Product Overview

The Ingersoll Rand 24900458 Oil Filter is a replacement filtration element designed for compatible industrial air compressor lubrication systems. It is used to remove solid contaminants from circulating compressor oil or coolant, helping maintain fluid cleanliness and protect important compressor components.

In rotary screw air compressors, lubricant performs several essential functions. It lubricates moving components, helps remove heat generated during compression, and contributes to sealing within the compression process. During operation, the circulating fluid can collect dust, metal particles, wear debris, and other contaminants. Without effective filtration, these particles may contribute to premature component wear, reduced heat-transfer efficiency, and increased maintenance requirements.

The 24900458 filter element helps address these conditions by filtering the circulating fluid before it returns to the compressor system. Regular inspection and replacement help maintain the cleanliness of the lubrication circuit and support reliable compressor operation.

This filter is associated with selected Ingersoll Rand compressor models, including certain RS90ie, RS110ie, RS132i, RS132ie, RS160i, and RS160ie units. However, compatibility should always be verified using the compressor model and serial number because equipment configurations can differ.

The supplied product dimensions are 118 × 118 × 364 mm, and the listed weight is 2.54 kg. These specifications can assist with product identification, inventory management, and shipping preparation.

The additional reference number supplied for this listing is 47639436001. Buyers should verify the relationship between this number and 24900458 against the product label or equipment parts documentation before ordering.

Technical Specifications

Note: Specifications are based on the supplied product information and available product references. Confirm the additional reference number, exact filter configuration, and replacement requirements against the compressor’s serial-number-specific documentation.

Function and Working Principle

The Ingersoll Rand 24900458 filter element operates within the compressor’s fluid circulation system. Its main purpose is to capture contaminants while allowing the required lubricant flow to continue through the system.

1. Contaminant Removal

During compressor operation, oil or coolant can accumulate particles from normal equipment wear, environmental contamination, and fluid degradation.

The filter media captures solid particles as the fluid passes through the element. This helps reduce the amount of contamination circulating through the compressor.

2. Protection of Internal Components

Clean lubricant is important for protecting bearings, moving components, and other parts that depend on proper lubrication.

By reducing the circulation of solid contaminants, the filter helps limit abrasive wear and supports the reliable operation of the compressor’s lubrication system.

3. Maintaining Fluid Circulation

A filter must provide sufficient filtration while maintaining the flow required by the compressor.

As contaminants accumulate, the filter element may become increasingly restricted. Excessive restriction can affect fluid circulation and may cause the compressor to operate outside its intended conditions.

Regular inspection and replacement help prevent problems associated with an overloaded filter element.

4. Supporting Compressor Thermal Management

Compressor lubricant also contributes to heat transfer. In rotary screw compressors, it helps carry heat away from internal components.

Maintaining clean fluid supports the overall condition of the lubrication circuit and helps the compressor maintain its intended operating performance.

Role in Industrial Air Compressor Systems

The 24900458 filter is a maintenance component rather than an electronic control device. Nevertheless, its condition can directly influence compressor reliability and maintenance requirements.

Lubrication System Protection

The filter helps maintain lubricant cleanliness before the fluid reaches critical compressor components. This is important in equipment operating for extended periods or under demanding industrial conditions.

Compressor Reliability

Contamination can contribute to wear, restricted passages, and increased maintenance requirements. A suitable replacement filter helps maintain the intended filtration function.

Maintenance Planning

The filter provides a scheduled maintenance point within the compressor service program. Maintenance personnel can inspect operating hours, service history, and filter condition to determine when replacement is required.

Equipment Lifecycle Management

Using the correct replacement element helps maintenance teams preserve the intended filtration arrangement of existing Ingersoll Rand compressor installations.

Industrial Applications

The Ingersoll Rand 24900458 filter is intended for compatible compressor systems. Its application should be confirmed against the equipment model and serial number.

1. Rotary Screw Air Compressors

Rotary screw compressors rely on a circulating lubricant system to support lubrication, cooling, and sealing. The filter helps remove contaminants from the circulating fluid.

2. Manufacturing Facilities

Manufacturing plants often operate compressed-air equipment for pneumatic tools, production machinery, packaging lines, and automated processes. Maintaining compressor filtration is important for dependable compressed-air production.

3. Industrial Processing Plants

Process industries may require continuous compressed-air availability for pneumatic equipment and supporting machinery. Routine filter replacement helps reduce avoidable maintenance issues associated with contaminated lubricant.

4. Packaging and Material Handling

Compressed air is commonly used in packaging machinery, conveying equipment, and pneumatic actuators. Maintaining the compressor’s lubrication system supports the availability of these supporting utilities.

5. General Industrial Maintenance

The filter may be used during scheduled servicing or corrective maintenance of compatible Ingersoll Rand compressors. Correct part identification is essential to ensure the replacement element matches the installed filtration system.

Installation and Replacement Guidelines

Correct filter replacement helps maintain fluid circulation and prevent contamination from entering the compressor system.

1. Confirm the Part Number

Before installation, compare the replacement filter with the removed element and the compressor’s parts documentation.

Check the 24900458 part number, dimensions, connection arrangement, and equipment compatibility. The additional reference 47639436001 should also be verified before purchase because its association with 24900458 requires confirmation.

2. Prepare the Compressor

Stop the compressor and isolate it according to the manufacturer’s maintenance procedure. Allow the equipment to cool and ensure that pressure has been safely released where required.

Follow the equipment’s lockout and safety procedures before opening the lubrication circuit.

3. Remove the Used Filter

Remove the existing filter using the appropriate tools and procedures. Take care to prevent residual oil or contamination from entering nearby components.

Inspect the filter mounting surface and surrounding connections before installing the replacement.

4. Install the Replacement Element

Check the replacement element for damage and verify that the sealing surface is clean. Follow the manufacturer’s instructions for seal preparation, installation, and tightening.

Avoid excessive tightening, which may damage the filter housing or sealing components.

5. Check for Leakage

After installation, restore the system according to the compressor service procedure. Inspect the filter connection for leakage and confirm that the compressor operates normally.

6. Record Maintenance Information

Record the replacement date, operating hours, part number, and relevant inspection results. This information helps maintenance teams plan future service intervals and track component history.

Compatible System Components

The 24900458 filter works as part of the compressor’s lubrication and cooling arrangement. Related components may include:

These components are examples of equipment within a compressor system. They are not necessarily included with the 24900458 filter.

Replacement and Selection Considerations

When sourcing a replacement for the Ingersoll Rand 24900458, the complete part number and compressor application should be checked.

A filter that has similar dimensions is not necessarily a suitable replacement. Filtration performance, connection design, sealing, and flow characteristics must also meet the equipment requirements.

Key Advantages

Effective Contaminant Filtration

The filter element helps capture solid particles in the circulating compressor lubricant, supporting cleaner fluid throughout the lubrication circuit.

Protection of Compressor Components

Maintaining suitable fluid cleanliness helps reduce contamination-related wear in components that depend on proper lubrication.

Support for Reliable Operation

Routine replacement helps prevent excessive filter restriction and supports stable compressor maintenance practices.

Designed for Industrial Compressor Service

The 24900458 is identified as an Ingersoll Rand compressor filter element for selected industrial equipment.

Convenient Maintenance Replacement

Its replaceable filter construction supports scheduled servicing without requiring replacement of the complete compressor assembly.

Useful for Spare Parts Inventory

The part number and supplied physical specifications help maintenance departments identify and manage replacement filter inventory.

Technical FAQs

1. What is the Ingersoll Rand 24900458?

The 24900458 is an oil or coolant filter element used in compatible Ingersoll Rand industrial air compressors. It removes contaminants from the circulating compressor fluid.

2. What is the main function of this filter?

Its primary function is to capture solid contaminants in the lubricant circuit, helping protect compressor components and maintain fluid cleanliness.

3. Which compressors use the 24900458 filter?

Available product references list selected RS90ie, RS110ie, RS132i, RS132ie, RS160i, and RS160ie models. Confirm compatibility using the compressor’s serial number before ordering.

4. What are the dimensions of the 24900458?

The supplied dimensions are 118 × 118 × 364 mm. Compare these values with the actual replacement element and equipment documentation before installation.

5. What is the weight of the filter?

The supplied product weight is 2.54 kg. Packaging and shipping weight may be different.

6. How often should the filter be replaced?

Some product references recommend replacement at approximately 4,000 operating hours or every six months. The actual interval depends on the compressor model, operating conditions, lubricant quality, and manufacturer maintenance requirements.

7. Can an aftermarket filter be used?

An aftermarket filter may be considered if its dimensions, filtration performance, flow characteristics, sealing arrangement, and equipment compatibility meet the required specifications. Do not select a replacement based on dimensions alone.

8. What happens if the oil filter becomes blocked?

A heavily restricted filter can interfere with the intended lubricant flow and may affect compressor operation. Follow the equipment’s inspection and replacement procedures, and investigate any filter-related alarms or abnormal operating conditions.

9. What should be checked before purchasing?

Verify the part number, compressor model, serial number, dimensions, filter configuration, and supplier documentation. Also confirm whether the product is genuine OEM or an aftermarket replacement.

10. Is 47639436001 confirmed as an alternative number for 24900458?

The available references reviewed for this article confirm 24900458 but do not establish the relationship with 47639436001. Check the original component label or an authorized parts catalog before treating the numbers as interchangeable.

Procurement and Maintenance Recommendations

When purchasing the Ingersoll Rand 24900458 filter, verify the part number against the compressor’s maintenance documentation and equipment serial number. This is especially important when an additional reference number is included in the supplier listing.

For industrial spare-parts procurement, confirm whether the filter is genuine OEM or an aftermarket equivalent. Request clear product photographs, dimensional information, and details of the sealing and connection arrangement.

During routine maintenance, monitor compressor operating hours, lubricant condition, filter replacement history, and any abnormal pressure or temperature readings. Replace the filter according to the manufacturer’s maintenance schedule rather than relying on a universal interval.

For critical compressor installations, keeping suitable replacement filters in inventory can help reduce maintenance delays and support equipment availability.

Conclusion

The Ingersoll Rand 24900458 Oil Filter is a replacement filtration element designed for compatible industrial air compressors. By removing contaminants from circulating lubricant, it helps protect compressor components, maintain fluid cleanliness, and support reliable equipment operation.

With supplied dimensions of 118 × 118 × 364 mm and a listed weight of 2.54 kg, the filter can be identified for spare-parts inventory and maintenance planning. Before purchasing, verify the compressor model, serial number, and the relationship between the supplied additional reference 47639436001 and the 24900458 part number.