |
| Number of Input Channels | 8 |
| Input Type | 24 VDC Dry Contact |
| Configuration | Redundant |
| Card Arrangement | 2 × Discrete Input Cards |
| Terminal Block | Redundant 8-Channel Terminal Block |
| Application | Discrete Status and Process Input Monitoring |
| Dimensions | 131 × 41.8 × 130.8 mm |
| Weight | 0.45 kg |
Product Features
- 8-channel redundant discrete input configuration for DeltaV S-series systems.
- Uses a pair of discrete input cards to maintain redundant input availability.
- Supports 24 VDC dry-contact field signals.
- Suitable for equipment status, interlock, permissive, and switch-position monitoring.
- Uses a dedicated redundant terminal block for field termination.
- Supports DeltaV S-series Traditional I/O architecture.
- Redundant cards are installed as an associated pair rather than as independent simplex inputs.
- Suitable for process control applications where discrete input availability is important.
- Allows maintenance personnel to diagnose individual card conditions within the redundant arrangement.
Working Principle
The SE4031S2T2B1 receives discrete states from field dry contacts and presents those states to the DeltaV control system through a redundant I/O arrangement.
Field Dry Contacts → Redundant Terminal Block → SE4031S2T2B1 Card Pair → DeltaV I/O System → Controller / Control Logic
The signal path operates as follows:
- A field switch, relay contact, or equipment status contact changes state according to the operating condition.
- The 24 VDC discrete input circuit detects the corresponding contact state.
- The redundant terminal block distributes the field connections to the redundant input card pair.
- The two input cards provide the redundant processing path for the associated channels.
- DeltaV monitors the input information and uses the resulting status in control logic, alarms, interlocks, or operator displays.
- If one card develops a fault, the redundant architecture helps maintain the intended input availability through the remaining card.
The redundancy applies to the I/O architecture rather than turning one physical input point into two unrelated process signals. Correct card pairing, terminal-block selection, and slot arrangement are therefore important during installation.
Role in a DeltaV S-series Control Architecture
The SE4031S2T2B1 operates at the discrete field-input layer of a DeltaV S-series Traditional I/O architecture, where redundant status signals are passed into the control system.
Field Contacts → Redundant Terminal Block → SE4031S2T2B1 → DeltaV Controller → Control Logic / Alarm / HMI
| System Element | Typical Function |
|---|---|
| Field Dry Contact | Provides equipment or process on/off status |
| Redundant Terminal Block | Terminates and distributes field wiring to the redundant input cards |
| SE4031S2T2B1 | Provides redundant acquisition of 8 discrete input channels |
| S-series I/O Carrier | Provides the physical mounting and I/O connection infrastructure |
| DeltaV Controller | Processes input states and executes control logic |
| Engineering Station | Configures I/O and control-system parameters |
| Operator Station | Displays equipment status and alarms |
| Control Logic | Uses discrete inputs for sequencing, permissives, and interlocks |
Industrial Applications
| Application | Typical Use |
|---|---|
| Process Plant Control | Monitoring equipment running, stopped, or fault states |
| Pump Stations | Pump status, auxiliary contacts, and local switch indications |
| Compressor Systems | Equipment permissives, shutdown contacts, and operating status |
| Chemical Processing | Valve position, interlock, and equipment status signals |
| Oil and Gas | Monitoring field switches and critical equipment contacts |
| Power and Utility Systems | Breaker, motor, and auxiliary equipment status |
| Water Treatment | Pump, valve, and treatment-equipment status monitoring |
| Manufacturing | Machine interlocks, limit switches, and equipment feedback |
| Distributed Process Units | Redundant acquisition of important discrete process conditions |
Installation and Maintenance
- Confirm that the SE4031S2T2B1 is being installed as a redundant input configuration rather than as a simplex card.
- Use the appropriate redundant 8-channel terminal block for the card pair.
- Verify that both cards in the redundant pair are the correct model and hardware type.
- Install the redundant cards in the required paired slot arrangement.
- Confirm that the lower-numbered slot is the odd slot and the adjacent higher-numbered slot is the even slot.
- Check the 24 VDC field supply and dry-contact wiring before commissioning.
- Verify each field contact against the corresponding channel assignment.
- Make sure terminal connections are secure and correctly identified.
- Confirm that DeltaV recognizes the redundant card arrangement correctly.
- Check the input status from the field device through the DeltaV diagnostic and monitoring functions.
- If one card reports a fault, investigate the affected card, carrier connection, terminal block, and field wiring before changing the complete redundant pair.
- During maintenance, verify that the remaining redundant path continues to report the expected input condition.
- After card replacement, confirm redundancy status and perform the required system validation before returning the point to normal operation.
A redundant input problem should be diagnosed at several levels. A fault indication on one card does not automatically mean that the field contact or terminal block has failed. Checking the individual card, redundant pair configuration, terminal block, carrier position, and field circuit helps isolate the actual cause.
Related Components
| Component | Function |
|---|---|
| DeltaV S-series Redundant Terminal Block | Provides field termination for the redundant input card pair |
| S-series I/O Carrier | Provides physical mounting and I/O connectivity |
| 24 VDC Field Power Supply | Supplies the discrete input circuit |
| Dry Contacts | Provide equipment and process status signals |
| S-series Controller | Processes the acquired discrete input states |
| DeltaV Engineering Station | Provides system configuration and diagnostics |
| Operator Station | Displays status, alarms, and equipment conditions |
| Interlock Logic | Uses discrete status inputs for permissive and shutdown functions |
| Pepperl+Fuchs IS Barriers | Used in applicable hazardous-area signal interfaces |
| DeltaV S-series Traditional I/O | Provides the overall I/O subsystem architecture |
Recommended Related Models
| Model / Series | Product Type | Typical Application |
|---|---|---|
| SE4031S2T2B1 | DeltaV S-series Redundant DI Card | 8-channel 24 VDC dry-contact redundant input |
| SE4001S2T2B1 | DeltaV S-series DI Card | 8-channel 24 VDC dry-contact simplex input |
| SE4001S2T2B2 | DeltaV S-series DI Card | 8-channel 24 VDC dry-contact input with fused terminal block |
| SE4001S2T2B3 | DeltaV S-series DI Card | 8-channel 24 VDC dry-contact input with mass terminal block |
| SE4001S2T1B1 | DeltaV S-series Isolated DI Card | 8-channel 24 VDC isolated input |
| SE4031S2T2B7 | DeltaV S-series Redundant DI Card | 32-channel 24 VDC dry-contact redundant input |
| SE4081S2T2B7 | DeltaV S-series Redundant DI Card | High-density redundant discrete input |
| DeltaV S-series I/O | Traditional I/O Platform | Process automation and distributed control |
Key Advantages
- Redundant 8-channel architecture improves availability of important discrete status signals.
- Supports 24 VDC dry-contact field devices commonly used in process automation.
- Integrates directly with DeltaV S-series Traditional I/O.
- Uses a dedicated redundant terminal-block arrangement for organized field wiring.
- Suitable for interlocks, permissives, equipment status, and process monitoring.
- Allows maintenance teams to diagnose the individual cards within the redundant configuration.
- Helps reduce the effect of a single I/O card failure on critical discrete input monitoring.
Technical FAQs
How is the SE4031S2T2B1 different from a standard SE4001S2T2B1?
The SE4031S2T2B1 is a redundant discrete input configuration using two associated 8-channel cards, while the SE4001S2T2B1 is a simplex discrete input card. The redundant version is intended for applications where continued I/O availability is more important than a single-card configuration.
Does SE4031S2T2B1 provide 16 independent input channels?
No. The redundant configuration should not be treated as 16 unrelated process inputs. The two cards form a redundant arrangement for the associated 8-channel input set.
How should the redundant cards be installed in the DeltaV S-series carrier?
The two cards must be installed as a valid adjacent redundant pair, with the lower-numbered slot being the odd slot and the next higher slot being the even slot. The appropriate redundant terminal block must also be used for the configuration.
What should be checked if one card in the redundant pair reports a fault?
Check the affected card’s status, carrier connection, terminal block, field wiring, and redundant configuration. If the other card continues to operate normally, the field circuit itself may still be healthy, so the failed card and its local connections should be investigated before disturbing the complete I/O path.