ProductPRODUCT
Featured products
Contact Us
- Siemens
- 6AG1210-1PE28-2AL0
- Power Module
- Germany
- 275 × 551 × 237 mm
- 28 kg
- Xiamen, China
- New & In Stock
- T/T, PayPal, Western Union
- 1 Year
- 1-3 Working Days
- DHL, UPS, TNT, FedEx and EMS.
- 24-Hour Service
- COO
- 27
Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |
Product Overview
The Siemens 6AG1210-1PE28-2AL0 Power Module is an industrial power-management component designed for integration into automation and control-system architectures. Power modules provide an important foundation for industrial electrical systems by supporting the power infrastructure required by controllers, I/O equipment, communication devices, operator interfaces, and other automation components.
In a modern industrial control cabinet, the power architecture must be carefully coordinated with the control system, field devices, protection equipment, and cabinet thermal design. A correctly integrated power module can form part of this infrastructure and contribute to stable operation of the overall automation system.
The Siemens 6AG1210-1PE28-2AL0 has supplied physical dimensions of 275 × 551 × 237 mm and a listed weight of 28 kg. Its relatively large physical footprint and weight should be taken into consideration during cabinet engineering, mounting, transportation, installation, maintenance, and replacement planning.
The exact electrical characteristics of this model, including input requirements, output characteristics, rated current, rated power, terminals, protection functions, efficiency, and environmental limits, should be verified against the applicable product documentation and the actual hardware configuration before commissioning.
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | Siemens |
| Model | 6AG1210-1PE28-2AL0 |
| Product Type | Power Module |
| Product Category | Industrial Automation Power Equipment |
| Primary Function | Power management for automation infrastructure |
| Application | Industrial control and automation systems |
| Installation | Control cabinet / suitable industrial enclosure |
| Dimensions | 275 × 551 × 237 mm |
| Weight | 28 kg |
| Typical Applications | Factory automation, process control, industrial machinery and automation infrastructure |
Important technical note: Exact voltage, current, power rating, connection details, protection functions, cooling requirements, and environmental specifications should be confirmed for the specific 6AG1210-1PE28-2AL0 before electrical installation.
What Is the Siemens 6AG1210-1PE28-2AL0?
The 6AG1210-1PE28-2AL0 is identified as a Siemens Power Module used within industrial automation and electrical control architectures.
Power modules have a different role from PLC CPUs and I/O modules. A CPU executes the automation program, while I/O modules exchange signals with field equipment. The power infrastructure provides the electrical foundation needed for these components to operate.
A simplified industrial architecture can be represented as:
Industrial Electrical Supply → Siemens 6AG1210-1PE28-2AL0 → Power Infrastructure → Automation Equipment
Depending on the system design, associated equipment can include:
- PLC controllers
- Digital I/O modules
- Analog I/O modules
- Industrial communication equipment
- HMI panels
- Sensor interfaces
- Actuator interfaces
- Control relays
- Terminal assemblies
- Protection equipment
The precise role of the power module depends on the host system and electrical design.
Function and Working Principle
Power Input and Management
The power module forms part of the electrical path between the upstream supply and the equipment supported by the automation architecture.
Industrial automation equipment requires power that is suitable for its electrical characteristics. The power system must therefore be designed around the requirements of the complete installation.
Power Conversion and Conditioning
Depending on the specific power-module architecture, industrial power equipment can perform functions such as electrical conversion, regulation, conditioning, or controlled distribution.
The exact electrical function of the 6AG1210-1PE28-2AL0 should be confirmed from the applicable Siemens technical information rather than inferred from the model designation alone.
Power Distribution
Large industrial systems frequently contain multiple electrical loads. A structured power architecture makes it possible to provide appropriate electrical power to controllers, I/O assemblies, networking equipment, and other devices.
Supporting Automation Availability
Power interruptions can affect an entire automation system. A problem within the power infrastructure may result in:
- PLC shutdown
- I/O interruption
- Communication loss
- HMI shutdown
- Machine stoppage
- Process interruption
For this reason, power-system design is an important part of industrial automation engineering.
Role in Industrial Automation
The Siemens 6AG1210-1PE28-2AL0 can be considered part of the infrastructure layer of an industrial automation system.
A typical automation architecture includes:
Power Infrastructure → Controller → I/O → Communication → Field Devices → Process
The power module supports the electrical infrastructure upon which other automation components depend.
A complete control cabinet may include:
- PLC CPUs
- Remote I/O
- Analog signal modules
- Digital signal modules
- Ethernet switches
- HMI equipment
- Industrial communication interfaces
- Sensor interfaces
- Actuator control equipment
The electrical requirements of all connected components should be evaluated when designing the power system.
Industrial Applications
Factory Automation
Automated production equipment depends on coordinated operation between controllers, I/O devices, communication networks, sensors, and actuators.
A suitable power architecture provides the electrical foundation for these systems.
Process Automation
Process-control installations often operate continuously and contain numerous electronic devices.
Power infrastructure must therefore be engineered for the requirements of the complete process-control installation.
Machine Control
Industrial machines can contain multiple control and monitoring components.
The power architecture must accommodate the electrical requirements of the machine controller, I/O, sensors, actuators, and related equipment.
Production Lines
Automated production lines may contain several interconnected control cabinets and machine stations.
A properly designed power system contributes to stable operation across the production environment.
Industrial Infrastructure
Utility systems, manufacturing plants, material-handling systems, and other industrial installations can require dedicated electrical infrastructure for control and monitoring equipment.
System Integration Architecture
A generalized system arrangement is:
Incoming Electrical Supply
↓
Siemens 6AG1210-1PE28-2AL0 Power Module
↓
Power Distribution / Electrical Infrastructure
↓
PLC and Automation Controllers
↓
I/O and Communication Systems
↓
Sensors and Actuators
↓
Industrial Machine or Process
The actual architecture should always follow the electrical design of the specific installation.
Installation Guidelines
The supplied physical dimensions of the 6AG1210-1PE28-2AL0 are:
275 × 551 × 237 mm
The supplied weight is:
28 kg
These specifications are important for both mechanical and electrical installation planning.
Mounting Structure
Because the listed weight is 28 kg, the mounting structure must be capable of safely supporting the module and the mechanical loads associated with installation and operation.
Mounting hardware should be appropriate for the cabinet structure and installation environment.
Installation Space
The physical dimensions should be incorporated into the cabinet layout.
Additional space should also be considered for:
- Power wiring
- Cable bending radius
- Cooling airflow
- Terminal access
- Inspection
- Maintenance
- Component removal
The product dimensions alone should not be treated as the complete service-space requirement.
Accessibility
The module should be positioned so that technicians can safely access its relevant connections and service areas.
Good accessibility reduces maintenance time and helps prevent accidental damage to neighboring components.
Cabinet Design and Thermal Management
The relatively large size of the 6AG1210-1PE28-2AL0 should be considered when designing the control cabinet.
Thermal calculations should account for:
- Power-module heat generation
- Heat from adjacent components
- Cabinet ambient temperature
- Air circulation
- Cooling equipment
- Cabinet dimensions
- Ventilation paths
Airflow should not be blocked by cable bundles or neighboring equipment.
Where several high-power components are installed in the same enclosure, the total cabinet thermal load should be evaluated rather than considering each component independently.
Electrical Integration
Before energizing the power module, the complete electrical installation should be inspected.
Important considerations include:
- Incoming supply
- Protective grounding
- Power connections
- Cable sizing
- Circuit protection
- Isolation equipment
- Downstream loads
- Terminal connections
- Wiring identification
The exact terminal arrangement and electrical connection requirements should be verified for the actual 6AG1210-1PE28-2AL0 configuration.
PLC and Automation Integration
A power module can support the infrastructure of a Siemens-based automation system containing controllers and peripheral equipment.
A typical control architecture may include:
| Component | Typical Function |
|---|---|
| 6AG1210-1PE28-2AL0 | Power infrastructure |
| Siemens PLC CPU | Executes automation logic |
| Digital I/O | Processes discrete signals |
| Analog I/O | Processes continuous process signals |
| Industrial Ethernet Equipment | Provides network communication |
| HMI | Operator monitoring and control |
| Sensors | Provides process information |
| Actuators | Performs physical control actions |
| Protection Equipment | Provides electrical protection |
| Terminal Assemblies | Organizes field wiring |
The exact system configuration depends on the application and electrical design.
Commissioning Procedure
Step 1: Verify Product Identification
Confirm that the installed unit is the correct Siemens 6AG1210-1PE28-2AL0 model.
Check the product label and available hardware information before connecting power.
Step 2: Inspect Mechanical Installation
Confirm that the module is securely mounted and that the mounting structure is suitable for the listed 28 kg weight.
Step 3: Check Cabinet Clearance
Verify that sufficient space is available around the unit for wiring, cooling, inspection, and maintenance.
Step 4: Verify Electrical Supply
Confirm that the upstream supply meets the requirements of the installed product configuration.
Step 5: Check Grounding
Verify protective grounding and the cabinet grounding arrangement.
Step 6: Inspect Wiring
Check all relevant power connections, terminals, cables, and protection devices.
Step 7: Verify Downstream Loads
Confirm that connected equipment is appropriate for the designed power architecture.
Step 8: Energize Under Controlled Conditions
Apply power according to the approved commissioning procedure.
Step 9: Check Automation Equipment
Verify that connected controllers, I/O modules, communication equipment, and HMI systems operate normally.
Step 10: Record Commissioning Results
Document the final configuration and any relevant commissioning measurements for future maintenance.
Troubleshooting Guide
Power Is Not Available
If connected automation equipment does not receive power, inspect the power path systematically.
Potential causes include:
- Missing incoming supply
- Incorrect wiring
- Open circuit protection
- Loose terminal
- Downstream fault
- Incorrect configuration
- Internal power-module fault
Begin with the upstream supply before replacing the module.
Intermittent Power
Intermittent operation can be caused by:
- Loose connections
- Damaged cables
- Unstable incoming power
- Excessive loading
- Thermal conditions
- Protection-device operation
- Faults in downstream equipment
Monitor the system while checking the complete electrical path.
PLC Does Not Start
If the PLC or automation equipment fails to start, inspect:
- Power supply
- Power-module connections
- Circuit protection
- Downstream wiring
- Controller connections
- System diagnostics
Do not automatically assume that the power module is defective.
Abnormal Cabinet Temperature
If cabinet temperature becomes excessive, investigate:
- Restricted airflow
- Insufficient ventilation
- High ambient temperature
- Excessive cabinet heat load
- Cooling-system problems
- Dust accumulation
Thermal problems can affect multiple devices simultaneously.
Unexpected System Restart
Unexpected PLC or automation-system resets may be associated with unstable power, loose wiring, protection-device operation, or faults elsewhere in the electrical system.
Power quality and downstream loads should be checked before replacing components.
Preventive Maintenance
Inspect Electrical Connections
Periodically inspect relevant connections for:
- Loose terminals
- Corrosion
- Discoloration
- Heat damage
- Insulation deterioration
Maintain Cabinet Cleanliness
Dust and contamination can reduce cooling performance and contribute to thermal problems.
The cabinet should therefore be maintained according to the environmental requirements of the installation.
Check Cooling
Verify that ventilation paths remain clear and that cabinet cooling equipment operates correctly.
Inspect Mounting
Because the listed module weight is 28 kg, mounting hardware should be inspected during scheduled maintenance.
Look for:
- Loose mounting hardware
- Mechanical movement
- Panel deformation
- Vibration-related problems
Monitor System Behavior
Record abnormal events such as:
- Power interruptions
- Repeated restarts
- Protection trips
- Communication interruptions
- Unexpected controller shutdowns
Trend information can help identify developing electrical problems.
Replacement Considerations
When replacing a Siemens 6AG1210-1PE28-2AL0 Power Module, verify the complete model number before installation.
Important identification information includes:
- Full order number
- Hardware revision
- Electrical characteristics
- Connection arrangement
- System configuration
- Mounting requirements
- Cooling requirements
- Connected loads
The supplied physical dimensions are 275 × 551 × 237 mm, and the supplied weight is 28 kg.
A different Siemens power module should not be considered a direct replacement solely because it has a similar physical appearance.
Electrical compatibility, mechanical compatibility, system architecture, and installation requirements should all be verified.
Handling and Installation Planning
The 28 kg listed weight requires careful handling during installation and replacement.
Before moving the module into position:
- Confirm cabinet access.
- Prepare suitable lifting or handling equipment where necessary.
- Verify the mounting structure.
- Plan cable routing.
- Ensure sufficient installation clearance.
- Avoid placing mechanical stress on connectors or terminals.
- Secure the unit before completing electrical connections.
The 275 × 551 × 237 mm dimensions should also be included in cabinet drawings and maintenance planning.
For large automation cabinets, installation and service access should be considered during the engineering stage.
Compatible Automation Components
Depending on the system architecture, the 6AG1210-1PE28-2AL0 may be integrated with:
- Siemens PLC controllers
- Siemens CPU modules
- Siemens digital I/O modules
- Siemens analog I/O modules
- Industrial Ethernet switches
- PROFINET communication equipment
- HMI systems
- Sensor interfaces
- Actuator interfaces
- Terminal blocks
- Circuit breakers
- Fuses
- Disconnect devices
- Industrial power-distribution equipment
Actual compatibility should be verified according to the complete system design.
Related Siemens Automation Models
| Model | Product Type | General Role |
|---|---|---|
| 6AG1210-1PE14-2UL1 | Central Processing Unit | PLC control |
| 6AG1210-1PE18-2UL1 | Central Processing Unit | PLC control |
| 6AG1210-1PE21-2UL0 | Power Module | Industrial power infrastructure |
| 6AG1210-1PE23-2UL0 | Power Module | Industrial power infrastructure |
| 6AG1210-1PE26-2AL0 | Power Module | Industrial power infrastructure |
| 6AG1210-1PE26-2UL0 | Power Module | Industrial power infrastructure |
| 6AG1210-1PE28-2AL0 | Power Module | Industrial power infrastructure |
| 6AG1202-2BH00-2BA3 | Digital Output Module | Digital output control |
| 6AG1206-2BB00-7AC2 | Industrial Ethernet Switch | Industrial networking |
| 6AG1208-0BA00-7AC2 | Industrial Ethernet Switch | Industrial networking |
These related models should not be assumed to be interchangeable without confirming electrical and mechanical compatibility.
Engineering Best Practices
Plan for the 28 kg Weight
The mounting structure, cabinet panel, and installation hardware should be designed to safely support the listed 28 kg weight.
Account for the Physical Dimensions
The 275 × 551 × 237 mm dimensions should be included in cabinet layout and transportation planning.
Evaluate Total Power Demand
Calculate the expected demand of connected controllers, I/O modules, communication equipment, and other loads.
Provide Adequate Cooling
Consider the total heat generated by the complete cabinet rather than the power module alone.
Separate Power and Signal Wiring
Where appropriate, route power and sensitive signal cables to reduce electrical interference and simplify troubleshooting.
Provide Circuit Protection
Use appropriate upstream protection and isolation according to the electrical design.
Maintain Grounding
Protective grounding should be properly implemented and checked during commissioning and maintenance.
Keep Documentation Updated
Maintain accurate electrical drawings, wiring information, equipment identification, cabinet layouts, and maintenance records.
Key Advantages
- Siemens industrial Power Module
- Designed for integration into industrial automation infrastructure
- Suitable for control-cabinet applications
- Supports structured industrial power architecture
- Supplied dimensions of 275 × 551 × 237 mm
- Supplied weight of 28 kg
- Suitable for large industrial control installations
- Can form part of Siemens automation architectures
- Applicable to factory automation systems
- Suitable for process-control environments
- Supports organized power-system engineering
- Provides a foundation for connected automation equipment
- Suitable for industrial maintenance and replacement planning
Technical FAQs
What is the Siemens 6AG1210-1PE28-2AL0?
The Siemens 6AG1210-1PE28-2AL0 is identified as a Power Module for industrial automation and control-system applications.
What are the dimensions of the 6AG1210-1PE28-2AL0?
The supplied dimensions are 275 × 551 × 237 mm.
How much does the 6AG1210-1PE28-2AL0 weigh?
The supplied weight is 28 kg.
What is the purpose of a Power Module in industrial automation?
A power module forms part of the electrical infrastructure supporting automation equipment. Depending on the specific design, power equipment may perform functions related to electrical conversion, regulation, conditioning, or distribution.
Can this module be installed in a PLC control cabinet?
It can form part of a PLC-based control cabinet when its electrical and mechanical requirements match the complete system design.
What should be considered when installing a 28 kg power module?
Mounting strength, cabinet dimensions, handling, cable routing, ventilation, service access, and mechanical support should all be considered.
Why are the physical dimensions important?
The 275 × 551 × 237 mm dimensions affect cabinet layout, equipment spacing, transportation, installation access, cooling, and maintenance planning.
What can cause power interruptions?
Possible causes include upstream supply problems, loose connections, overloaded circuits, protection-device operation, damaged wiring, thermal conditions, or faults in connected equipment.
Should another Siemens Power Module be used as a replacement?
A different model should not be assumed to be interchangeable. The complete electrical, mechanical, and system requirements must be verified before replacement.
How can reliability be improved?
Reliable operation can be supported through correct cabinet design, proper grounding, appropriate circuit protection, adequate cooling, secure wiring, regular inspection, and systematic preventive maintenance.
Conclusion
The Siemens 6AG1210-1PE28-2AL0 Power Module is an industrial power component intended to form part of the electrical infrastructure of automation and control systems. Power infrastructure plays a fundamental role in supporting PLCs, I/O modules, communication equipment, HMI systems, and other electronic devices used in industrial environments.
The supplied physical dimensions of 275 × 551 × 237 mm and weight of 28 kg are important engineering considerations. These specifications affect cabinet construction, mounting strength, handling, transportation, ventilation, cable routing, service access, and replacement procedures.
For industrial applications, the 6AG1210-1PE28-2AL0 should be incorporated into a complete electrical architecture based on the requirements of the connected automation equipment. Proper grounding, circuit protection, thermal management, mechanical support, wiring practices, and commissioning procedures are essential for dependable system operation.
When installing or replacing the Siemens 6AG1210-1PE28-2AL0, technicians and engineers should verify the complete product identification and confirm the applicable electrical and mechanical specifications before energizing the system. This ensures that the power module is correctly matched to the intended automation architecture and installed safely within the industrial control environment.