Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |

The Siemens 6AG1322-1FH00-7AA0 Digital Output Module is a SIPLUS S7-300 automation component designed to provide reliable digital signal switching between a programmable logic controller and connected industrial field devices. It belongs to the SIMATIC S7-300 SM 322 family and is based on the standard module 6ES7322-1FH00-0AA0.
This module provides 16 isolated digital outputs for controlling compatible AC loads. With a rated output current of 1 A per channel, it can be used to switch suitable actuators and electrical devices in industrial automation systems. Typical applications include control of contactors, indicator lamps, interface relays, and other compatible AC-operated equipment.
A key feature of this SIPLUS version is its conformal coating, which provides additional protection for electronic assemblies in challenging industrial environments. The specified operating temperature range is -40 to +70°C, making the module suitable for installations where temperature conditions may extend beyond those typically encountered in standard control cabinets.
The 6AG1322-1FH00-7AA0 is designed for integration into SIMATIC S7-300 PLC systems. It receives digital control information through the S7-300 backplane bus and switches the corresponding output channels according to the PLC program.
For system engineers and maintenance teams, this module provides a practical way to connect PLC logic with AC-operated field equipment. Before installation, however, it is important to verify the output voltage, load current, wiring arrangement, and compatibility with the existing S7-300 configuration.
| Parameter | Specification |
|---|---|
| Brand | Siemens |
| Product Series | SIPLUS S7-300 |
| Module Family | SM 322 |
| Model | 6AG1322-1FH00-7AA0 |
| Base Standard Model | 6ES7322-1FH00-0AA0 |
| Product Type | Digital Output Module |
| Number of Digital Outputs | 16 |
| Output Type | Isolated digital AC outputs |
| Rated Load Voltage | 120/230 V AC |
| Permissible Load Voltage Range | 79–264 V AC |
| Rated Output Current | 1 A per output |
| Maximum Output Current at 0–40°C | 1 A |
| Maximum Output Current at 40–60°C | 0.5 A |
| Minimum Load Current | 10 mA |
| Backplane Bus Supply | 5 V DC |
| Maximum Backplane Bus Current | 200 mA |
| Typical Power Dissipation | 8.6 W |
| Connection Type | 1 × 20-pole connector |
| Short-Circuit Protection | Fused by output group |
| Conformal Coating | Included |
| Operating Temperature | -40 to +70°C |
| Dimensions Provided | 40 × 125 × 120 mm |
| Weight | 0.332 kg |
| Compatible Platform | Siemens SIMATIC S7-300 |
Electrical ratings depend on operating temperature, load type, and the manufacturer’s specified installation conditions. Confirm the wiring and load requirements before commissioning.
The main function of the 6AG1322-1FH00-7AA0 is to convert digital commands generated by the PLC into switched electrical outputs for connected field devices.
In an industrial control system, the PLC processes information from sensors, operator commands, and programmed logic. When a particular control condition is satisfied, the CPU sends an output command through the S7-300 backplane bus. The SM 322 module then activates the corresponding output channel.
Each output channel represents a controllable digital signal. Depending on the PLC program, an output can be switched to control a compatible external device.
For example, when a machine reaches a particular operating stage, the PLC may activate an output to energize an interface relay or an AC-operated contactor. When the programmed condition changes, the output can be switched off.
This arrangement allows the PLC to coordinate multiple field devices through a single output module.
The module provides 16 digital output channels, allowing several devices to be controlled from one S7-300 module position.
Each channel can be assigned to a particular function in the PLC program. This may include controlling machine actuators, switching auxiliary equipment, or operating status indicators.
The availability of multiple channels helps organize field wiring and reduces the need for separate output modules for every individual control point.
The module provides isolated digital outputs. Isolation helps separate the PLC-side control electronics from the external load circuits, supporting signal integrity and reducing the direct influence of electrical disturbances from field wiring.
The correct isolation arrangement and wiring practices must still be followed. Isolation does not replace protective grounding, suitable circuit protection, or proper separation of control and power conductors.
The 6AG1322-1FH00-7AA0 is designed for 120/230 V AC output applications. Each output has a rated current of 1 A, subject to operating conditions and temperature-related derating.
The module can control compatible AC-operated devices, but the electrical characteristics of each load must be checked before connection. Inductive loads, lamp loads, and other load types may have different switching and inrush-current requirements.
The module includes short-circuit protection through fuses assigned to output groups. The specified fuse arrangement helps protect the output circuitry against certain abnormal current conditions.
Protection must be coordinated with the external circuit and connected load. Engineers should follow the manufacturer’s fuse specifications and avoid treating the module’s internal protection as a substitute for complete system protection.
The 6AG1322-1FH00-7AA0 functions as an output interface within a SIMATIC S7-300 PLC architecture. It connects the controller’s programmed logic with external electrical devices.
The module communicates with the S7-300 CPU through the system backplane bus. The CPU determines the required output states based on the application program and sends the corresponding data to the output module.
This arrangement allows output operations to be coordinated with digital inputs, analog signals, timers, counters, and other control functions.
The module provides the electrical switching interface between the PLC and compatible AC field devices.
Typical connected equipment may include:
The rated current and load characteristics must be checked for every connected device.
In automated machinery, digital outputs are frequently used to execute individual steps in a production sequence.
For example, a PLC may activate a contactor when a safety and process interlock condition is satisfied. Another output may control a valve actuator or signal a downstream machine to begin operation.
The 16-channel arrangement allows several output functions to be grouped within the same control system.
When an output-controlled device fails to operate, maintenance personnel can inspect the PLC logic, output status, module connections, fuse condition, and field wiring.
A structured diagnostic process helps determine whether a problem originates from the PLC program, the output module, the external power supply, or the connected load.
The Siemens 6AG1322-1FH00-7AA0 is suitable for industrial control applications that require 16 isolated AC digital outputs and operation within its specified electrical limits.
Production machinery often uses digital outputs to control auxiliary devices, contactors, indicator lamps, and other electrical components.
The module can provide multiple switching points for PLC-controlled manufacturing sequences. Its output channels can be assigned to different machine functions according to the application program.
Industrial motor systems frequently use contactors and interface relays to control motor starter circuits.
The module can provide control signals for compatible AC-operated contactor coils, provided the coil voltage, current, inrush characteristics, and switching frequency remain within the module’s permitted limits.
The motor’s main power circuit must use appropriately rated switching and protection equipment.
Industrial process equipment may require multiple digital commands for pumps, valves, auxiliary devices, and alarm indicators.
The 16-channel output arrangement can help coordinate these devices through the S7-300 controller. Each output can be assigned to a specific process condition or sequence step.
Some industrial ventilation, heating, and utility systems use AC-operated relays and contactors for equipment control.
The module may be used to switch compatible control loads within these systems. Engineers should verify the electrical characteristics of the connected devices and account for any inductive-load limitations.
Digital outputs are commonly used to activate indicator lamps, warning devices, and external alarm interfaces.
The 6AG1322-1FH00-7AA0 can provide multiple output points for these functions, allowing the PLC to communicate equipment status and abnormal operating conditions to external devices.
The SIPLUS version features conformal coating and a specified operating temperature range of -40 to +70°C.
These characteristics can be useful in industrial installations exposed to wider temperature variations or environmental conditions that require additional protection for electronic assemblies. The module must still be installed within its specified environmental and electrical limits.
Proper installation is essential for reliable operation and long-term performance.
Before installing the module, verify that the existing SIMATIC S7-300 rack and configuration support the 6AG1322-1FH00-7AA0.
Check the CPU configuration, module position, hardware configuration in the engineering software, and the applicable system documentation.
The module is based on 6ES7322-1FH00-0AA0, but the SIPLUS version has additional environmental characteristics. Do not assume that every configuration detail is identical across all product variants.
The module is designed for 120/230 V AC output applications. The permissible load voltage range is specified as 79–264 V AC.
Confirm the voltage supplied to each output group and ensure that connected devices are compatible with the selected voltage.
Never connect a DC load simply because its current rating appears suitable. The output type and load voltage must match the module’s design.
The rated output current is 1 A per channel under the specified operating conditions. The permissible maximum decreases at elevated temperatures; for example, the listed maximum is 0.5 A per output between 40 and 60°C.
Load current, inrush current, switching frequency, and load type must all be considered during circuit design.
The module uses a 20-pole connection arrangement. Ensure that the correct connector and wiring accessories are used.
Check terminal assignments against the manufacturer’s wiring documentation. Incorrect connections can cause malfunction or damage to the module and connected equipment.
Keep field wiring organized and maintain appropriate separation between AC load wiring, PLC signal wiring, and other sensitive conductors.
Use proper grounding and cable routing practices to reduce electrical interference. Ensure that protective devices and external fuses are correctly rated for the installation.
After installation, configure the module in the SIMATIC S7-300 hardware configuration. Assign the appropriate output addresses and verify that the PLC program uses the correct channel mapping.
Confirm that the configured module matches the installed hardware and that no configuration errors are present.
Before returning the system to normal operation, test each output channel under controlled conditions.
Verify the correct output state, load operation, fuse condition, and response to PLC commands. Record the module configuration and wiring information for future maintenance.
The 6AG1322-1FH00-7AA0 is designed for use within a Siemens S7-300 automation architecture.
| Component | Function | Integration Considerations |
|---|---|---|
| SIMATIC S7-300 CPU | Executes the PLC control program | Confirm hardware configuration and supported module arrangement |
| S7-300 mounting rail and rack | Provides mechanical installation and system structure | Verify mounting and configuration requirements |
| S7-300 power supply | Supplies power to the PLC system | Confirm system power requirements and capacity |
| Digital input module | Receives discrete field signals | Coordinate input and output addressing |
| Analog input module | Measures process signals | Used where continuous measurement is required |
| Analog output module | Provides variable control signals | Suitable for applications requiring analog references |
| 20-pole connector | Provides module field wiring connections | Verify connector type and terminal assignment |
| AC interface relay | Interfaces PLC outputs with external loads | Confirm coil voltage, current, and switching characteristics |
| Contactor | Switches compatible electrical loads | Verify coil requirements and external protection |
| SIMATIC HMI | Provides operator monitoring and control | Typically communicates through the PLC |
| AC field devices | Perform switching, indication, or actuation functions | Verify voltage, current, and load type |
The actual system configuration depends on the machine design and the electrical requirements of connected field devices. Accessories and external components are not necessarily included with the module.
When replacing the 6AG1322-1FH00-7AA0, engineers should distinguish between the SIPLUS version and its standard S7-300 base model.
| Model | Description | Replacement Considerations |
|---|---|---|
| 6ES7322-1FH00-0AA0 | Standard SIMATIC S7-300 SM 322 digital output module | Base model for the SIPLUS variant; environmental specifications differ |
| 6AG1322-1FH00-7AA0 | SIPLUS S7-300 SM 322, 16 isolated AC outputs | Provides conformal coating and an extended temperature range |
| 6AG1322-1FF01-7AA0 | SIPLUS S7-300 SM 322, 8 AC digital outputs | Different channel count; verify electrical and wiring requirements |
| 6AG1322-1HH01-2AA0 | SIPLUS S7-300 relay output module | Different output technology and load characteristics |
| 6ES7322-1HH01-0AA0 | Standard S7-300 relay output module | Not a direct substitute without checking relay ratings and wiring |
A replacement should be evaluated according to the following criteria:
The standard base model may share the principal electrical output characteristics, but it does not automatically provide the same environmental protection as the SIPLUS version.
The module provides 16 output channels for controlling compatible AC field devices. This supports multiple switching functions within a single S7-300 system.
Its AC output design supports industrial control circuits operating at compatible 120 V or 230 V AC levels.
The SIPLUS configuration includes conformal coating to provide additional protection for electronic assemblies in challenging environmental conditions.
The specified -40 to +70°C operating temperature range makes the module suitable for installations requiring a wider temperature operating window.
The module is based on the established SM 322 architecture and communicates through the S7-300 backplane bus.
The module includes fused output groups, supporting protection against specified abnormal current conditions.
The module combines multiple output channels within a compact S7-300 format, helping organize control cabinet layouts and field wiring.
It is a SIPLUS S7-300 SM 322 digital output module with 16 isolated AC output channels. It is designed to control compatible field devices through a SIMATIC S7-300 PLC system.
It provides 16 digital output channels. Each channel can be assigned to a control function in the PLC program.
The module is designed for 120/230 V AC loads, with a specified permissible load voltage range of 79–264 V AC.
The rated output current is 1 A per channel under the specified conditions. At higher operating temperatures, the permissible maximum current is reduced.
The 6AG1322-1FH00-7AA0 is the SIPLUS version based on 6ES7322-1FH00-0AA0. It includes conformal coating and a specified extended operating temperature range of -40 to +70°C.
Yes, it can control compatible AC-operated contactor coils when their voltage, current, inrush characteristics, and switching requirements are within the module’s permitted limits. External protection and appropriate circuit design are essential.
No. This model is an AC digital output module. DC loads require an output module designed for the relevant DC voltage and current.
It is designed for the Siemens SIMATIC S7-300 PLC family and belongs to the SM 322 digital output module series.
The specified connection arrangement is one 20-pole connector. Verify the exact connector and terminal assignments against the product documentation before wiring.
Check the full order number, output voltage, channel count, current rating, connector arrangement, temperature range, coating requirements, and PLC hardware configuration. A standard S7-300 module may not provide the same environmental protection as the SIPLUS version.
When purchasing the Siemens 6AG1322-1FH00-7AA0, verify the complete order number on the product label. The SIPLUS designation is important because the module includes environmental protection features that distinguish it from the standard 6ES7322-1FH00-0AA0 version.
For new, surplus, or refurbished units, request clear photographs of the front label, connector area, and overall housing. Confirm the product condition, storage history, and available functional test information. For critical installations, verify the output channels under suitable test conditions before placing the module into service.
During maintenance, inspect the connector, wiring, output-group fuses, and surrounding cabinet environment. Check for signs of overheating, loose terminals, contamination, or physical damage. Record the module’s hardware configuration and PLC output address assignments.
Avoid exceeding the output current limits, particularly in elevated-temperature installations. Pay attention to the difference between resistive and inductive loads, since their switching characteristics can affect output performance and service life.
When replacing the module, confirm whether the application requires the SIPLUS environmental characteristics. Substituting a standard module without reviewing temperature and environmental conditions may reduce the reliability of the installation.
The Siemens 6AG1322-1FH00-7AA0 SIPLUS S7-300 Digital Output Module provides 16 isolated AC digital outputs for industrial automation and machine-control applications. Based on the standard 6ES7322-1FH00-0AA0, it supports 120/230 V AC loads at a rated output current of 1 A per channel and includes conformal coating for additional environmental protection.
With its -40 to +70°C operating temperature specification, 20-pole connection arrangement, and integration with SIMATIC S7-300 systems, the module is suitable for applications that require multiple AC switching points and enhanced environmental resistance.
For maintenance, replacement, and procurement projects, verifying the complete order number, output ratings, connector arrangement, and environmental requirements is essential for reliable system integration.