Company Information
E-mail		[email protected]
Mobile		+8615980777398
Whatsapp		+8615980777398
WeChat		15980777398

Product Overview

The Ingersoll Rand 47623601001 85574374 Hose is an industrial replacement hose designed for use in compatible Ingersoll Rand equipment and machinery. With a specified hose length of 38 inches and a shipping weight of 3 kg, this flexible component is intended to provide a reliable connection between equipment assemblies where flexibility, controlled routing, and mechanical movement accommodation are required.

Industrial machinery frequently combines rigid pipes, fittings, valves, filters, and flexible hoses to create complete air, fluid, lubrication, cooling, or auxiliary circuits. Flexible hoses are particularly useful in areas exposed to vibration or where connected components require a degree of movement. A properly selected hose can help maintain the intended connection while simplifying equipment assembly and maintenance.

The 47623601001 reference is associated with the 85574374 hose identification. When replacing an existing component, technicians should verify the complete part number, host equipment model, connection arrangement, original routing, and applicable operating conditions. The specified 38-inch length is an important identification characteristic, but hose length alone should not be used to determine compatibility.

At 38 inches, equivalent to approximately 965 mm, this hose provides a relatively long flexible connection path. Correct routing is therefore important to prevent excessive loops, twisting, bending, abrasion, or contact with moving equipment.

---

Technical Specifications

Parameter	Specification
Manufacturer	Ingersoll Rand
Main Part Number	47623601001
Associated Part Number	85574374
Product Type	Industrial Hose
Hose Length	38 in
Approximate Length	965 mm
Shipping Weight	3 kg
Application	Industrial Equipment and Flexible Connection Systems
Installation	Compatible Ingersoll Rand Equipment
Component Function	Flexible system connection
Replacement Type	Industrial replacement component

Specification Note: Exact hose material, internal diameter, fitting configuration, pressure rating, temperature rating, and compatible media should be verified against the applicable Ingersoll Rand equipment documentation and the original installed hose before replacement.

---

What Is the Ingersoll Rand 47623601001 85574374 Hose?

The Ingersoll Rand 47623601001 85574374 Hose is a flexible industrial component identified by the 47623601001 and 85574374 references.

Hoses are used throughout industrial equipment to create flexible connections between components. Unlike rigid piping, a hose can accommodate suitable vibration, minor movement, and installation tolerances while maintaining a continuous connection.

Depending on the host-machine configuration, an industrial hose may connect:

• Compressor assemblies
• Valves
• Filters
• Regulators
• Manifolds
• Cooling components
• Lubrication components
• Pneumatic equipment
• Fluid-handling components
• Auxiliary assemblies

The exact function of the 85574374 hose depends on the equipment in which it is installed. The complete application should therefore be verified before installation.

---

Primary Function of the Hose

The primary function of the 47623601001 85574374 is to provide a flexible connection between compatible equipment components.

A simplified arrangement can be represented as:

Source Component → 85574374 Hose → Receiving Component

The hose provides a continuous passage while allowing appropriate mechanical flexibility.

This can help accommodate:

• Equipment vibration
• Minor movement
• Thermal movement
• Installation tolerances
• Flexible routing
• Maintenance access

The hose should remain within the operating and installation limitations applicable to its specific application.

---

Working Principle

An industrial hose operates as a flexible passage between two connection points.

Depending on the host equipment, the connected medium may be compressed air, process fluid, lubricant, coolant, or another compatible medium.

The general operating arrangement is:

System Source → Flexible Hose → System Component

During operation, the hose contains the applicable medium while its flexible structure accommodates appropriate mechanical movement.

The component may experience several environmental and mechanical conditions, including:

• Internal pressure
• Temperature variation
• Vibration
• Repeated movement
• Installation bending
• External abrasion
• Mechanical stress

The specific pressure, temperature, and media limitations should be confirmed for the actual application.

---

Role in Industrial Equipment

Ingersoll Rand equipment can contain complex arrangements of compressors, valves, filters, separators, regulators, fittings, and auxiliary systems. Flexible hoses can form an important part of these connection networks.

The 47623601001 85574374 Hose can provide a flexible connection within compatible equipment where its complete specifications match the original installation.

A simplified equipment connection may be represented as:

Equipment Assembly → Fitting → Flexible Hose → Valve / Auxiliary Component

A hose should therefore be considered as part of the complete equipment circuit.

If the hose develops a leak or becomes mechanically damaged, the resulting loss of pressure or fluid can potentially affect other equipment components and overall machine operation.

---

38-Inch Hose Configuration

The specified length of the 85574374 hose is 38 inches.

Using the standard conversion:

38 × 25.4 mm = 965.2 mm

Therefore, the approximate hose length is 965 mm.

This length provides a relatively long flexible connection path and may be suitable for equipment layouts where connected components are separated by a moderate distance.

However, longer flexible connections require careful routing.

The hose should not be allowed to:

• Form unnecessary loops
• Hang against other equipment
• Contact rotating components
• Rub against sharp edges
• Become twisted
• Become excessively bent
• Experience unnecessary tension

The 38-inch length should be used to achieve the intended routing rather than creating excessive slack.

---

Industrial Applications

Compressor Systems

Industrial compressors contain multiple interconnected systems requiring dependable connections. Flexible hoses can be used where vibration and equipment movement must be accommodated.

The 85574374 hose should only be installed when its complete identification and specifications match the intended Ingersoll Rand equipment.

Pneumatic Equipment

Pneumatic systems require reliable connections for compressed air. Flexible hoses can connect valves, regulators, manifolds, and other pneumatic assemblies.

Fluid-Handling Systems

Industrial fluid circuits may incorporate flexible hoses where the hose construction is compatible with the intended medium.

The applicable media compatibility should be confirmed before installation.

Cooling Systems

Some machinery uses auxiliary cooling circuits that require flexible connections between components.

The 38-inch configuration can provide additional routing flexibility where required.

Lubrication Systems

Flexible connections can also appear in lubrication and auxiliary fluid circuits. The suitability of the hose depends on its construction and the intended application.

Equipment Maintenance

Hoses are common replacement components because they can deteriorate over time as a result of vibration, abrasion, temperature, environmental exposure, and normal aging.

---

Installation Guidelines

Verify the Complete Part Number

Before installation, verify:

• 47623601001
• 85574374
• Hose length
• Host equipment
• Connection arrangement
• Original routing

Inspect the Replacement Hose

Inspect the hose for:

• Cuts
• Cracks
• Abrasion
• Deformation
• Contamination
• Damaged ends
• Packaging damage

A visibly damaged hose should be evaluated before use.

Compare with the Original

Where practical, compare the replacement hose with the original component.

Check:

• Overall length
• Connection orientation
• Routing path
• Clearance
• Connection locations

Prevent Twisting

Do not twist the hose during installation.

Torsional stress can place unnecessary loads on the hose and connection points.

Avoid Sharp Bends

The hose should follow a smooth routing path without being forced into excessively tight bends.

Protect Against Abrasion

The hose should not continuously contact sheet metal, brackets, piping, wiring, or other surfaces that could damage its exterior.

---

38-Inch Hose Routing

The 38-inch length provides significant routing flexibility, but additional length can also increase the importance of correct installation.

A properly routed hose should:

• Follow a smooth path
• Maintain adequate clearance
• Avoid moving components
• Avoid sharp edges
• Avoid unnecessary loops
• Avoid excessive tension
• Remain accessible for inspection

Where the equipment design provides supports or routing brackets, these should be used according to the applicable installation procedure.

The objective is to prevent the hose from becoming an uncontrolled moving component during machine operation.

---

General Hose Replacement Procedure

Step 1: Shut Down the Equipment

Stop the equipment according to the applicable maintenance procedure.

Step 2: Isolate the Relevant Circuit

Isolate the associated air, fluid, lubrication, cooling, or auxiliary circuit as required.

Step 3: Release Stored Pressure

Ensure the relevant circuit is safely depressurized before disconnecting the hose.

Step 4: Record Existing Routing

Document the original hose routing and connection orientation before removal.

Step 5: Remove the Existing Hose

Disconnect the existing hose using appropriate tools and maintenance procedures.

Step 6: Inspect Adjacent Components

Inspect fittings, valves, connectors, clamps, and nearby components for damage or contamination.

Step 7: Install the 85574374

Install the 47623601001 85574374 hose using the correct orientation and connection arrangement.

Step 8: Verify Routing

Confirm that the 38-inch hose is not twisted, stretched, sharply bent, or exposed to unnecessary abrasion.

Step 9: Restore the Equipment

Return the equipment to service according to the applicable maintenance and commissioning procedure.

Step 10: Perform a Controlled Startup

Inspect the hose and connection points during startup for leakage, abnormal movement, or other installation problems.

---

Troubleshooting the 47623601001 85574374 Hose

Hose Leakage

Leakage can be associated with:

• Damaged hose material
• Loose connection
• Damaged fitting
• Seal deterioration
• Incorrect installation
• Excessive mechanical stress
• Hose aging

Inspect both the hose body and connection points.

Cracking

Surface cracks can indicate deterioration caused by age, environmental conditions, temperature, or mechanical stress.

A significantly damaged hose should be replaced according to the applicable maintenance procedure.

Abrasion

Repeated contact with brackets, piping, sheet metal, or other equipment can damage the hose surface.

If abrasion is detected, inspect and correct the routing.

Excessive Hose Movement

Unexpected movement may result from:

• Equipment vibration
• Pressure pulsation
• Incorrect routing
• Insufficient support
• Mechanical interference
• Improper installation

The underlying cause should be identified and corrected.

Kinking

Kinking can restrict the internal passage and increase mechanical stress.

If the hose has been severely kinked, inspect it for damage before continued operation.

Connection Problems

Repeated connection loosening can indicate vibration, misalignment, damaged fittings, or incorrect installation.

The complete connection assembly should be investigated instead of repeatedly tightening the connection without identifying the cause.

---

Preventive Maintenance

Visual Inspection

Inspect the hose periodically for:

• Cracks
• Cuts
• Abrasion
• Bulging
• Flattening
• Discoloration
• Leakage
• Connection damage

Check Hose Routing

Because the hose is 38 inches long, routing should be checked after maintenance work on nearby components.

Changes in equipment configuration can unintentionally introduce additional bending or contact.

Inspect Connections

Check both ends of the hose for leakage, looseness, corrosion, or physical damage.

Monitor Equipment Vibration

Changes in machinery vibration can increase stress on flexible connections.

Unusual hose movement should therefore be investigated.

Check Environmental Conditions

Inspect for exposure to excessive heat, chemicals, moisture, or other environmental conditions that may reduce hose service life.

---

Replacement Considerations

When sourcing the Ingersoll Rand 47623601001 85574374 Hose, verify the complete component identification and application requirements.

Identification Item	Specification
Manufacturer	Ingersoll Rand
Main Part Number	47623601001
Associated Part Number	85574374
Hose Length	38 in
Approximate Length	965 mm
Shipping Weight	3 kg
Product Type	Industrial Hose
Host Equipment	Verify before installation
Connection Configuration	Verify before installation
Application Medium	Verify before installation
Operating Requirements	Verify before installation

A suitable replacement should match the original application’s mechanical and operating requirements.

---

Physical Dimensions and Shipping Information

The supplied hose length is 38 inches, equivalent to 965.2 mm, or approximately 965 mm.

The listed shipping weight is 3 kg.

These specifications can be useful for:

• Spare-parts management
• Warehouse planning
• Purchasing
• Packaging
• Transportation
• International shipment preparation

The 3 kg value is the specified shipping weight and should not automatically be interpreted as the net weight of the hose itself.

---

Storage Recommendations

If the 47623601001 85574374 is stored as a spare, proper storage conditions should be maintained.

Recommended practices include:

• Store in a clean and dry location.
• Protect from direct sunlight.
• Avoid excessive heat.
• Keep away from aggressive chemicals.
• Prevent sharp bends during storage.
• Do not place heavy objects on the hose.
• Protect connection ends from contamination.
• Maintain clear part-number identification.

Good storage practices help preserve the condition of the hose until it is needed for maintenance.

---

Related Industrial Components

The hose may form part of a broader equipment assembly containing:

Related Component	General Function
Compressor Assembly	Generates compressed air
Air Filter	Filters incoming air
Oil Filter	Removes contaminants from lubricating oil
Air-Oil Separator	Separates oil from compressed air
Valve	Controls system flow
Regulator	Controls pressure
Manifold	Distributes air or fluid
Fitting	Provides mechanical connection
Cooling Assembly	Supports thermal management
Instrumentation	Monitors equipment conditions

The exact relationship between these components and the 85574374 hose depends on the host-equipment design.

---

Engineering Best Practices

Use Complete Part Identification

Maintenance and purchasing records should identify the component as 47623601001 / 85574374.

Match the Original Application

A visually similar 38-inch hose may have different material, fitting, pressure, temperature, or media characteristics.

Maintain Smooth Routing

The 38-inch length should provide the required connection distance without creating unnecessary slack or loops.

Avoid Twisting

The hose should be installed without torsional stress.

Maintain Adequate Clearance

Ensure that the hose remains clear of moving components, sharp edges, and other potential sources of mechanical damage.

Inspect Before Startup

After installation, inspect the hose and connection points before returning the equipment to normal operation.

Maintain Replacement Records

Record the part number, installation date, equipment location, and inspection findings as part of the equipment maintenance history.

---

Key Advantages

38-Inch Flexible Configuration

The 38 in hose length provides a relatively long flexible connection path for compatible industrial equipment.

Flexible Mechanical Connection

The hose can accommodate appropriate vibration and minor movement between connected components.

Practical Routing Length

The approximately 965 mm configuration can provide useful routing flexibility when equipment components are positioned farther apart.

Clear Replacement Identification

The 47623601001 / 85574374 identification helps maintenance personnel and purchasing teams identify the required component.

Industrial Maintenance Application

The hose can serve as a replacement component in compatible Ingersoll Rand equipment where its complete specifications match the original installation.

Useful Logistics Specification

The stated 3 kg shipping weight supports spare-parts inventory and transportation planning.

---

Technical FAQs

What is the Ingersoll Rand 47623601001 85574374?

The Ingersoll Rand 47623601001 85574374 is an industrial hose used as a flexible connection component in compatible Ingersoll Rand equipment.

What is the hose length?

The specified hose length is 38 inches, equivalent to approximately 965 mm.

What is the shipping weight?

The listed shipping weight is 3 kg.

What is the function of an industrial hose?

An industrial hose provides a flexible connection between compatible equipment components and allows an applicable medium to pass between connected points.

Why is the 38-inch length important?

The 38-inch configuration provides a longer flexible routing path for equipment layouts where connected components are positioned farther apart.

Can any 38-inch hose replace the 85574374?

No. Length alone does not establish compatibility. Material, fittings, internal dimensions, pressure rating, temperature rating, media compatibility, and host-equipment requirements should also be verified.

Why is hose routing important?

Incorrect routing can cause excessive bending, twisting, abrasion, vibration, or contact with moving components. Proper routing helps protect the hose and surrounding equipment.

What can cause premature hose failure?

Potential causes include abrasion, excessive bending, twisting, vibration, high temperature, chemical exposure, incorrect installation, excessive pressure, and normal material aging.

What should be done if leakage is detected?

Safely shut down and isolate the relevant system before inspection. A damaged hose or connection should be replaced or serviced according to the applicable equipment maintenance procedure.

Is 3 kg the net weight of the hose?

The supplied specification identifies 3 kg as the shipping weight. It should not automatically be interpreted as the net weight of the hose.

---

Conclusion

The Ingersoll Rand 47623601001 85574374 Hose is an industrial replacement hose specified with a 38-inch length and a 3 kg shipping weight. Its approximately 965 mm flexible configuration can provide a practical connection between compatible equipment components where a longer routing distance is required.

The 38-inch length provides useful installation flexibility, but correct routing remains essential. The hose should be installed without unnecessary twisting, sharp bending, excessive tension, or contact with moving or abrasive surfaces.

For procurement and maintenance purposes, the complete 47623601001 / 85574374 identification should be retained. Before installation, technicians should verify the host equipment, connection arrangement, hose construction, operating requirements, and intended routing rather than relying solely on the hose length.

With accurate identification, proper installation, suitable routing, regular inspection, and appropriate preventive maintenance, the Ingersoll Rand 47623601001 85574374 Hose can support reliable flexible connections within compatible industrial equipment and contribute to stable long-term machine operation.