ProductPRODUCT
Featured products
Contact Us
- Schneider
- 170MCI10001
- Bus Pre-Connected Cable
- France
- 1 meter
- 3 kg
- Xiamen, China
- New & In Stock
- T/T, PayPal, Western Union
- 1 Year
- 1-3 Working Days
- DHL, UPS, TNT, FedEx and EMS.
- 24-Hour Service
- COO
- 6
Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |
Product Overview
The Schneider 170MCI10001 is a Bus Pre-connected Cable designed for use in industrial automation and distributed I/O systems. As a dedicated connection component within Schneider automation architectures, the cable provides a practical interface for establishing communication and bus connections between compatible system components.
In industrial control systems, communication reliability depends not only on controllers, I/O modules, and network interfaces, but also on the physical cabling that connects these devices. A properly designed and installed bus cable provides the electrical path required for data exchange between system components while helping simplify installation and maintenance.
The 170MCI10001 is identified as a pre-connected bus cable, meaning that it is intended to provide a ready-to-install connection rather than requiring technicians to fabricate and terminate the complete cable assembly in the field. This can help reduce installation work and minimize the possibility of wiring errors.
The specified cable length for the Schneider 170MCI10001 is 1 meter, while the specified shipping weight is 3 kg.
Because the 170MCI10001 is a cable assembly rather than an electronic controller or I/O module, its main function is physical and electrical interconnection. It should therefore be evaluated according to connector compatibility, bus architecture, cable length, installation environment, and the requirements of the associated Schneider automation system.
Technical Specifications
| Parameter | Details |
|---|---|
| Manufacturer | Schneider Electric |
| Model | 170MCI10001 |
| Product Type | Bus Pre-connected Cable |
| Primary Function | Bus system interconnection |
| Connection Type | Pre-connected cable assembly |
| Cable Length | 1 meter |
| Shipping Weight | 3 kg |
| Application | Industrial automation and control systems |
| System Role | Physical bus connection |
| Installation | Control cabinet / automation system installation |
| Product Category | Industrial automation cable |
| Typical Use | Connection of compatible automation system components |
| Maintenance Use | Replacement and system maintenance |
Note: The available product information specifies a cable length of 1 meter and a shipping weight of 3 kg. A separate product body dimension is not specified in the supplied data, so no unverified physical dimensions are included here.
What Is the Schneider 170MCI10001?
The Schneider 170MCI10001 is a pre-connected bus cable used to establish a physical connection between compatible components within an industrial automation system.
Unlike a PLC CPU, communication adapter, or I/O module, the 170MCI10001 does not independently process control logic. Instead, it provides the physical connection required for the associated bus or system architecture.
The importance of this type of cable can sometimes be underestimated. A controller may be functioning correctly and an I/O module may also be healthy, but communication can still fail if the physical connection between the devices is interrupted.
A dedicated pre-connected cable can help simplify the connection process because the cable assembly is prepared for installation. This can be particularly useful when maintaining established industrial control systems where the correct connector arrangement and cable configuration are important.
The 1-meter length makes the 170MCI10001 suitable for relatively short-distance connections between equipment installed within the same cabinet, rack, or closely positioned automation assembly, depending on the system design.
Function and Working Principle
The fundamental function of the 170MCI10001 is to provide a physical electrical path between compatible automation components.
A simplified system structure can be represented as:
Automation Component A → 170MCI10001 → Automation Component B
Depending on the architecture, the connected devices may include bus interfaces, I/O assemblies, communication components, controller-related equipment, or other compatible Schneider automation hardware.
The cable itself does not interpret the transmitted information. Instead, it carries the electrical signals generated by the connected devices.
For example, when one automation component sends bus data, the electrical communication signal travels through the cable to the receiving component. The receiving hardware then interprets the data according to the applicable communication architecture.
This means that cable integrity is an important part of overall system reliability.
A properly installed cable should provide:
- Secure physical connection
- Stable electrical continuity
- Correct connector engagement
- Appropriate cable routing
- Protection against mechanical damage
- Suitable separation from strong electrical interference
Because the 170MCI10001 is pre-connected, installation can also reduce the need for field termination work.
Role in Industrial Control Systems
The Schneider 170MCI10001 can serve as an important connection component within an industrial automation architecture.
Modern control systems often contain many interconnected components. Controllers, communication interfaces, I/O assemblies, terminal equipment, and other modules must exchange information reliably. While electronic modules provide the communication functionality, the cable provides the physical path that allows the signals to travel between those devices.
A typical arrangement can be represented as:
PLC / Controller → Communication Interface → Bus Cable → Remote or Associated System Component
The exact configuration depends on the specific Schneider system.
Using a pre-connected cable can simplify maintenance because technicians can replace the cable assembly rather than manufacturing and terminating an equivalent cable during a service operation.
This can be especially useful in older automation systems where maintaining the original connection architecture is important.
Why Pre-connected Bus Cables Are Important
A bus cable is not simply a passive piece of wiring in an industrial automation system. The quality and configuration of the physical connection can directly affect communication reliability.
Common problems associated with poorly installed or damaged cables include:
- Intermittent communication
- Loss of communication
- Communication alarms
- Unstable I/O operation
- Unexpected controller diagnostics
- Data transmission errors
- Intermittent module recognition
A factory-prepared cable assembly helps reduce the number of field termination points and can therefore simplify installation.
For replacement work, using the correct cable model also helps maintain the intended connector arrangement and physical installation characteristics of the original system.
Industrial Applications
The Schneider 170MCI10001 can be used in industrial automation environments where compatible bus connections are required.
Typical application areas include:
- Factory automation
- PLC control systems
- Distributed I/O systems
- Machine automation
- Manufacturing equipment
- Process control systems
- Industrial communication systems
- Control cabinets
- Automation equipment maintenance
- Replacement of existing bus cables
Its 1-meter cable length makes it particularly useful where connected components are positioned relatively close to one another.
Compatible System Components
The exact components compatible with the 170MCI10001 depend on the specific Schneider automation architecture in which the cable is installed. In general, the cable may form part of a system containing several categories of automation equipment.
| Component | Type | Typical Function |
|---|---|---|
| 170MCI10001 | Bus Pre-connected Cable | Provides the physical bus connection |
| PLC Controller | Control Processor | Executes application logic |
| Remote I/O Module | I/O Equipment | Collects and outputs field signals |
| Communication Adapter | Communication Interface | Connects automation equipment to a network |
| Bus Interface | Network Interface | Provides bus communication |
| Terminal Assembly | Connection Equipment | Connects field wiring |
| Industrial Network Equipment | Communication Equipment | Supports system communication |
| Control Cabinet | Installation Environment | Houses automation components |
Before ordering a replacement cable, the exact model number and the connection requirements of the installed system should always be checked.
Installation and System Integration
Correct installation of the 170MCI10001 is important because improper cable installation can create communication problems even when all connected electronic components are operating normally.
A general installation process includes the following steps:
- Place the automation system in the appropriate maintenance state.
- Follow the site’s electrical isolation and safety procedures.
- Identify the existing bus cable.
- Verify the complete 170MCI10001 model number.
- Confirm the required cable length.
- Inspect the replacement cable for physical damage.
- Inspect the connectors before installation.
- Identify both ends of the existing connection.
- Disconnect the existing cable according to the maintenance procedure.
- Install the replacement cable in the correct orientation.
- Fully engage the connectors.
- Ensure the cable is not under excessive mechanical tension.
- Maintain appropriate bend radius.
- Keep the cable away from unnecessary sources of electrical interference.
- Secure the cable if required.
- Restore the system according to the approved procedure.
- Check communication status.
- Verify the operation of connected modules.
- Perform a functional system test.
The cable should not be sharply bent, crushed, stretched, or routed in a way that places unnecessary mechanical stress on the connectors.
Installation Considerations for the 1-Meter Cable
The specified cable length of the 170MCI10001 is 1 meter. During installation, the available cable length should be considered carefully.
A cable that is too short may create mechanical tension at the connectors. Excessive tension can increase the possibility of connector damage or intermittent electrical contact.
At the same time, unnecessary loops should be avoided when routing a short cable inside a control cabinet.
A good installation should provide enough slack for maintenance without creating unnecessary cable congestion.
The cable should also be routed in a manner that minimizes exposure to strong electromagnetic interference from equipment such as:
- Variable-frequency drives
- Large motors
- Contactors
- Transformers
- High-current power cables
- Switching power equipment
Good cabinet layout and cable separation can contribute to more stable communication.
Maintenance and Troubleshooting
When troubleshooting a system containing the 170MCI10001, the cable should be considered one possible source of communication problems.
A cable fault can sometimes appear similar to an electronic module failure. For this reason, technicians should inspect the physical connection before replacing expensive control hardware.
| Observed Condition | Possible Area to Check |
|---|---|
| No communication | Cable connection, connector, associated module or communication interface |
| Intermittent communication | Loose connector, damaged cable or mechanical stress |
| Module intermittently disappears | Cable continuity, connector engagement or bus connection |
| Communication alarm | Bus cable, network interface or system configuration |
| Communication becomes unstable after maintenance | Incorrect cable installation or connector engagement |
| Physical cable damage | Cable replacement recommended |
| Connector cannot be secured | Connector or mating interface inspection required |
A practical troubleshooting sequence is:
Power and Safety → Cable Identification → Connector Inspection → Cable Routing → Continuity / Connection Check → Associated Module → Communication System
This approach can help isolate a physical connection problem before replacing electronic hardware.
Common Causes of Bus Cable Problems
Industrial bus cables may experience problems because of mechanical, electrical, or environmental conditions.
- Loose connector
- Incomplete connector engagement
- Physical cable damage
- Excessive bending
- Excessive mechanical tension
- Improper cable routing
- Electrical interference
- Connector contamination
- Improper maintenance handling
- Incorrect replacement cable
- Damaged mating connector
- Long-term mechanical wear
In many cases, careful inspection of the physical connection can provide useful information before electrical troubleshooting begins.
Replacement Considerations
When replacing the Schneider 170MCI10001, technicians should verify the complete product identification rather than selecting a cable based only on appearance.
Important information includes:
- Model number: 170MCI10001
- Product type: Bus Pre-connected Cable
- Specified cable length: 1 meter
- Connector arrangement
- Associated automation equipment
- Bus architecture
- Installation location
- Required cable routing
The connector configuration is particularly important. A cable with the same approximate length may not be a suitable replacement if its connectors or electrical characteristics are different.
For an existing automation system, matching the original part number is generally the preferred approach when maintaining the established system architecture.
Recommended Alternative Models
The following products and product categories may be considered during replacement planning or system modernization. They should not automatically be treated as direct substitutes for the 170MCI10001 without confirming connector compatibility, bus architecture, electrical characteristics, and system requirements.
| Model / Product | Type | Key Feature | Application |
|---|---|---|---|
| 170MCI10001 | Bus Pre-connected Cable | 1-meter pre-connected bus cable | Compatible industrial automation systems |
| 170MCI Series Bus Cables | Bus Cable | System-specific connection | Modicon automation |
| Modicon Pre-connected Cables | Pre-assembled Cable | Reduced field termination work | Control system installation |
| Industrial Bus Cables | Communication Cable | Industrial data connection | Automation networks |
| Remote I/O Bus Cables | I/O Communication Cable | Remote I/O interconnection | Distributed I/O systems |
| PLC Communication Cables | Communication Cable | Controller-to-device communication | PLC systems |
| Pre-terminated Industrial Cables | Cable Assembly | Factory-prepared connections | Industrial equipment |
| Custom Industrial Bus Assemblies | Bus Cable Assembly | Application-specific configuration | Special automation installations |
Replacement recommendation: For an existing system, the exact Schneider 170MCI10001 should be preferred when maintaining the original configuration. Alternative cables should only be selected after confirming connector type, bus architecture, cable requirements, and compatibility with the connected Schneider equipment.
Key Advantages
- Provides a ready-to-install bus connection
- Specified 1-meter cable length for short-distance equipment interconnection
- Reduces the need for field cable termination
- Helps simplify installation and maintenance
- Supports structured industrial automation wiring
- Useful for replacement of existing bus cable assemblies
- Can reduce installation-related wiring errors
- Suitable for industrial control system maintenance
- Provides a dedicated physical connection between compatible components
- Supports organized control cabinet wiring
Technical FAQs
What is the Schneider 170MCI10001?
The Schneider 170MCI10001 is a Bus Pre-connected Cable designed to provide a physical connection between compatible components in an industrial automation system.
What is the main function of the 170MCI10001?
Its main function is to provide the physical electrical connection required by the associated bus or automation system architecture.
How long is the Schneider 170MCI10001?
The specified cable length is 1 meter.
What is the shipping weight of the 170MCI10001?
The specified shipping weight is 3 kg.
Is the 170MCI10001 a communication module?
No. It is a pre-connected cable assembly. It provides the physical connection between compatible automation components but does not independently process control data.
What equipment can the 170MCI10001 connect?
The exact compatible equipment depends on the Schneider automation architecture. It is intended for use with compatible bus and automation components that match its connector and electrical requirements.
Why use a pre-connected bus cable?
A pre-connected cable can simplify installation because the connection assembly is prepared in advance, reducing the amount of field termination work and potentially reducing wiring errors.
Can any 1-meter industrial cable replace the 170MCI10001?
No. Cable length alone does not determine compatibility. Connector type, electrical characteristics, bus architecture, and the associated automation equipment must also match.
What can cause a bus communication problem?
Possible causes include loose connectors, damaged cables, excessive bending, mechanical stress, electrical interference, connector contamination, incorrect cable installation, or problems with the connected communication equipment.
How should the 170MCI10001 be inspected?
Technicians should inspect the cable jacket, connectors, connection points, routing, mechanical stress, and physical condition. The associated modules and communication system should also be checked if the cable appears normal.
Does the 170MCI10001 have a specified product dimension?
The supplied product information specifies the cable length and shipping weight but does not provide a separate product body dimension. Therefore, an unverified dimension should not be assumed.
What should be checked before purchasing a replacement?
Verify the complete model number, cable length, connector arrangement, bus architecture, associated Schneider equipment, and installation requirements.
Conclusion
The Schneider 170MCI10001 Bus Pre-connected Cable is a dedicated industrial automation cable assembly designed to provide a physical bus connection between compatible system components.
Unlike a PLC controller or communication module, the 170MCI10001 does not perform control logic or independently process automation data. Its purpose is to provide the electrical connection required for communication between the connected devices.
The specified cable length is 1 meter, while the specified shipping weight is 3 kg. Because no separate product body dimensions were supplied, no unverified dimensions have been included in the technical specification table.
For maintenance engineers and system integrators, selecting the correct bus cable is important because an incorrect or damaged cable can cause communication instability even when the connected electronic modules are functioning correctly.
When replacing a 170MCI10001, technicians should verify the complete model number, connector arrangement, cable length, bus architecture, and compatibility with the existing Schneider automation system. When these requirements are correctly matched, the 170MCI10001 provides a practical and organized solution for maintaining reliable physical connections within industrial control and automation systems.