Technical Product Dossier
1. Product Overview
The model 330851-04-002-010-00-05 is a precision-engineered signal transmission assembly used in industrial machinery condition monitoring systems. It functions as an interconnect cable within a proximity measurement chain, enabling stable transfer of high-frequency vibration and displacement signals from the sensing probe to the monitoring instrumentation.
This component is designed for continuous operation in demanding rotating machinery environments where signal integrity, electromagnetic shielding, and mechanical durability are critical for equipment protection and predictive maintenance.
It is commonly installed in high-speed turbomachinery such as turbines, compressors, generators, and large rotating drive systems where precise shaft motion monitoring is required.
2. System Classification
This model belongs to the 3300 XL proximity measurement system family, a widely adopted architecture for non-contact vibration and displacement monitoring.
A complete system typically includes:
- Proximity probe
- Extension / interconnect cable
- Signal conditioning module (monitoring interface)
The referenced model serves as the interconnect segment, ensuring stable communication between sensing and processing units without signal distortion.
3. Product Introduction
The 330851-04-002-010-00-05 is designed to ensure reliable signal continuity in environments exposed to vibration, heat, oil mist, and electromagnetic interference.
Its construction focuses on minimizing signal attenuation while maintaining mechanical flexibility for installation in compact machinery layouts.
It plays a critical role in maintaining measurement accuracy in systems that require continuous monitoring of shaft position and vibration behavior.
4. Technical Parameters
Specification Table
| Parameter |
Specification |
| Model |
330851-04-002-010-00-05 |
| Product Type |
Proximity system interconnect / extension cable |
| System Family |
3300 XL proximity measurement system |
| Cable Length |
1.0 m (010 configuration segment within system coding) |
| Signal Type |
Eddy current proximity signal transmission |
| Shielding |
Multi-layer EMI/RFI shielding |
| Conductor Type |
Coaxial precision signal conductor |
| Insulation Material |
High-grade fluoropolymer composite |
| Outer Diameter |
5 – 6 mm |
| Minimum Bend Radius |
~50 mm |
| Operating Temperature |
-40°C to +120°C |
| Environmental Resistance |
Oil, vibration, moisture, chemical exposure resistant |
| Connector Type |
Standardized industrial coaxial connectors |
| Installation Style |
Fixed routing, cable tray or conduit compatible |
| Weight |
0.10 – 0.25 kg |
| Packaging Dimensions |
Approx. 1000 mm length, coil diameter ~80–100 mm |
5. Product Applications
This model is widely used in industrial rotating machinery where continuous monitoring of vibration and shaft displacement is required.
Typical application areas include:
- Steam turbine rotor vibration monitoring
- Gas turbine shaft displacement measurement
- Centrifugal compressor stability tracking
- Pump bearing condition monitoring
- Generator rotor eccentricity detection
- Industrial gearbox vibration analysis
It is particularly valuable in predictive maintenance systems designed to detect early mechanical degradation.
6. Product Advantages
High Signal Fidelity
Ensures low-noise transmission of measurement signals even in high-interference environments.
Compact Installation Capability
Short-length configuration allows use in tight mechanical assemblies and confined routing spaces.
Mechanical Robustness
Designed to resist continuous vibration, thermal cycling, and mechanical stress.
Long-Term Stability
Maintains consistent electrical performance over extended operational life cycles.
System Compatibility
Fully compatible with standardized proximity monitoring architectures used in rotating machinery systems.
7. Related Models (Same Series or Equivalent Variants)
| Model |
Description |
Cable Length |
Weight (kg) |
Key Feature |
| 330851-04-002-020-00-05 |
Short extension cable |
2.0 m |
0.15 – 0.30 |
Flexible mid-range routing |
| 330851-04-002-030-00-05 |
Standard extension cable |
3.0 m |
0.20 – 0.40 |
General industrial use |
| 330851-04-002-040-00-05 |
Medium-length cable |
4.0 m |
0.25 – 0.50 |
Balanced installation coverage |
| 330851-04-002-050-00-05 |
Long extension cable |
5.0 m |
0.30 – 0.60 |
Extended distance transmission |
| 330850-04-002-010-00-05 |
Probe-side cable variant |
1.0 m |
0.10 – 0.20 |
Direct probe integration |
8. Popular Models from Same Manufacturer Ecosystem
| Model |
Product Type |
Application |
Weight (kg) |
Key Feature |
| 3500/22M |
Vibration monitoring module |
Machinery protection system |
1.2 – 1.8 |
Multi-channel vibration analysis |
| 3500/42M |
Position monitoring module |
Axial displacement control |
1.0 – 1.6 |
High-precision shaft position tracking |
| 3500/15 Power Supply |
System power module |
Rack power distribution |
2.0 – 3.5 |
Stable industrial power supply |
| Proximitor Signal Module |
Signal conditioning unit |
Sensor signal conversion |
0.3 – 0.7 |
Stable eddy current processing |
| 8mm Proximity Probe |
Non-contact sensor |
Shaft vibration measurement |
0.05 – 0.15 |
High-resolution displacement sensing |
9. Functional Role in Industrial Systems
This component ensures uninterrupted transmission of high-frequency displacement signals in critical machinery monitoring loops.
It supports early detection of mechanical abnormalities such as:
- Rotor imbalance
- Shaft misalignment
- Bearing wear progression
- Mechanical looseness
- Structural resonance conditions
By maintaining signal integrity, it directly contributes to equipment reliability, operational safety, and reduction of unplanned downtime.
